Large reflecting surface (LRS) has emerged as a new solution to improve the energy and spectrum efficiency of wireless communication system. Most existing studies were conducted with an assumption of ideal hardware, and the impact of hardware impairments receives little attention. However, the non-negligible hardware impairments should be taken into consideration when we evaluate the system performance. In this paper, we consider an LRS assisted communication system with hardware impairments, and focus on the channel estimation study and the power scaling law analysis. First, with linear minimum mean square error estimation, we theoretically characterize the relationship between channel estimation performance and impairment level, number of reflecting elements, and pilot power. After that, we analyze the power scaling law and reveal that if the base station (BS) has perfect channel state information, the transmit power of user can be made inversely proportional to the number of BS antennas and the square of the number of reflecting elements with no reduction in performance; If the BS has imperfectly estimated channel state information, to achieve the same performance, the transmit power of user can be made inversely proportional to the square-root of the number of BS antennas and the square of the number of reflecting elements.
Recently, as explosive growth of mobile data traffic, the performance of wireless communication systems requires to be enhanced significantly in future. Intelligent reflecting surface (IRS) can be used as a promising way to improve the energy efficiency of wireless communications with less complexity and hardware cost. Most existing studies consider the cases with ideal hardware, however, both physical transceiver and IRS suffer from non-negligible hardware impairments which may greatly degrade the system performance. In this paper, by taking hardware impairments into consideration, we focus o…
Most works in IRS-assisted systems have ignored the impact of the inevitable residual hardware impairments (HWIs) at both the transceiver hardware and the IRS while any relevant works have addressed only simple scenarios, e.g., with single-antenna network nodes and/or without taking the randomness of phase noise at the IRS into account. In this work, we aim at filling up this gap by considering a general IRS-assisted multi-user (MU) multiple-input single-output (MISO) system with imperfect CSI and correlated Rayleigh fading. In parallel, we present a general computationally efficient methodolo…
Terahertz (THz) communications have been envisioned as a promising enabler to provide ultra-high data transmission for sixth generation (6G) wireless networks. To tackle the blockage vulnerability brought by severe path attenuation and poor diffraction of THz waves, an intelligent reflecting surface (IRS) is put forward to smartly control the incident THz waves by adjusting the phase shifts. In this paper, we firstly design an efficient hardware structure of graphene-based IRS with phase response up to 306.82 degrees. Subsequently, to characterize the capacity of the IRS-enabled THz multiple-i…
This letter aims to clarify the impact of channel aging and phase noise on the performance of intelligent reflecting surface-aided wireless systems. We first model mathematically the outdated channel state information (CSI) due to Doppler shifts and phase noise stemming from hardware impairment. Then, a closed-form expression of achievable spectral efficiency under noisy and aged CSI is theoretically derived. Some typical simulation results to numerically demonstrate the performance impact are illustrated.
Reconfigurable intelligent surface (RIS) can effectively control the wavefront of the impinging signals and has emerged as a cost-effective promising solution to improve the spectrum and energy efficiency of wireless systems. Most existing researches on RIS assume that the hardware operations are perfect. However, both physical transceiver and RIS suffer from inevitable hardware impairments in practice, which can lead to severe system performance degradation and increase the complexity of beamforming optimization. Consequently, the existing researches on RIS, including channel estimation, beam…
This letter investigates a non-orthogonal multiple access (NOMA) assisted millimeter-wave device-to-device (D2D) network practically limited by multiple interference noises, transceiver hardware impairments, imperfect successive interference cancellation, and channel state information mismatch. Generalized outage probability expressions for NOMA-D2D users are deduced and achieved results, validated by Monte Carlo simulations, are compared with the orthogonal multiple access to show the superior performance of the proposed network model
The use of large-scale antenna arrays can bring substantial improvements in energy and/or spectral efficiency to wireless systems due to the greatly improved spatial resolution and array gain. Recent works in the field of massive multiple-input multiple-output (MIMO) show that the user channels decorrelate when the number of antennas at the base stations (BSs) increases, thus strong signal gains are achievable with little inter-user interference. Since these results rely on asymptotics, it is important to investigate whether the conventional system models are reasonable in this asymptotic regi…
