Cellular-connected unmanned aerial vehicle (UAV) is a promising technology to unlock the full potential of UAVs in the future. However, how to achieve ubiquitous three-dimensional (3D) communication coverage for the UAVs in the sky is a new challenge. In this paper, we tackle this challenge by a new coverage-aware navigation approach, which exploits the UAV's controllable mobility to design its navigation/trajectory to avoid the cellular BSs' coverage holes while accomplishing their missions. We formulate an UAV trajectory optimization problem to minimize the weighted sum of its mission completion time and expected communication outage duration, and propose a new solution approach based on the technique of deep reinforcement learning (DRL). To further improve the performance, we propose a new framework called simultaneous navigation and radio mapping (SNARM), where the UAV's signal measurement is used not only for training the deep Q network (DQN) directly, but also to create a radio map that is able to predict the outage probabilities at all locations in the area of interest. This thus enables the generation of simulated UAV trajectories and predicting their expected returns, which are then used to further train the DQN via Dyna technique, thus greatly improving the learning efficiency.
Trinity College Dublin（都柏林圣三一学院）；Virginia Tech（弗吉尼亚理工大学）
Providing reliable connectivity to cellular-connected UAV can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs. On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a RL algorithm to dynamically optimise the height of a UAV as it moves through the environment, with the goal of increasing the throughput or sp…
Unmanned Aerial Vehicles (UAVs) promise to become an intrinsic part of next generation communications, as they can be deployed to provide wireless connectivity to ground users to supplement existing terrestrial networks. The majority of the existing research into the use of UAV access points for cellular coverage considers rotary-wing UAV designs (i.e. quadcopters). However, we expect fixed-wing UAVs to be more appropriate for connectivity purposes in scenarios where long flight times are necessary (such as for rural coverage), as fixed-wing UAVs rely on a more energy-efficient form of flight …
School of Electrical and Information Engineering, The University of Sydney（悉尼大学电气与信息工程学院）
This paper studies the path design problem for cellular-connected unmanned aerial vehicle (UAV), which aims to minimize its mission completion time while maintaining good connectivity with the cellular network. We first argue that the conventional path design approach via formulating and solving optimization problems faces several practical challenges, and then propose a new reinforcement learning-based UAV path design algorithm by applying \emph{temporal-difference} method to directly learn the \emph{state-value function} of the corresponding Markov Decision Process. The proposed algorithm is…
King’s College London（伦敦国王学院）；Ericsson Inc.（爱立信公司）
Cellular-connected unmanned aerial vehicle (UAV) swarm is a promising solution for diverse applications, including cargo delivery and traffic control. However, it is still challenging to communicate with and control the UAV swarm with high reliability, low latency, and high energy efficiency. In this paper, we propose a two-phase command and control (C&C) transmission scheme in a cellular-connected UAV swarm network, where the ground base station (GBS) broadcasts the common C&C message in Phase I. In Phase II, the UAVs that have successfully decoded the C&C message will relay the message to th…
Unmanned Aerial Vehicles (UAVs) have attracted considerable research interest recently. Especially when it comes to the realm of Internet of Things, the UAVs with Internet connectivity are one of the main demands. Furthermore, the energy constraint i.e. battery limit is a bottle-neck of the UAVs that can limit their applications. We try to address and solve the energy problem. Therefore, a path planning method for a cellular-connected UAV is proposed that will enable the UAV to plan its path in an area much larger than its battery range by getting recharged in certain positions equipped with p…
DEI - CNIT University of Bologna（博洛尼亚大学 DEI - CNIT）；CNR-IEIIT（意大利国家研究委员会电子、信息工程与电信研究所）；ECE Department Stony Brook University（石溪大学电子与计算机工程系）
In this paper, we study a joint detection, mapping and navigation problem for a single unmanned aerial vehicle (UAV) equipped with a low complexity radar and flying in an unknown environment. The goal is to optimize its trajectory with the purpose of maximizing the mapping accuracy and, at the same time, to avoid areas where measurements might not be sufficiently informative from the perspective of a target detection. This problem is formulated as a Markov decision process (MDP) where the UAV is an agent that runs either a state estimator for target detection and for environment mapping, and a…
Stevens Institute of Technology（斯蒂文斯理工学院）；University of Carthage（迦太基大学）
