The pervasiveness of the wireless cellular network can be a key enabler for the deployment of autonomous unmanned aerial vehicles (UAVs) in beyond visual line of sight scenarios without human control. However, traditional cellular networks are optimized for ground user equipment (GUE) such as smartphones which makes providing connectivity to flying UAVs very challenging. Moreover, ensuring better connectivity to a moving cellular-connected UAV is notoriously difficult due to the complex air-to-ground path loss model. In this paper, a novel mechanism is proposed to ensure robust wireless connectivity and mobility support for cellular-connected UAVs by tuning the downtilt (DT) angles of all the GBSs. By leveraging tools from reinforcement learning (RL), DT angles are dynamically adjusted by using a model-free RL algorithm. The goal is to provide efficient mobility support in the sky by maximizing the received signal quality at the UAV while also maintaining good throughput performance of the ground users. Simulation results show that the proposed RL-based mobility management (MM) technique can reduce the number of handovers while maintaining the performance goals, compared to the baseline MM scheme in which the network always keeps the DT angle fixed.
Unmanned aerial vehicles (UAVs) can be powerful Internet-of-Things components to execute sensing tasks over the next-generation cellular networks, which are generally referred to as the cellular Internet of UAVs. However, due to the high mobility of UAVs and the shadowing in the air-to-ground channels, UAVs operate in an environment with dynamics and uncertainties. Therefore, UAVs need to improve the quality of service (QoS) of sensing and communication without complete information, which makes reinforcement learning suitable to be employed in the cellular Internet of UAVs. In this article, we…
Cellular-connected unmanned aerial vehicles (UAVs) are expected to play a major role in various civilian and commercial applications in the future. While existing cellular networks can provide wireless coverage to UAV user equipment (UE), such legacy networks are optimized for ground users which makes it challenging to provide reliable connectivity to aerial UEs. To ensure reliable and effective mobility management for aerial UEs, estimating the velocity of cellular-connected UAVs carries critical importance. In this paper, we introduce an approximate probability mass function (PMF) of handove…
By using wireless connectivity through cellular base stations (BSs), swarms of unmanned aerial vehicles (UAVs) can provide a plethora of services ranging from delivery of goods to surveillance. In particular, UAVs in a swarm can utilize wireless communications to collect information, like velocity and heading angle, from surrounding UAVs for coordinating their operations and maintaining target speed and intra-UAV distance. However, due to the uncertainty of the wireless channel, wireless communications among UAVs will experience a transmission delay which can impair the swarm's ability to stab…
The usage of beamforming in Unmanned Aerial Vehicles (UAVs) has the potential of significantly improving the air-to-ground link quality. This paper presents the outcome of experimental trial of such a UAV-based beamforming system over live cellular networks. A testbed with directional antennas has been built for the experiments. It is shown that beamforming can extend the signal coverage due to antenna gain, as well as spatially reduce interference leading to higher signal quality. Moreover, it has a positive impact on the mobility performance of a flying UAV by reducing handover occurrences. …
Up until now, path planning for unmanned aerial vehicles (UAVs) has mainly been focused on the optimisation towards energy efficiency. However, to operate UAVs safely, wireless coverage is of utmost importance. Currently, deployed cellular networks often exhibit an inadequate performance for aerial users due to high amounts of intercell interference. Furthermore, taking the never-ending trend of densification into account, the level of interference experienced by UAVs will only increase in the future. For the purpose of UAV trajectory planning, wireless coverage should be taken into account to…
To integrate unmanned aerial vehicles (UAVs) in future large-scale deployments, a new wireless communication paradigm, namely, the cellular-connected UAV has recently attracted interest. However, the line-of-sight dominant air-to-ground channels along with the antenna pattern of the cellular ground base stations (GBSs) introduce critical interference issues in cellular-connected UAV communications. In particular, the complex antenna pattern and the ground reflection (GR) from the down-tilted antennas create both coverage holes and patchy coverage for the UAVs in the sky, which leads to unrelia…
Providing connectivity to aerial users, such as cellular-connected unmanned aerial vehicles (UAVs) or flying taxis, is a key challenge for tomorrow's cellular systems. In this paper, the use of coordinated multi-point (CoMP) transmission along with caching for providing seamless connectivity to aerial users is investigated. In particular, a network of clustered cache-enabled small base stations (SBSs) serving aerial users is considered in which a requested content by an aerial user is cooperatively transmitted from collaborative ground SBSs. For this network, a novel upper bound expression on …