Terahertz (THz) communications have emerged as a promising candidate to support the heavy data traffic and exploding network capacity in the future 6G wireless networks. However, THz communications are facing many challenges for practical implementation, such as propagation loss, signal blockage, and hardware cost. In this article, an emerging paradigm of intelligent reflecting surface (IRS) assisted THz communications is analyzed, to address the above issues, by leveraging the joint active and passive beamforming to enhance the communication quality and reduce overheads. Aiming at practical i…
It is challenging to precisely configure the phase shifts of the reflecting elements at the reconfigurable intelligent surface (RIS) due to inherent hardware impairments (HIs). In this paper, the mean square error (MSE) performance is investigated in an RIS-aided single-user multiple-input multipleoutput (MIMO) communication system with transceiver HIs and RIS phase noise. We aim to jointly optimize the transmit precoder, linear received equalizer, and RIS reflecting matrices to minimize the MSE. To tackle this problem, an iterative algorithm is proposed, wherein the beamforming matrices are a…
Reconfigurable intelligent surface (RIS) or intelligent reflecting surface (IRS) has recently been envisioned as one of the most promising technologies in the future sixth-generation (6G) communications. In this paper, we consider the joint optimization of the transmit beamforming at the base station (BS) and the phase shifts at the RIS for an RIS-aided wireless communication system with both hardware impairments and imperfect channel state information (CSI). Specifically, we assume both the BS-user channel and the BS-RIS-user channel are imperfect due to the channel estimation error, and we c…
In this letter, improving the security of an intelligent reflecting surface (IRS) assisted multiple-input single-output (MISO) communication system is studied. Different from the ideal assumption in existing literatures that full eavesdropper's (Eve's) channel state information (CSI) is available, we consider a more practical scenario without Eve's CSI. To enhance the security of this system given a total transmit power at transmitter (Alice), we propose a joint beamforming and jamming approach, in which a minimum transmit power is firstly optimized at Alice so as to meet the quality of servic…
Massive multiple-input multiple-output (MIMO) systems are cellular networks where the base stations (BSs) are equipped with unconventionally many antennas, deployed on co-located or distributed arrays. Huge spatial degrees-of-freedom are achieved by coherent processing over these massive arrays, which provide strong signal gains, resilience to imperfect channel knowledge, and low interference. This comes at the price of more infrastructure; the hardware cost and circuit power consumption scale linearly/affinely with the number of BS antennas $N$. Hence, the key to cost-efficient deployment of …
Intelligent surfaces comprising of cost effective, nearly passive, and reconfigurable unit elements are lately gaining increasing interest due to their potential in enabling fully programmable wireless environments. They are envisioned to offer environmental intelligence for diverse communication objectives, when coated on various objects of the deployment area of interest. To achieve this overarching goal, the channels where the Reconfigurable Intelligent Surfaces (RISs) are involved need to be in principle estimated. However, this is a challenging task with the currently available hardware R…
Intelligent reflecting surface (IRS) that enables the control of the wireless propagation environment has been looked upon as a promising technology for boosting the spectrum and energy efficiency in future wireless communication systems. Prior works on IRS are mainly based on the ideal phase shift model assuming the full signal reflection by each of the elements regardless of its phase shift, which, however, is practically difficult to realize. In contrast, we propose in this paper a practical phase shift model that captures the phase-dependent amplitude variation in the element-wise reflecti…
Intelligent reflecting surface (IRS) that enables the control of wireless propagation environment has recently emerged as a promising cost-effective technology for boosting the spectrum and energy efficiency in future wireless communication systems. Prior works on IRS are mainly based on the ideal phase shift model assuming the full signal reflection by each of the elements regardless of its phase shift, which, however, is practically difficult to realize. In contrast, we propose in this paper the practical phase shift model that captures the phase-dependent amplitude variation in the element-…
The paper studies a reconfigurable intelligent surface (RIS)-assisted multi-user uplink massive multiple-input multiple-output (MIMO) system with imperfect hardware. At the RIS, the paper considers phase noise, while at the base station, the paper takes into consideration the radio frequency impairments and low-resolution analog-to-digital converters. The paper derives approximate expressions for the ergodic achievable rate in closed forms under Rician fading channels. For the cases of infinite numbers of antennas and infinite numbers of reflecting elements, asymptotic data rates are derived t…
