A novel simultaneously transmitting and reflecting (STAR) system design relying on reconfigurable intelligent surfaces (RISs) is conceived. First, an existing prototype is reviewed and the potential benefits of STAR-RISs are discussed. Then, the key differences between conventional reflecting-only RISs and STAR-RISs are identified from the perspectives of hardware design, physics principles, and communication system design. Furthermore, the basic signal model of STAR-RISs is introduced, and three practical protocols are proposed for their operation, namely energy splitting, mode switching, and time switching. Based on the proposed protocols, a range of promising application scenarios are put forward for integrating STAR-RISs into next-generation wireless networks. By considering the downlink of a typical RIS-aided multiple-input single-output (MISO) system, numerical case studies are provided for revealing the superiority of STAR-RISs over other baselines, when employing the proposed protocols. Finally, several open research problems are discussed.
This paper proposes a new three dimensional (3D) networking architecture enabled by aerial intelligent reflecting surface (AIRS) to achieve panoramic signal reflection from the sky. Compared to the conventional terrestrial IRS, AIRS not only enjoys higher deployment flexibility, but also is able to achieve 360$^\circ$ panoramic full-angle reflection and requires fewer reflections in general due to its higher likelihood of having line of sight (LoS) links with the ground nodes. We focus on the problem to maximize the worst-case signal-to-noise ratio (SNR) in a given coverage area by jointly opt…
The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) wave. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In th…
This paper proposes a scalable channel estimation and reflection optimization framework for reconfigurable intelligent surface (RIS)-enhanced orthogonal frequency division multiplexing (OFDM) systems. Specifically, the proposed scheme firstly generates a training set of RIS reflection coefficient vectors offline. For each RIS reflection coefficient vector in the training set, the proposed scheme estimates only the end-to-end composite channel and then performs the transmit power allocation. As a result, the RIS reflection optimization is simplified by searching for the optimal reflection coeff…
Most prior works on intelligent reflecting surface (IRS) merely consider point-to-point communications, including a single user, for ease of analysis. Nevertheless, a practical wireless system needs to accommodate multiple users simultaneously. Due to the lack of frequency-selective reflection, namely the set of phase shifts cannot be different across frequency subchannels, the integration of IRS imposes a fundamental challenge to frequency-multiplexing approaches such as frequency-division multiple access (FDMA) and the widely adopted technique called orthogonal FDMA (OFDMA). It motivates us …
Intelligent reflecting surface (IRS) has emerged as a promising technique for wireless communication networks. By dynamically tuning the reflection amplitudes/phase shifts of a large number of passive elements, IRS enables flexible wireless channel control and configuration, and thereby enhances the wireless signal transmission rate and reliability significantly. Despite the vast literature on designing and optimizing assorted IRS-aided wireless systems, prior works have mainly focused on enhancing wireless links with single signal reflection only by one or multiple IRSs, which may be insuffic…
In the intelligent reflecting surface (IRS)-enhanced wireless communication system, channel state information (CSI) is of paramount importance for achieving the passive beamforming gain of IRS, which, however, is a practically challenging task due to its massive number of passive elements without transmitting/receiving capabilities. In this letter, we propose a practical transmission protocol to execute channel estimation and reflection optimization successively for an IRS-enhanced orthogonal frequency division multiplexing (OFDM) system. Under the unit-modulus constraint, a novel reflection p…
In this paper, we model, analyze and optimize the multi-user and multi-order-reflection (MUMOR) intelligent reflecting surface (IRS) networks. We first derive a complete MUMOR IRS network model applicable for the arbitrary times of reflections, size and number of IRSs/reflectors. The optimal condition for achieving sum-rate upper bound with one IRS in a closed-form function and the analytical condition to achieve interference-free transmission are derived, respectively. Leveraging this optimal condition, we obtain the MUMOR sum-rate upper bound of the IRS network with different network topolog…
Internet-of-Everything (IoE) has gradually been recognized as an integral part of future wireless networks. In IoE, there can be an ultra-massive number of smart devices of various types to be served, imposing multi-dimensional requirements on wireless communication, sensing, and security. In this article, we provide a tutorial overview of the promising intelligent reflection communication (IRC) technologies, including reconfigurable intelligent surface (RIS) and ambient backscatter communication (AmBC), to support the requirements of IoE applications beyond the fifth-generation (5G) wireless …
Intelligent reflecting surface (IRS) is envisioned to become a key technology for the upcoming six-generation (6G) wireless system due to its potential of reaping high performance in a power-efficient and cost-efficient way. With its disruptive capability and hardware constraint, the integration of IRS imposes some fundamental particularities on the coordination of multi-user signal transmission. Consequently, the conventional orthogonal and non-orthogonal multiple-access schemes are hard to directly apply because of the joint optimization of active beamforming at the base station and passive …
