In this paper, an efficient massive multiple-input multiple-output (MIMO) detector is proposed by employing a deep neural network (DNN). Specifically, we first unfold an existing iterative detection algorithm into the DNN structure, such that the detection task can be implemented by deep learning (DL) approach. We then introduce two auxiliary parameters at each layer to better cancel multiuser interference (MUI). The first parameter is to generate the residual error vector while the second one is to adjust the relationship among previous layers. We further design the training procedure to optimize the auxiliary parameters with pre-processed inputs. The so derived MIMO detector falls into the category of model-driven DL. The simulation results show that the proposed MIMO detector can achieve preferable detection performance compared to the existing detectors for massive MIMO systems.
Massive multiple-input multiple-output (MIMO) is a key technology for emerging next-generation wireless systems. Utilizing large antenna arrays at base-stations, massive MIMO enables substantial spatial multiplexing gains by simultaneously serving a large number of users. However, the complexity in massive MIMO signal processing (e.g., data detection) increases rapidly with the number of users, making conventional hand-engineered algorithms less computationally efficient. Low-complexity massive MIMO detection algorithms, especially those inspired or aided by deep learning, have emerged as a pr…
Massive multiple-input multiple-output (MIMO) communication systems have drawn significant interest recently in next-generation wireless communications. The use of a large number of antennas in massive MIMO makes the estimation of channel state information very challenging. Accurate channel state information is essential in capitalizing the advantages of the massive MIMO technology. This paper proposes the application of the Ensemble Square Root Filter (EnSRF) and a variant of EnSRF, namely a Particle wise Update version of the Ensemble Square Root Filter (PUEnSRF) to estimate the time-selecti…
Hybrid Massive MIMO reduces implementation complexity but only supports beamforming coefficients that are common across all subbands. However, in macro cellular where the channel has limited degrees of freedom, the long-term component of the channel can be decomposed into a set of subband-independent beamforming basis functions referred to as eigenbeams. A Coherent Hybrid Massive MIMO system can form arbitrary linear combinations of the eigenbeams at every subband to mimic Digital Massive MIMO beamforming as observed across all locations in the cell.
Massive multiple-input multiple-output (MIMO) is now making its way to the standardization exercise of future 5G networks. Yet, there are still fundamental questions pertaining to the robustness of massive MIMO against physically detrimental propagation conditions. On these grounds, we identify scenarios under which massive MIMO can potentially fail in Ricean channels, and characterize them physically, as well as, mathematically. Our analysis extends and generalizes a stream of recent papers on this topic and articulates emphatically that such harmful scenarios in Ricean fading conditions are …
Massive multiple-input multiple-output (MIMO) is becoming a mature technology, and has been approved for standardization in the 5G ecosystem. Although there is a large body of papers on the theoretical analysis of massive MIMO, the majority of relevant work assumes the simplified, yet overly idealistic, Kronecker-type model for spatial correlation. Motivated by the deficiencies of the Kronecker model, we invoke a naturally generalized spatial correlation model, that is the Weichselberger model. For this model, we pursue a comprehensive analysis of massive MIMO performance in terms of channel h…
In this paper, we propose a novel joint caching and massive multiple-input multiple-output (MIMO) transmission scheme, referred to as cache-aided massive MIMO, for advanced downlink cellular communications. In addition to reaping the conventional advantages of caching and massive MIMO, the proposed scheme also exploits the side information provided by cached files for interference cancellation at the receivers. This interference cancellation increases the degrees of freedom available for precoding design. In addition, the power freed by the cache-enabled offloading can benefit the transmission…
The high spectral efficiency of massive MIMO (Multiple Input Multiple Output) is mainly achieved through the exploitation of spatial multiplexing, i.e. by using a high number of MIMO layers that are applied simultaneously to many users. The power consumption of a massive MIMO base station is determined by the hardware driving a high number of antenna ports and elements. This paper focuses on practical deployment situations with varying user load. During hours with low number of users a certain significant part of hardware power consumption would remain with conventional massive MIMO processing…