In this paper, we propose an autonomous UAV path planning framework using deep reinforcement learning approach. The objective is to employ a self-trained UAV as a flying mobile unit to reach spatially distributed moving or static targets in a given three dimensional urban area. In this approach, a Deep Deterministic Policy Gradient (DDPG) with continuous action space is designed to train the UAV to navigate through or over the obstacles to reach its assigned target. A customized reward function is developed to minimize the distance separating the UAV and its destination while penalizing collis…
Kyung Hee University（庆熙大学）；The University of Sydney（悉尼大学）；University of Houston（休斯顿大学）
In this paper, we design a navigation policy for multiple unmanned aerial vehicles (UAVs) where mobile base stations (BSs) are deployed to improve the data freshness and connectivity to the Internet of Things (IoT) devices. First, we formulate an energy-efficient trajectory optimization problem in which the objective is to maximize the energy efficiency by optimizing the UAV-BS trajectory policy. We also incorporate different contextual information such as energy and age of information (AoI) constraints to ensure the data freshness at the ground BS. Second, we propose an agile deep reinforceme…
Research Institute of Electrical and Computer Engineering, Hanyang University（汉阳大学电气与计算机工程研究所）；Hanyang University（汉阳大学）
In this paper, we propose SACHER (soft actor-critic (SAC) with hindsight experience replay (HER)), which constitutes a class of deep reinforcement learning (DRL) algorithms. SAC is known as an off-policy model-free DRL algorithm based on the maximum entropy framework, which outperforms earlier DRL algorithms in terms of exploration, robustness and learning performance. However, in SAC, maximizing the entropy-augmented objective may degrade the optimality of learning outcomes. HER is known as a sample-efficient replay method that enhances the performance of off-policy DRL algorithms by allowing…
A novel framework is proposed for cellular offloading with the aid of multiple unmanned aerial vehicles (UAVs), while the non-orthogonal multiple access (NOMA) technique is employed at each UAV to further improve the spectrum efficiency of the wireless network. The optimization problem of joint three-dimensional (3D) trajectory design and power allocation is formulated for maximizing the throughput. Since ground mobile users are considered as roaming continuously, the UAVs need to be re-deployed timely based on the movement of users. In an effort to solve this pertinent dynamic problem, a K-me…
Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular ne…
In this article, we consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs coexist with the uplink (UL) of cellular ground users (GUEs). Our analysis focuses on comparing two spectrum sharing mechanisms: i) overlay, where the available time-frequency resources are split into orthogonal portions for U2U and GUE communications, and ii) underlay, where the same resources may be accessed by both link types, resulting in mutual interference. We evaluate the coverage probability and rate of all links and their interplay to identify the best spectrum sharing mechanism. A…
Supporting reliable and seamless mobility for aerial users, such as unmanned aerial vehicles (UAVs), is a key challenge for the next-generation cellular systems. To tackle this challenge, we propose a joint beamforming, user association, and UAV-height control framework for cellular-connected multi-UAV networks with multiple antenna base stations (BSs). With the aim of maximizing the minimum achievable rate for UAVs subject to co-existed terrestrial user equipment's rate constraints, we devise a hierarchical bi-layer iterative algorithm to optimize BSs' beamforming vectors, UAV association mat…
Unmanned Aerial Vehicles (UAVs) are emerging as important users of next-generation cellular networks. By operating in the sky, UAV users experience very different radio conditions than terrestrial users, due to factors such as strong Line-of-Sight (LoS) channels (and interference) and Base Station (BS) antenna misalignment. As a consequence, the UAVs may experience significant degradation to their received quality of service, particularly when they are moving and are subject to frequent handovers. The solution is to allow the UAV to be aware of its surrounding environment, and intelligently co…
Fifth Generation (5G) cellular networks are expected to provide cellular connectivity for vehicular users, including Unmanned Aerial Vehicles (UAVs). When flying in the air, these users experience strong, unobstructed channel conditions to a large number of Base Stations (BSs) on the ground. This creates very strong interference conditions for the UAV users, while at the same time offering them a large number of BSs to potentially associate with for cellular service. Therefore, to maximise the performance of the UAV-BS wireless link, the UAV user needs to be able to choose which BSs to connect…
We consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs share the same spectrum with the uplink (UL) of cellular ground users (GUEs). For this setup, we focus on analyzing and comparing the performance of two spectrum sharing mechanisms: (i) underlay, where the same time-frequency resources may be accessed by both UAVs and GUEs, resulting in mutual interference, and (ii)overlay, where the available resources are divided into orthogonal portions for U2U and GUE communications. We evaluate the coverage probability and rate of both link types and their interplay to…
Aerial-ground interference mitigation has been deemed as the main challenge in realizing cellular-connected unmanned aerial vehicle (UAV) communications. Due to the line-of-sight (LoS)-dominant air-ground channels, the UAV generates/suffers much stronger interference to/from cellular base stations (BSs) over a much larger region in its uplink/downlink communication, as compared to the terrestrial users. As a result, conventional inter-cell interference coordination (ICIC) techniques catered for terrestrial networks become ineffective in mitigating the more severe UAV-induced interference. To d…
The purpose of this article is to bestow the reader with a timely study of UAV cellular communications, bridging the gap between the 3GPP standardization status quo and the more forward-looking research. Special emphasis is placed on the downlink command and control (C&C) channel to aerial users, whose reliability is deemed of paramount technological importance for the commercial success of UAV cellular communications. Through a realistic side-by-side comparison of two network deployments -- a present-day cellular infrastructure versus a next-generation massive MIMO system -- a plurality of ke…
Providing connectivity to unmanned aerial vehicle-user equipments such as drones or flying taxis is a major challenge for tomorrow cellular systems. In this paper, the use of coordinated multi-point transmission for providing seamless connectivity to UAV user equipments is investigated. In particular, a network of clustered ground base stations that cooperatively serve a number of UAVUEs is considered. Two scenarios are studied: scenarios with static, hovering UAV user equipments and scenarios with mobile UAV-UEs. Under a maximum ratio transmission, a novel framework is developed and leveraged…
This paper considers an emerging cellular-connected unmanned aerial vehicle (UAV) architecture for surveillance or monitoring applications. We consider a scenario where a cellular-connected aerial user equipment (AUE) periodically transmits in uplink, with a given data rate requirement, while moving along a given trajectory. For efficient spectrum usage, we enable the concurrent uplink transmission of the AUE and a terrestrial user equipment (TUE) by employing power-domain aerial-terrestrial non-orthogonal multiple access (NOMA), while accounting for the AUE's known trajectory. To characterize…
Providing seamless connectivity to unmanned aerial vehicle user equipments (UAV-UEs) is very challenging due to the encountered line-of-sight interference and reduced gains of down-tilted base station (BS) antennas. For instance, as the altitude of UAV-UEs increases, their cell association and handover procedure become driven by the side-lobes of the BS antennas. In this paper, the performance of cellular-connected UAV-UEs is studied under 3D practical antenna configurations. Two scenarios are studied: scenarios with static, hovering UAV- UEs and scenarios with mobile UAV-UEs. For both scenari…
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
Mounting compact and lightweight base stations on unmanned aerial vehicles (UAVs) is a cost-effective and flexible solution to provide seamless coverage on the existing terrestrial networks. While the coverage probability in UAV-assisted cellular networks has been widely investigated, it provides only the first-order statistic of signal-to-interference-plus-noise ratio (SINR). In this paper, to analyze high-order statistics of SINR and characterize the disparity among individual links, we provide a meta distribution (MD)-based analytical framework for UAV-assisted cellular networks, in which t…
This paper aims to propose a three-dimensional (3D) point process model that can be employed to generally deploy unmanned aerial vehicles (UAVs) in a large-scale cellular network and tractably analyze the fundamental network-wide performances of the network. The proposed 3D point process is devised based on a 2D homogeneous marked Poisson point process (PPP) in which each point and its random mark uniquely correspond to the projection and the altitude of each point in the 3D point process, respectively. We study some of the important statistical properties of the proposed 3D point process and …
