We report a comprehensive study of low-power, octave-bandwidth, single-soliton microresonator frequency combs in both the 1550 nm and 1064 nm bands. Our experiments utilize fully integrated silicon-nitride Kerr microresonators, and we demonstrate direct soliton generation with widely available distributed-Bragg-reflector lasers that provide less than 40 mW of chip-coupled laser power. We report measurements of soliton thermal dynamics and demonstrate how rapid laser-frequency control, consistent with the thermal timescale of a microresonator, facilitates stabilization of octave-bandwidth soliton combs. Moreover, since soliton combs are completely described by fundamental linear and nonlinear dynamics of the intraresonator field, we demonstrate the close connection between modeling and generation of octave-bandwidth combs. Our experiments advance the development of self-referenced frequency combs with integrated-photonics technology, and comb-laser sources with tens of terahertz pulse bandwidth across the near-infrared.
Octave-spanning, self-referenced frequency combs are applied in diverse fields ranging from precision metrology to astrophysical spectrometer calibration. In the past decade, Kerr frequency comb generators have emerged as alternative scheme offering chip-scale integration, high repetition rate and bandwidths that are only limited by group velocity dispersion. The recent observation of Kerr frequency combs operating in the dissipative Kerr soliton (DKS) regime, along with dispersive wave formation, has provided the means for fully coherent, broadband Kerr frequency comb generation with engineer…
Quantum cascade lasers are proving to be instrumental in the development of compact frequency comb sources at mid-infrared and terahertz frequencies. Here we demonstrate a heterogeneous terahertz quantum cascade laser with two active regions spaced exactly by one octave. Both active regions are based on a four-quantum well laser design and they emit a combined 3~mW peak power at 15~K in pulsed mode. The two central frequencies are 2.3~THz (bandwidth 300~GHz) and 4.6~THz (bandwidth 270~GHz). The structure is engineered in a way that allows simultaneous operation of the two active regions in the…
Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to their future use as 'frequency markers', is however the absolute frequency stabilization of the optical comb spectrum. A powerful technique for this stabilization is self-referencing, which requires a spec…
We demonstrate an octave-spanning frequency comb with a spectrum covering wavelengths from 1,540 nm up to 3,200 nm. The supercontinuum is generated by pumping a 1-cm long dispersion engineered silicon wire waveguide by 70 fs pulses with an energy of merely 15 pJ. We confirm the phase coherence of the output spectrum by beating the supercontinuum with narrow bandwidth CW lasers. We show that the experimental results are in agreement with numerical simulations.
Broad bandwidth and stable microresonator frequency combs are critical for accurate and precise optical frequency measurements in a compact and deployable format. Typically, broad bandwidths (e.g., octave spans) are achieved by tailoring the microresonator's geometric dispersion. However, geometric dispersion engineering alone may be insufficient for sustaining bandwidths well beyond an octave. Here, we introduce the novel concept of synthetic dispersion, in which a second pump laser effectively alters the dispersion landscape to create Kerr soliton microcombs that extend far beyond the anomal…
Broadband Kerr combs with a flat comb spectral profile are expected in a number of applications, such as high-capacity optical communication. Here, we propose novel concentric dual-ring microresonators (DRMs) for advanced dispersion engineering to tailor the comb spectral profile. The dispersion can be flexibly engineered not only by the cross-section of the DRMs, but also by the gap between concentric dual-ring microresonators, which provides a new path to geometrically control the spectral profile of the soliton Kerr combs. An octave-spanning dissipative Kerr soliton comb with superior spect…
We demonstrate mid-infrared (mid-IR) supercontinuum generation (SCG) with instantaneous bandwidth from 2.2 to 5 μm at 40 dB below the peak, covering the wavelength range desirable for molecular spectroscopy and numerous other applications. The SCG occurs in a tapered As2S3 fiber prepared by in-situ tapering and is pumped by femtosecond pulses from the subharmonic of a mode-locked Er-doped fiber laser. Interference with a narrow linewidth c.w. laser verifies that the coherence properties of the near-IR frequency comb have been preserved through these cascaded nonlinear processes. With this appr…
Entangled photon spectroscopy is a nascent field that has important implications for measurement and imaging across chemical, biology, and materials fields. Entangled photon spectroscopy potentially offers improved spatial and temporal-frequency resolutions, increased cross sections for multiphoton and nonlinear measurements, and new abilities in inducing or measuring quantum correlations. A critical step in enabling entangled photon spectroscopies is the creation of high-flux entangled sources that can use conventional detectors, as well as provide redundancy for the losses in realistic sampl…
We present here a semiconductor injection laser operating in continuous wave with an emission covering more than one octave in frequency, and displaying homogeneous power distribution among the lasing modes. The gain medium is based on a heterogeneous quantum cascade structure operating in the THz range. Laser emission in continuous wave takes place from 1.64 THz to 3.35 THz with optical powers in the mW range and more than 80 modes above threshold. Free-running beatnote investigations on narrow waveguides with linewidths of 980 Hz limited by jitter indicate frequency comb operation on a spect…
We demonstrate a frequency comb spanning an octave via the parametric process of cascaded four-wave mixing in a monolithic, high-Q silicon nitride microring resonator. The comb is generated from a single-frequency pump laser at 1562 nm and spans 128 THz with a spacing of 226 GHz, which can be tuned slightly with the pump power. In addition, we investigate the RF-noise characteristics of the parametric comb and find that the comb can operate in a low-noise state with a 30-dB reduction in noise as the pump frequency is tuned into the cavity resonance.
