We calculated a spin-polarized conductance in the almost unexplored nanostructure "high temperature ferromagnetic insulator/ graphene/ ferroelectric film" with a special attention to the impact of electric polarization rotation in a strained multiaxial ferroelectric film. The rotation and value of polarization vector are controlled by a misfit strain. We proposed a phenomenological model, which takes into account the shift of the Dirac point due to the proximity of ferromagnetic insulator and uses the Landauer formula for the conductivity of the graphene channel. We derived analytical expressions, which show that the strain-dependent ferroelectric polarization governs the concentration of two-dimensional charge carriers and Fermi level in graphene in a self-consistent way. We demonstrate the realistic opportunity to control the spin-polarized conductance of graphene by a misfit strain ("strain engineering") at room and higher temperatures in the nanostructures CoFeO4/graphene/PZT and Y3Fe5O12/graphene/PZT. Obtained results open the possibilities for the applications of ferromagnetic/graphene/ferroelectric nanostructures as non-volatile spin filters and spin valves.
The aim of this Chapter is to provide an account of recent advances in the first-principles modeling of ferroelectric oxide nanostructures. Starting from a microscopic description of ferroelectricity in bulk materials and considering then, successively, different kinds of nanostructures (films, multilayers, wires, and particles), we try to identify the main trends and to provide a coherent picture of the role of finite size effects in ferroelectric oxides.
2D layered ferroelectric materials such as CuInP$_2$S6 (CIPS) are promising candidates for novel and high-performance photocatalysts, owning to their ultrathin layer thickness, strong interlayer coupling, and intrinsic spontaneous polarization, while how to control the photocatalytic activity in layered CIPS remains unexplored. In this work, we report for the first time the photocatalytic activity of ferroelectric CIPS for the chemical deposition of silver nanostructures (AgNSs). The results show that the shape and spatial distribution of AgNSs on CIPS are tunable by controlling layer thicknes…
An {\it atomistic} approach allowing an accurate and efficient treatment of depolarizing energy and field in {\it any} low-dimensional ferroelectric structure is developed. Application of this approach demonstrates the limits of the widely used continuum model (even) for simple test cases. Moreover, implementation of this approach within a first-principles-based model reveals an unusual phase transition -- from a state exhibiting a spontaneous polarization to a phase associated with a toroid moment of polarization -- in a ferroelectric nanodot for a critical value of the depolarizing field.
The field-induced polarization reversal in $c$-oriented ferroelectric phase of strained perovskite film has been studied. We show that in additional to the conventional longitudinal switching mechanism, when c-oriented polarization vector changes its modulus, the longitudinal-transversal and transversal mechanisms when the perpendicular component of polarization is dynamically admixed are possible. The later process can occurs either via the straight-abrupt or initially-continues polarization turnover scenario. We specified the obtained results for the case of PbTiO$_{3}$ and BaTiO$_{3}$ ferro…
Anharmonicity of the inter-atomic potential is taken into account for the quantitative simulation of the conduction and valence band offsets for highly-strained semiconductor heterostructures. The anharmonicity leads to a weaker compressive hydrostatic strain than that obtained with the commonly used quasi-harmonic approximation of the Keating model. Inclusion of the anharmonicity in the simulation of strained InAs/GaAs nanostructures results in an improvement of the electron band offset computed on an atomistic level by up to 100 meV compared to experiment.
The boundary conditions, customarily used in the Landau-type approach to ferroelectric thin films and nanostructures, have to be modified to take into account that a surface of a ferroelectric (FE) is a defect of a ``field'' type. The surface (interface) field is coupled to a normal component of polarization and, as a result, the second order phase transitions are generally suppressed and anomalies in response are washed out, as observed experimentally.