This letter focuses on integrating rate-splitting multiple-access (RSMA) with time-division-duplex Cell-free Massive MIMO (multiple-input multiple-output) for massive machine-type communications. Due to the large number of devices, their sporadic access behaviour and limited coherence interval, we assume a random access strategy with all active devices utilizing the same pilot for uplink channel estimation. This gives rise to a highly pilot-contaminated scenario, which inevitably deteriorates channel estimates. Motivated by the robustness of RSMA towards imperfect channel state information, we…
Low-resolution analog-to-digital converters (ADCs) have been considered as a practical and promising solution for reducing cost and power consumption in massive Multiple-Input-Multiple-Output (MIMO) systems. Unfortunately, low-resolution ADCs significantly distort the received signals, and thus make data detection much more challenging. In this paper, we develop a new deep neural network (DNN) framework for efficient and low-complexity data detection in low-resolution massive MIMO systems. Based on reformulated maximum likelihood detection problems, we propose two model-driven DNN-based detect…
In this paper we study on a massive MIMO relay system with linear precoding under the conditions of imperfect channel state information at the transmitter (CSIT) and per-user channel transmit correlation. In our system the source-relay channels are massive multiple-input multiple-output (MIMO) ones and the relay-destination channels are massive multiple-input single-output (MISO) ones. Large random matrix theory (RMT) is used to derive a deterministic equivalent of the signal-to-interference-plus-noise ratio (SINR) at each user in massive MIMO amplify-forward and decode-forward (M-MIMO-ADF) re…
This letter develops an optimum beamforming method for downlink transmissions in cell-free massive multiple-input multiple-output (MIMO) systems, which employ a massive number of distributed access points to provide concurrent services to multiple users. The optimum design is formulated as a max-min problem that maximizes the minimum signal-to-interference-plus-noise ratio of all users. It is shown analytically that the problem is quasi-concave, and the optimum solution is obtained with the second-order cone programming. The proposed method identifies the best achievable beamforming performanc…
We propose practical transceiver structures for double-sided massive multiple-input-multiple-output (MIMO) systems. Unlike standard massive MIMO, both transmit and receive sides are equipped with high-dimensional antenna arrays. We leverage the multi-layer filtering architecture and propose novel layered transceiver schemes with practical channel state information requirements to simplify the complexity of our double-sided massive MIMO system. We conduct a comprehensive simulation campaign to investigate the performance of the proposed transceivers under different channel propagation condition…
In this work, the behaviour of bit error rates for both conventional and massive MIMO systems with high order constellations, which are essential to achieve spectral efficiency for 5G standard communications, has been evaluated. We have used real-domain Schnorr Euchner enumeration with K-best algorithm to reduce computational complexity of detection. The results, presented in this letter, have outperformed existing detection algorithms in terms of complexity and BER, especially in low SNR regions, for both massive and conventional MIMO systems. We performed simulations for N $\times$ N MIMO sy…
Algorithms for Massive MIMO uplink detection and downlink precoding typically rely on a centralized approach, by which baseband data from all antenna modules are routed to a central node in order to be processed. In the case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, said routing becomes a bottleneck since interconnection throughput is limited. This paper presents a fully decentralized architecture and an algorithm for Massive MIMO uplink detection and downlink precoding based on the Stochastic Gradient Descent (SGD) method, which does not requir…
Cell-free (CF) massive multiple-input multiple-output (M-MIMO) technology plays a prominent role in the beyond fifth-generation (5G) networks. However, designing a high performance CF M-MIMO detector is a challenging task due to the presence of pilot contamination which appears when the number of pilot sequences is smaller than the number of users. This work proposes a CF M-MIMO detector referred to as CF expectation propagation (CF-EP) that incorporates the pilot contamination when calculating the posterior belief. The simulation results show that the proposed detector achieves significant im…