A generalized Lugiato-Lefever equation is numerically solved with a Newton-Raphson method to model Kerr frequency combs. We obtain excellent agreement with past experiments, even for an octave-spanning comb. Simulations are much faster than with any other technique despite including more modes than ever before. Our study reveals that Kerr combs are associated with temporal cavity solitons and dispersive waves, and opens up new avenues for the understanding of Kerr comb formation.
We numerically study, by means of the single envelope equation, the generation of optical frequency combs ranging from the visible to the mid-infrared spectral regions in resonators with quadratic and cubic nonlinearities. Phase-matched quadratic wave-mixing processes among the comb lines can be activated by low-power continuous wave pumping in the near infrared of a radially poled lithium niobate whispering gallery resonator (WGR). We examine both separate and co-existing intra-cavity doubly resonant second-harmonic generation and parametric oscillation processes, and find that modulation ins…
The ideal laser source for the emerging research field of nonlinear Terahertz (THz) spectroscopy should offer radiation with a large versatility and deliver both ultra-intense multi-octave spanning single-cycle pulses and user-selectable multi-cycle pulses at narrow linewidth. The absence of such a table-top source has hampered advances in numerous THz disciplines including imaging, nonlinear photonics and spectroscopy, selective out-of-equilibrium excitation of condensed matter and quantum systems. Here we introduce a highly versatile table-top THz laser platform providing single-cycle GV/m t…
Frequency combs spanning over an octave have been successfully demonstrated in Kerr nonlinear microresonators on-chip. These micro-combs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically-coupled pump. The latter is challenging as the spatial overlap between the access waveguide and the ring modes decays with frequency. This leads to strong coupling variation across the octave, with poor extraction at short wave…
Ultrafast supercontinuum generation in gas-filled waveguides is one enabling technology for many intriguing application ranging from attosecond metrology towards biophotonics, with the amount of spectral broadening crucially depending on the pulse dispersion of the propagating mode. Here we show that the structural resonances in gas-filled anti-resonant hollow core optical fiber provide an additional degree of freedom in dispersion engineering, allowing for the generation of more than three octaves of broadband light ranging deep UV wavelength towards the near infrared.Our observation relies o…
Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekeeping in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, stably accessing such states is complicated by thermo-optic dispersion. For example, in the Si3N4 platform, precisely dispersion-engineered structures can support broadband operation, but microsecond thermal time constant…
A compact and robust coherent laser light source that provides spectral coverage from the ultraviolet to infrared is desirable for numerous applications, including heterodyne super resolution imaging[1], broadband infrared microscopy[2], protein structure determination[3], and standoff atmospheric trace-gas detection[4]. Addressing these demanding measurement problems, laser frequency combs[5] combine user-defined spectral resolution with sub-femtosecond timing and waveform control to enable new modalities of high-resolution, high-speed, and broadband spectroscopy[6-9]. In this Letter we intro…
We show experimentally and theoretically that the spectral components of a multi-octave frequency comb spontaneously created by stimulated Raman scattering in a hydrogen-filled hollow-core photonic crystal fiber exhibit strong self coherence and mutual coherence within each 12 ns driving laser pulse. This coherence arises in spite of the field's initiation being from quantum zero-point fluctuations, which causes each spectral component to show large phase and energy fluctuations. This points to the possibility of an optical frequency comb with nonclassical correlations between all comb lines.