Ferroelectric nanostructures can be formed by local switching of domains using techniques such as piezo-force microscopy (PFM). Understanding lateral size effects is important to determine the minimum feature size for writing ferroelectric nanostructures. To understand these lateral size effects, we use the time-dependent-Ginzburg-Landau equations to simulate localized switching of domains for a PFM type and parallel-plate capacitor configurations. Our investigations indicate that fringing electric fields lead to switching via 90 deg domain wedge nucleation for thicker films while at smaller t…
This work explores a nontrivial temperature behavior of the carriers concentration, which governs graphene channel conductance in the nano-structure "graphene channel on ferroelectric substrate" that is a basic element for FETs in non-volatile memory units of new generation. We revealed the transition from a single to double antiferroelectric-like hysteresis loop of the concentration voltage dependence that happens with the temperature increase and then exist in a wide temperature range (from 350 to 500 K). Unexpectedly we revealed the double loops of polarization and concentration can have ir…
We investigate coherent phonon propagation in a thin film of ferroelectric PbZr0.2Ti0.8O3 (PZT) by ultrafast x-ray diffraction (UXRD) experiments, which are analyzed as time-resolved reciprocal space mapping (RSM) in order to observe the in- and out-of-plane structural dynamics simultaneously. The mosaic structure of the PZT leads to a coupling of the excited out-of-plane expansion to in-plane lattice dynamics on a picosecond timescale, which is not observed for out-of-plane compression.
The emergent behaviors in thin films of a multiaxial ferroelectric due to an electrochemical coupling between the rotating polarization and surface ions are explored within the framework of the 2-4 Landau-Ginzburg-Devonshire (LGD) thermodynamic potential combined with the Stephenson-Highland (SH) approach. The combined LGD-SH approach allows to describe the electrochemical switching and rotation of polarization vector in the multiaxial ferroelectric film covered by surface ions with a charge density dependent to the relative partial oxygen pressure. We calculate the phase diagrams and analyze …
The boundary conditions, customarily used in the Landau-type approach to ferroelectric thin films and nanostructures, have to be modified to take into account that a surface of a ferroelectric (FE) is a defect of the ``field'' type. The surface (interface) field is coupled to a normal component of polarization and, as a result, the second order phase transitions are generally suppressed and anomalies in response are washed out. In FE films with a compositional (grading) or some other type of inhomogeneity, the transition into a monodomain state is suppressed, but a transition with formation of…
Ferroelectric random access memory cells (FeRAMs) have reached 450 x 400 nm production (0.18 micron^2) at Samsung with lead zirconate-titanate (PZT), 0.13 micron^2 at Matsushita with strontium bismuth tantalate (SBT), and comparable sizes at Fujitsu with BiFeO3. However, in order to increase storage density, the industry roadmap requires by 2010 that such planar devices be replaced with three-dimensional structures. Unfortunately, little is known yet about even such basic questions as the domain scaling of 3-d nanodevices, as opposed to 2-d thin films. Here we report the experimental measureme…
Freestanding BaTiO3 nanodots exhibit domain structures characterized by distinct quadrants of ferroelastic 90° domains in transmission electron microscopy (TEM) observations. These differ significantly from flux-closure domain patterns in the same systems imaged by piezoresponse force microscopy. Based upon a series of phase field simulations of BaTiO3 nanodots, we suggest that the TEM patterns result from a radial electric field arising from electron beam charging of the nanodot. For sufficiently large charging, this converts flux-closure domain patterns to quadrant patterns with radial net p…
We performed first principles calculations for epitaxially strained orthorhombic CaTiO$_3$. The computational results reveal the existence of a metastable ferroelectric phase at compressive strain with unexpected in-plane polarization. Symmetry analysis indicates that two distortion modes at the X point combine to induce the polarization, leading to characterization as a hybrid improper ferroelectric. Our work demonstrates a mechanism for improper ferroelectricity in simple perovskites without the need for symmetry lowering by layering or cation ordering.