An integrated access and backhaul (IAB) network architecture can enable flexible and fast deployment of next-generation cellular networks. However, mutual interference between access and backhaul links, small inter-site distance and spatial dynamics of user distribution pose major challenges in the practical deployment of IAB networks. To tackle these problems, we leverage the flying capabilities of unmanned aerial vehicles (UAVs) as hovering IAB-nodes and propose an interference management algorithm to maximize the overall sum rate of the IAB network. In particular, we jointly optimize the us…
We present a flexible family of 3D mobility models suitable for unmanned aerial vehicles (UAV). Based on stochastic differential equations, the models offer a unique property of explicitly incorporating the mobility control mechanism and environmental perturbation, while enabling tractable steady state solutions for properties such as position and connectivity. Specifically, motivated by UAV flight data, for a symmetric mobility model with an arbitrary control mechanism, we derive the steady state distribution of the distance from the target position. We provide closed form expressions for the…
Intelligent reflective surfaces (IRSs) capable of reconfiguring their electromagnetic absorption and reflection properties in real-time are offering unprecedented opportunities to enhance wireless communication experience in challenging environments. In this paper, we analyze the potential of IRS in enhancing cellular communications for UAVs, which currently suffers from poor signal strength due to the down-tilt of base station antennas optimized to serve ground users. We consider deployment of IRS on building walls, which can be remotely configured by cellular base stations to coherently dire…
To ensure reliable and effective mobility management for aerial user equipment (UE), estimating the speed of cellular-connected unmanned aerial vehicles (UAVs) carries critical importance since this can help to improve the quality of service of the cellular network. The 3GPP LTE standard uses the number of handovers made by a UE during a predefined time period to estimate the speed and the mobility state efficiently. In this paper, we introduce an approximation to the probability mass function of handover count (HOC) as a function of a cellular-connected UAV's height and velocity, HOC measurem…
As an emerging field of aerial robotics, Unmanned Aerial Vehicles (UAVs) have gained significant research interest within the wireless networking research community. As soon as national legislations allow UAVs to fly autonomously, we will see swarms of UAV populating the sky of our smart cities to accomplish different missions: parcel delivery, infrastructure monitoring, event filming, surveillance, tracking, etc. The UAV ecosystem can benefit from existing 5G/B5G cellular networks, which can be exploited in different ways to enhance UAV communications. Because of the inherent characteristics …
Unmanned aerial vehicles (UAVs) are the emerging vital components of millimeter wave (mmWave) wireless systems. Accurate beam alignment is essential for efficient beam-based mmWave communications of UAVs with base stations (BSs). Conventional beam sweeping approaches often have large overhead due to the high mobility and autonomous operation of UAVs. Learning-based approaches greatly reduce the overhead by leveraging UAV data, like position to identify optimal beam directions. In this paper, we propose a reinforcement learning (RL)-based framework for UAV-BS beam alignment using deep Q-Network…
Recently, the unmanned aerial vehicles (UAVs) have been widely used in real-time sensing applications over cellular networks, which sense the conditions of the tasks and transmit the real-time sensory data to the base station (BS). The performance of a UAV is determined by the performance of both its sensing and transmission processes, which are influenced by the trajectory of the UAV. However, it is challenging for UAVs to design their trajectories efficiently, since they work in a dynamic environment. To tackle this challenge, in this paper, we adopt the reinforcement learning framework to s…
Cellular networks are expected to be the main communication infrastructure to support the expanding applications of Unmanned Aerial Vehicles (UAVs). As these networks are deployed to serve ground User Equipment (UES), several issues need to be addressed to enhance cellular UAVs'services.In this paper, we propose a realistic communication model on the downlink,and we show that the Quality of Service (QoS)for the users is affected by the number of interfering BSs and the impact they cause. The joint problem of sub-carrier and power allocation is therefore addressed. Given its complexity, which i…
Cellular network-connected unmanned aerial vehicles (UAVs) experience different radio propagation conditions than radio nodes on the ground. Therefore, it has become critical to investigate the performance of aerial radios, both theoretically and through field trials. In this paper, we consider low-altitude aerial nodes that are served by an experimental cellular network. We provide a detailed description of the hardware and software components needed for establishing a broadband wireless testbed for UAV communications research using software radios. Results show that a testbed for innovation …
