The usage of beamforming in Unmanned Aerial Vehicles (UAVs) has the potential of significantly improving the air-to-ground link quality. This paper presents the outcome of experimental trial of such a UAV-based beamforming system over live cellular networks. A testbed with directional antennas has been built for the experiments. It is shown that beamforming can extend the signal coverage due to antenna gain, as well as spatially reduce interference leading to higher signal quality. Moreover, it has a positive impact on the mobility performance of a flying UAV by reducing handover occurrences. It is also discussed, in which situations beamforming should translate into the uplink throughput gain.
Unmanned aerial vehicles (UAVs) can be powerful Internet-of-Things components to execute sensing tasks over the next-generation cellular networks, which are generally referred to as the cellular Internet of UAVs. However, due to the high mobility of UAVs and the shadowing in the air-to-ground channels, UAVs operate in an environment with dynamics and uncertainties. Therefore, UAVs need to improve the quality of service (QoS) of sensing and communication without complete information, which makes reinforcement learning suitable to be employed in the cellular Internet of UAVs. In this article, we…
Cooperating radios can extend their communication range by adjusting their signals to ensure coherent combining at a destination radio. This technique is called distributed transmit beamforming. Beamforming (BF) relies on the BF radios having frequency synchronized carriers and phases adjusted for coherent combining. Both requirements are typically met by exchanging preambles with the destination. However, since BF aims to increase the communication range, the individually transmitted preambles are typically at low SNR and their lengths are constrained by the channel coherence time. These nois…
Cellular-connected unmanned aerial vehicles (UAVs) are expected to play a major role in various civilian and commercial applications in the future. While existing cellular networks can provide wireless coverage to UAV user equipment (UE), such legacy networks are optimized for ground users which makes it challenging to provide reliable connectivity to aerial UEs. To ensure reliable and effective mobility management for aerial UEs, estimating the velocity of cellular-connected UAVs carries critical importance. In this paper, we introduce an approximate probability mass function (PMF) of handove…
By using wireless connectivity through cellular base stations (BSs), swarms of unmanned aerial vehicles (UAVs) can provide a plethora of services ranging from delivery of goods to surveillance. In particular, UAVs in a swarm can utilize wireless communications to collect information, like velocity and heading angle, from surrounding UAVs for coordinating their operations and maintaining target speed and intra-UAV distance. However, due to the uncertainty of the wireless channel, wireless communications among UAVs will experience a transmission delay which can impair the swarm's ability to stab…
The pervasiveness of the wireless cellular network can be a key enabler for the deployment of autonomous unmanned aerial vehicles (UAVs) in beyond visual line of sight scenarios without human control. However, traditional cellular networks are optimized for ground user equipment (GUE) such as smartphones which makes providing connectivity to flying UAVs very challenging. Moreover, ensuring better connectivity to a moving cellular-connected UAV is notoriously difficult due to the complex air-to-ground path loss model. In this paper, a novel mechanism is proposed to ensure robust wireless connec…
Up until now, path planning for unmanned aerial vehicles (UAVs) has mainly been focused on the optimisation towards energy efficiency. However, to operate UAVs safely, wireless coverage is of utmost importance. Currently, deployed cellular networks often exhibit an inadequate performance for aerial users due to high amounts of intercell interference. Furthermore, taking the never-ending trend of densification into account, the level of interference experienced by UAVs will only increase in the future. For the purpose of UAV trajectory planning, wireless coverage should be taken into account to…
Unmanned aerial vehicles (UAVs) are the emerging vital components of millimeter wave (mmWave) wireless systems. Accurate beam alignment is essential for efficient beam-based mmWave communications of UAVs with base stations (BSs). Conventional beam sweeping approaches often have large overhead due to the high mobility and autonomous operation of UAVs. Learning-based approaches greatly reduce the overhead by leveraging UAV data, like position to identify optimal beam directions. In this paper, we propose a reinforcement learning (RL)-based framework for UAV-BS beam alignment using deep Q-Network…
To integrate unmanned aerial vehicles (UAVs) in future large-scale deployments, a new wireless communication paradigm, namely, the cellular-connected UAV has recently attracted interest. However, the line-of-sight dominant air-to-ground channels along with the antenna pattern of the cellular ground base stations (GBSs) introduce critical interference issues in cellular-connected UAV communications. In particular, the complex antenna pattern and the ground reflection (GR) from the down-tilted antennas create both coverage holes and patchy coverage for the UAVs in the sky, which leads to unrelia…
