Spin currents can modify the magnetic state of ferromagnetic ultrathin films through spin-orbit torque. They may be generated by means of spin-orbit interaction by either bulk or interfacial phenomena. Electrical transport measurements reveal a six-fold increase of the spin-orbit torque accompanied by a drastic reduction of the spin Hall magnetoresistance upon the introduction of a Cu interlayer in a Pt/Cu/Co/Pt structure with perpendicular magnetic anisotropy. We analyze the dependence of the spin Hall magnetoresistance with the thickness of the interlayer in the frame of a drift diffusion model that provides information on the expected spin currents and spin accumulations in the system. The results demonstrate that the major responsible of both effects is spin memory loss at the interface. The enhancement of the spin-orbit torque when introducing an interlayer opens the possibility to design more effient spintronic devices based on materials that are cheap and abundant such as copper.
We calculate the spin-transfer torque in Fe/MgO/Fe tunnel junctions and compare the results to those for all-metallic junctions. We show that the spin-transfer torque is interfacial in the ferromagnetic layer to a greater degree than in all-metallic junctions. This result originates in the half metallic behavior of Fe for the $Δ_1$ states at the Brillouin zone center; in contrast to all-metallic structures, dephasing does not play an important role. We further show that it is possible to get a component of the torque that is out of the plane of the magnetizations and that is linear in the bias…
We report that spin current transport across Pt-ferromagnet (FM) interfaces is strongly dependent on the type and the thickness of the FM layer and on post-deposition processing protocols. By employing both harmonic voltage measurements and spin-torque ferromagnetic resonance measurements, we find that the efficiency of the Pt spin Hall effect in exerting a damping-like spin torque on the FM ranges from < 0.05 to > 0.10 under different interfacial conditions. We also show that the temperature dependence of the spin torque efficiencies for both the damping-like torque and field-like torque is d…
We report the observation of the intrinsic damping-like spin-orbit torque (SOT) arising from the Berry curvature in metallic-magnet/CuO$_x$ heterostructures. We show that a robust damping-like SOT, an order of magnitude larger than a field-like SOT, is generated in the heterostructure despite the absence of the bulk spin-orbit effect in the CuO$_x$ layer. Furthermore, by tuning the interface oxidation level, we demonstrate that the field-like SOT changes drastically and even switches its sign, which originates from oxygen modulated spin-dependent disorder. These results provide an important in…
Using the first-principles non-equilibrium Green's function technique with supercell disorder averaging, we study the influence of interfacial intermixing on the spin-orbit torque in Co$\mid$Pt bilayers. Intermixing is modeled by inserting one or more monolayers of a disordered CoPt alloy between Co and Pt. Dampinglike torque is moderately enhanced by interfacial intermixing, while the fieldlike torque, which is small for abrupt interfaces, is strongly enhanced and becomes comparable to the dampinglike torque. The enhancement of the fieldlike torque is attributed to the interface between Co an…
We use a perturbative approach to study the effects of interfacial spin-orbit coupling in magnetic multilayers by treating the two-dimensional Rashba model in a fully three-dimensional description of electron transport near an interface. This formalism provides a compact analytic expression for current-induced spin-orbit torques in terms of unperturbed scattering coefficients, allowing computation of spin-orbit torques for various contexts, by simply substituting scattering coefficients into the formulas. It applies to calculations of spin-orbit torques for magnetic bilayers with bulk magnetis…
Spin relaxation torque ${\cal T}$ in uniform metallic ferromagnets with the spin-orbit interaction arising from random impurities is calculated microscopically. ${\cal T}$ is shown to be written by spatial derivatives of the electric field, but is not always given as a divergence of a torque dipole density. The result is due to the fast dissipation of the orbital angular momentum, and thus a conserving spin current cannot be defined. It is discussed that the $β$ term in the spin transfer torque can also be asymmetric.