In this paper, a novel approach that uses an unmanned aerial vehicle (UAV)-carried intelligent reflector (IR) is proposed to enhance the performance of millimeter wave (mmW) networks. In particular, the UAV-IR is used to intelligently reflect mmW beamforming signals from a base station towards a mobile outdoor user, while harvesting energy from mmW signals to power the IR. To maintain a line-of-sight (LOS) channel, a reinforcement learning (RL) approach, based on Q-learning and neural networks, is proposed to model the propagation environment, such that the location and reflection coefficient …
In this work, we investigate a novel simultaneous transmission and reflection reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output downlink system, where three practical transmission protocols, namely, energy splitting (ES), mode selection (MS), and time splitting (TS), are studied. For the system under consideration, we maximize the weighted sum rate with multiple coupled variables. To solve this optimization problem, a block coordinate descent algorithm is proposed to reformulate this problem and design the precoding matrices and the transmitting and reflecting co…
Recent considerations for reconfigurable intelligent surfaces (RISs) assume that RISs can convey information by reflection without the need of transmit radio frequency chains, which, however, is a challenging task. In this paper, we propose an RIS-enhanced multiple-input single-output system with reflection pattern modulation, where the RIS can configure its reflection state for boosting the received signal power via passive beamforming and simultaneously conveying its own information via reflection. We formulate an optimization problem to maximize the average received signal power by jointly …
Indexed modulation (IM) is an evolving technique that has become popular due to its ability of parallel data communication over distinct combinations of transmission entities. In this article, we first provide a comprehensive survey of IM-enabled multiple access (MA) techniques, emphasizing the shortcomings of existing non-indexed MA schemes. Theoretical comparisons are presented to show how the notion of indexing eliminates the limitations of non-indexed solutions. We also discuss the benefits that the utilization of a reconfigurable intelligent surface (RIS) can offer when deployed as an ind…
In this paper, we consider intelligent omni-surfaces (IOSs), which are capable of simultaneously reflecting and refracting electromagnetic waves. We focus our attention on the multiple-input multiple-output (MIMO) broadcast channel, and we introduce an algorithm for jointly optimizing the covariance matrix at the base station, the matrix of reflection and transmission coefficients at the IOS, and the amount of power that is reflected and refracted from the IOS. The distinguishable feature of this work lies in taking into account that the reflection and transmission coefficients of an IOS are t…
Bistatic backscatter communication (BackCom) allows passive tags to transmit over extended ranges, but at the cost of having carrier emitters either transmitting at high powers or being deployed very close to tags. In this paper, we examine how the presence of an intelligent reflecting surface (IRS) could benefit the bistatic BackCom system. We study the transmit power minimization problem at the carrier emitter, where its transmit beamforming vector is jointly optimized with the IRS phase shifts, whilst guaranteeing a required BackCom performance. A unique feature in this system setup is the …
In this paper, the problem of training signal design for intelligent reflecting surface (IRS)-assisted millimeter-wave (mmWave) communication under a sparse channel model is considered. The problem is approached based on the Cram$\acute{\text{e}}$r-Rao lower bound (CRB) on the mean-square error (MSE) of channel estimation. By exploiting the sparse structure of mmWave channels, the CRB for the channel parameter composed of path gains and path angles is derived in closed form under Bayesian and hybrid parameter assumptions. Based on the derivation and analysis, an IRS reflection pattern design m…
Large intelligent surface/antennas (LISA), a two-dimensional artificial structure with a large number of reflective-surface/antenna elements, is a promising reflective radio technology to construct programmable wireless environments in a smart way. Specifically, each element of the LISA adjusts the reflection of the incident electromagnetic waves with unnatural properties, such as negative refraction, perfect absorption, and anomalous reflection, thus the wireless environments can be software-defined according to various design objectives. In this paper, we introduce the reflective radio basic…
Intelligent reflecting surface (IRS) is a promising new paradigm to achieve high spectral and energy efficiency for future wireless networks by reconfiguring the wireless signal propagation via passive reflection. To reap the potential gains of IRS, channel state information (CSI) is essential, whereas channel estimation errors are inevitable in practice due to limited channel training resources. In this paper, in order to optimize the performance of IRS-aided multiuser systems with imperfect CSI, we propose to jointly design the active transmit precoding at the access point (AP) and passive r…
Intelligent reflecting surface (IRS) has emerged as a promising technique to enhance wireless communication performance cost effectively. The existing literature has mainly considered IRS being deployed near user terminals to improve their performance. However, this approach may incur a high cost if IRSs need to be densely deployed in the network to cater to random user locations. To avoid such high deployment cost, in this paper we consider a new IRS aided wireless network architecture, where IRSs are deployed in the vicinity of each base station (BS) to assist in its communications with dist…
