Aerial-ground interference mitigation has been deemed as the main challenge in realizing cellular-connected unmanned aerial vehicle (UAV) communications. Due to the line-of-sight (LoS)-dominant air-ground channels, the UAV generates/suffers much stronger interference to/from cellular base stations (BSs) over a much larger region in its uplink/downlink communication, as compared to the terrestrial users. As a result, conventional inter-cell interference coordination (ICIC) techniques catered for terrestrial networks become ineffective in mitigating the more severe UAV-induced interference. To deal with this new challenge, this letter introduces a cognitive radio based solution by treating the UAV and terrestrial users as secondary and primary users in the network, respectively. In particular, the LoS channels with terrestrial BSs/users endow the UAV with a powerful spectrum sensing capability for detecting the terrestrial signals over a much larger region than its serving BS. By exploiting this unique feature, we propose a new UAV-sensing-assisted ICIC design for both the UAV downlink and uplink communications. Specifically, the UAV senses its received interference and the transmissions of terrestrial users in the downlink and uplink, respectively, over the resource blocks (RBs) available at its serving BS to assist its RB allocation to the UAV for avoiding the interference with co-channel terrestrial communications. Numerical results demonstrate that the proposed UAV-assisted ICIC outperforms the conventional terrestrial ICIC by engaging the neighboring BSs for cooperation only.
Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular ne…
In this article, we consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs coexist with the uplink (UL) of cellular ground users (GUEs). Our analysis focuses on comparing two spectrum sharing mechanisms: i) overlay, where the available time-frequency resources are split into orthogonal portions for U2U and GUE communications, and ii) underlay, where the same resources may be accessed by both link types, resulting in mutual interference. We evaluate the coverage probability and rate of all links and their interplay to identify the best spectrum sharing mechanism. A…
Supporting reliable and seamless mobility for aerial users, such as unmanned aerial vehicles (UAVs), is a key challenge for the next-generation cellular systems. To tackle this challenge, we propose a joint beamforming, user association, and UAV-height control framework for cellular-connected multi-UAV networks with multiple antenna base stations (BSs). With the aim of maximizing the minimum achievable rate for UAVs subject to co-existed terrestrial user equipment's rate constraints, we devise a hierarchical bi-layer iterative algorithm to optimize BSs' beamforming vectors, UAV association mat…
Unmanned Aerial Vehicles (UAVs) are emerging as important users of next-generation cellular networks. By operating in the sky, UAV users experience very different radio conditions than terrestrial users, due to factors such as strong Line-of-Sight (LoS) channels (and interference) and Base Station (BS) antenna misalignment. As a consequence, the UAVs may experience significant degradation to their received quality of service, particularly when they are moving and are subject to frequent handovers. The solution is to allow the UAV to be aware of its surrounding environment, and intelligently co…
Fifth Generation (5G) cellular networks are expected to provide cellular connectivity for vehicular users, including Unmanned Aerial Vehicles (UAVs). When flying in the air, these users experience strong, unobstructed channel conditions to a large number of Base Stations (BSs) on the ground. This creates very strong interference conditions for the UAV users, while at the same time offering them a large number of BSs to potentially associate with for cellular service. Therefore, to maximise the performance of the UAV-BS wireless link, the UAV user needs to be able to choose which BSs to connect…
We consider a cellular network deployment where UAV-to-UAV (U2U) transmit-receive pairs share the same spectrum with the uplink (UL) of cellular ground users (GUEs). For this setup, we focus on analyzing and comparing the performance of two spectrum sharing mechanisms: (i) underlay, where the same time-frequency resources may be accessed by both UAVs and GUEs, resulting in mutual interference, and (ii)overlay, where the available resources are divided into orthogonal portions for U2U and GUE communications. We evaluate the coverage probability and rate of both link types and their interplay to…
The purpose of this article is to bestow the reader with a timely study of UAV cellular communications, bridging the gap between the 3GPP standardization status quo and the more forward-looking research. Special emphasis is placed on the downlink command and control (C&C) channel to aerial users, whose reliability is deemed of paramount technological importance for the commercial success of UAV cellular communications. Through a realistic side-by-side comparison of two network deployments -- a present-day cellular infrastructure versus a next-generation massive MIMO system -- a plurality of ke…