We studied the spin torque efficiency and the Dzyaloshinskii-Moriya interaction (DMI) of heterostructures that contain interface(s) of Ir and Co. The current-induced shifts of the anomalous Hall loops were used to determine the spin torque efficiency and DMI of [Pt/Co/X] multilayers (X=Ir, Cu) as well as Ir/Co and Pt/Ir/Co reference films. We find the effective spin Hall angle and the spin diffusion length of Ir to be ~0.01 and less than ~1 nm, respectively. The short spin diffusion length and the high conductivity make Ir an efficient spin sink layer. Such spin sink layer can be used to contr…
It is shown that the quantum fluctuations of the electromagnetic field generally induce a torque at the interface of an anisotropic material with another anisotropic or isotropic material. It is proven that this torque depends on an interface zero-point energy determined by the dispersion of the interface (localized and extended) modes. Our theory demonstrates that the single-interface torque is essential to understand the Casimir physics of material systems with anisotropic elements and determines the equilibrium positions of the system.
We present a phenomenological theory of spin-orbit torques in a metallic ferromagnet with spin-relaxing boundaries. The model is rooted in the coupled diffusion of charge and spin in the bulk of the ferromagnet, where we account for the anomalous Hall effects as well as the anisotropic magnetoresistance in the corresponding constitutive relations for both charge and spin sectors. The diffusion equations are supplemented with suitable boundary conditions reflecting the spin-sink capacity of the environment. In inversion-asymmetric heterostructures, the uncompensated spin accumulation exerts a d…
Using the non-equilibrium Green's function technique, we calculate spin-orbit torques in a Mn$_2$Au/heavy-metal bilayer, where the heavy metal (HM) is W or Pt. Spin-orbit coupling (SOC) in the bulk of Mn$_2$Au generates strong fieldlike torquance, which is parallel on the two sublattices and scales linearly with the conductivity, and a weaker dampinglike torquance that is antiparallel on the two sublattices. Interfaces with W or Pt generate parallel dampinglike torques of opposite signs that are similar in magnitude to those in ferromagnetic bilayers and similarly insensitive to disorder. The …
We investigate the torque field and skyrmion movement at an interface between a ferromagnet hosting a skyrmion and a material with strong spin-orbit interaction. We analyze both semiconductor materials and topological insulators using a Hamiltonian model that includes a linear term. The spin torque inducing current is considered to flow in the single band limit therefore a quantum model of current is used. Skyrmion movement due spin transfer torque proves to be more difficult in presence of spin orbit interaction in the case where only interface in-plane currents are present. However, edge eff…
We experimentally investigate spin-orbit torques and spin pumping in NiFe/Pt bilayers with direct and interrupted interfaces. The damping-like and field-like torques are simultaneously measured with spin-torque ferromagnetic resonance tuned by a dc bias current, whereas spin pumping is measured electrically through the inverse spin Hall effect using a microwave cavity. Insertion of an atomically thin Cu dusting layer at the interface reduces the damping-like torque, field-like torque, and spin pumping by nearly the same factor of ~1.4. This finding confirms that the observed spin-orbit torques…
A three-dimensional self-consistent spin transport model is developed, which includes both tunnelling transport, as well as metallic transport. Using the spin accumulation computed either side of a tunnel barrier, spin torques are obtained, and it is shown the model reproduces both damping-like and field-like spin-transfer torques, with the expected sinusoidal angular dependence, and inverse ferromagnetic layer thickness dependence. An explicit solution to the drift-diffusion model is derived, which allows analysing the effect of both the reference and free layer thickness on the spin-transfer…
We present a calculation of current-induced torques in metallic magnetic multilayers derived from the spin-dependent transmission and reflection properties of the magnetic layers. A scattering formalism is employed to calculate the torques in a magnetic-nonmagnetic-magnetic trilayer, for currents perpendicular to the layers, in both the ballistic and diffusive regimes.