The field of attosecond science was first enabled by nonlinear compression of intense laser pulses to a duration below two optical cycles. Twenty years later, creating such short pulses still requires state-of-the-art few-cycle laser amplifiers to most efficiently exploit 'instantaneous' optical nonlinearities in noble gases for spectral broadening and parametric frequency conversion. Here, we show that nonlinear compression can in fact be much more efficient when driven in molecular gases by pulses substantially longer than a few cycles, due to enhanced optical nonlinearity associated with ro…
High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the UV to the THz would offer unprecedented versatility and opportunities for a spectacular range of applications from bio-chemical sensing, to time-resolved and nonlinear spectroscopy, to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontinuum generation can provide relatively large spectral coverage, but many applications require much broader spectral range and low-jitter synchronization for time-domain measurements. Here, we present a…
The perfect soliton crystal (PSC) was recently discovered as an extraordinary Kerr soliton state with regularly distributed soliton pulses and enhanced comb line power spaced by multiples of the cavity free spectral ranges (FSRs). The modulation of continuous-wave excitation in optical microresonators and the tunable repetition rate characteristic will significantly enhance and extend the application potential of soliton microcombs for self-referencing comb source, terahertz wave generation, and arbitrary waveform generation. However, the reported PSC spectrum is generally narrow. Here, we dem…
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics including miniaturization, low power consumption, broad spectral range and inherent coherence for various applications such as precision measurement, communications, microwave photonics, and astronomical spectrometer calibration. To date, octave-spanning DKSs with a free spectral range (FSR) of ~1 THz have been achieved only in ultrahigh-Q silicon nitride microresonators, with elaborate wavelength control required. Here we demonstrate an octave-spanning DKS in an aluminium nitride …
We present a new technique to synthesize high-power single-cycle pulses in the visible and ultraviolet ranges by coherent superposition of a multiband octave-spanning spectrum obtained by highly-nondegenerate cascaded four-wave mixing of femtosecond pulses in bulk isotropic nonresonant media. The generation of coherent spectra spanning over two octaves in bandwidth is experimentally demonstrated using a thin fused silica slide. Full characterization of the intervening multicolored fields using frequency-resolved optical gating, where multiple cascaded orders have been measured simultaneously f…
Coherent laser beams in the 3 to 20 μm region of the spectrum are most applicable for chemical sensing by addressing the strongest vibrational absorption resonances of the media. Broadband frequency combs in this spectral range are of special interest since they can be used as a powerful tool for molecular spectroscopy offering dramatic gains in speed, sensitivity, precision, and massive parallelism of data collection. Here we show that a frequency comb realized through subharmonic generation in an optical parametric oscillator (OPO) based on orientation-patterned gallium phosphide (OP-GaP) pu…
We describe a coherent mid-infrared continuum source with 700 cm-1 usable bandwidth, readily tuned within 600 - 2500 cm-1 (4 - 17 \mum) and thus covering much of the infrared "fingerprint" molecular vibration region. It is based on nonlinear frequency conversion in GaSe using a compact commercial 100-fs-pulsed Er fiber laser system providing two amplified near-infrared beams, one of them broadened by a nonlinear optical fiber. The resulting collimated mid-infrared continuum beam of 1 mW quasi-cw power represents a coherent infrared frequency comb with zero carrier-envelope phase, containing ab…
Implementing optical-frequency combs with integrated photonics will enable wider use of precision timing signals.Here, we explore the generation of an octave-span, Kerr-microresonator frequency comb, using hybrid integration ofan InP distributed-feedback laser and a SiN photonic-integrated circuit. We demonstrate electrically pumped and fiber-packaged prototype systems, enabled by self-injection locking. This direct integration of a laser and a microresonatorcircuit without previously used intervening elements, like optical modulators and isolators, necessitates understand-ing self-injection-l…
Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, this goal has been consistently hindered by the use of bulk free-space and fiber-optic components to process microcombs, limiting form factors to the table-top. Here, we address this challe…
Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously off…
We perform the first theoretical modeling of the spectral-temporal dynamics of parametric microresonator comb generation with octave-spanning bandwidths through use of the Lugiato-Lefever model extended to include higher-order dispersion and self-steepening. We show that three distinct stages are necessary to achieve single-pulse modelocking and ultrabroadband, stabilized combs. Our simulations agree well with previous experimental demonstrations and predict many of the observed features, including multi-pulse generation, dispersive wave generation, modelocking and comb stabilization.