Effective conduction-band model for zincblende III-V semiconductors in the presence of strain: tuning the properties of bulk crystals and nanostructures
X-ray analysis of ferroelectric thin layers of Ba1/2Sr1/2TiO3 with different thickness reveals the presence of internal strain gradients across the film thickness and allows us to propose a functional form for the internal strain profile. We use this to calculate the direct influence of strain gradient, through flexoelectric coupling, on the degradation of the ferroelectric properties of thin films with decreasing thickness, in excellent agreement with the observed behaviour. This work highlights the link between strain relaxation and strain gradients in epitaxial films, and shows the pressing…
This paper contains results of investigations of inhomogeneous states caused by the coexistence of ferroelectric and antiferroelectric phases in lead-zirconate-titanate based solid solutions. The domains of ferroelectric and antiferroelectric phases with sizes of the order of 20 to 30 nm coexist in the bulk of the samples due to a small difference in the free energies of the phases. The coherent character of interphase boundaries leads to the concentration of elastic stresses along these boundaries. Elastic stresses cause the local decomposition of the solid solution due to the circumstance th…
2D Ferroelectric materials are promising for designing low-dimensional memory devices. Here, we explore strain tunable ferroelectric properties of group-IV monochalcogenides MX (M=Ge, Sn; X=S, Se) and their potential application in lateral field tunnel junction devices. We find that these monolayers have in-plane ferroelectricity, with their ferroelectric parameters being on par with other known 2D ferroelectric materials. Amongst SnSe, SnS, GeSe, and GeS, we find that GeS has the best ferroelectric parameters for device applications, which can be improved further by applying uniaxial tensile …
Ferroelectric hafnia is being explored for next generation electronics due to its robust ferroelectricity in nanoscale samples and its compatibility with silicon. However, its ferroelectricity is not understood. Other ferroelectrics usually lose their ferroelectricity for nanoscopic samples and thin films, and the hafnia ground state is non-polar baddeleyite. Here we study hafnia with density functional theory (DFT) under epitaxial strain, and find that strain not only stabilizes the ferroelectric phases, but also leads to unstable modes and a downhill path in energy from the high temperature …
The Influence of Chemical Strains on the Electrocaloric Response, Polarization Morphology, Tetragonality and Negative Capacitance Effect of Ferroelectric Core-Shell Nanorods and Nanowires
We review the role that first-principles calculations have played in understanding the effects of substrate-imposed misfit strain on epitaxially grown perovskite ferroelectric films. We do so by analyzing the case of BaTiO$_3$, complementing our previous publications on this subject with unpublished data to help explain in detail how these calculations are done. We also review similar studies in the literature for other perovskite ferroelectric-film materials.
The structure and polarization of the as-yet hypothetical Ruddlesden-Popper compound Pb$_2$TiO$_4$ are investigated within density-functional theory. Zone enter phonons of the high-symmetry K$_2$NiF$_4$-type reference structure, space group $I4/mmm$, were calculated. At the theoretical ground-state lattice constants, there is one unstable infrared-active phonon. This phonon freezes in to give the $I2mm$ ferroelectric state. As a function of epitaxial strain, two additional ferroelectric phases are found, with space groups $I4mm$ and $F2mm$ at compressive and tensile strains, respectively.
