Flexible all-PM NALM Yb:fiber laser design for frequency comb applications: operation regimes and their noise properties
Aline S. Mayer, Wilfrid Grosinger, Jakob Fellinger, Georg Winkler, Lukas W. Perner, Stefan Droste, Sarper H. Salman, Chen Li, Christoph M. Heyl, Ingmar Hartl, Oliver H. Heckl
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps$^2$) to normal (+0.015 ps$^2$). We put a particular focus on the characterization of the intensity noise as well as the free-running linewidth of the carrier-envelope-offset (CEO) frequency as a function of the different operation regimes. We observe that operation points far from the spontaneous emission peak of Yb (~1030 nm) and close to zero intracavity dispersion can be found, where the influence of pump noise is strongly suppressed. For such an operation point, we show that a CEO linewidth of less than 10-kHz at 1 s integration can be obtained without any active stabilization.
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design parameters were determined by numerically simulating the pulse evolution in the oscillator and by analyzing their impact on the laser performance. Experimentally, we achieved an 88 fs compressed pulse durati…
Moving the fiber laser emission to the region below one micron may provide a cheaper, more compact and robust alternatives to the existing solid state lasers. Here, for the first time we report a neodymium mode-locked fiber laser emitting at 905 nm in the all-fiber polarization maintaining configuration. We obtain a self-starting pulse generation in nonlinear amplifying loop mirror (NALM) cavity configuration. To suppress a dominant emission at 1064 nm corresponding to a 4-level laser scheme, we use an active fiber - 920/1064 division multiplexer - active fiber sandwich-like sequence in the NA…
From the point of view of the differential phase delay experienced by the two counterpropagating optical fields, the self-starting of the mode-locked fiber laser with a nonlinear amplifying loop mirror (NALM) is theoretically studied. Although it is generally believed that NALM shows a saturable absorption effect on both continuous wave (CW) light and pulses, we find a counter-intuitive fact that cross-phase modulation (XPM) leads to opposite signs of differential nonlinear phase shifts (NPSs) in these two cases, resulting in inverse saturable absorption (ISA) during pulse formation process. T…
We present a 2-\mum frequency comb based on a reliable mode-locked Er:fiber laser with 100 MHz repetition rate. After shifting the spectrum of the amplified Er:fiber comb to longer wavelengths, a single-clad Tm/Ho:fiber is used as a self-pumped pre-amplifier to generate a coherent and broadband spectrum centered at 1.93 \mum. Subsequently, a cladding-pumped Tm:fiber amplifier boosts the system to a maximum output power of 4.8 W at 1.96 \mum. After compression in a compact grating compressor, our amplified Er:fiber/Tm:fiber hybrid system delivers as much as 2.9 W with a pulse duration of 141 fs…
We propose a robust spectral beam combining scheme using wavelength dependent polarisation rotators and polarization beam combiners. We successfully demonstrated the concept for two Yb-doped fiber lasers at 1064nm and 1092nm up to a total input power of 90W. The results reveal a very good combining efficiency and the potential for scaling to high power operations in this method of beam combining.
We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%.
We study a re-configurable nonreciprocal fiber ring cavity setup to generate tunable optical frequency combs. Coherent combs can be obtained by finely exploiting bi-chromatic Brillouin lasing and cascaded four-wave mixing in the nonlinear fiber cavity. We introduce a numerical model of the cavity system, which is validated by comparisons with experiments. Our work shows the importance of the mode pulling effect, controlled by the pump laser detuning, in setting the dynamics of the comb. This effect along with the impact of multimode lasing had been overlooked in previous fiber experiments. We …
In this paper, we demonstrate the polarization-multiplexed system capable of generating two stable optical frequency combs with tunable frequency differences and a large extinction ratio. Also, the polarization dynamics of a dual-frequency comb generated from a single mode-locked Er-doped fiber laser are experimentally studied. The obtained results will extend the application to areas such as polarization spectroscopy and dual-comb-based polarimetry.
Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration.
We report the generation of a purely vibrational Raman comb, extending from the vacuum ultraviolet (184 nm) to the visible (478 nm), in hydrogen-filled kagomé-style photonic crystal fiber pumped at 266 nm. Stimulated Raman scattering and molecular modulation processes are enhanced by higher Raman gain in the ultraviolet. Owing to the pressure-tunable normal dispersion landscape of the fiber-gas system in the ultraviolet, higher-order anti-Stokes bands are generated preferentially in higher-order fiber modes. The results pave the way towards tunable fiber-based sources of deep- and vacuum ultra…
An ultrafast fiber chirped-pulse amplification laser system based on coherent combination of 16 ytterbium-doped rod-type amplifiers is presented. It generates 10 mJ pulse energy at 1 kW average power and 120 fs pulse duration. A partially helium-protected, two-staged chirped-pulse amplification grating compressor is implemented to maintain the close to diffraction-limited beam quality by avoiding nonlinear absorption in air.
3D excitation-emission luminescence spectra of Bi-doped optical fibers of various compositions were measured in a wide wavelength range 450-1700 nm. Such luminescence spectra were obtained for Bi-doped pure silica and germania fibers, and for Bi-doped Al- or P-codoped silica fibers (at room and liquid nitrogen temperatures). The energy level schemes of IR bismuth active centers in pure silica and germania core fibers were derived from spectra obtained. The energy level schemes similarity of bismuth active centers in these two types of fibers was revealed.
An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam quality (M2<=1.2), and a low relative intensity noise of 0.56% in the frequency range of from 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hands-off operation.
We demonstrated the observation of Rb two-photon absorption directly excided by an optical frequency comb at fiber communication bands. A chain of comb spectral control is elaborately implemented to increase the power of the second harmonic optical frequency comb generation and the two-photon transition strength. A two-photon transition spectrum is obtained with clearly resolved transition lines. It provides a potential approach to realize the optical frequency comb or optical clock at ~1.5μm with high stability and accuracy.
We build on a previously reported frequency comb of mode spacing 0.136 nm in a fiber ring cavity of varying normal dispersion [1], to generate, for the first time, a frequency comb of mode spacing 0.144 nm centered at 978.544 nm to demonstrate the symmetry-breaking. By controlling the birefringence of the optical cavity through fiber stretching and polarization control, the spacing of the comb lines increases from 0.136 nm to 0.144 nm, and this small change in mode spacing generates very different spectral symmetry-breaking in the frequency comb relative to the frequency comb of mode spacing 0…
We demonstrate a route to supercontinuum generation in gas-filled hollow-core anti-resonant fibers through the creation of a broad vibrational Raman frequency comb followed by continuous broadening and merging of the comb lines through either rotational Raman scattering or the optical Kerr effect. Our demonstration experiments, utilizing a single pump pulse with 20 ps duration at 532 nm in a nitrogen-filled fiber, produce a supercontinuum spanning from 440 nm to 1200 nm, with an additional deep ultraviolet continuum from 250 nm to 360 nm. Numerical results suggest that this approach can produc…
We present full phase stabilization of an amplified Yb:fiber femtosecond frequency comb using an intra-cavity electro-optic modulator and an acousto-optic modulator. These transducers provide high servo bandwidths of 580 kHz and 250 kHz for frep and fceo, producing a robust and low phase noise fiber frequency comb. The comb was self-referenced with an f - 2f interferometer and phase locked to an ultra-stable optical reference used for the JILA Sr optical clock at 698 nm, exhibiting 0.21 rad and 0.47 rad of integrated phase errors (over 1 mHz - 1 MHz) respectively. Alternatively, the comb was l…
We demonstrate mid-infrared (mid-IR) supercontinuum generation (SCG) with instantaneous bandwidth from 2.2 to 5 μm at 40 dB below the peak, covering the wavelength range desirable for molecular spectroscopy and numerous other applications. The SCG occurs in a tapered As2S3 fiber prepared by in-situ tapering and is pumped by femtosecond pulses from the subharmonic of a mode-locked Er-doped fiber laser. Interference with a narrow linewidth c.w. laser verifies that the coherence properties of the near-IR frequency comb have been preserved through these cascaded nonlinear processes. With this appr…
Configurations for efficient free space coherent addition of four separate fiber lasers arranged in two dimensional array are presented. They include compact and robust interferometric combiners that can be inserted either inside or outside the cavity of the combined lasers system. The results reveal that over 85% combining efficiency can be obtained.