Leveraging the available millimeter wave spectrum will be important for 5G. In this work, we investigate the performance of digital beamforming with low resolution ADCs based on link level simulations including channel estimation, MIMO equalization and channel decoding. We consider the recently agreed 3GPP NR type 1 OFDM reference signals. The comparison shows sequential DCD outperforms MMSE-based MIMO equalization both in terms of detection performance and complexity. We also show that the DCD based algorithm is more robust to channel estimation errors. In contrast to the common believe we al…
We develop a two-stage deep learning pipeline architecture to estimate the uplink massive MIMO channel with one-bit ADCs. This deep learning pipeline is composed of two separate generative deep learning models. The first one is a supervised learning model and designed to compensate for the quantization loss. The second one is an unsupervised learning model and optimized for denoising. Our results show that the proposed deep learning-based channel estimator can significantly outperform other state-of-the-art channel estimators for one-bit quantized massive MIMO systems. In particular, our desig…
This paper presents a novel massive multiple-input multiple-output (MIMO) transmission in beam domain for optical wireless communications. The optical base station equipped with massive optical transmitters communicates with a number of user terminals (UTs) through a transmit lens. Focusing on LED transmitters, we analyze light refraction of the lens and establish a channel model for optical massive MIMO transmissions. For a large number of LEDs, channel vectors of different UTs become asymptotically orthogonal. We investigate the maximum ratio transmission and regularized zero-forcing precodi…
The uplink performance of massive multiple-input-multiple-output (MIMO) systems where the base stations (BS) employ low-resolution analog-to-digital converters (ADCs) is analyzed. A high performance MMSE receiver that takes both additive white Gaussian noise (AWGN) and quantization noise into consideration is designed, which works well for both cases of uniform resolution ADCs and non-uniform resolution ADCs. With the proposed MMSE receiver, we then employ the random matrix theory to derive the asymptotic equivalent of the uplink spectral efficiency (SE) of the system. Numerical results show t…
Terahertz (THz) communication and the application of massive multiple-input multiple-output (MIMO) technology have been proved significant for the sixth generation (6G) communication systems, and have gained global interests. In this paper, we employ the shooting and bouncing ray (SBR) method integrated with acceleration technology to model THz and massive MIMO channel. The results of ray tracing (RT) simulation in this paper, i.e., angle of departure (AoD), angle of arrival (AoA), and power delay profile (PDP) under the frequency band supported by the commercial RT software Wireless Insite (W…
Spatial wideband effects are known to affect channel estimation and localization performance in millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems. Based on perturbation analysis, we show that the spatial wideband effect is in fact more pronounced than previously thought and significantly degrades performance, even at moderate bandwidths, if it is not properly considered in the algorithm design. We propose a novel channel estimation method based on multidimensional ESPRIT per subcarrier, combined with unsupervised learning for pairing across subcarriers, which shows…
An alternate direction method of multipliers (ADMM)-based detectors can achieve good performance in both small and large-scale multiple-input multiple-output (MIMO) systems. However, due to the difficulty of choosing the optimal penalty parameters, their performance is limited. This paper presents a deep neural network (DNN)-based massive MIMO detection method which can overcome the above limitation. It exploits the unfolding technique and learns to estimate the penalty parameters. Additionally, a computationally cheaper detector is also proposed. The proposed methods can handle the higher-ord…
Massive MIMO Channel-aware Decision Fusion Aided by Reconfigurable Intelligent Surfaces
University of Naples Federico II（那不勒斯费德里科二世大学）；University of Cassino and Southern Lazio（卡西诺与南拉齐奥大学）；CNIT（意大利电信与信息技术研究中心）；CentraleSupélec（中央理工-高等电力学院）；CNRS（法国国家科学研究中心）；Université Paris-Saclay（巴黎萨克雷大学）；University of Luxembourg（卢森堡大学）
Massive multiple-input multiple-output (MIMO) is an important technology in fifth generation (5G) cellular networks and beyond. To help design the beamforming at the base station, 5G has introduced new support in the form of flexible feedback and configurable antenna array geometries. In this article, we present an overview of MIMO throughout the mobile standards, highlight the new beam-based feedback system in 5G NR, and describe how this feedback system enables massive MIMO through beam management. Finally, we conclude with challenges related to massive MIMO in 5G.