Reconfigurable intelligent surface (RIS) has been regarded as a revolutionary and promising technology owing to its powerful feature of adaptively shaping wireless propagation environment. However, as a frequency-selective device, the RIS can only effectively provide tunable phase-shifts for signals within a certain frequency band. Thus, base-station (BS)-RIS-user association is an important issue to maximize the efficiency and ability of the RIS in cellular networks. In this paper, we consider a RIS-aided cellular network and aim to maximize the sum-rate of downlink transmissions by designing…
Providing connectivity to aerial users, such as cellular-connected unmanned aerial vehicles (UAVs) or flying taxis, is a key challenge for tomorrow's cellular systems. In this paper, the use of coordinated multi-point (CoMP) transmission along with caching for providing seamless connectivity to aerial users is investigated. In particular, a network of clustered cache-enabled small base stations (SBSs) serving aerial users is considered in which a requested content by an aerial user is cooperatively transmitted from collaborative ground SBSs. For this network, a novel upper bound expression on …
An integrated access and backhaul (IAB) network architecture can enable flexible and fast deployment of next-generation cellular networks. However, mutual interference between access and backhaul links, small inter-site distance and spatial dynamics of user distribution pose major challenges in the practical deployment of IAB networks. To tackle these problems, we leverage the flying capabilities of unmanned aerial vehicles (UAVs) as hovering IAB-nodes and propose an interference management algorithm to maximize the overall sum rate of the IAB network. In particular, we jointly optimize the us…
Supporting reliable and seamless mobility for aerial users, such as unmanned aerial vehicles (UAVs), is a key challenge for the next-generation cellular systems. To tackle this challenge, we propose a joint beamforming, user association, and UAV-height control framework for cellular-connected multi-UAV networks with multiple antenna base stations (BSs). With the aim of maximizing the minimum achievable rate for UAVs subject to co-existed terrestrial user equipment's rate constraints, we devise a hierarchical bi-layer iterative algorithm to optimize BSs' beamforming vectors, UAV association mat…
Intelligent reflective surfaces (IRSs) capable of reconfiguring their electromagnetic absorption and reflection properties in real-time are offering unprecedented opportunities to enhance wireless communication experience in challenging environments. In this paper, we analyze the potential of IRS in enhancing cellular communications for UAVs, which currently suffers from poor signal strength due to the down-tilt of base station antennas optimized to serve ground users. We consider deployment of IRS on building walls, which can be remotely configured by cellular base stations to coherently dire…
As an emerging field of aerial robotics, Unmanned Aerial Vehicles (UAVs) have gained significant research interest within the wireless networking research community. As soon as national legislations allow UAVs to fly autonomously, we will see swarms of UAV populating the sky of our smart cities to accomplish different missions: parcel delivery, infrastructure monitoring, event filming, surveillance, tracking, etc. The UAV ecosystem can benefit from existing 5G/B5G cellular networks, which can be exploited in different ways to enhance UAV communications. Because of the inherent characteristics …
To ensure reliable and effective mobility management for aerial user equipment (UE), estimating the speed of cellular-connected unmanned aerial vehicles (UAVs) carries critical importance since this can help to improve the quality of service of the cellular network. The 3GPP LTE standard uses the number of handovers made by a UE during a predefined time period to estimate the speed and the mobility state efficiently. In this paper, we introduce an approximation to the probability mass function of handover count (HOC) as a function of a cellular-connected UAV's height and velocity, HOC measurem…
Recently, the unmanned aerial vehicles (UAVs) have been widely used in real-time sensing applications over cellular networks, which sense the conditions of the tasks and transmit the real-time sensory data to the base station (BS). The performance of a UAV is determined by the performance of both its sensing and transmission processes, which are influenced by the trajectory of the UAV. However, it is challenging for UAVs to design their trajectories efficiently, since they work in a dynamic environment. To tackle this challenge, in this paper, we adopt the reinforcement learning framework to s…
Cellular networks are expected to be the main communication infrastructure to support the expanding applications of Unmanned Aerial Vehicles (UAVs). As these networks are deployed to serve ground User Equipment (UES), several issues need to be addressed to enhance cellular UAVs'services.In this paper, we propose a realistic communication model on the downlink,and we show that the Quality of Service (QoS)for the users is affected by the number of interfering BSs and the impact they cause. The joint problem of sub-carrier and power allocation is therefore addressed. Given its complexity, which i…