Trinity College Dublin（都柏林圣三一学院）；Virginia Tech（弗吉尼亚理工大学）
Providing reliable connectivity to cellular-connected UAV can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs. On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a RL algorithm to dynamically optimise the height of a UAV as it moves through the environment, with the goal of increasing the throughput or sp…
To prolong the lifetime of the unmanned aerial vehicles (UAVs), the UAVs need to fulfill their missions in the shortest possible time. In addition to this requirement, in many applications, the UAVs require a reliable internet connection during their flights. In this paper, we minimize the travel time of the UAVs, ensuring that a probabilistic connectivity constraint is satisfied. To solve this problem, we need a global model of the outage probability in the environment. Since the UAVs have different missions and fly over different areas, their collected data carry local information on the net…
Integrating unmanned aerial vehicles (UAVs) into existing cellular networks encounters lots of challenges, among which one of the most striking concerns is how to achieve harmonious coexistence of aerial transceivers, inter alia, UAVs, and terrestrial user equipments (UEs). In this paper, a cellular-connected UAV network is focused, where multiple UAVs receive messages from base stations (BSs) in the down-link, while BSs are serving ground UEs in their cells. For effectively managing inter-cell interferences (ICIs) among UEs due to intense reuse of time-frequency resource block (RB) resource, …
Supporting reliable and seamless mobility for aerial users, such as unmanned aerial vehicles (UAVs), is a key challenge for the next-generation cellular systems. To tackle this challenge, we propose a joint beamforming, user association, and UAV-height control framework for cellular-connected multi-UAV networks with multiple antenna base stations (BSs). With the aim of maximizing the minimum achievable rate for UAVs subject to co-existed terrestrial user equipment's rate constraints, we devise a hierarchical bi-layer iterative algorithm to optimize BSs' beamforming vectors, UAV association mat…
Powered by the advances in microelectronics technologies, unmanned aerial vehicles (UAVs) provide a vast variety of services ranging from surveillance to delivery in both military and civilian domains. It is clear that a successful operation in those services relies heavily on wireless communication technologies. Even though wireless communication techniques could be considered to reach a certain level of maturity, wireless communication links including UAVs should be regarded in a different way due to the peculiar characteristics of UAVs such as agility in 3D spatial domain and versatility in…
Cellular-connected unmanned aerial vehicles (UAVs) are recently getting significant attention due to various practical use cases, e.g., surveillance, data gathering, purchase delivery, among other applications. Since UAVs are low power nodes, energy and spectral efficient communication is of paramount importance. To that end, multiple access (MA) schemes can play an important role in achieving high energy efficiency and spectral efficiency. In this work, we introduce rate-splitting MA (RSMA) and non-orthogonal MA (NOMA) schemes in a cellular-connected UAV network. In particular, we investigate…
In this paper, we consider the cellular Internet of unmanned aerial vehicles (UAVs), where UAVs sense data for multiple tasks and transmit the data to the base station (BS). To quantify the "freshness" of the data at the BS, we bring in the concept of the age of information (AoI). The AoI is determined by the time for UAV sensing and that for UAV transmission, and gives rise to a trade-off within a given period. To minimize the AoI, we formulate a joint sensing time, transmission time, UAV trajectory, and task scheduling optimization problem. To solve this problem, we first propose an iterativ…
In the current unmanned aircraft systems (UASs) for sensing services, unmanned aerial vehicles (UAVs) transmit their sensory data to terrestrial mobile devices over the unlicensed spectrum. However, the interference from surrounding terminals is uncontrollable due to the opportunistic channel access. In this paper, we consider a cellular Internet of UAVs to guarantee the Quality-of-Service (QoS), where the sensory data can be transmitted to the mobile devices either by UAV-to-Device (U2D) communications over cellular networks, or directly through the base station (BS). Since UAVs' sensing and …
Supporting reliable and seamless wireless connectivity for unmanned aerial vehicles (UAVs) has recently become a critical requirement to enable various different use cases of UAVs. Due to their widespread deployment footprint, cellular networks can support beyond visual line of sight (BVLOS) communications for UAVs. In this paper, we consider cellular connected UAVs (C-UAVs) that are served by massive multiple-input-multiple-output (MIMO) links to extend coverage range, while also improving physical layer security and authentication. We consider Rician channel and propose a novel linear precod…