Spin pumping and spin-transfer torques are two reciprocal phenomena widely studied in ferromagnetic materials. However, pumping from antiferromagnets and its relation to current-induced torques have not been explored. By calculating how electrons scatter off a normal metal-antiferromagnetic interface, we derive pumped spin and staggered spin currents in terms of the staggered field, the magnetization, and their rates of change. For both compensated and uncompensated interfaces, spin pumping is of a similar magnitude as in ferromagnets with a direction controlled by the polarization of the driv…
Within the s-d model description, we derive the current-driven spin torque in a ferromagnet, taking explicitly into account a spin-relaxing Caldeira-Leggett bath coupling to the s-electrons. We derive Bloch-Redfield equations of motion for the s-electron spin dynamics, and formulate a systematic gradient expansion to obtain non-adiabatic (higher-order) corrections to the well-known adiabatic (first-order) spin torque. We provide simple analytical expressions for the second-order spin torque. The theory is applied to current-driven domain wall motion. Second-order contributions imply a deformat…
We have developed a drift-diffusion equation of spin transport in collinear bipartite metallic antiferromagnets. Starting from a model tight-binding Hamiltonian, we obtain the quantum kinetic equation within Keldysh formalism and expand it to the lowest order in spatial gradient using Wigner expansion method. In the diffusive limit, these equations track the spatio-temporal evolution of the spin accumulations and spin currents on each sublattice of the antiferromagnet. We use these equations to address the nature of spin transfer torque in (i) a spin-valve composed of a ferromagnet and an anti…
Phonon spectroscopy is used to investigate the mechanism of current-induced spin torques in nonmagnetic/ferromagnetic (N/F) point contacts. Magnetization excitations observed in the magneto-conductance of the point contacts are pronounced for diffusive and thermal contacts, where the electrons experience significant scattering in the contact region. We find no magnetic excitations in highly ballistic contacts. Our results show that impurity scattering at the N/F interface is the origin of the new single-interface spin torque effect.
A practical problem for memory applications involving perpendicularly magnetized magnetic tunnel junctions is the reliability of switching characteristics at high-bias voltage. Often it has been observed that at high-bias, additional error processes are present that cause a decrease in switching probability upon further increase of bias voltage. We identify the main cause of such error-rise process through examination of switching statistics as a function of bias voltage and applied field, and the junction switching dynamics in real time. These experiments show a coincidental onset of error-ri…
We study inserting Co layer thickness-dependent spin transport and spin-orbit torques (SOTs) in the Pt/Co/Py trilayers by spin-torque ferromagnetic resonance. The interfacial perpendicular magnetic anisotropy energy density ($K_s = 2.7~erg/cm^2$), which is dominated by interfacial spin-orbit coupling (ISOC) in the Pt/Co interface, total effective spin-mixing conductance ($G_{eff,tot} = 0.42 {\times} 10^{15}~Ω^{-1} m^{-2}$) and two-magnon scattering ($β_{TMS} = 0.46~nm^2$) are first characterized, and the damping-like torque ($ξ_{DL}$ = 0.103) and field-like torque ($ξ_{FL}$ = -0.017) efficienc…
A large unidirectional magnetoresistance (UMR) ratio of UMR/$R_{xx}\sim$ $0.36\%$ is found in W/CoFeB metallic bilayer heterostructures at room temperature. Three different regimes in terms of the current dependence of UMR ratio are identified: A spin-dependent-scattering mechanism regime at small current densities $J \sim$ $10$$^{9}$A/m$^{2}$ (UMR ratio $\propto$ $J$), a spin-magnon-interaction mechanism regime at intermediate $J \sim$ $10$$^{10}$A/m$^{2}$ (UMR ratio $\propto$ $J$$^{3}$), and a spin-transfer torque (STT) regime at $J \sim$ $10$$^{11}$A/m$^{2}$ (UMR ratio independent of $J$). …
Negligible current-induced torque from the bulk and interface of Al