Although the fifth-generation (5G) technologies will significantly improve the spectrum and energy efficiency of today's wireless communication networks, their high complexity and hardware cost as well as increasingly more energy consumption are still crucial issues to be solved. Furthermore, despite that such technologies are generally capable of adapting to the space and time varying wireless environment, the signal propagation over it is essentially random and largely uncontrollable. Recently, intelligent reflecting surface (IRS) has been proposed as a revolutionizing solution to address th…
Intelligent reflecting surface (IRS) is a novel burgeoning concept, which possesses advantages in enhancing wireless communication and user localization, while maintaining low hardware cost and energy consumption. Herein, we establish an IRS-aided mmWave-MIMO based joint localization and communication system (IMM-JLCS), and probe into its performance evaluation and optimization design. Specifically, first, we provide the signal, channel and estimation error models, and contrive the working process of the IMM-JLCS in detail. Then, by configuring appropriate IRS phase shifts, we derive the close…
Recently, intelligent reflecting surface (IRS) has emerged as an appealing technique that enables wireless communications with low hardware cost and low power consumption. In this letter, we consider an IRS-assisted point-to-point multi-input multi-output (MIMO) system, where a source communicates with its destination with the help of an IRS. Our goal is to maximize the spectral efficiency of this system by jointly optimizing the (active) precoding at the source and the (passive) phase shifters (PSs) at the IRS. However, this turns out to be an intractable mixed integer non-convex optimization…
In this letter, we analyze the spectral and energy efficiency of an intelligent reflecting surface (IRS)-assisted multiple-input single-output (MISO) downlink system with hardware impairments. An extended error vector magnitude (EEVM) model is utilized to characterize the impact of radio-frequency (RF) impairments at the access point (AP) and phase noise is considered for the imperfect IRS. We show that the spectral efficiency is limited due to the hardware impairments even when the numbers of AP antennas and IRS elements grow infinitely large, which is in contrast with the conventional case w…
Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing c…
Hardware imperfections can significantly reduce the performance of full-duplex wireless systems by introducing non-idealities and random effects that make it challenging to fully suppress self-interference. Previous research has mostly focused on analyzing the impact of hardware imperfections on full-duplex systems, based on simulations and theoretical models. In this paper, we follow a measurement-based approach to experimentally identify and isolate these hardware imperfections leading to residual self-interference in full-duplex nodes. Our measurements show the important role of images aris…
Reconfigurable intelligent surfaces (RISs) have been considered as a promising technology for the sixth-generation (6G) wireless networks that can control wireless channels in a desirable way and significantly enhance the network performance. Simultaneous transmitting and reflecting-RISs (STAR-RISs) can overcome limitation of reflecting-only RISs by leveraging the higher design flexibility and full-space coverage. Despite the benefits, the modeling and analysis of STAR-RISs are complicated because of various control parameters for both transmission and reflection links. In this article, a gene…
University of Macau（澳门大学）；National University of Singapore（新加坡国立大学）
Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be effi…
Intelligent reflecting surface (IRS) is a promising technology for achieving high spectrum efficiency in future wireless networks by leveraging massive low-cost reflecting elements with each reflecting the incident signal with a proper phase shift. However, prior works on IRS are mainly based on the optimization of infinite-resolution phase shifters which are practically infeasible due to hardware imperfections. In contrast, we study in this paper an IRS-aided wireless network, where an IRS with only finite-resolution phase shifter available at each element is deployed to assist in the communi…
We focus on the realistic maximization of the uplink minimum signal-to-interference-plus-noise ratio (SINR) of a general multiple-input single-output (MISO) system assisted by an intelligent reflecting surface (IRS) in the large system limit accounting for HIs. In particular, we introduce the HIs at both the IRS (IRS-HIs) and the transceiver HIs (AT-HIs), usually neglected despite their inevitable impact. Specifically, the deterministic equivalent analysis enables the derivation of the asymptotic weighted maximum-minimum SINR with HIs by jointly optimizing the HIs-aware receiver, the transmit …
Physical transceivers have hardware impairments that create distortions which degrade the performance of communication systems. The vast majority of technical contributions in the area of relaying neglect hardware impairments and, thus, assumes ideal hardware. Such approximations make sense in low-rate systems, but can lead to very misleading results when analyzing future high-rate systems. This paper quantifies the impact of hardware impairments on dual-hop relaying, for both amplify-and-forward and decode-and-forward protocols. The outage probability (OP) in these practical scenarios is a fu…