This paper studies the benefits of incorporating underlaid full-duplex (FD) device-to-device (D2D) communications into massive multiple-input-multiple-output (MIMO) downlink systems. Due to the nature of cellular downlink and FD D2D transmission, the performances of cellular and D2D services are severely impaired due to high interference caused by base-stations (BSs) and D2D transceivers. As a consequence, integrating a large number of D2D links into exiting cellular networks might degrade the system performances. To overcome this challenge, utilizing the large uniform linear array (ULA) equip…
Cellular network-connected unmanned aerial vehicles (UAVs) experience different radio propagation conditions than radio nodes on the ground. Therefore, it has become critical to investigate the performance of aerial radios, both theoretically and through field trials. In this paper, we consider low-altitude aerial nodes that are served by an experimental cellular network. We provide a detailed description of the hardware and software components needed for establishing a broadband wireless testbed for UAV communications research using software radios. Results show that a testbed for innovation …
Unmanned aerial vehicles (UAVs) have found widespread commercial, civilian, and military applications. Wireless communication has always been one of the core technologies for UAV. However, the communication capacity is becoming a bottleneck for UAV to support more challenging application scenarios. The heavily-occupied sub-6 GHz frequency band is not sufficient to meet the ultra high-data-traffic requirements. The utilization of the millimeter-wave (mmWave) frequency bands is a promising direction for UAV communications, where large antenna arrays can be packed in a small area on the UAV to pe…
To achieve high data rates defined in 5G, the use of millimeter-waves and massive-MIMO are indispensable. To benefit from these technologies, an accurate estimation of the channel parameters is crucial. We propose a novel two-stage algorithm for channel parameters estimation. In the first stage, coarse estimation is accomplished by applying parameter estimation via interpolation based on DFT grid (PREIDG) with a fixed look-up table (LUT), while the second stage refines the estimates by means of the space-alternating generalized expectation maximization (SAGE) algorithm. The two-stage algorithm…
Trinity College Dublin（都柏林圣三一学院）；Virginia Tech（弗吉尼亚理工大学）
Providing reliable connectivity to cellular-connected UAV can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs. On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a RL algorithm to dynamically optimise the height of a UAV as it moves through the environment, with the goal of increasing the throughput or sp…
To prolong the lifetime of the unmanned aerial vehicles (UAVs), the UAVs need to fulfill their missions in the shortest possible time. In addition to this requirement, in many applications, the UAVs require a reliable internet connection during their flights. In this paper, we minimize the travel time of the UAVs, ensuring that a probabilistic connectivity constraint is satisfied. To solve this problem, we need a global model of the outage probability in the environment. Since the UAVs have different missions and fly over different areas, their collected data carry local information on the net…
Integrating unmanned aerial vehicles (UAVs) into existing cellular networks encounters lots of challenges, among which one of the most striking concerns is how to achieve harmonious coexistence of aerial transceivers, inter alia, UAVs, and terrestrial user equipments (UEs). In this paper, a cellular-connected UAV network is focused, where multiple UAVs receive messages from base stations (BSs) in the down-link, while BSs are serving ground UEs in their cells. For effectively managing inter-cell interferences (ICIs) among UEs due to intense reuse of time-frequency resource block (RB) resource, …
The integration of renewable energy sources (RES) has facilitated efficient and sustainable resource allocation for wireless communication systems. In this paper, a novel framework is introduced to develop coordinated multicell beamforming (CMBF) design for wireless cellular networks powered by a smart microgrid, where the BSs are equipped with RES harvesting devices and can perform two-way (i.e., buying/selling) energy trading with the main grid. To this end, new models are put forth to account for the stochastic RES harvesting, two-way energy trading, and conditional value-at-risk (CVaR) bas…
Joint Communication and Sensing (JCAS) is envisioned for 6G cellular networks, where sensing the operation environment, especially in presence of humans, is as important as the high-speed wireless connectivity. Sensing, and subsequently recognizing blockage types, is an initial step towards signal blockage avoidance. In this context, we investigate the feasibility of using human motion recognition as a surrogate task for blockage type recognition through a set of hypothesis validation experiments using both qualitative and quantitative analysis (visual inspection and hyperparameter tuning of d…
Beamforming gain is a key ingredient in the performance of LEO satellite communication systems to be integrated into cellular networks. However, beam codebooks previously designed in the context of MIMO communication for terrestrial networks, do not provide the appropriate performance in terms of inter-beam interference and gain stability as the satellite moves. In this paper, we propose a dynamic codebook that provides a stable gain during the period of time that the satellite covers a given cell, while avoiding link retraining and extra calculation as the satellite moves. In addition, the pr…