Institute of Semiconductors, Chinese Academy of Sciences（中国科学院半导体研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Shaanxi Normal University（陕西师范大学）
The Rashba-Edelstein effect stems from the interaction between the electron's spin and its momentum induced by spin-orbit interaction at an interface or a surface. It was shown that the inverse Rashba-Edelstein effect can be used to convert a spin- into a charge current. Here, we demonstrate that a Bi/Ag Rashba interface can even drive an adjacent ferromagnet to resonance. We employ a spin-torque ferromagnetic resonance excitation/detection scheme which was developed originally for a bulk spin-orbital effect, the spin Hall effect. In our experiment, the direct Rashba-Edelstein effect generates…
Spin-orbit torques due to interfacial Rashba and spin Hall effects have been widely considered as a potentially more efficient approach than the conventional spin-transfer torque to control the magnetization of ferromagnets. We report a comprehensive study of spin-orbit torque efficiency in Ta(O)/Ni81Fe19 bilayers by tuning low-oxidation of \b{eta}-phase tantalum, and find that the spin Hall angle θDL increases from ~ -0.18 of the pure Ta/Py to the maximum value ~ -0.30 of Ta(O)/Py with 7.8% oxidation. Furthermore, we distinguish the efficiency of the spin-orbit torque generated by the bulk sp…
We study spin-dependent electron transport through a ferromagnetic-antiferromagnetic-normal metal tunneling junction subject to a voltage or temperature bias, in the absence of spin-orbit coupling. We derive microscopic formulas for various types of spin torque acting on the antiferromagnet as well as for charge and spin currents flowing through the junction. The obtained results are applicable in the limit of slow magnetization dynamics. We identify a parameter regime in which an unconventional damping-like torque can become comparable in magnitude to the equivalent of the conventional Sloncz…
The ability of spin-orbit interactions to convert charge current into spin current, most often in the bulk of heavy metal thin films, has been the hallmark of spintronics in the last decade. In this study, we demonstrate how the insertion of light metal element interface profoundly affects both the nature of spin-orbit torque and its efficiency in terms of damping-like ($H_{\text{DL}}$) and field-like ($H_{\text{FL}}$) effective fields in ultrathin Co ferromagnet. Indeed, we measure unexpectedly large $H_{\text{FL}}$/$H_{\text{DL}}$ ratio ($\sim$2.5) upon inserting a 1.4 nm thin Al layer in Pt…
(Bi$_{1-x}$Sb$_x$)$_2$Te$_3$ topological insulators (TIs) are gathering increasing attention owing to their large charge-to-spin conversion efficiency and the ensuing spin-orbit torques (SOTs) that can be used to manipulate the magnetization of a ferromagnet (FM). The origin of the torques, however, remains elusive, while the implications of hybridized states and the strong material intermixing at the TI/FM interface are essentially unexplored. By combining interface chemical analysis and spin-transfer ferromagnetic resonance (ST-FMR) measurements, we demonstrate that intermixing plays a criti…
In thin magnetic layers with structural inversion asymmetry and spin-orbit coupling, a Dzyaloshinskii-Moriya interaction arises at the interface. When a spin wave current ${\bf j}_m$ flows in a system with a homogeneous magnetization {\bf m}, this interaction produces an effective field-like torque on the form ${\bf T}_{\rm FL}\propto{\bf m}\times({\bf z}\times{\bf j}_m)$ as well as a damping-like torque, ${\bf T}_{\rm DL}\propto{\bf m}\times[({\bf z}\times{\bf j}_m)\times{\bf m}]$ in the presence of spin-wave relaxation (${\bf z}$ is normal to the interface). These torques mediated by the mag…
Spin transport in magnetic tunnel junctions in the presence of spin diffusion is considered theoretically. Combining ballistic tunneling across the barrier and diffusive transport in the electrodes, we solve the spin dynamics equation in the metallic layers. We show that spin diffusion mixes the transverse spin current components and dramatically modifies the bias dependence of the effective spin transfer torque. This leads to a significant linear bias dependence of the out-of-plane torque, as well as a non-conventional thickness dependence of both spin torque components.