The enabling of safe cellular controlled unmanned aerial vehicle (UAV) beyond visual line of sight is expected to open important future opportunities in the area of transportation, goods delivery, and system monitoring. A key challenge in this area lies in the design of trajectories which, while allowing the completion of the UAV mission, can guarantee reliable cellular connectivity all along the path. Previous approaches in this domain have considered simplistic propagation model assumptions (e.g. Line of Sight based) or more advanced models but with computationally demanding optimized soluti…
The line-of-sight dominant air-ground channels have posed critical interference issues in cellular-connected unmanned aerial vehicle (UAV) communications. In this paper, we propose a new base station (BS) cooperative beamforming (CB) technique for the cellular downlink to mitigate the strong interference caused by the co-channel terrestrial transmissions to the UAV. Besides the conventional CB by cooperatively transmitting the UAV's message, the serving BSs of the UAVs exploit a novel interference transmission scheme to effectively suppress the terrestrial interference to the UAV. Specifically…
In the existing cellular networks, it remains a challenging problem to communicate with and control an unmanned aerial vehicle (UAV) swarm with both high reliability and low latency. Due to the UAV swarm's high working altitude and strong ground-to-air channels, it is generally exposed to multiple ground base stations (GBSs), while the GBSs that are serving ground users (occupied GBSs) can generate strong interference to the UAV swarm. To tackle this issue, we propose a novel two-phase transmission protocol by exploiting cellular plus device-to-device (D2D) communication for the UAV swarm. In …
Unmanned aerial vehicles (UAVs) can be powerful Internet-of-Things components to execute sensing tasks over the next-generation cellular networks, which are generally referred to as the cellular Internet of UAVs. However, due to the high mobility of UAVs and the shadowing in the air-to-ground channels, UAVs operate in an environment with dynamics and uncertainties. Therefore, UAVs need to improve the quality of service (QoS) of sensing and communication without complete information, which makes reinforcement learning suitable to be employed in the cellular Internet of UAVs. In this article, we…
Aerial-ground interference is the main obstacle to achieving high spectral efficiency in cellular networks with both traditional terrestrial users and new unmanned aerial vehicle (UAV) users. Due to their strong line-of-sight (LoS) channels with the ground, UAVs could cause/suffer severe interference to/from a large number of non-associated but co-channel base stations (BSs) in their uplink/downlink communications. In this letter, we propose a new cooperative interference cancellation (CIC) scheme for the UAV's uplink communication to mitigate its strong interference to co-channel BSs, which r…
In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through …
This paper explores the effects of three-dimensional (3D) antenna radiation pattern and backhaul constraint on optimal 3D path planning problem of an unmanned aerial vehicle (UAV), in interference prevalent downlink cellular networks. We consider a cellular-connected UAV that is tasked to travel between two locations within a fixed time and it can be used to improve the cellular connectivity of ground users by acting as a relay. Since the antenna gain of a cellular base station changes significantly with the UAV altitude, the UAV can increase the signal quality in its backhaul link by changing…
In this paper, we propose a joint indoor localization and navigation algorithm to enable a swarm of unmanned aerial vehicles (UAVs) to deploy in a specific spatial formation in indoor environments. In the envisioned scenario, we consider a static user acting as a central unit whose main task is to acquire all the UAV measurements carrying position-dependent information and to estimate the UAV positions when there is no existing infrastructure for positioning. Subsequently, the user exploits the estimated positions as inputs for the navigation control with the aim of deploying the UAVs in a des…
Unmanned aerial vehicles (UAVs) technique has been recognized as a promising solution in future wireless connectivity from the sky, and UAV navigation is one of the most significant open research problems, which has attracted wide interest in the research community. However, the current UAV navigation schemes are unable to capture the UAV motion and select the best UAV-ground links in real time, and these weaknesses overwhelm the UAV navigation performance. To tackle these fundamental limitations, in this paper, we merge the state-of-theart deep reinforcement learning with the UAV navigation t…