We report new limits on the phase coherence of the ultrafast mode-locking process in an octave-spanning Ti:sapphire comb. We find that the mode-locking mechanism correlates optical phase across a full optical octave with less than 2.5 micro Hz relative linewidth. This result is at least two orders of magnitude below recent predictions for quantum-limited individual comb-mode linewidths, verifying that the mode-locking mechanism strongly correlates quantum noise across the comb spectrum.
It is demonstrated that Kerr frequency comb generation described by coupled mode equations can be numerically simulated using Fast Fourier Transform methods. This allows broadband frequency combs spanning a full octave to be efficiently simulated using standard algorithms, resulting in orders of magnitude improvements in the computation time.
We demonstrate a photonic RF Hilbert transformer for broadband microwave in-phase and quadrature-phase generation based on an integrated frequency optical comb, generated using a nonlinear microring resonator based on a CMOS compatible, high-index contrast, doped-silica glass platform. The high quality and large frequency spacing of the comb enables filters with up to 20 taps, allowing us to demonstrate a quadrature filter with more than a 5-octave (3 dB) bandwidth and an almost uniform phase response.
Development of novel radiation-absorbent materials and devices for millimetre and submillimetre astronomy instruments is a research area of high interest, and with substantial engineering challenges. Alongside low-profile structure and ultra-wideband performance in a wide range of angles of incidence, advanced absorbers in CMB instruments are aimed at reducing optical systematics, notably instrument polarisation, far beyond previous specifications. This paper presents an innovative design of flat thin flexible absorber operating in a wide frequency range of 80-400 GHz. The structure comprises …
Self-aligned optical microcomb emerging between octave separated lasers
Joint Quantum Institute, NIST/University of Maryland（联合量子研究所，美国国家标准与技术研究院/马里兰大学）；Microsystems and Nanotechnology Division, National Institute of Standards and Technology（微系统与纳米技术部，美国国家标准与技术研究院）；University of Maryland Baltimore County（马里兰大学巴尔的摩县分校）；AV Incorporated（AV公司）；Department of Physics, University of Auckland（奥克兰大学物理系）；The Dodd-Walls Centre for Photonic and Quantum Technologies（Dodd-Walls光子与量子技术中心）；Department of Electrical and Computer Engineering, University of California Santa Barbara（加州大学圣塔芭芭拉分校电气与计算机工程系）；Air Force Research Laboratory, Space Vehicles Directorate（空军研究实验室，航天器管理局）
We report and characterize low-temperature, plasma-deposited deuterated silicon nitride thin films for nonlinear integrated photonics. With a peak processing temperature less than 300$^\circ$C, it is back-end compatible with pre-processed CMOS substrates. We achieve microresonators with a quality factor of up to $1.6\times 10^6 $ at 1552 nm, and $>1.2\times 10^6$ throughout $λ$ = 1510 -- 1600 nm, without annealing or stress management. We then demonstrate the immediate utility of this platform in nonlinear photonics by generating a 1 THz free spectral range, 900-nm-bandwidth modulation-instabi…
We present an antipodal Vivaldi antenna for broadband double metal waveguide terahertz quantum cascade lasers and frequency combs. Its exponentially curved flare profile results in an adiabatic in-plane mode expansion, producing an improved far-field with a single-lobed beam of (23°x19°) full width half maximum with an octave-spanning bandwidth. The antenna also acts as a wave retarder, rotating the polarization from vertical toward horizontal polarization by a frequency-dependent angle. The laser's emission spectrum and current-voltage characteristics are not affected, as well as frequency co…
Single-cycle pulses with deterministic carrier-envelope phase enable the study and control of light-matter interactions at the sub-cycle timescale, as well as the efficient generation of low-noise multi-octave frequency combs. However, current single-cycle light sources are difficult to implement and operate, hindering their application and accessibility in a wider range of research. In this paper, we present a single-cycle 100 MHz frequency comb in a compact, turn-key, and reliable all-silica-fiber format. This is achieved by amplifying 2 $μ$m seed pulses in heavily-doped Tm:fiber, followed b…
Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applications in frequency metrology and precision spectroscopy, it is desirable to not only support self-referencing, but also to generate low-noise combs with customizable broadband spectra. In this work, w…