We describe excitation of dipole-exchange spin waves in insulating magnetic thin films by spin current injection at the surface of the film. An easy-axis magnetic surface anisotropy can induce a non-chiral surface spin wave mode with penetration depth inversely proportional to the strength of the surface anisotropy, which strongly reduces the critical current and enhances the excitation power. The importance of the interface spin wave modes on the excitation spectrum is reduced by spin pumping, which depends on the quality of the interface as expressed by the spin mixing conductance.
Recent advances in the understanding of spin orbital effects in ultrathin magnetic heterostructures have opened new paradigms to control magnetic moments electrically. The Dzyaloshinskii-Moriya interaction (DMI) is said to play a key role in forming a Neel-type domain wall that can be driven by the spin Hall torque, a torque resulting from the spin current generated in a neighboring non-magnetic layer via the spin Hall effect. Here we show that the sign of the DMI, which determines the direction to which a domain wall moves with current, can be changed by modifying the adjacent non-magnetic la…
We study spin-orbit-torque-driven ferromagnetic resonance (FMR) in ferromagnetic (FM) bilayers, consisting of Co and permalloy (Py), sandwiched between Pt and MgO layers. We find that the FM layer in contact with the Pt layers dominantly determines that spin Hall angle, which is consistent with the spin-transparency model. By contrast, the FMR linewidths are considerably influenced not only by the spin-pumping effect across the Pt|FM in terface but also by the spin relaxation such as two-magnon scattering at the FMMgO interface.The CoMgO interface leads to notably increased FMR linewidths, whi…
Future applications of spin-orbit torque will require new mechanisms to improve the efficiency for switching nanoscale magnetic tunnel junctions (MTJs), while also controlling the magnetic dynamics to achieve fast, nanosecond scale performance with low write error rates. Here we demonstrate a strategy to simultaneously enhance the interfacial magnetic anisotropy energy and suppress interfacial spin memory loss by introducing sub-atomic and monatomic layers of Hf at the top and bottom interfaces of the ferromagnetic free layer of an in-plane magnetized three-terminal MTJ device. When combined w…
We report that current-induced spin-orbit torques (SOTs) in heavy-metal/ferromagnetic-metal bilayers are strongly altered by the oxidation of the ferromagnetic layer near the interface. We measured damping-like (DL) and field-like (FL) SOTs for Pt/Co and Pt/Ni$_{81}$Fe$_{19}$ (Pt/Py) films using spin-torque ferromagnetic resonance. In the Pt/Co film, we found that the oxidation of the Co layer near the interface enhances both DL and FL SOTs in spite of the insulating nature of the CoO$_x$ layer. The enhancement of the SOTs disappears by inserting a thin Ti layer at the Pt/CoO$_x$ interface, in…
Spin-orbit torques offer a promising mechanism for electrically controlling magnetization dynamics in nanoscale heterostructures. While spin-orbit torques occur predominately at interfaces, the physical mechanisms underlying these torques can originate in both the bulk layers and at interfaces. Classifying spin-orbit torques based on the region that they originate in provides clues as to how to optimize the effect. While most bulk spin-orbit torque contributions are well studied, many of the interfacial contributions allowed by symmetry have yet to be fully explored theoretically and experimen…
In systems with strong spin-orbit coupling, the relationship between spin-transfer torque and the divergence of the spin current is generalized to a relation between spin transfer torques, total angular momentum current, and mechanical torques. In ferromagnetic semiconductors, where the spin-orbit coupling is large, these considerations modify the behavior of the spin transfer torques. One example is a persistent spin transfer torque in a spin valve: the spin transfer torque does not decay away from the interface, but approaches a constant value. A second example is a mechanical torque at sing…
How spin-orbit torques emerge from materials with weak spin-orbit coupling (e.g., light metals) is an open question in spintronics. Here, we report on a field-like spin-orbit torque (i.e., in-plane spin-orbit field transverse to the current axis) in SiO$_2$-sandwiched permalloy (Py), with the top Py-SiO$_2$ interface incorporating ultrathin Ti or Cu. In both SiO$_2$/Py/Ti/SiO$_2$ and SiO$_2$/Py/Cu/SiO$_2$, this spin-orbit field opposes the classical Oersted field. While the magnitude of the spin-orbit field is at least a factor of 3 greater than the Oersted field, we do not observe evidence fo…
We predict that the magnetization direction of a ferromagnet can be reversed by the spin-transfer torque accompanying spin-polarized thermoelectric heat currents. We illustrate the concept by applying a finite-element theory of thermoelectric transport in disordered magnetoelectronic circuits and devices to metallic spin valves. When thermalization is not complete, a spin heat accumulation vector is found in the normal metal spacer, i.e., a directional imbalance in the temperature of majority and minority spins.