The next generation of wireless communication systems will integrate terrestrial and non-terrestrial networks targeting to cover the undercovered regions, especially connecting the marine activities. Unmanned aerial vehicles (UAVs) based connectivity solutions offer significant advances to support the conventional terrestrial networks. However, the use of UAVs for maritime communication is still an unexplored area of research. Therefore, this paper highlights different aspects of UAV-based maritime communication, including the basic architecture, various channel characteristics, and use cases.…
Due to the advantages of flexible deployment and extensive coverage, unmanned aerial vehicles (UAVs) have great potential for sensing applications in the next generation of cellular networks, which will give rise to a cellular Internet of UAVs. In this paper, we consider a cellular Internet of UAVs, where the UAVs execute sensing tasks through cooperative sensing and transmission to minimize the age of information (AoI). However, the cooperative sensing and transmission is tightly coupled with the UAVs' trajectories, which makes the trajectory design challenging. To tackle this challenge, we p…
The mushroom growth of cellular users requires novel advancements in the existing cellular infrastructure. One way to handle such a tremendous increase is to densely deploy terrestrial small-cell base stations (TSBSs) with careful management of smart backhaul/fronthaul networks. Nevertheless, terrestrial backhaul hubs significantly suffer from the dense fading environment and are difficult to install in a typical urban environment. Therefore, this paper considers the idea of replacing terrestrial backhaul network with an aerial network consisting of unmanned aerial vehicles (UAVs) to provide t…
Localization plays a key role for safe operation of UAVs enabling beyond visual line of sight applications. Compared to GPS based localization, cellular networks can reduce the positioning error and cost since cellular connectivity is becoming a prominent solution as a communication system for UAVs. As a first step towards localization, UAV needs to receive sufficient number of localization signals each having a signal to interference plus noise ratio (SINR) greater than a threshold, which is defined as localizability. On the other hand, three-dimensional mobility of UAVs, altitude dependent c…
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
This letter proposes an analytical framework to evaluate the coverage performance of a cellular-connected unmanned aerial vehicle (UAV) network in which UAV user equipments (UAV-UEs) are equipped with directional antennas and move according to a three-dimensional (3D) mobility model. The ground base stations (GBSs) equipped with practical down-tilted antennas are distributed according to a Poisson point process (PPP). With tools from stochastic geometry, we derive the handover probability and coverage probability of a random UAV-UE under the strongest average received signal strength (RSS) ass…
Unmanned Aerial Vehicles (UAVs) promise to become an intrinsic part of next generation communications, as they can be deployed to provide wireless connectivity to ground users to supplement existing terrestrial networks. The majority of the existing research into the use of UAV access points for cellular coverage considers rotary-wing UAV designs (i.e. quadcopters). However, we expect fixed-wing UAVs to be more appropriate for connectivity purposes in scenarios where long flight times are necessary (such as for rural coverage), as fixed-wing UAVs rely on a more energy-efficient form of flight …
In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through …
In this paper, a novel machine learning (ML) framework is proposed for enabling a predictive, efficient deployment of unmanned aerial vehicles (UAVs), acting as aerial base stations (BSs), to provide on-demand wireless service to cellular users. In order to have a comprehensive analysis of cellular traffic, an ML framework based on a Gaussian mixture model (GMM) and a weighted expectation maximization (WEM) algorithm is introduced to predict the potential network congestion. Then, the optimal deployment of UAVs is studied to minimize the transmit power needed to satisfy the communication deman…
In this paper, we propose a novel joint intelligent trajectory design and resource allocation algorithm based on user's mobility and their requested services for unmanned aerial vehicles (UAVs) assisted networks, where UAVs act as nodes of a network function virtualization (NFV) enabled network. Our objective is to maximize energy efficiency and minimize the average delay on all services by allocating the limited radio and NFV resources. In addition, due to the traffic conditions and mobility of users, we let some Virtual Network Functions (VNFs) to migrate from their current locations to othe…
Mobility management is the key feature of cellular networks. When integrating unmanned aerial vehicles (UAVs) into cellular networks, their cell association needs to be carefully managed for coexistence with other cellular users. UAVs move in three dimensions and may traverse several cells on their flight path, and so may be subject to several handovers. In order to enable research on mobility management with UAV users, this paper describes the design, implementation, and testing methodology for handover experiments with aerial users. We leverage software-defined radios (SDRs) and implement a …