Advances in complex oxide heteroepitaxy have highlighted the enormous potential of utilizing strain engineering via lattice mismatch to control ferroelectricity in thin-film heterostructures. This approach, however, lacks the ability to produce large and continuously variable strain states, thus limiting the potential for designing and tuning the desired properties of ferroelectric films. Here, we observe and explore dynamic strain-induced ferroelectricity in SrTiO$_3$ by laminating freestanding oxide films onto a stretchable polymer substrate. Using a combination of scanning probe microscopy,…
We report on the dielectric properties of epitaxial [001] and [100]-textured thin films of antiferromagnetic orthorhombic YMnO3 and their variation under compressive epitaxial strain. It is found that weakly strained YMnO3 films are ferroelectric with a polarization along c-axis switchable by 90 degrees by an external magnetic field. When reducing film thickness and increasing epitaxial strain, the ferroelectric order is progressively suppressed. Analysis of structural, dielectric and magnetic data indicates that suppression of ferroelectricity when reducing thickness is accompanied by an enla…
We report a Raman scattering investigation of columnar BiFeO3-CoFe2O4 (BFO-CFO) epitaxial thin film nanostructures, where BFO pillars are embedded in a CFO matrix. The feasibility of a strain analysis is illustrated through an investigation of two nanostructures with different BFO-CFO ratios. We show that the CFO matrix presents the same strain state in both nanostructures, while the strain state of the BFO pillars depends on the BFO/CFO ratio with an increasing tensile strain along the out-of-plane direction with decreasing BFO content. Our results demonstrate that Raman scattering allows mon…
We investigate the impact of uniaxial strain on atomic shifts, dipolar interactions, polarization and electric permittivity in TiO$_2$ (rutile) by using two different implementations of density functional theory. It is shown that calculations using the Vienna ab inito simulation package (VASP) and the plane-wave self-consistent field method (PWscf) yield qualitatively the same atomic relaxations and ferroelectric trends under strain. The phonon dispersion curves of unstrained and strained TiO$_2$ (rutile) obtained by employing the linear response method confirm previous calculations of the gia…
We present a thermodynamic analysis of the recently discovered nitride ferroelectric materials using the classic Landau-Devonshire approach. The electrostrictive and dielectric stiffness coefficients of Al1-xScxN with wurtzite structure (6mm) are determined using a free energy density function assuming a hexagonal parent phase (6/mmm), with the first order phase transition based on the dielectric stiffness relationships. The results of this analysis show that the strain sensitivity of the energy barrier is one order of magnitude larger than that of the spontaneous polarization in these novel w…
We describe the directional growth of ferroelectric domains in a multiferroic BiFeO3 thin film, which was grown epitaxially on a vicinal (001) SrTiO3 substrate. A detailed structural analysis of the film shows that a strain gradient, which can create a symmetry breaking in a ferroelectric double well potential, causes ferroelectric domains to grow with preferred directionality under the influence of an electric field. Our results suggest the possibility of controlling the direction of domain growth with an electric field by imposing constraints on ferroelectric films, such as a strain gradient…
Epitaxial strain can be used to modify the properties of ferroelectric thin films. From the experimental viewpoint, the challenge is to fine-tune the magnitude of the strain. We illustrate how, by using a suitable combination of composition and substrate, the magnitude of the epitaxial strain can be controlled in a continuous manner. The phase diagram of PbxSr1-xTiO3 films grown epitaxially on (110)-DyScO3 is calculated using a Devonshire-Landau approach. A boundary between in-plane and out-of-plane oriented ferroelectric phases is predicted to take place at $x \approx$ 0.8. A series of PbxSr1…
Using a Ginzburg--Landau--Devonshire model that includes the coupling of polarization to strain, we calculate the fluctuation spectra of ferroelectric domain walls. The influence of the strain coupling differs between 180 degree and 90 degree walls due to the different strain profiles of the two configurations. The finite speed of acoustic phonons, $v_s$, retards the response of the strain to polarization fluctuations, and the results depend on $v_s$. For $v_s \to \infty$, the strain mediates an instantaneous electrostrictive interaction, which is long-range in the 90 degree wall case. For fin…