In this paper, we focus on intelligent reflecting surface (IRS) assisted multi-antenna communications with transceiver hardware impairments encountered in practice. In particular, we aim to maximize the received signal-to-noise ratio (SNR) taking into account the impact of hardware impairments, where the source transmit beamforming and the IRS reflect beamforming are jointly designed under the proposed optimization framework. To circumvent the non-convexity of the formulated design problem, we first derive a closed-form optimal solution to the source transmit beamforming. Then, for the optimiz…
This work examines the performance gain achieved by deploying an intelligent reflecting surface (IRS) in covert communications. To this end, we formulate the joint design of the transmit power and the IRS reflection coefficients by taking into account the communication covertness for the cases with global channel state information (CSI) and without a warden's instantaneous CSI. For the case of global CSI, we first prove that perfect covertness is achievable with the aid of the IRS even for a single-antenna transmitter, which is impossible without an IRS. Then, we develop a penalty successive c…
This paper investigates multiuser multi-input single-output downlink symbiotic radio communication systems assisted by an intelligent reflecting surface (IRS). Different from existing methods ideally assuming the secondary user (SU) can jointly decode information symbols from both the access point (AP) and the IRS via multiuser detection, we consider a more practical SU that only non-coherent detection is available. To characterize the non-coherent decoding performance, a practical upper bound of the average symbol error rate (SER) is derived. Subsequently, we jointly optimize the beamformer a…
Intelligent reflecting surface (IRS) has emerged as a key enabling technology to realize smart and reconfigurable radio environment for wireless communications, by digitally controlling the signal reflection via a large number of passive reflecting elements in real-time. Different from conventional wireless communication techniques that only adapt to but have no or limited control over dynamic wireless channels, IRS provides a new and cost-effective means to combat the wireless channel impairments in a proactive manner. However, despite its great potential, IRS faces new and unique challenges …
Smart and reconfigurable wireless communication environments can be established by exploiting well-designed intelligent reflecting surfaces (IRSs) to shape the communication channels. In this paper, we investigate how multiple IRSs affect the performance of multi-user full-duplex communication systems under hardware impairment at each node, wherein the base station (BS) and the uplink users are subject to maximum transmission power constraints. Firstly, the uplink-downlink system weighted sum-rate (SWSR) is derived which serves as a system performance metric. Then, we formulate the resource al…
This paper investigates hardware cyber-security risks associated with channel decoders, which are commonly acquired as a black box in semiconductor industry. It is shown that channel decoders are potentially attractive targets for hardware cyber-security attacks and can be easily embedded with malicious blocks. Several attack scenarios are considered in this work and suitable methods for mitigating the risks are proposed. These methods are based on randomizing the inputs of the channel decoder to obstruct the communications between attackers and the malicious blocks, ideally without changing t…
In this paper, we study cross-layer optimization of low-power wireless links for reliability-aware applications while considering both the constraints and the non-ideal characteristics of the hardware in Internet-of-things (IoT) devices. Specifically, we define an energy consumption (EC) model that captures the energy cost---of transceiver circuitry, power amplifier, packet error statistics, packet overhead, etc.---in delivering a useful data bit. We derive the EC models for an ideal and two realistic non-linear power amplifier models. To incorporate packet error statistics, we develop a simpl…
Reconfigurable intelligent surfaces (RISs) are envisioned as a promising technology for future wireless communications. With various hardware realizations, RISs can work under different modes (reflective/transmissive/hybrid) or have different architectures (single/group/fully-connected). However, most existing research focused on single-connected reflective RISs, mathematically characterized by diagonal phase shift matrices, while there is a lack of a comprehensive study for RISs unifying different modes/architectures. In this paper, we solve this issue by analyzing and proposing a general RIS…
Beijing Institute of Technology（北京理工大学）；CNRS（法国国家科学研究中心）；CentraleSupélec（中央理工-高等电力学院）；Université Paris-Saclay（巴黎-萨克雷大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
Integrating large intelligent reflecting surfaces (IRS) into millimeter-wave (mmWave) massive multi-input-multi-ouput (MIMO) has been a promising approach for improved coverage and throughput. Most existing work assumes the ideal channel estimation, which can be challenging due to the high-dimensional cascaded MIMO channels and passive reflecting elements. Therefore, this paper proposes a deep denoising neural network assisted compressive channel estimation for mmWave IRS systems to reduce the training overhead. Specifically, we first introduce a hybrid passive/active IRS architecture, where v…