Providing connectivity to unmanned aerial vehicle-user equipments such as drones or flying taxis is a major challenge for tomorrow cellular systems. In this paper, the use of coordinated multi-point transmission for providing seamless connectivity to UAV user equipments is investigated. In particular, a network of clustered ground base stations that cooperatively serve a number of UAVUEs is considered. Two scenarios are studied: scenarios with static, hovering UAV user equipments and scenarios with mobile UAV-UEs. Under a maximum ratio transmission, a novel framework is developed and leveraged…
In this paper, we consider an Internet of unmanned aerial vehicles (UAVs) over cellular networks, where UAVs work as aerial users to collect various sensory data, and send the collected data to their transmission destinations over cellular links. Unlike the terrestrial users in the conventional cellular networks, different UAVs have various communication requirements due to their sensing applications, and a more flexible communication framework is in demand. To tackle this problem, we propose a UAV-to-Everything (U2X) networking, which enables the UAVs to adjust their communication modes full …
Unmanned Aerial Vehicles (UAVs) have attracted considerable research interest recently. Especially when it comes to the realm of Internet of Things, the UAVs with Internet connectivity are one of the main demands. Furthermore, the energy constraint i.e. battery limit is a bottle-neck of the UAVs that can limit their applications. We try to address and solve the energy problem. Therefore, a path planning method for a cellular-connected UAV is proposed that will enable the UAV to plan its path in an area much larger than its battery range by getting recharged in certain positions equipped with p…
Unmanned aerial vehicles (UAVs) can provide an effective solution for improving the coverage, capacity, and the overall performance of terrestrial wireless cellular networks. In particular, UAV-assisted cellular networks can meet the stringent performance requirements of the fifth generation new radio (5G NR) applications. In this paper, the problem of energy-efficient resource allocation in UAV-assisted cellular networks is studied under the reliability and latency constraints of 5G NR applications. The framework of ruin theory is employed to allow solar-powered UAVs to capture the dynamics o…
King’s College London（伦敦国王学院）；Ericsson Inc.（爱立信公司）
Cellular-connected unmanned aerial vehicle (UAV) swarm is a promising solution for diverse applications, including cargo delivery and traffic control. However, it is still challenging to communicate with and control the UAV swarm with high reliability, low latency, and high energy efficiency. In this paper, we propose a two-phase command and control (C&C) transmission scheme in a cellular-connected UAV swarm network, where the ground base station (GBS) broadcasts the common C&C message in Phase I. In Phase II, the UAVs that have successfully decoded the C&C message will relay the message to th…
Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular ne…
A Unified Framework for Joint Mobility Prediction and Object Profiling of Drones in UAV Networks
School of Informatics, Computing and Cyber Systems, Northern Arizona University, Flagstaff, AZ（信息学、计算与网络系统学院，北亚利桑那大学，弗拉格斯塔，亚利桑那）；Air Force Research Laboratory, Rome, NY（空军研究实验室，罗马，纽约）
In this paper, we jointly consider the downlink simultaneous wireless information and power transfer (SWIPT) and uplink information transmission in unmanned aerial vehicle (UAV)-assisted millimeter wave (mmWave) cellular networks, in which the user equipment (UE) locations are modeled using Poisson cluster processes (e.g., Thomas cluster processes or Matérn cluster processes). Distinguishing features of mmWave communications, such as different path loss models for line-of-sight (LOS) and non-LOS (NLOS) links and directional transmissions are taken into account. In the downlink phase, the assoc…
Due to the decrease in cost, size and weight, \acp{UAV} are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to \acp{UAV} both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this paper, an approach to the air-to-ground channel characterization for low-height \acp{UAV} based on an extensive measurement campaign is proposed, giving special attention to the comparison of the results when a typical directional antenna for network deployme…
Cellular systems are vulnerable to jamming attacks, especially smart jammers that choose their jamming policies such as the jamming channel frequencies and power based on the ongoing communication policies and network states. In this article, we present an unmanned aerial vehicle (UAV) aided cellular communication framework against jamming. In this scheme, UAVs use reinforcement learning methods to choose the relay policy for mobile users in cellular systems, if the serving base station is heavily jammed. More specifically, we propose a deep reinforcement learning based UAV relay scheme to hel…
By utilizing the combination of two powerful tools i.e., stochastic geometry (SG) and evolutionary game theory (EGT), in this paper, we study the problem of mobile user (MU) mode selection in heterogeneous sub-$6$ GHz/millimeter wave (mmWave) cellular networks. Particularly, by using SG tools, we first propose an analytical framework to assess the performance of the considered networks in terms of average signal-to-interference-plus-noise (SINR) ratio, average rate, and mobility-induced time overhead, for scenarios with user mobility{.} According to the SG-based framework, an EGT-based approac…