Short period ferroelectric/ferroelectric BaTiO3 (BTO)/PbTiO3 (PTO) superlattices are studied using density functional theory. Contrary to the trends in paraelectric/ferroelectric superlattices the polarization remains nearly constant for PTO concentrations below 50%. In addition, a significant decrease in the c/a ratio below the PTO values were observed. Using a superlattice effective Hamiltonian we predict an enhancement in the d33 piezoelectric coefficient peaking at ~75% PTO concentration due to the different polarization-strain coupling in PTO and BTO layers. Further analysis reveals that …
Much new solid state technology for single-photon sources, detectors, photovoltaics and quantum computation relies on the fabrication of strained semiconductor nanostructures. Successful development of these devices depends strongly on techniques allowing structural analysis on the nanometer scale. However, commonly used microscopy methods are destructive, leading to the loss of the important link between the obtained structural information and the electronic and optical properties of the device. Alternative non-invasive techniques such as optically detected nuclear magnetic resonance (ODNMR) …
We investigate the strain dependence of the ferroelectric polarization and the structure of the ferroelectric domain walls in the layered perovskite-related barium fluorides, BaMF$_4$ (M=Mg, Zn). The unusual "geometric ferroelectricity" in these materials is driven by the softening of a single polar phonon mode consisting of rotations of the MF$_6$ octahedra accompanied by polar displacements of the Ba cations, and in contrast to conventional ferroelectrics involves minimal electronic rehybridization. We therefore anticipate a different strain dependence of the polarization, and alternative do…
Integration of ferroelectric materials into novel technological applications requires low coercive field materials, and consequently, design strategies to reduce the ferroelectric switching barriers. In this first principles study, we show that biaxial strain, which has a strong effect on the ferroelectric ground states, can also be used to tune the switching barrier of hybrid improper ferroelectric Ruddlesden-Popper oxides. We identify the region of the strain -- tolerance factor phase diagram where this intrinsic barrier is suppressed, and show that it can be explained in relation to strain …
We report on growth and ferroelectric (FE) properties of superlattices (SLs) composed of the FE BaTiO3 and the paraelectric (PE) CaTiO3. Previous theories have predicted that the polarization in (BaTiO3)n/(CaTiO3)n SLs increases as the sublayer thickness (n) increases when the same strain state is maintained. However, our BaTiO3/CaTiO3 SLs show a varying lattice-strain state and systematic reduction in polarization with increasing n while coherently-strained SLs with n=1, 2 show a FE polarization of ca. 8.5 uC/cm^2. We suggest that the strain coupling plays more important role in FE properties…
We investigate the variation of the spontaneous ferroelectric polarization with epitaxial strain for BaTiO$_3$, PbTiO$_3$, LiNbO$_3$, and BiFeO$_3$ using first principles calculations. We find that while the strain dependence of the polarization is very strong in the simple perovskite systems BaTiO$_3$ and PbTiO$_3$ it is only weak in LiNbO$_3$ and BiFeO$_3$. We show that this different behavior can be understood purely in terms of the piezoelectric and elastic constants of the unstrained bulk material, and we discuss several factors that determine the strain behavior of a certain material.
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 deg C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The…
We use first principles density functional theory to investigate the softening of polar phonon modes in rutile TiO$_2$ under tensile (110)-oriented strain. We show that the system becomes unstable against a ferroelectric distortion with polarization along (110) for experimentally accessible strain values. The resulting polarization, estimated from the Born effective charges, even exceeds the bulk polarization of BaTiO$_3$. Our calculations demonstrate the different strain dependence of polar modes polarized along (110) and (001) directions, and we discuss the possibility of strain engineering …
We demonstrate that the conventional application of linear models to the analysis of optoelectromechanical properties of nanostructures in bandstructure engineering could be inadequate. The focus of the present paper is on a model based on the coupled Schrodinger-Poisson system where we account consistently for the piezoelectric effect and analyze the influence of different nonlinear terms in strain components. The examples given in this paper show that the piezoelectric effect contributions are essential and have to be accounted for with fully coupled models. While in structural applications …
Using density-functional calculations we study the structure and polarization response of tetragonal PbTiO3, BaTiO3 and SrTiO3 in a strain regime that is previously overlooked. Different from common expectations, we find that the polarizations in all three substances saturate at large strains, demonstrating a universal phenomenon. The saturation is shown to originate from an unusual and strong electron-ion correlation that leads to cancellation between electronic and ionic polarizations. Our results shed new insight on the polarization properties, and reveal the existence of a fundamental limi…