We investigate the relation between thermal spin-transfer torque (TSTT) and the spin-dependent Seebeck effect (SDSE), which produces a spin current when a temperature gradient is applied across a metallic ferromagnet, in nanopillar metallic spin valves. Comparing its angular dependence (aSDSE) with the angle dependent magnetoresistance (aMR) measurements on the same device, we are able to verify that a small spin heat accumulation builds up in our devices. From the SDSE measurement and the observed current driven STT switching current of 0.8 mA in our spin valve devices, it was estimated that …
We consider theoretically a current flowing perpendicular to interfaces of a spin-valve type ferromagnetic metallic junction. For the first time an effective approach is investigated to calculate a simultaneous action of the two current effects, namely, the nonequilibrium longitudinal spin injection and the transversal spin-transfer surface torque. Dispersion relation for fluctuations is derived and solved. Nonlinear problem is solved about steady state arising due to instability for a thick enough free layer.
Spin transport at metallic interfaces is an essential ingredient of various spintronic device concepts, such as giant magnetoresistance, spin-transfer torque, and spin pumping. Spin-orbit coupling plays an important role in many such devices. In particular, spin current is partially absorbed at the interface due to spin-orbit coupling. We develop a general magnetoelectronic circuit theory and generalize the concept of the spin mixing conductance, accounting for various mechanisms responsible for spin-flip scattering. For the special case when exchange interactions dominate, we give a simple ex…
We present new mechanism for manipulation of the spin-wave amplitude through the use of the dynamic charge-mediated magnetoelectric effect in ultrathin multilayers composed of dielectric thin-film capacitors separated by a ferromagnetic bilayer. Propagating spin waves can be amplified and attenuated with rising and decreasing slopes of the oscillating voltage, respectively, locally applied to the sample. The way the spin accumulation is generated makes the interaction of the spin-transfer torque with the magnetization dynamics mode-selective and restricted to some range of spin-wave frequencie…
Recently discovered relativistic spin torques induced by a lateral current at a ferromagnet/paramagnet interface are a candidate spintronic technology for a new generation of electrically-controlled magnetic memory devices. Phenomenologically, the torques have field-like and antidamping-like components with distinct symmetries. Microscopically, they are considered to have two possible origins. In one picture, a spin-current generated in the paramagnet via the relativistic spin Hall effect (SHE) is absorbed in the ferromagnet and induces the spin transfer torque (STT). In the other picture, a n…
We studied the effect of inserting 0.5 nm-thick spacer layers (Ti, V, Cr, Mo, W) at the Pt/Co interface on the spin-orbit torques, Hall effect, magnetoresistance, saturation magnetization, and magnetic anisotropy. We find that the damping-like spin-orbit torque decreases substantially for all samples with a spacer layer compared to the reference Pt/Co bilayer, consistently with the opposite sign of the atomic spin-orbit coupling constant of the spacer elements relative to Pt. The reduction of the damping-like torque is monotonic with atomic number for the isoelectronic 3d, 4d, and 5d elements,…
We investigate an interfacial spin-transfer torque and $β$-term torque with alternating current (AC) parallel to a magnetic interface. We find that both torques are resonantly enhanced as the AC frequency approaches to the exchange splitting energy. We show that this resonance allows us to estimate directly the interfacial exchange interaction strength from the domain wall motion. We also find that the $β$-term includes an unconventional contribution which is proportional to the time derivative of the current and exists even in absence of any spin relaxation processes.