Providing connectivity to unmanned aerial vehicle-user equipments such as drones or flying taxis is a major challenge for tomorrow cellular systems. In this paper, the use of coordinated multi-point transmission for providing seamless connectivity to UAV user equipments is investigated. In particular, a network of clustered ground base stations that cooperatively serve a number of UAVUEs is considered. Two scenarios are studied: scenarios with static, hovering UAV user equipments and scenarios with mobile UAV-UEs. Under a maximum ratio transmission, a novel framework is developed and leveraged…
This paper considers an emerging cellular-connected unmanned aerial vehicle (UAV) architecture for surveillance or monitoring applications. We consider a scenario where a cellular-connected aerial user equipment (AUE) periodically transmits in uplink, with a given data rate requirement, while moving along a given trajectory. For efficient spectrum usage, we enable the concurrent uplink transmission of the AUE and a terrestrial user equipment (TUE) by employing power-domain aerial-terrestrial non-orthogonal multiple access (NOMA), while accounting for the AUE's known trajectory. To characterize…
Providing seamless connectivity to unmanned aerial vehicle user equipments (UAV-UEs) is very challenging due to the encountered line-of-sight interference and reduced gains of down-tilted base station (BS) antennas. For instance, as the altitude of UAV-UEs increases, their cell association and handover procedure become driven by the side-lobes of the BS antennas. In this paper, the performance of cellular-connected UAV-UEs is studied under 3D practical antenna configurations. Two scenarios are studied: scenarios with static, hovering UAV- UEs and scenarios with mobile UAV-UEs. For both scenari…
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
Reliable and direct communication between unmanned aerial vehicles (UAVs) could facilitate autonomous flight, collision avoidance, and cooperation in UAV swarms. In this paper, we consider UAV-to-UAV (U2U) communications underlaying a cellular network, where UAV transmit-receive pairs share the same spectrum with the uplink (UL) of cellular ground users (GUEs). We evaluate the performance of this setup through an analytical framework that embraces realistic height-dependent channel models, antenna patterns, and practical power control mechanisms. Our results demonstrate that, although the pres…
Mounting compact and lightweight base stations on unmanned aerial vehicles (UAVs) is a cost-effective and flexible solution to provide seamless coverage on the existing terrestrial networks. While the coverage probability in UAV-assisted cellular networks has been widely investigated, it provides only the first-order statistic of signal-to-interference-plus-noise ratio (SINR). In this paper, to analyze high-order statistics of SINR and characterize the disparity among individual links, we provide a meta distribution (MD)-based analytical framework for UAV-assisted cellular networks, in which t…
In this paper, we study coverage probabilities of the UAV-assisted cellular network modeled by 2-dimension (2D) Poisson point process. The cellular user is assumed to connect to the nearest aerial base station. We derive the explicit expressions for the downlink coverage probability for the Rayleigh fading channel. Furthermore, we explore the behavior of performance when taking the property of air-to-ground channel into consideration. Our analytical and numerical results show that the coverage probability is affected by UAV height, pathloss exponent and UAV density. To maximize the coverage pr…
This paper aims to propose a three-dimensional (3D) point process model that can be employed to generally deploy unmanned aerial vehicles (UAVs) in a large-scale cellular network and tractably analyze the fundamental network-wide performances of the network. The proposed 3D point process is devised based on a 2D homogeneous marked Poisson point process (PPP) in which each point and its random mark uniquely correspond to the projection and the altitude of each point in the 3D point process, respectively. We study some of the important statistical properties of the proposed 3D point process and …
The enabling of safe cellular controlled unmanned aerial vehicle (UAV) beyond visual line of sight is expected to open important future opportunities in the area of transportation, goods delivery, and system monitoring. A key challenge in this area lies in the design of trajectories which, while allowing the completion of the UAV mission, can guarantee reliable cellular connectivity all along the path. Previous approaches in this domain have considered simplistic propagation model assumptions (e.g. Line of Sight based) or more advanced models but with computationally demanding optimized soluti…