Recently, terahertz (THz) communication has drawn considerable attention as one of the promising technologies for the future wireless communications owning to its ultra-wide bandwidth. Nonetheless, one major obstacle that prevents the actual deployment of THz lies in its inherent huge attenuation. Intelligent reflecting surface (IRS) and multiple-input multiple-output (MIMO) represent two effective solutions for compensating the large pathloss in THz systems. In this paper, we consider an IRS-aided multi-user THz MIMO system with orthogonal frequency division multiple access, where the sparse …
Reconfigurable intelligent surface (RIS) has been recognized as an essential enabling technique for the sixth-generation (6G) mobile communication network. Specifically, an RIS is comprised of a large number of small and low-cost reflecting elements whose parameters are dynamically adjustable with a programmable controller. Each of these elements can effectively reflect a phase-shifted version of the incident electromagnetic wave. By adjusting the wave phases in real time, the propagation environment of the reflected signals can be dynamically reconfigured to enhance communication reliability,…
Intelligent reflecting surface (IRS) has recently received much attention from the research community due to its potential to achieve high spectral and power efficiency cost-effectively. In addition to traditional cellular networks, the use of IRS in vehicular networks is also considered. Prior works on IRS-aided vehicle-to-everything communications focus on deploying reflection surfaces on the facades of buildings along the road for sidelink performance enhancement. This paper goes beyond the state of the art by presenting a novel paradigm coined Intelligent Reflecting Vehicle Surface (IRVS).…
Indoor millimeter-wave (mmWave) environment channels are typically sparsely-scattered and dominated by a strong line-of-sight (LOS) path. Therefore, communication over such channels is in general extremely difficult when the LOS path is not present. However, the recent introduction of reconfigurable intelligent surfaces (RISs), which have the potential to influence the propagation environment in a controlled manner, has the potential to change the previous paradigm. Motivated by this, we study the channel capacity optimization utilizing RISs in indoor mmWave environments where no LOS path is p…
In this paper, the adoption of an intelligent reflecting surface (IRS) for multiple single-antenna source terminal (ST)-DT pairs in two-hop networks is investigated. Different from the previous studies on IRS that merely focused on tuning the reflection coefficient of all the reflection elements at IRS, in this paper, we consider the true reflection resource management. Specifically, the true reflection resource management can be realized via trigger module selection based on our proposed IRS architecture that all the reflection elements are partially controlled by multiple parallel switches o…
This paper investigates the downlink communications of intelligent reflecting surface (IRS) assisted non-orthogonal multiple access (NOMA) systems. To maximize the system throughput, we formulate a joint optimization problem over the channel assignment, decoding order of NOMA users, power allocation, and reflection coefficients. The formulated problem is proved to be NP-hard. To tackle this problem, a three-step novel resource allocation algorithm is proposed. Firstly, the channel assignment problem is solved by a many-to-one matching algorithm. Secondly, by considering the IRS reflection coef…
In this work we address the distance dependence of reconfigurable intelligent surfaces (RIS). As differentiating factor to other works in the literature, we focus on the array near-field, what allows us to comprehend and expose the promising potential of RIS. The latter mostly implies an interplay between the physical size of the RIS and the size of the Fresnel zones at the RIS location, highlighting the major role of the phase. To be specific, the point-like (or zero-dimensional) conventional scattering characterization results in the well-known dependence with the fourth power of the distanc…
Considering intelligent reflecting surface (IRS), we study a multi-cluster multiple-input-single-output (MISO) non-orthogonal multiple access (NOMA) downlink communication network. In the network, an IRS assists the communication from the base station (BS) to all users by passive beamforming. Our goal is to minimize the total transmit power by jointly optimizing the transmit beamforming vectors at the BS and the reflection coefficient vector at the IRS. Because of the restrictions on the IRS reflection amplitudes and phase shifts, the formulated quadratically constrained quadratic problem is h…
Reconfigurable intelligent surface (RIS) is a promising technology for establishing spectral- and energy-efficient wireless networks. In this paper, we study RIS-enhanced orthogonal frequency division multiplexing (OFDM) communications, which generalize the existing RIS-driven context focusing only on frequency-flat channels. Firstly, we introduce the delay adjustable metasurface (DAM) relying on varactor diodes. In contrast to existing reflecting elements, each one in DAM is capable of storing and retrieving the impinging electromagnetic waves upon dynamically controlling its electromagnetica…
This work examines the performance gain achieved by deploying an intelligent reflecting surface (IRS) in covert communications. To this end, we formulate the joint design of the transmit power and the IRS reflection coefficients by taking into account the communication covertness for the cases with global channel state information (CSI) and without a warden's instantaneous CSI. For the case of global CSI, we first prove that perfect covertness is achievable with the aid of the IRS even for a single-antenna transmitter, which is impossible without an IRS. Then, we develop a penalty successive c…
University of Macau（澳门大学）；National University of Singapore（新加坡国立大学）
Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal prorogation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be effi…