As an emerging field of aerial robotics, Unmanned Aerial Vehicles (UAVs) have gained significant research interest within the wireless networking research community. As soon as national legislations allow UAVs to fly autonomously, we will see swarms of UAV populating the sky of our smart cities to accomplish different missions: parcel delivery, infrastructure monitoring, event filming, surveillance, tracking, etc. The UAV ecosystem can benefit from existing 5G/B5G cellular networks, which can be exploited in different ways to enhance UAV communications. Because of the inherent characteristics …
Cellular-connected unmanned aerial vehicles (UAVs) are expected to play a major role in various civilian and commercial applications in the future. While existing cellular networks can provide wireless coverage to UAV user equipment (UE), such legacy networks are optimized for ground users which makes it challenging to provide reliable connectivity to aerial UEs. To ensure reliable and effective mobility management for aerial UEs, estimating the velocity of cellular-connected UAVs carries critical importance. In this paper, we introduce an approximate probability mass function (PMF) of handove…
Cellular systems are vulnerable to jamming attacks, especially smart jammers that choose their jamming policies such as the jamming channel frequencies and power based on the ongoing communication policies and network states. In this article, we present an unmanned aerial vehicle (UAV) aided cellular communication framework against jamming. In this scheme, UAVs use reinforcement learning methods to choose the relay policy for mobile users in cellular systems, if the serving base station is heavily jammed. More specifically, we propose a deep reinforcement learning based UAV relay scheme to hel…
Airborne base stations (carried by drones) have a great potential to enhance coverage and capacity of cellular networks. Multiple scenarios and use cases will highly benefit from such technology such as (i) offloading terrestrial base stations (BSs) in dense and urban areas, and (ii) providing coverage for rural areas. However, one of the main challenges facing the deployment of airborne BSs is the limited available energy at the drone, which limits the flight time. In fact, most of the currently used unmanned aerial vehicles (UAVs) can only operate for one hour maximum. This limits the perfor…
The usage of beamforming in Unmanned Aerial Vehicles (UAVs) has the potential of significantly improving the air-to-ground link quality. This paper presents the outcome of experimental trial of such a UAV-based beamforming system over live cellular networks. A testbed with directional antennas has been built for the experiments. It is shown that beamforming can extend the signal coverage due to antenna gain, as well as spatially reduce interference leading to higher signal quality. Moreover, it has a positive impact on the mobility performance of a flying UAV by reducing handover occurrences. …
In this paper, we address the problem of finding the optimal trajectory for an unmanned aerial vehicle (UAV) for improving the wireless coverage of a terrestrial cellular network. In particular, we consider a UAV that is tasked to travel from one point to another within a given time constraint, and it can also simultaneously assist the cellular network by providing wireless coverage during its mission. Considering an interference limited downlink of a cellular network, we formulate an optimization problem for maximizing the proportional-fair (PF) data rate of the cellular network and explore d…
Unmanned aerial vehicles (UAVs) can provide an effective solution for improving the coverage, capacity, and the overall performance of terrestrial wireless cellular networks. In particular, UAV-assisted cellular networks can meet the stringent performance requirements of the fifth generation new radio (5G NR) applications. In this paper, the problem of energy-efficient resource allocation in UAV-assisted cellular networks is studied under the reliability and latency constraints of 5G NR applications. The framework of ruin theory is employed to allow solar-powered UAVs to capture the dynamics o…
The pervasiveness of the wireless cellular network can be a key enabler for the deployment of autonomous unmanned aerial vehicles (UAVs) in beyond visual line of sight scenarios without human control. However, traditional cellular networks are optimized for ground user equipment (GUE) such as smartphones which makes providing connectivity to flying UAVs very challenging. Moreover, ensuring better connectivity to a moving cellular-connected UAV is notoriously difficult due to the complex air-to-ground path loss model. In this paper, a novel mechanism is proposed to ensure robust wireless connec…
Recently, as a consequence of the COVID-19 pandemic, dependence on telecommunication for remote working and telemedicine has significantly increased. In cellular networks, incorporation of Unmanned Aerial Vehicles (UAVs) can result in enhanced connectivity for outdoor users due to the high probability of establishing Line of Sight (LoS) links. The UAV's limited battery life and its signal attenuation in indoor areas, however, make it inefficient to manage users' requests in indoor environments. Referred to as the Cluster centric and Coded UAV-aided Femtocaching (CCUF) framework, the network's …