The line-of-sight dominant air-ground channels have posed critical interference issues in cellular-connected unmanned aerial vehicle (UAV) communications. In this paper, we propose a new base station (BS) cooperative beamforming (CB) technique for the cellular downlink to mitigate the strong interference caused by the co-channel terrestrial transmissions to the UAV. Besides the conventional CB by cooperatively transmitting the UAV's message, the serving BSs of the UAVs exploit a novel interference transmission scheme to effectively suppress the terrestrial interference to the UAV. Specifically…
In the existing cellular networks, it remains a challenging problem to communicate with and control an unmanned aerial vehicle (UAV) swarm with both high reliability and low latency. Due to the UAV swarm's high working altitude and strong ground-to-air channels, it is generally exposed to multiple ground base stations (GBSs), while the GBSs that are serving ground users (occupied GBSs) can generate strong interference to the UAV swarm. To tackle this issue, we propose a novel two-phase transmission protocol by exploiting cellular plus device-to-device (D2D) communication for the UAV swarm. In …
Cellular networks equipped with mobile edge computing (MEC) servers can be beneficial for unmanned aerial vehicles (UAVs) with limited onboard computation power and battery life-time. In this paper, we compare energy consumption of a UAV connected to cellular MEC servers in various possible scenarios such as onboard/MEC processing or parallel computation. Using detailed 3GPP-based modelings, we provide quantitative understanding of the most energy efficient approach and its relation with communication technologies, computation factors, and mobility parameters. Our findings show that, across th…
In this article, we introduce a new mathematical framework for the analysis and design of UAV corridors in cellular networks, while considering a realistic network deployment, antenna radiation pattern, and propagation channel model. By leveraging quantization theory, we optimize the electrical tilts of existing ground cellular base stations to maximize the coverage of both legacy ground users and UAVs flying along specified aerial routes. Our practical case study shows that the optimized network results in a cell partitioning that significantly differs from the usual hexagonal pattern, and th…
Aerial-ground interference is the main obstacle to achieving high spectral efficiency in cellular networks with both traditional terrestrial users and new unmanned aerial vehicle (UAV) users. Due to their strong line-of-sight (LoS) channels with the ground, UAVs could cause/suffer severe interference to/from a large number of non-associated but co-channel base stations (BSs) in their uplink/downlink communications. In this letter, we propose a new cooperative interference cancellation (CIC) scheme for the UAV's uplink communication to mitigate its strong interference to co-channel BSs, which r…
Unmanned aerial vehicles (UAVs) are powerful Internet-of-Things components to provide sensing and communications in the air due to their advantages in mobility and flexibility. As aerial users, UAVs are envisioned to support various sensing applications in the next generation cellular systems, which have been studied by the Third Generation Partnership Project (3GPP). However, the Quality-of-Services (QoS) of the cellular link between the UAV and the base station may not be guaranteed when UAVs are at the cell edge or experiencing deep fading. In this article, we first introduce the non-cooper…
Enabling high-rate, low-latency and ultra-reliable wireless communications between unmanned aerial vehicles (UAVs) and their associated ground pilots/users is of paramount importance to realize their large-scale usage in the future. To achieve this goal, cellular-connected UAV, whereby UAVs for various applications are integrated into the cellular network as new aerial users, is a promising technology that has drawn significant attention recently. Compared to the conventional cellular communication with terrestrial users, cellular-connected UAV communication possesses substantially different c…
In this paper, we study a cellular-enabled unmanned aerial vehicle (UAV) communication system consisting of one UAV and multiple ground base stations (GBSs). The UAV has a mission of flying from an initial location to a final location, during which it needs to maintain reliable wireless connection with the cellular network by associating with one of the GBSs at each time instant. We aim to minimize the UAV mission completion time by optimizing its trajectory, subject to a quality of connectivity constraint of the GBS-UAV link specified by a minimum received signal-to-noise ratio (SNR) target, …
Ericsson Research（爱立信研究院）；Virginia Tech（弗吉尼亚理工大学）；Beijing University of Posts and Telecommunications（北京邮电大学）
Cellular-connected unmanned aerial vehicles (UAVs) will inevitably be integrated into future cellular networks as new aerial mobile users. Providing cellular connectivity to UAVs will enable a myriad of applications ranging from online video streaming to medical delivery. However, to enable a reliable wireless connectivity for the UAVs as well as a secure operation, various challenges need to be addressed such as interference management, mobility management and handover, cyber-physical attacks, and authentication. In this paper, the goal is to expose the wireless and security challenges that a…