Cellular-connected unmanned aerial vehicles (UAVs) are recently getting significant attention due to various practical use cases, e.g., surveillance, data gathering, purchase delivery, among other applications. Since UAVs are low power nodes, energy and spectral efficient communication is of paramount importance. To that end, multiple access (MA) schemes can play an important role in achieving high energy efficiency and spectral efficiency. In this work, we introduce rate-splitting MA (RSMA) and non-orthogonal MA (NOMA) schemes in a cellular-connected UAV network. In particular, we investigate…
In this paper, we consider the cellular Internet of unmanned aerial vehicles (UAVs), where UAVs sense data for multiple tasks and transmit the data to the base station (BS). To quantify the "freshness" of the data at the BS, we bring in the concept of the age of information (AoI). The AoI is determined by the time for UAV sensing and that for UAV transmission, and gives rise to a trade-off within a given period. To minimize the AoI, we formulate a joint sensing time, transmission time, UAV trajectory, and task scheduling optimization problem. To solve this problem, we first propose an iterativ…
In the current unmanned aircraft systems (UASs) for sensing services, unmanned aerial vehicles (UAVs) transmit their sensory data to terrestrial mobile devices over the unlicensed spectrum. However, the interference from surrounding terminals is uncontrollable due to the opportunistic channel access. In this paper, we consider a cellular Internet of UAVs to guarantee the Quality-of-Service (QoS), where the sensory data can be transmitted to the mobile devices either by UAV-to-Device (U2D) communications over cellular networks, or directly through the base station (BS). Since UAVs' sensing and …
Numerous communications and networking challenges prevent deploying unmanned aerial vehicles (UAVs) in extreme environments where the existing wireless technologies are mainly ground-focused; and, as a consequence, the air-to-air channel for UAVs is not fully covered. In this paper, a novel spatial estimation for beamforming is proposed to address UAV-based joint sensing and communications (JSC). The proposed spatial estimation algorithm relies on using a delay tolerant observer-based predictor, which can accurately predict the positions of the target UAVs in the presence of uncertainties due …
Reconfigurable intelligent surface (RIS) is a revolutionary technology for sixth-generation (6G) networks owing to its ability to manipulate wireless environments. As a frequency-selective device, RIS can only effectively shape the propagation of signals within a certain frequency band. Due to this frequency-selective property, the deployment of RIS in cellular networks will introduce a complicated base station (BS)-RIS-user association issue since adjacent BSs operate at different frequency bands. In this paper, with the consideration of the frequency-selective characteristics of RIS, we aim …
Supporting reliable and seamless wireless connectivity for unmanned aerial vehicles (UAVs) has recently become a critical requirement to enable various different use cases of UAVs. Due to their widespread deployment footprint, cellular networks can support beyond visual line of sight (BVLOS) communications for UAVs. In this paper, we consider cellular connected UAVs (C-UAVs) that are served by massive multiple-input-multiple-output (MIMO) links to extend coverage range, while also improving physical layer security and authentication. We consider Rician channel and propose a novel linear precod…
Initial access (IA) is a fundamental physical layer procedure in cellular systems where user equipment (UE) detects nearby base station (BS) as well as acquire synchronization. Due to the necessity of using antenna array in millimeter-wave (mmW) IA, the channel spatial information can also be inferred. The state-of-the-art directional IA (DIA) uses sector sounding beams with limited angular resolution, and thus requires additional dedicated radio resources, access latency and overhead for refined beam training. To remedy the problem of access latency and overhead in DIA, this work proposes to …
We study the distribution of the interference power in a millimeter wave (mmWave) cellular network. Such interference is random and highly dependent on the employed transmission technique, as well as the varying channel conditions and the varying association between users and base stations. Traditional networks at lower frequencies usually employ omnidirectional transmission which creates an (almost) equal amount of interference in any direction. MmWave networks, however, must employ directional beamforming transmission in order to compensate for the high path loss in mmWave frequency bands. T…
Due to the advantages of flexible deployment and extensive coverage, unmanned aerial vehicles (UAVs) have great potential for sensing applications in the next generation of cellular networks, which will give rise to a cellular Internet of UAVs. In this paper, we consider a cellular Internet of UAVs, where the UAVs execute sensing tasks through cooperative sensing and transmission to minimize the age of information (AoI). However, the cooperative sensing and transmission is tightly coupled with the UAVs' trajectories, which makes the trajectory design challenging. To tackle this challenge, we p…