In this paper, stochastic channel models for massive MIMO (M-MIMO) and extreme large MIMO (XL- MIMO) system applications are described, evaluated and systematically compared. This work aims to cover new aspects of massive MIMO stochastic channel models in a comprehensive and systematic way. For that, we compare different models, presenting graphically and intuitively the behavior of each model. Each massive MIMO channel model emulates the environment using different methodologies and properties. Using metrics such as capacity, SINR, singular values decomposition (SVD), and condition number, on…
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed pro…
We demonstrate a high capacity IF-over-fiber mobile fronthaul solution for multi-user massive MIMO 5G RAN. Using this scheme, a record aggregated radio bandwidth of 25.6 GHz was transmitted on a single optical wavelength over 40 km without fiber chromatic dispersion compensation
Grant-free multiple-input multiple-output (MIMO) usually employs non-orthogonal pilots for joint user detection and channel estimation. However, existing methods are too complex for massive grant-free access in massive MIMO. This letter proposes pilot detection reference signal (PDRS) to greatly reduce the complexity. In PDRS scheme, no iteration is required. Direct weight estimation is also proposed to calculate combining weights without channel estimation. After combining, PDRS recovery errors are used to decide the pilot activity. The simulation results show that the proposed grant-free sch…
We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a holographic solution for the guided (or reference) mode, generating a fan beam towards a prescribed direction, thereby forming a multibeam antenna system. We demonstrate that a narrowband uplink massiv…
In this paper, we adapt to cell-free Massive MIMO (multiple-input multiple-output) the finite-blocklength framework introduced by Östman et al. (2020) for the characterization of the packet error probability achievable with Massive MIMO, in the ultra-reliable low-latency communications (URLLC) regime. The framework considered in this paper encompasses a cell-free architecture with imperfect channel-state information, and arbitrary linear signal processing performed at a central-processing unit connected to the access points via fronthaul links. By means of numerical simulations, we show that, …
A dynamic and flexible generalized spatial modulation (GSM) framework is proposed for massive MIMO systems. Our framework is leveraged on the utilization of machine learning methods for GSM in order to improve the error performance in presence of correlated channels and channel estimation errors. Both decision tree and multi-layer perceptrons approaches are adopted for the GSM transmitter. Simulation results indicate that in presence of real-life impairments machine learning based approaches provide a superior performance when compared to the classical Euclidean distance based approach. The ob…
We study support for unmanned aerial vehicle (UAV) communications through a cell-free massive MIMO architecture. Under the general assumption that the propagation channel between the mobile stations, either UAVs or ground users, and the access points follows a Ricean distribution, we derive closed form spectral efficiency lower bounds for uplink and downlink with linear minimum mean square error (LMMSE) channel estimation. We also propose power allocation and user scheduling strategies for such a system. Our numerical results reveal that a cell-free massive MIMO architecture may provide better…
Massive access is one of the main use cases of beyond 5G (B5G) wireless networks and massive MIMO is a key technology for supporting it. Prior works studied massive access in the co-located massive MIMO framework. In this paper, we investigate the activity detection in grant-free random access for massive machine type communications (mMTC) in cell-free massive MIMO network. Each active device transmits a pre-assigned non-orthogonal pilot sequence to the APs and the APs send the received signals to a central processing unit (CPU) for joint activity detection. We formulate the maximum likelihood…
Efficient massive/ultra-massive multiple-input multiple-output (MIMO) detection algorithms with satisfactory performance and low complexity are critical to meet the high throughput and ultra-low latency requirements in 5G and beyond communications, given the extremely large number of antennas. In this paper, we propose a low-complexity graph neural network (GNN) enhanced approximate message passing (AMP) algorithm, AMP-GNN, for massive/ultra-massive MIMO detection. The structure of the neural network is customized by unfolding the AMP algorithm and introducing the GNN module for multiuser inte…
DOA estimation for massive multiple-input multiple-output (MIMO) system can provide ultra-high-resolution angle estimation. However, due to the high computational complexity and cost of all digital MIMO systems, a hybrid analog digital (HAD) structure MIMO was proposed. In this paper, a fast ambiguous phase elimination method is proposed to solve the problem of direction-finding ambiguity caused by the HAD MIMO. Only two-data-blocks are used to realize DOA estimation. Simulation results show that the proposed method can greatly reduce the estimation delay with a slight performance loss.