Southeast University（东南大学）；Purple Mountain Laboratories（紫金山实验室）；National University of Singapore（新加坡国立大学）
Cellular-connected unmanned aerial vehicle (UAV) is a promising technology to unlock the full potential of UAVs in the future. However, how to achieve ubiquitous three-dimensional (3D) communication coverage for the UAVs in the sky is a new challenge. In this paper, we tackle this challenge by a new coverage-aware navigation approach, which exploits the UAV's controllable mobility to design its navigation/trajectory to avoid the cellular BSs' coverage holes while accomplishing their missions. We formulate an UAV trajectory optimization problem to minimize the weighted sum of its mission comple…
This paper studies a new mobile edge computing (MEC) setup where an unmanned aerial vehicle (UAV) is served by cellular ground base stations (GBSs) for computation offloading. The UAV flies between a give pair of initial and final locations, during which it needs to accomplish certain computation tasks by offloading them to some selected GBSs along its trajectory for parallel execution. Under this setup, we aim to minimize the UAV's mission completion time by optimizing its trajectory jointly with the computation offloading scheduling, subject to the maximum speed constraint of the UAV, and th…
In this paper, a novel framework for delay-optimal cell association in unmanned aerial vehicle (UAV)-enabled cellular networks is proposed. In particular, to minimize the average network delay under any arbitrary spatial distribution of the ground users, the optimal cell partitions of UAVs and terrestrial base stations (BSs) are determined. To this end, using the powerful mathematical tools of optimal transport theory, the existence of the solution to the optimal cell association problem is proved and the solution space is completely characterized. The analytical and simulation results show th…
The past few years have witnessed a tremendous increase on the use of unmanned aerial vehicles (UAVs) in civilian applications, which call for high-performance communication between UAVs and their ground clients, especially when they are densely deployed. To achieve this goal, cellular base stations (BSs) can be leveraged to provide a new and promising solution to support massive UAV communications simultaneously in a cost-effective way. However, different from terrestrial communication channels, UAV-to-BS channels are usually dominated by the light-of-sight (LoS) link, which aggravates the co…
This paper advocates a pair of strategies in non-orthogonal multiple access (NOMA) in unmanned aerial vehicles (UAVs) communications, where multiple UAVs play as new aerial communications platforms for serving terrestrial NOMA users. A new multiple UAVs framework with invoking stochastic geometry technique is proposed, in which a pair of practical strategies are considered: 1) the UAV-centric strategy for offloading actions and 2) the user-centric strategy for providing emergency communications. In order to provide practical insights for the proposed NOMA assisted UAV framework, an imperfect s…
Unmanned aerial vehicles (UAVs) have recently found abundant applications in the public and civil domains. To ensure reliable control and navigation, connecting UAVs to controllers via existing cellular network infrastructure, i.e., ground base stations (GBSs), has been proposed as a promising solution. Nevertheless, it is highly challenging to characterize the communication performance of cellular-connected UAVs, due to their unique propagation conditions. This paper proposes a tractable framework for the coverage analysis of cellular-connected UAV networks, which consists of a new blockage m…
To support large-scale deployment of unmanned aerial vehicles (UAVs) in future, a new wireless communication paradigm, namely, cellular-connected UAV, has recently received an upsurge of interests in both academia and industry. Specifically, cellular base stations (BSs) and spectrum are reused to serve UAVs as new aerial user equipments (UEs) for meeting their communication requirements. However, compared to traditional terrestrial UEs, the high altitude of UAVs results in more frequent line-of-sight (LoS) channels with both their associated and non-associated BSs in a much wider area, which c…
In this paper, we consider unmanned aerial vehicles (UAVs) assisted cellular communication system, where UAVs can be used as amplify-and-forward (AF) relays. The effective channel with UAV assisted communication can be modeled as a Rayleigh product-channel, and we derive a tight lower-bound of the ergodic capacity in closed-form. With the obtained lower-bound, trade-offs between the transmit power and the equipped number of antennas of the UAVs can be analyzed. Alternatively, for a giving setting of users and the base-transceiver station (BTS), the needed transmit power and number of antennas …