An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam quality is excellent (M2<1.24x1.10) and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable as it features an automated spatial and temporal alignment of the interferometric amplification channels.
We report an all-polarization-maintaining fiber optic approach to generating sub-2 cycle pulses at 2 μm and a corresponding octave-spanning optical frequency comb. Our configuration leverages mature Er:fiber laser technology at 1.5 μm to provide a seed pulse for a thulium-doped fiber amplifier that outputs 330 mW average power at 100 MHz repetition rate. Following amplification, nonlinear self-compression in fiber decreases the pulse duration to 9.5 fs, or 1.4 optical cycles. Approximately 32 % of the energy sits within the pulse peak, and the polarization extinction ratio is more than 15 dB. …
We present a technique for simultaneous power-combining and wavelength-conversion of multiple fiber lasers into a single, lower wavelength in a different band through Raman-based, nonlinear power combining. We illustrate this by power combining of two independent Ytterbium lasers into a single wavelength around 1.5micron with high output powers of upto 99W. A high conversion efficiency of ~64% of the quantum limited efficiency and a high level of wavelength conversion with >85% of the output power in the final wavelength is demonstrated. The proposed method enables power-scaling in various wav…
We report on the observation of puzzling nonuniform, but ordered, frequency combs in erbium-doped fiber lasers at low temperatures, between 3 K and 14 K. At ~14 K the combs disappear. The combs contain ~240 lines and have nonuniform frequency spacings that starts from ~25 GHz at ~1540.5 nm and decreases, almost monotonically, to ~100 MHz within (1.8-2) nm. We discuss possibilities that they result from enlarged regular mode-comb spacings, from prime numbers-based solitary waves free of four-wave mixing or result from gain gratings. However, we think that the combs originate from multi-lasing l…
Dual-comb microscopy (DCM), an interesting imaging modality based on the optical-frequency-comb (OFC) mode and image pixel one-to-one correspondence, benefits from scan-less full-field imaging and simultaneous confocal amplitude and phase imaging. However, the two fully frequency-stabilized OFC sources requirement hampers DCM practicality due to the complexity and costs. Here, a bidirectional single-cavity dual-comb fiber laser (SCDCFL) is adopted as a DCM low-complexity OFC source. Computational image correction reduces the image blur caused by the SCDCFL residual timing jitter. Nanometer-ord…
We generate a 200-nm optical frequency comb at 1.5 microns by injecting two single-frequency lasers into a highly nonlinear fiber, and explore its spectral phase properties and high power to demonstrate full nonlinear conversion into its second harmonic. Combs of optical frequencies with 100-nm (~ 48 THz) bandwidths, centered at 790-800 nm and spaced by 0.8-1 nm (380-470 GHz) were produced by second harmonic and multiple sum frequency generation simply by focusing into a 2-mm long nonlinear crystal. Conventional birefringence phase matching was used in normal incidence configuration without ti…
We demonstrate a broadband mid-infrared (MIR) frequency comb source based on difference frequency generation (DFG) in periodically poled lithium niobate (PPLN) crystal. Mid-infrared radiation is obtained via mixing of the output of a 125 MHz repetition rate Yb-doped fiber laser with Raman-shifted solitons generated from the same source in a highly nonlinear fiber. The resulting idler is tunable in the range of 2.7 - 4.2 μm with average output power reaching 237 mW, and pulses as short as 115 fs. The coherence of the MIR comb is confirmed by spectral interferometry and heterodyne beat measureme…