Grant-free random access (RA) with massive MIMO is a promising RA technique for massive access with low signaling overhead. In the grant-free RA with massive MIMO, preamble length has a critical impact on the performance of the system. In this paper, the optimal preamble length is investigated to maximize spectral efficiency (SE) of the grant-free RA with massive MIMO, where effects of the preamble length on the preamble collision and preamble overhead as well as channel estimation accuracy are taken into account. Simulation results agree well with our analyses and confirm the existence of opt…
Full Duplex (FD) communication can revolutionize wireless communications as it avoids using independent channels for bi-directional communications. This work generalizes the point-to-point FD communication in millimeter wave (mmWave) band consisting of K-pairs of massive MIMO FD nodes operating simultaneously. We present a novel joint hybrid beamforming (HYBF) and combining scheme for weighted sum-rate (WSR) maximization to enable the coexistence of massive MIMO FD links cost-efficiently. The proposed algorithm relies on alternative optimization based on the minorization-maximization method. M…
Efficient channel state information at transmitter (CSIT) for frequency division duplex (FDD) massive MIMO can facilitate its backward compatibility with existing FDD cellular networks. To date, several CSIT estimation schemes have been proposed for FDD single-cell massive MIMO systems, but they fail to consider inter-cell-interference (ICI) and suffer from downlink pilot contamination in multi-cell scenario. To solve this problem, this paper proposes a compressive sensing (CS)-based CSIT estimation scheme to combat ICI in FDD multi-cell massive MIMO systems. Specifically, angle-domain massive…
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for massive MIMO systems. We first examine the massive MIMO detection problem with perfect channel state information at the receiver (CSIR) and show that a conventional VB method with known noise variance yi…
We propose sparsity-adaptive beamspace channel estimation algorithms that improve accuracy for 1-bit data converters in all-digital millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) basestations. Our algorithms include a tuning stage based on Stein's unbiased risk estimate (SURE) that automatically selects optimal denoising parameters depending on the instantaneous channel conditions. Simulation results with line-of-sight (LoS) and non-LoS mmWave massive MIMO channel models show that our algorithms improve channel estimation accuracy with 1-bit measurements in a computatio…
Future wireless networks need to support massive machine type communication (mMTC) where a massive number of devices accesses the network and massive MIMO is a promising enabling technology. Massive access schemes have been studied for co-located massive MIMO arrays. In this paper, we investigate the activity detection in grant-free random access for mMTC in cell-free massive MIMO networks using distributed arrays. Each active device transmits a non-orthogonal pilot sequence to the access points (APs) and the APs send the received signals to a central processing unit (CPU) for joint activity d…
Massive MIMO, a key technology for increasing area spectral efficiency in cellular systems, was developed assuming moderately sized apertures. In this paper, we argue that massive MIMO systems behave differently in large-scale regimes due to spatial non-stationarity. In the large-scale regime, with arrays of around fifty wavelengths, the terminals see the whole array but non-stationarities occur because different regions of the array see different propagation paths. At even larger dimensions, which we call the extra-large scale regime, terminals see a portion of the array and inside the first …
In overloaded Massive MIMO systems, wherein the number K of user equipments (UEs) exceeds the number of base station antennas M, it has recently been shown that non-orthogonal multiple access (NOMA) can increase performance. This paper aims at identifying cases of the classical operating regime K < M, where code-domain NOMA can also improve the spectral efficiency of Massive MIMO. Particular attention is given to use cases in which poor favorable propagation conditions are experienced. Numerical results show that Massive MIMO with planar antenna arrays can benefit from NOMA in practical scenar…
Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resol…
Massive multi-user multiple-input multiple-output (MU-MIMO) enables significant gains in spectral efficiency and link reliability compared to conventional small-scale MIMO technology. Furthermore, linear precoders, e.g., using zero forcing or Wiener filter (WF) precoding, are sufficient to achieve excellent error-rate performance in the massive MU-MIMO downlink. However, these methods necessitate centralized processing at the base-station (BS), which causes (i) excessively high interconnect and chip input/output data rates, and (ii) high implementation complexity. We propose two feedforward ar…