Cellular network-connected unmanned aerial vehicles (UAVs) experience different radio propagation conditions than radio nodes on the ground. Therefore, it has become critical to investigate the performance of aerial radios, both theoretically and through field trials. In this paper, we consider low-altitude aerial nodes that are served by an experimental cellular network. We provide a detailed description of the hardware and software components needed for establishing a broadband wireless testbed for UAV communications research using software radios. Results show that a testbed for innovation …
What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cel…
Recently, the unmanned aerial vehicles (UAVs) have been widely used in real-time sensing applications over cellular networks, which sense the conditions of the tasks and transmit the real-time sensory data to the base station (BS). The performance of a UAV is determined by the performance of both its sensing and transmission processes, which are influenced by the trajectory of the UAV. However, it is challenging for UAVs to design their trajectories efficiently, since they work in a dynamic environment. To tackle this challenge, in this paper, we adopt the reinforcement learning framework to s…
Intelligent reflective surfaces (IRSs) capable of reconfiguring their electromagnetic absorption and reflection properties in real-time are offering unprecedented opportunities to enhance wireless communication experience in challenging environments. In this paper, we analyze the potential of IRS in enhancing cellular communications for UAVs, which currently suffers from poor signal strength due to the down-tilt of base station antennas optimized to serve ground users. We consider deployment of IRS on building walls, which can be remotely configured by cellular base stations to coherently dire…
To prolong the lifetime of the unmanned aerial vehicles (UAVs), the UAVs need to fulfill their missions in the shortest possible time. In addition to this requirement, in many applications, the UAVs require a reliable internet connection during their flights. In this paper, we minimize the travel time of the UAVs, ensuring that a probabilistic connectivity constraint is satisfied. To solve this problem, we need a global model of the outage probability in the environment. Since the UAVs have different missions and fly over different areas, their collected data carry local information on the net…
Up until now, path planning for unmanned aerial vehicles (UAVs) has mainly been focused on the optimisation towards energy efficiency. However, to operate UAVs safely, wireless coverage is of utmost importance. Currently, deployed cellular networks often exhibit an inadequate performance for aerial users due to high amounts of intercell interference. Furthermore, taking the never-ending trend of densification into account, the level of interference experienced by UAVs will only increase in the future. For the purpose of UAV trajectory planning, wireless coverage should be taken into account to…
In the current unmanned aircraft systems (UASs) for sensing services, unmanned aerial vehicles (UAVs) transmit their sensory data to terrestrial mobile devices over the unlicensed spectrum. However, the interference from surrounding terminals is uncontrollable due to the opportunistic channel access. In this paper, we consider a cellular Internet of UAVs to guarantee the Quality-of-Service (QoS), where the sensory data can be transmitted to the mobile devices either by UAV-to-Device (U2D) communications over cellular networks, or directly through the base station (BS). Since UAVs' sensing and …
Cellular-connected unmanned aerial vehicles (UAVs) are recently getting significant attention due to various practical use cases, e.g., surveillance, data gathering, purchase delivery, among other applications. Since UAVs are low power nodes, energy and spectral efficient communication is of paramount importance. To that end, multiple access (MA) schemes can play an important role in achieving high energy efficiency and spectral efficiency. In this work, we introduce rate-splitting MA (RSMA) and non-orthogonal MA (NOMA) schemes in a cellular-connected UAV network. In particular, we investigate…
In this paper, we consider the cellular Internet of unmanned aerial vehicles (UAVs), where UAVs sense data for multiple tasks and transmit the data to the base station (BS). To quantify the "freshness" of the data at the BS, we bring in the concept of the age of information (AoI). The AoI is determined by the time for UAV sensing and that for UAV transmission, and gives rise to a trade-off within a given period. To minimize the AoI, we formulate a joint sensing time, transmission time, UAV trajectory, and task scheduling optimization problem. To solve this problem, we first propose an iterativ…