Airborne base stations (carried by drones) have a great potential to enhance coverage and capacity of cellular networks. Multiple scenarios and use cases will highly benefit from such technology such as (i) offloading terrestrial base stations (BSs) in dense and urban areas, and (ii) providing coverage for rural areas. However, one of the main challenges facing the deployment of airborne BSs is the limited available energy at the drone, which limits the flight time. In fact, most of the currently used unmanned aerial vehicles (UAVs) can only operate for one hour maximum. This limits the perfor…
In the existing cellular networks, it remains a challenging problem to communicate with and control an unmanned aerial vehicle (UAV) swarm with both high reliability and low latency. Due to the UAV swarm's high working altitude and strong ground-to-air channels, it is generally exposed to multiple ground base stations (GBSs), while the GBSs that are serving ground users (occupied GBSs) can generate strong interference to the UAV swarm. To tackle this issue, we propose a novel two-phase transmission protocol by exploiting cellular plus device-to-device (D2D) communication for the UAV swarm. In …
This paper aims to propose a three-dimensional (3D) point process model that can be employed to generally deploy unmanned aerial vehicles (UAVs) in a large-scale cellular network and tractably analyze the fundamental network-wide performances of the network. The proposed 3D point process is devised based on a 2D homogeneous marked Poisson point process (PPP) in which each point and its random mark uniquely correspond to the projection and the altitude of each point in the 3D point process, respectively. We study some of the important statistical properties of the proposed 3D point process and …
A reconfigurable intelligent surface (RIS) is a metamaterial that can be integrated into walls and influence the propagation of electromagnetic waves. This, typically passive radio frequency (RF) technology is emerging for indoor and outdoor use with the potential of making wireless communications more reliable in increasingly challenging radio environments. This paper goes one step further and introduces mobile RIS, specifically, RIS carried by unmanned aerial vehicles (UAVs) to support cellular communications networks and services of the future. We elaborate on several use cases, challenges,…
Mounting compact and lightweight base stations on unmanned aerial vehicles (UAVs) is a cost-effective and flexible solution to provide seamless coverage on the existing terrestrial networks. While the coverage probability in UAV-assisted cellular networks has been widely investigated, it provides only the first-order statistic of signal-to-interference-plus-noise ratio (SINR). In this paper, to analyze high-order statistics of SINR and characterize the disparity among individual links, we provide a meta distribution (MD)-based analytical framework for UAV-assisted cellular networks, in which t…
Recently, as a consequence of the COVID-19 pandemic, dependence on telecommunication for remote working and telemedicine has significantly increased. In cellular networks, incorporation of Unmanned Aerial Vehicles (UAVs) can result in enhanced connectivity for outdoor users due to the high probability of establishing Line of Sight (LoS) links. The UAV's limited battery life and its signal attenuation in indoor areas, however, make it inefficient to manage users' requests in indoor environments. Referred to as the Cluster centric and Coded UAV-aided Femtocaching (CCUF) framework, the network's …
A prevalent theory circulating among the non-scientific community is that the intensive deployment of base stations over the territory significantly increases the level of electromagnetic field (EMF) exposure and affects population health. To alleviate this concern, in this work, we propose a network architecture that introduces tethered unmanned aerial vehicles (TUAVs) carrying green antennas to minimize the EMF exposure while guaranteeing a high data rate for users. In particular, each TUAV can attach itself to one of the possible ground stations at the top of some buildings. The location of…
Unmanned aerial vehicles (UAVs) have found numerous applications and are expected to bring fertile business opportunities in the next decade. Among various enabling technologies for UAVs, wireless communication is essential and has drawn significantly growing attention in recent years. Compared to the conventional terrestrial communications, UAVs' communications face new challenges due to their high altitude above the ground and great flexibility of movement in the three-dimensional (3D) space. Several critical issues arise, including the line-of-sight (LoS) dominant UAV-ground channels and re…
Unmanned aerial vehicles (UAVs) can enhance the performance of cellular networks, due to their high mobility and efficient deployment. In this paper, we present a first study on how the user mobility affects the UAVs' trajectories of a multiple-UAV assisted wireless communication system. Specifically, we consider the UAVs are deployed as aerial base stations to serve ground users who move between different regions. We maximize the throughput of ground users in the downlink communication by optimizing the UAVs' trajectories, while taking into account the impact of the user mobility, propulsion …