To compensate the loss from outdated channel state information in wideband massive multiple-input multipleoutput (MIMO) systems, channel prediction can be performed by leveraging the temporal correlation of wireless channels. Machine learning (ML)-based channel predictors for massive MIMO systems were designed recently; however, the time overhead to collect a large amount of training data directly affects the latency of the system. In this paper, we propose a novel ML-based channel prediction technique, which can reduce the time overhead to collect the training data by transforming the domain …
Antenna selection is capable of handling the cost and complexity issues in massive multiple-input multiple-output (MIMO) channels. The sum-rate capacity of a multiuser massive MIMO uplink channel is characterized under the Nakagami fading. A mathematically tractable sum-rate capacity upper bound is derived for the considered system. Moreover, for a sufficiently large base station (BS) antenna number, a deterministic equivalent (DE) of the sum-rate bound is derived. Based on this DE, the sum-rate capacity is shown to grow double logarithmically with the number of BS antennas. The validity of th…
Since the first cellular networks were trialled in the 1970s, we have witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic growth has been managed by a combination of wider bandwidths, refined radio interfaces, and network densification, namely increasing the number of antennas per site. Due its cost-efficiency, the latter has contributed the most. Massive MIMO (multiple-input multiple-output) is a key 5G technology that uses massive antenna arrays to provide a very high beamforming gain and spatially multiplexing of users, and hence, increases the spectral and energ…
A new wave of wireless services, including virtual reality, autonomous driving and internet of things, is driving the design of new generations of wireless systems to deliver ultra-high data rates, massive number of connected devices and ultra low latency. Massive multiple-input multiple-output (MIMO) is one of the critical underlying technologies that allow future wireless networks to meet these service needs. This article discusses the application of deep learning (DL) for massive MIMO channel estimation in wireless networks by integrating the underlying characteristics of channels in future…
Massive multiple-input multiple-out (MIMO) technology is vital in millimeter-wave (mmWave) bands to obtain large array gains. However, there are practical challenges, such as high hardware cost and power consumption in such systems. A promising solution to these problems is to adopt a hybrid beamforming architecture. This architecture has a much lower number of transceiver (TRx) chains than the total antenna number, resulting in cost- and energy-efficient systems. In this paper, we present a real-time mmWave (28 GHz) massive MIMO testbed with hybrid beamforming. This testbed has a 64-antenna/1…
Massive multiple-input multiple-output (MIMO) systems are a main enabler of the excessive throughput requirements in 5G and future generation wireless networks as they can serve many users simultaneously with high spectral and energy efficiency. To achieve this, massive MIMO systems require accurate and timely channel state information (CSI), which is acquired by a training process that involves pilot transmission, CSI estimation and feedback. This training process incurs a training overhead, which scales with the number of antennas, users and subcarriers. Reducing this training overhead in ma…
Extra-large massive multiple-input multiple-output (XL-MIMO) systems is a new concept, where spatial non-stationarities allow activate a high number of user equipments (UEs). This paper focuses on a grant-based random access (RA) approach in the novel XL-MIMO channel scenarios. Modifications in the classical Strongest User Collision Resolution (SUCRe) protocol have been aggregated to explore the visibility regions (VRs) overlapping in XL-MIMO. The proposed grant-based RA protocol takes advantage of this new degree of freedom for improving the number of access attempts and accepted UEs. As a re…
Cell-free massive multiple-input multiple-output (MIMO) employs a large number of distributed access points (APs) to serve a small number of user equipments (UEs) via the same time/frequency resource. Due to the strong macro diversity gain, cell-free massive MIMO can considerably improve the achievable sum-rate compared to conventional cellular massive MIMO. However, the performance of cell-free massive MIMO is upper limited by inter-user interference (IUI) when employing simple maximum ratio combining (MRC) at receivers. To harness IUI, the expanded compute-and-forward (ECF) framework is adop…
This letter presents and analyzes orthogonal frequency-division multiplexing (OFDM)-based multi-carrier transmission for cell-free massive multi-input multi-output (CFmMIMO) over frequency-selective fading channels. Frequency-domain conjugate beamforming, pilot assignment, and user-specific resource allocation are proposed. CFmMIMO-OFDM is scalable to serve a massive number of users and is flexible to offer diverse data rates for heterogeneous applications.