We propose a spin-mechanical device to control and detect spin currents by mechanical torque. Our hybrid nano-electro-mechanical device, which contains a nanowire with a ferromagnetic-nonmagnetic interface, is designed to measure or induce spin polarized currents. Since spin carries angular momentum, a spin flip or spin transfer process involves a change in angular momentum--and hence, a torque--which enables mechanical measurement of spin flips. Conversely, an applied torque can result in spin polarization and spin current.
We consider a quasi one-dimensional configuration consisting of two small pieces of ferromagnetic material separated by a metallic one and contacted by two metallic leads. A spin-polarized current is injected from one lead. Our goal is to investigate the correlation induced between the magnetizations of the two ferromagnets by spin-transfer torque. This torque results from the interaction between the magnetizations and the spin polarization of the current. We discuss the dynamics of a single ferromagnet, the extension to the case of two ferromagnets, and give some estimates for the parameters …
The electronic and magnetic properties of the interfaces between the half-metallic Heusler alloys NiMnSb, NiMnSi and MgO have been investigated using first-principles density-functional calculations with projector augmented wave potentials generated in the generalized gradient approximation. In the case of the NiMnSb/MgO (100) interface the half-metallicity is lost, whereas the MnSb/MgO contact in the NiMnSb/MgO (100) interface maintains a substantial degree of spin polarization at the Fermi level ($\sim 60$%). Remarkably, the NiMnSi/MgO (111) interface shows 100% spin polarization at the Ferm…
We review a unified approach for computing: (i) spin-transfer torque in magnetic trilayers like spin-valves and magnetic tunnel junction, where injected charge current flows perpendicularly to interfaces; and (ii) spin-orbit torque in magnetic bilayers of the type ferromagnet/spin-orbit-coupled-material, where injected charge current flows parallel to the interface. Our approach requires to construct the torque operator for a given Hamiltonian of the device and the steady-state nonequilibrium density matrix, where the latter is expressed in terms of the nonequilibrium Green's functions and spl…
The magnitude of spin-orbit torque (SOT), exerted to a ferromagnet (FM) from an adjacent heavy metal (HM), strongly depends on the amount of spin currents absorbed in the FM. We exploit the large spin absorption at the Ru interface to manipulate the SOTs in HM/FM/Ru multilayers. While the FM thickness is smaller than its spin dephasing length of 1.2 nm, the top Ru layer largely boosts the absorption of spin currents into the FM layer and substantially enhances the strength of SOT acting on the FM. Spin-pumping experiments induced by ferromagnetic resonance support our conclusions that the obse…
The spin Hall effect (SHE) converts charge current to pure spin currents in orthogonal directions in materials that have significant spin-orbit coupling.The efficiency of the conversion is described by the spin Hall Angle (SHA). The SHA can most readily be inferred by using the generated spin currents to excite or rotate the magnetization of ferromagnetic films or nano-elements via spin-transfer torques.Some of the largest spin torque derived spin Hall angles (ST-SHA) have been reported in platinum. Here we show, using spin torque ferromagnetic resonance (ST-FMR) measurements, that the transpa…
We have fabricated nanoscale magnetic tunnel junctions (MTJs) with an additional fixed magnetic layer added above the magnetic free layer of a standard MTJ structure. This acts as a second source of spin-polarized electrons that, depending on the relative alignment of the two fixed layers, either augments or diminishes the net spin-torque exerted on the free layer. The compound structure allows a quantitative comparison of spin-torque from tunneling electrons and from electrons passing through metallic spacer layers, as well as analysis of Joule selfheating effects. This has significance for c…