Impairments baseband model in-phase and quadrature-phase Imbalance (IQI) and Residual hardware impairments (RHI) are two key factors degrading the performance of wireless communication systems (WCSs), particularly when high-frequency bands are employed, as in 5G systems and beyond. The impact of either IQI or RHI on the performance of various WCSs has been investigated exclusively in a separate way. To fill this gap, in this paper, the joint effect of both IQI and RHI on the performance of a WCS subject to the sum of Fox's H-function fading model (SFHF) is investigated. Such a fading model gen…
Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces
Hong Kong Jockey Club STEM Lab of Smart City and the Department of Computer Science, City University of Hong Kong（香港城市大学计算机科学与智能城市联合实验室）；School of Data Science, Lingnan University（岭南大学数据科学学院）；State Key Laboratory of Novel Software Technology, Nanjing University（南京大学软件新技术国家重点实验室）；Institute of Intelligent Networks and Communications (NINE), Nanjing University (Suzhou Campus)（南京大学苏州校区智能网络与通信研究院）
A Survey of Deep Learning Architectures for Intelligent Reflecting Surfaces
Department of Electrical and Electronics Engineering, Istinye University（伊斯坦布尔大学电气与电子工程系）；University of Luxembourg（卢森堡大学）；United States DEVCOM Army Research Laboratory（美国国防部高级研究实验室）
Hardware impairments in physical transceivers are known to have a deleterious effect on communication systems; however, very few contributions have investigated their impact on relaying. This paper quantifies the impact of transceiver impairments in a two-way amplify-and-forward configuration. More specifically, the effective signal-to-noise-and-distortion ratios at both transmitter nodes are obtained. These are used to deduce exact and asymptotic closed-form expressions for the outage probabilities (OPs), as well as tractable formulations for the symbol error rates (SERs). It is explicitly sh…
Due to hardware limitations, the phase shifts of the reflecting elements of reconfigurable intelligent surfaces (RISs) need to be quantized into discrete values. This letter aims to unveil the minimum required number of phase quantization levels $L$ in order to achieve the full diversity order in RIS-assisted wireless communication systems. With the aid of an upper bound of the outage probability, we first prove that the full diversity order is achievable provided that $L$ is not less than three. If $L=2$, on the other hand, we prove that the achievable diversity order cannot exceed $(N+1)/2$,…
In this paper, we consider an intelligent reflecting surface (IRS) assisted Guassian multiple-input multiple-output (MIMO) wiretap channel (WTC), and focus on enhancing its secrecy rate. Due to MIMO setting, all the existing solutions for enhancing the secrecy rate over multiple-input single-output WTC completely fall to this work. Furthermore, all the existing studies are simply based on an ideal assumption that full channel state information (CSI) of eavesdropper (Ev) is available. Therefore, we propose numerical solutions to enhance the secrecy rate of this channel under both full and no Ev…
A novel simultaneously transmitting and reflecting (STAR) system design relying on reconfigurable intelligent surfaces (RISs) is conceived. First, an existing prototype is reviewed and the potential benefits of STAR-RISs are discussed. Then, the key differences between conventional reflecting-only RISs and STAR-RISs are identified from the perspectives of hardware design, physics principles, and communication system design. Furthermore, the basic signal model of STAR-RISs is introduced, and three practical protocols are proposed for their operation, namely energy splitting, mode switching, and…
This letter focuses on the non-convex joint optimization with a dynamic resource of multi-user for an intelligent reflecting surface-enhanced mmWave system, where all users are concentrated on the unique cluster beam. Firstly, the objective function of the above non-linear problem is converted into a quadratic programming form under the quality of service constraints. Further, a multi-blocks alternating optimization framework with dynamic power allocation is proposed to obtain the maximum sum-rate, where the relaxed ADMM algorithm is adopted to tackle the optimal fulldigital precoder and the c…
In this paper, we investigate a reconfigurable intelligent surface (RIS)-aided multiuser full-duplex secure communication system with hardware impairments at transceivers and RIS, where multiple eavesdroppers overhear the two-way transmitted signals simultaneously, and an RIS is applied to enhance the secrecy performance. Aiming at maximizing the sum secrecy rate (SSR), a joint optimization problem of the transmit beamforming at the base station (BS) and the reflecting beamforming at the RIS is formulated under the transmit power constraint of the BS and the unit modulus constraint of the phas…
Transceiver hardware impairments (e.g., phase noise, in-phase/quadrature-phase (I/Q) imbalance, amplifier non-linearities, and quantization errors) have obvious degradation effects on the performance of wireless communications. While prior works have improved our knowledge on the influence of hardware impairments of single-user multiple-input multiple-output (MIMO) systems over Rayleigh fading channels, an analysis encompassing the Rician fading channel is not yet available. In this paper, we pursue a detailed analysis of regular and large-scale (LS) MIMO systems over Rician fading channels by…