First-principles calculations of the epitaxial-strain phase diagram of perovskite SrCoO$_{3}$ are presented. Through combination of the large spin-phonon coupling with polarization-strain coupling and coupling of the band gap to the polar distortion, both tensile and compressive epitaxial strain are seen to drive the bulk ferromagnetic-metallic (FM-M) phase to antiferromagnetic-insulating-ferroelectric (AFM-I-FE) phases, the latter having unusually low elastic energy. At these coupled magnetic-ferroelectric metal-insulator phase boundaries, cross responses to applied electric and magnetic fiel…
One of the exciting features of two-dimensional (2D) materials is their electronic and optical tunability through strain engineering. Previously, we found a class of 2D ferroelectric Rashba semiconductors PbX (X = S, Se, Te) with tunable spin-orbital properties. In this work, based on our previous tight-binding (TB) results, we derive an effective low-energy Hamiltonian around the symmetry points that captures the effects of strain on the electronic properties of PbX. We find that strains induce gauge fields which shift the Rashba point and modify the Rashba parameter. This effect is equivalen…
The alkaline earth binary oxides adopt a simple rocksalt structure and form an important family of compounds because of their large presence in the earth's mantle and their potential use in microelectronic devices. In comparison to the class of multifunctional ferroelectric perovskite oxides, however, their practical applications remain limited and the emergence of ferroelectricity and related functional properties in simple binary oxides seems so unlikely that it was never previously considered. Here, we show using first-principles density functional calculations that ferroelectricity can be …
Materials that can produce large controllable strains are widely used in shape memory devices, actuators and sensors. Great efforts have been made to improve the strain outputs of various material systems. Among them, ferroelastic transitions underpin giant reversible strains in electrically-driven ferro/piezoelectrics and thermally- or magneticallydriven shape memory alloys. However, large-strain ferroelastic switching in conventional ferroelectrics is very challenging while magnetic and thermal controls are not desirable for applications. Here, we demonstrate an unprecedentedly large shear s…
A combined experimental and computational investigation of coupling between polarization and epitaxial strain in highly polar ferroelectric PbZr_0.2Ti_0.8O_3 (PZT) thin films is reported. A comparison of the properties of relaxed (tetragonality c/a = 1.05) and highly-strained (c/a = 1.09) epitaxial films shows that polarization, while being amongst the highest reported for PZT or PbTiO_3 in either film or bulk forms (P_r = 82 microC/cm^2), is almost independent of the epitaxial strain. We attribute this behavior to a suppressed sensitivity of the A-site cations to epitaxial strain in these Pb-…
We report from first-principles-based atomistic simulations that ferroelectricity can be sustained in PbTiO3 nanoparticles of only a few lattice constants in size as a result of a toroidal ordering. We found that size-induced topological transformations lead to the stabilization of a ferroelectric bubble by the alignment of vortex cores along a closed path. These transformations, which are driven by the aspect ratio of the nanostructure, change the topology of the polarization field, producing a rich variety of polar configurations. For sufficiently flat nanostructures, a multi-bubble state br…
We report on theoretical and experimental investigation of A-site driven ferroelectricity in ferromagnetic La2NiMnO6 thin films grown on SrTiO3 substrates. Structural analysis and density functional theory calculations show that epitaxial strain stretches the rhombohedral La2NiMnO6 crystal lattice along the [111]cubic direction, triggering a displacement of the A-site La ions in the double perovskite lattice. The lattice distortion and the A-site displacements stabilize a ferroelectric polar state in ferromagnetic La2NiMnO6 crystals. The ferroelectric state only appears in the rhombohedral La2…
Zirconia and hafnia based thin films have attracted tremendous attention in the last decade due to their unexpected ferroelectric behavior at the nanoscale, which facilitates the downscaling of ferroelectric devices. The present work reports a novel ferroelectric rhombohedral phase of ZrO2 that can be achieved in thin films grown on (111)- Nb:SrTiO3 substrates by ion-beam sputtering. Structural and ferroelectric characterizations reveal that the (111)-oriented ZrO2 films are under epitaxial compressive strain and display a switchable ferroelectric polarization of about 20.2 μC/cm2 with a coerc…