For reliable and efficient communications of aerial platforms, such as unmanned aerial vehicles (UAVs), the cellular network is envisioned to provide connectivity for the aerial and ground user equipment (GUE) simultaneously, which brings challenges to the existing pattern of the base station (BS) tailored for ground-level services. Thus, we focus on the coverage probability analysis to investigate the coexistence of aerial and terrestrial users, by employing realistic antenna and channel models reported in the 3rd Generation Partnership Project (3GPP). The homogeneous Poisson point process (P…
Massive multiple-input multiple-output (MIMO) is a promising technology for enabling cellular-connected unmanned aerial vehicle (UAV) communications in the future. Equipped with full-dimensional large arrays, ground base stations (GBSs) can apply adaptive fine-grained three-dimensional (3D) beamforming to mitigate the strong interference between high-altitude UAVs and low-altitude terrestrial users, thus significantly enhancing the network spectral efficiency. However, the performance gain of massive MIMO critically depends on the accurate channel state information (CSI) of both UAVs and terre…
To support high data rate urgent or ad hoc communications, we consider mmWave UAV cellular networks and the associated challenges and solutions. To enable fast beamforming training and tracking, we first investigate a hierarchical structure of beamforming codebooks and design of hierarchical codebooks with different beam widths via the sub-array techniques. We next examine the Doppler effect as a result of UAV movement and find that the Doppler effect may not be catastrophic when high gain directional transmission is used. We further explore the use of millimeter wave spatial division multiple…
The line-of-sight (LoS) air-to-ground channel brings both opportunities and challenges in cellular-connected unmanned aerial vehicle (UAV) communications. On one hand, the LoS channels make more cellular base stations (BSs) visible to a UAV as compared to the ground users, which leads to a higher macro-diversity gain for UAV-BS communications. On the other hand, they also render the UAV to impose/suffer more severe uplink/downlink interference to/from the BSs, thus requiring more sophisticated inter-cell interference coordination (ICIC) techniques with more BSs involved. In this paper, we cons…
In this paper, a novel machine learning (ML) framework is proposed for enabling a predictive, efficient deployment of unmanned aerial vehicles (UAVs), acting as aerial base stations (BSs), to provide on-demand wireless service to cellular users. In order to have a comprehensive analysis of cellular traffic, an ML framework based on a Gaussian mixture model (GMM) and a weighted expectation maximization (WEM) algorithm is introduced to predict the potential network congestion. Then, the optimal deployment of UAVs is studied to minimize the transmit power needed to satisfy the communication deman…
In this article, we provide a much-needed study of UAV cellular communications, focusing on the rates achievable for the UAV downlink command and control (C&C) channel. For this key performance indicator, we perform a realistic comparison between existing deployments operating in single-user mode and next-generation multi-user massive MIMO systems. We find that in single-user deployments under heavy data traffic, UAVs flying at 50 m, 150 m, and 300 m achieve the C&C target rate of 100 kbps -- as set by the 3GPP -- in a mere 35%, 2%, and 1% of the cases, respectively. Owing to mitigated interfe…
Aerial-ground interference mitigation is a challenging issue in the cellular-connected unmanned aerial vehicle (UAV) communications. Due to the strong line-of-sight (LoS) air-to-ground (A2G) channels, the UAV may impose/suffer more severe uplink/downlink interference to/from the cellular base stations (BSs) than the ground users. To tackle this challenge, we propose to apply the non-orthogonal multiple access (NOMA) technique to the uplink communication from a UAV to cellular BSs, under spectrum sharing with the existing ground users. However, for our considered system, traditional NOMA with l…
In this paper, a cellular-connected unmanned aerial vehicles (UAV) mobile edge computing system is studied in which the multiple UAVs are served by terrestrial base station (TBS) for computation task offloading. Our goal is to minimize the total UAVs energy consumption, including propulsion energy, computation energy and communication energy, while ensuring that the total number of bits of UAVs are completely computed. For tackling the large amount of bits for computation, we propose a resource partitioning strategy where one portion of tasks is migrated to TBS for computation and the other po…
The use of unmanned aerial vehicles (UAVs) operating as aerial base stations (BSs) has emerged as a promising solution especially in scenarios requiring rapid deployments (e.g., in the cases of crowded hotspots, sporting events, emergencies, natural disasters) in order to assist the ground BSs. In this paper, an analytical framework is provided to analyze the signal-to-interference-plus-noise ratio (SINR) coverage probability of unmanned aerial vehicle (UAV) assisted cellular networks with clustered user equipments (UEs). Locations of UAVs and ground BSs are modeled as Poison point processes (…