The mushroom growth of cellular users requires novel advancements in the existing cellular infrastructure. One way to handle such a tremendous increase is to densely deploy terrestrial small-cell base stations (TSBSs) with careful management of smart backhaul/fronthaul networks. Nevertheless, terrestrial backhaul hubs significantly suffer from the dense fading environment and are difficult to install in a typical urban environment. Therefore, this paper considers the idea of replacing terrestrial backhaul network with an aerial network consisting of unmanned aerial vehicles (UAVs) to provide t…
Localization plays a key role for safe operation of UAVs enabling beyond visual line of sight applications. Compared to GPS based localization, cellular networks can reduce the positioning error and cost since cellular connectivity is becoming a prominent solution as a communication system for UAVs. As a first step towards localization, UAV needs to receive sufficient number of localization signals each having a signal to interference plus noise ratio (SINR) greater than a threshold, which is defined as localizability. On the other hand, three-dimensional mobility of UAVs, altitude dependent c…
Cellular-connected unmanned aerial vehicle (UAV) has attracted a surge of research interest in both academia and industry. To support aerial user equipment (UEs) in the existing cellular networks, one promising approach is to assign a portion of the system bandwidth exclusively to the UAV-UEs. This is especially favorable for use cases where a large number of UAV-UEs are exploited, e.g., for package delivery close to a warehouse. Although the nearly line-of-sight (LoS) channels can result in higher powers received, UAVs can in turn cause severe interference to each other in the same frequency …
This letter proposes an analytical framework to evaluate the coverage performance of a cellular-connected unmanned aerial vehicle (UAV) network in which UAV user equipments (UAV-UEs) are equipped with directional antennas and move according to a three-dimensional (3D) mobility model. The ground base stations (GBSs) equipped with practical down-tilted antennas are distributed according to a Poisson point process (PPP). With tools from stochastic geometry, we derive the handover probability and coverage probability of a random UAV-UE under the strongest average received signal strength (RSS) ass…
Reconfigurable Intelligent Surfaces (RISs) are one of the key emerging 6th Generation (6G) technologies that are expected to improve the link budgets between transmitters and receivers by adding artificial propagation paths. In such re-configured propagation environment, Downlink (DL) Multi-User Multi-Input Multi-Output (MU-MIMO) brings capacity improvement to cellular networks. It benefits from the spatial dimension offered by MIMO systems to enable simultaneous transmission of independent data streams to multiple users on the same radio resources by applying appropriate Beamforming (BF) sche…
Unmanned Aerial Vehicles (UAVs) promise to become an intrinsic part of next generation communications, as they can be deployed to provide wireless connectivity to ground users to supplement existing terrestrial networks. The majority of the existing research into the use of UAV access points for cellular coverage considers rotary-wing UAV designs (i.e. quadcopters). However, we expect fixed-wing UAVs to be more appropriate for connectivity purposes in scenarios where long flight times are necessary (such as for rural coverage), as fixed-wing UAVs rely on a more energy-efficient form of flight …
The sixth generation (6G) mobile communication networks are expected to offer a new paradigm of cellular integrated sensing and communication (ISAC). However, due to the intrinsic difference between sensing and communication in terms of coverage requirement, current cellular networks that are deliberately planned mainly for communication coverage are difficult to achieve seamless sensing coverage. To address this issue, this paper studies the beamforming optimization towards seamless sensing coverage for a basic bi-static ISAC system, while ensuring that the communication requirements of multi…
In this paper, we consider a single-cell cellular network with a number of cellular users (CUs) and unmanned aerial vehicles (UAVs), in which multiple UAVs upload their collected data to the base station (BS). Two transmission modes are considered to support the multi-UAV communications, i.e., UAV-to-infrastructure (U2I) and UAV-to-UAV (U2U) communications. Specifically, the UAV with a high signal to noise ratio (SNR) for the U2I link uploads its collected data directly to the BS through U2I communication, while the UAV with a low SNR for the U2I link can transmit data to a nearby UAV through …
To accommodate the explosive wireless traffics, massive multiple-input multiple-output (MIMO) is regarded as one of the key enabling technologies for next-generation communication systems. In massive MIMO cellular networks, coordinated beamforming (CBF), which jointly designs the beamformers of multiple base stations (BSs), is an efficient method to enhance the network performance. In this paper, we investigate the sum rate maximization problem in a massive MIMO mobile cellular network, where in each cell a multi-antenna BS serves multiple mobile users simultaneously via downlink beamforming. …