We report on a high-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator with a stabilized repetition rate at 250 MHz. The mid-infrared frequency comb is produced through difference frequency generation in a periodically poled MgO-doped lithium niobate crystal. The output power is about 120 mW with a pulse duration of about 80 fs, and spectrum coverage from 2.9 to 3.6 um. The coherence properties of the produced high-power broadband mid-infrared frequency comb are maintained, which was verified by heterodyne measurements. As the first application, the spectrum of…
All-polarization-maintaining, single-port Er:fiber combs offer long-term robust operation as well as high stability. We have built two such combs and evaluated the transfer noise for linking optical clocks. A uniformly broadened spectrum over 135-285 THz with a high signal-to-noise ratio enables the optical frequency measurement of the subharmonics of strontium, ytterbium, and mercury optical lattice clocks with the fractional frequency-noise power spectral density of $(1-2)\times 10^{-17}$ Hz$^{-1/2}$ at 1 Hz. By applying a synchronous clock comparison, the comb enables clock ratio measuremen…
Single-cycle pulses with deterministic carrier-envelope phase enable the study and control of light-matter interactions at the sub-cycle timescale, as well as the efficient generation of low-noise multi-octave frequency combs. However, current single-cycle light sources are difficult to implement and operate, hindering their application and accessibility in a wider range of research. In this paper, we present a single-cycle 100 MHz frequency comb in a compact, turn-key, and reliable all-silica-fiber format. This is achieved by amplifying 2 $μ$m seed pulses in heavily-doped Tm:fiber, followed b…
Comb-enabled spectral-domain image transport through perturbation-prone multimode fibers
State Key Laboratory of Precision Spectroscopy, and Hainan Institute, East China Normal University（精密光谱学国家重点实验室及海南研究院，华东师范大学）；Chongqing Key Laboratory of Precision Optics, Chongqing Institute of East China Normal University（精密光学重庆市重点实验室，华东理工大学重庆研究院）；Jinan Institute of Quantum Technology（济南量子技术研究院）；Shanghai Research Center for Quantum Sciences（上海量子科学研究中心）
The performance of fiber laser systems has drastically increased over recent decades, which has opened up new industrial and scientific applications for this technology. However, currently a number of physical effects prevents further power scaling. Coherent combination of beams from multiple emitters has been established as a power scaling technique beyond these limitations. It is possible to increase the average power and, for pulsed laser systems, also parameters such as the pulse energy and the peak power. To realize such laser systems, various aspects have to be taken into account which i…
We present a 100 MHz repetition rate Yb-fiber-laser-pumped synchronously pumped optical parametric oscillator (SPOPO) delivering tunable frequency combs covering almost the entire visible spectral range. By intracavity doubling both the signal and idler combs and using collinear residual pump light, nearly continuous tuning over the range of 420-700 nm is achieved with only small gaps near the OPO degeneracy condition. Output powers range from 10 mW to 200 mW, depending on wavelength, with pulse durations below 150 fs without external compression. Frequency locking of all three collinearly out…
We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz repetition rate with an excellent beam quality. Additionally, <500 fs pulses with up to 600 uJ of pulse energy were also realized with this setup. This architecture is intrinsically power scalable by increasing the number of cores in the fiber.
Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we pr…
We report a simple technique to suppress high frequency phase noise of a Yb-based fiber optical frequency comb using an active intensity noise servo. Out-of-loop measurements of the phase noise using an optical heterodyne beat with a continuous wave (cw) laser show suppression of phase noise by \geq7 dB out to Fourier frequencies of 100 kHz with a unity-gain crossing of -700 kHz. These results are enabled by the strong correlation between the intensity and phase noise of the laser. Detailed measurements of intensity and phase noise spectra, as well as transfer functions, reveal that the domina…
Dual-comb microscopy (DCM), based on a combination of dual-comb spectroscopy (DCS) with two-dimensional spectral encoding (2D-SE), is a promising method for scan-less confocal laser microscopy giving an amplitude and phase image contrast with the confocality. However, signal loss in a 2D-SE optical system hampers increase in image acquisition rate due to decreased signa-to-noise ratio. In this article, we demonstrated optical image amplification in DCM with an erbium-doped fiber amplifier (EDFA). Combined use of image-encoded DCS interferogram and EDFA benefits from not only the batch amplific…
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatial…
We designed and demonstrate a fiber-based amplified spontaneous emission (ASE) source with low spatial coherence, low temporal coherence, and high power per mode. ASE is produced by optically pumping a large gain core multimode fiber while minimizing optical feedback to avoid lasing. The fiber ASE source provides 270 mW of continuous wave emission, centered at λ=1055 nm with a full-width half-maximum bandwidth of 74 nm. The emission is distributed among as many as ~70 spatial modes, enabling efficient speckle suppression when combined with spectral compounding. Finally, we demonstrate speckle-…
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic modulator and a piezo-transducer, the repetition rate can be stabilized with high servo bandwidth in a range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6E-13 at 1 second integration time, limited by the measurement system; and it is inversely proportional to integration time in short …
Tunable low-phase-noise terahertz synthesis using a fiber-interferometer-referenced optical frequency comb and an EDFA-integrated Vernier cavity
Graduate School of Sciences and Technology for Innovation, Tokushima University（德岛大学科学技术创新研究生院）；Department of Physics, Toho University（东海大学物理系）；Institute of Post-LED Photonics (pLED), Tokushima University（德岛大学后LED光子学研究所）；Institute of Photonics and Human Health Frontier (IPHF), Tokushima University（德岛大学光子学与人类健康前沿研究所）；Sevensix Inc.（Sevensix公司）
Counter-propagating all-normal dispersion (CANDi) fiber laser is an emerging high-energy single-cavity dual-comb laser source. Its relative timing jitter (RTJ), a critical parameter for dual-comb timing precision and spectral resolution, has not been comprehensively investigated. In this paper, we enhance the state-of-the-art CANDi fiber laser pulse energy from 1 nJ to 8 nJ. We then introduce a novel reference-free RTJ characterization technique that provides shot-to-shot measurement capability at femtosecond precision for the first time. The measurement noise floor reaches 1.6x10-7 fs2/Hz, an…
This paper presents the progress in the fields of the modelling and design of lanthanide ion doped chalcogenide glass fiber lasers. It presents the laser cavity designs that have been developed in order to optimize the performance of lanthanide ion doped chalcogenide glass fiber lasers. Also various numerical algorithms that have been applied for the optimization of chalcogenide glass lasers are reviewed and compared. The comparison shows that a combination of less accurate but more robust algorithms with more accurate ones gives the most promising performance.
We present an entirely fiber based laser source for non-linear imaging with a novel approach for multi-color excitation. The high power output of an actively modulated and amplified picosecond fiber laser at 1064 nm is shifted to longer wavelengths by a combination of four-wave mixing and stimulated Raman scattering. By combining different fiber types and lengths, we control the non-linear wavelength conversion in the delivery fiber itself and can switch between 1064 nm, 1122 nm, and 1186 nm on-the-fly by tuning the pump power of the fiber amplifier and modulate the seed diodes. This is a prom…
Ultra-broadband long-period fiber grating with 10-dB bandwidth of 155 nm and 3-dB bandwidth of 415 nm is demonstrated around 1060 nm, which has been combined with a tunable ytterbium-doped fiber laser to generate optical doughnut beams in the spectral range from 1030 nm to 1099 nm, and the vector nature of generated optical fields are observed. The long-period fiber grating has also been used to transform the amplified spontaneous emission of an ytterbium-doped fiber amplifier into a broadband optical doughnut beam.