In this paper, we consider an intelligent reflecting surface (IRS)-aided single-user system where an IRS with discrete phase shifts is deployed to assist the uplink communication. A practical transmission protocol is proposed to execute channel estimation and passive beamforming successively. To minimize the mean square error (MSE) of channel estimation, we first formulate an optimization problem for designing the IRS reflection pattern in the training phase under the constraints of unit-modulus, discrete phase, and full rank. This problem, however, is NP-hard and thus difficult to solve in ge…
The promising coverage and spectral efficiency gains of intelligent reflecting surfaces (IRSs) are attracting increasing interest. In order to realize these surfaces in practice, however, several challenges need to be addressed. One of these main challenges is how to configure the reflecting coefficients on these passive surfaces without requiring massive channel estimation or beam training overhead. Earlier work suggested leveraging supervised learning tools to design the IRS reflection matrices. While this approach has the potential of reducing the beam training overhead, it requires collect…
Intelligent reflecting surface (IRS) is a promising technology to improve the performance of backscatter communication systems by smartly reconfiguring the multi-reflection channel. To fully exploit the passive beamforming gain of IRS in backscatter communication, channel state information (CSI) is indispensable but more practically challenging to acquire than conventional IRS-assisted systems, since IRS passively reflects signals over both the forward and backward (backscattering) links between the reader and tag. To address this issue, we propose in this letter a new and efficient channel es…
Intelligent reflecting surface (IRS) can be densely deployed in wireless networks to significantly enhance the communication channels. In this letter, we consider the downlink transmission from a multi-antenna base station (BS) to a single-antenna user, by exploiting the cooperative passive beamforming (CPB) and line-of-sight (LoS) path diversity gains of multi-IRS signal reflection. Unlike existing works where only one single multi-IRS reflection path from the BS to user is selected, we propose a new and more general multi-path beam routing scheme. Specifically, the BS sends the user's inform…
Reconfigurable intelligent surface (RIS)-empowered communication is a revolutionary technology that enables to manipulate wireless propagation environment via smartly controllable low-cost reflecting surfaces. However, in order to outperform conventional communication systems, an RIS-aided system with solely passive reflection requires an extremely large surface. To meet this challenge, the concept of active RIS, which performs simultaneous amplification and reflection on the incident signal at the expense of additional power consumption, has been recently introduced. In this paper, deploying …
In reconfigurable intelligent surfaces (RISs) aided communications, the existing passive beamforming (PB) design involves polynomial complexity in the number of reflecting elements, and thus is difficult to implement due to a massive number of reflecting elements. To overcome this difficulty, we propose a reflection-angle-based cascaded channel model by adopting the generalized Snell's law, in which the dimension of the variable space involved in optimization is significantly reduced, resulting in a simplified hierarchical passive beamforming (HPB) design. We develop an efficient two-stage HPB…
Reconfigurable intelligent surface (RIS) is an emerging technology that is under investigation for different applications in wireless communications. RISs are often analyzed and optimized by considering simplified electromagnetic reradiation models. In this chapter, we aim to study the impact of realistic reradiation models for RISs as a function of the sub-wavelength inter-distance between nearby elements of the RIS, the quantization levels of the reflection coefficients, the interplay between the amplitude and phase of the reflection coefficients, and the presence of electromagnetic interfer…
Reconfigurable intelligent surfaces (RISs) are planar structures with attached electronic circuitry that enable a partially programmable communication environment. RIS operation can be regarded as nearly passive since it acts by simply reflecting the impinging traveling waves towards desired directions, thus requiring energy only for the reconfiguration of its reflective elements (REs). This paper tackles the problem of wirelessly powering RIS circuitry via control signaling. Simultaneous wireless information and power transfer (SWIPT) is considered by taking into account two basic principles:…
Intelligent reflecting surface (IRS) offers a cost effective solution to link blockage problem in mmWave communications, and the prerequisite of which is the accurate estimation of (1) the optimal beams for base station/access point (BS/AP) and mobile terminal (MT), (2) the optimal reflection patterns for IRSs, and (3) link blockage. In this paper, we carry out beam training design for IRSs assisted mmWave communications to estimate the aforementioned parameters. To acquire the optimal beams and reflection patterns, we firstly perform random beamforming and maximum likelihood estimation to est…
The existing phase shifter models adopted for reconfigurable intelligent surfaces (RISs) have ignored the electromagnetic (EM) waves propagation behavior, thus cannot reveal practical effects of RIS on wireless communication systems. Based on the equivalent circuit, this paper introduces an angle-dependent phase shifter model for varactor-based RISs. To the best of our knowledge, this is the first phase shifter model which reveals that the incident angle of EM waves has influence on the reflection coefficient of RIS. In addition, the angle-reciprocity on RIS is investigated and further proved …