A cellular-connected unmanned aerial vehicle (UAV)faces several key challenges concerning connectivity and energy efficiency. Through a learning-based strategy, we propose a general novel multi-armed bandit (MAB) algorithm to reduce disconnectivity time, handover rate, and energy consumption of UAV by taking into account its time of task completion. By formulating the problem as a function of UAV's velocity, we show how each of these performance indicators (PIs) is improved by adopting a proper range of corresponding learning parameter, e.g. 50% reduction in HO rate as compared to a blind stra…
Airborne base stations (carried by drones) have a great potential to enhance coverage and capacity of cellular networks. Multiple scenarios and use cases will highly benefit from such technology such as (i) offloading terrestrial base stations (BSs) in dense and urban areas, and (ii) providing coverage for rural areas. However, one of the main challenges facing the deployment of airborne BSs is the limited available energy at the drone, which limits the flight time. In fact, most of the currently used unmanned aerial vehicles (UAVs) can only operate for one hour maximum. This limits the perfor…
Recently, as a consequence of the COVID-19 pandemic, dependence on telecommunication for remote working and telemedicine has significantly increased. In cellular networks, incorporation of Unmanned Aerial Vehicles (UAVs) can result in enhanced connectivity for outdoor users due to the high probability of establishing Line of Sight (LoS) links. The UAV's limited battery life and its signal attenuation in indoor areas, however, make it inefficient to manage users' requests in indoor environments. Referred to as the Cluster centric and Coded UAV-aided Femtocaching (CCUF) framework, the network's …
In this paper, the problem of trajectory design of unmanned aerial vehicles (UAVs) for maximizing the number of satisfied users is studied in a UAV based cellular network where the UAV works as a flying base station that serves users, and the user indicates its satisfaction in terms of completion of its data request within an allowable maximum waiting time. The trajectory design is formulated as an optimization problem whose goal is to maximize the number of satisfied users. To solve this problem, a machine learning framework based on double Q-learning algorithm is proposed. The algorithm enab…
In conventional terrestrial cellular networks, mobile terminals (MTs) at the cell edge often pose a performance bottleneck due to their long distances from the serving ground base station (GBS), especially in hotspot period when the GBS is heavily loaded. This paper proposes a new hybrid network architecture by leveraging the use of unmanned aerial vehicle (UAV) as an aerial mobile base station, which flies cyclically along the cell edge to offload data traffic for cell-edge MTs. We aim to maximize the minimum throughput of all MTs by jointly optimizing the UAV's trajectory, bandwidth allocati…
What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cel…
In this paper, we consider a cellular-connected unmanned aerial vehicle (UAV) with an information collection and transmission mission for multiple ground targets. Specifically, the UAV is required to collect a fixed amount of information of each target by hovering at a pre-determined location (via e.g., photography/videography/sensing), and transmit all the collected information to the cellular network during its flight. We aim to jointly optimize the UAV's trajectory and the information collection order of the ground targets to minimize the mission completion time. The formulated problem is N…
Unmanned aerial vehicles (UAVs) have brought a lot of flexibility in the network deployment. However, UAVs suffer from the high mobility and instability. To improve the capacity and reliability of the UAV networks, millimeter-wave (mmWave) and reconfigurable intelligent surfaces (RISs) can be used in the system. In this paper, we consider an RIS-assisted mmWave UAV wireless cellular network, where UAVs serve several users with the help of multiple RISs. We jointly optimize the deployment, user scheduling, beamforming vector, and RIS phases to maximize the sum-rate, with the constraints of the …
Unmanned aerial vehicles (UAVs) are expected to be an important new class of users in the fifth generation (5G) and beyond 5G cellular networks. In particular, there are emerging UAV applications such as aerial photograph and data relaying that require high-speed communications between the UAVs and the ground base stations (GBSs). Due to the high UAV altitude, the strong line-of-sight (LoS) links generally dominate the channels between the UAVs and GBSs, which brings both opportunities and challenges in the design of future wireless networks supporting both terrestrial and aerial users. Althou…
