We numerically study, by means of the single envelope equation, the generation of optical frequency combs ranging from the visible to the mid-infrared spectral regions in resonators with quadratic and cubic nonlinearities. Phase-matched quadratic wave-mixing processes among the comb lines can be activated by low-power continuous wave pumping in the near infrared of a radially poled lithium niobate whispering gallery resonator (WGR). We examine both separate and co-existing intra-cavity doubly resonant second-harmonic generation and parametric oscillation processes, and find that modulation instabilities may lead to the formation of coupled comb arrays extending over multiple octaves. In the temporal domain, the frequency combs may correspond to pulse trains, or isolated pulses.
Broadband Kerr combs with a flat comb spectral profile are expected in a number of applications, such as high-capacity optical communication. Here, we propose novel concentric dual-ring microresonators (DRMs) for advanced dispersion engineering to tailor the comb spectral profile. The dispersion can be flexibly engineered not only by the cross-section of the DRMs, but also by the gap between concentric dual-ring microresonators, which provides a new path to geometrically control the spectral profile of the soliton Kerr combs. An octave-spanning dissipative Kerr soliton comb with superior spect…
The perfect soliton crystal (PSC) was recently discovered as an extraordinary Kerr soliton state with regularly distributed soliton pulses and enhanced comb line power spaced by multiples of the cavity free spectral ranges (FSRs). The modulation of continuous-wave excitation in optical microresonators and the tunable repetition rate characteristic will significantly enhance and extend the application potential of soliton microcombs for self-referencing comb source, terahertz wave generation, and arbitrary waveform generation. However, the reported PSC spectrum is generally narrow. Here, we dem…
High spectral purity frequency agile room temperature sources in the terahertz spectrum are foundational elements for imaging, sensing, metrology, and communications. Here we present a chip scale optical parametric oscillator based on an integrated nonlinear microresonator that provides broadly tunable single frequency and multi frequency oscillators in the terahertz regime. Through optical to terahertz down conversion using a plasmonic nanoantenna array, coherent terahertz radiation spanning 2.8 octaves is achieved from 330 GHz to 2.3 THz, with 20 GHz cavity mode limited frequency tuning step…
Parametric nonlinear optical processes allow for the generation of new wavelengths of coherent electromagnetic radiation. Their ability to create radiation that is widely tunable in wavelength is particularly appealing, with applications ranging from spectroscopy to quantum information processing. Unfortunately, existing tunable parametric sources are marred by deficiencies that obstruct their widespread adoption. Here we show that ultrahigh-Q crystalline microresonators made of magnesium fluoride can overcome these limitations, enabling compact and power-efficient devices capable of generatin…
Octave-spanning, self-referenced frequency combs are applied in diverse fields ranging from precision metrology to astrophysical spectrometer calibration. In the past decade, Kerr frequency comb generators have emerged as alternative scheme offering chip-scale integration, high repetition rate and bandwidths that are only limited by group velocity dispersion. The recent observation of Kerr frequency combs operating in the dissipative Kerr soliton (DKS) regime, along with dispersive wave formation, has provided the means for fully coherent, broadband Kerr frequency comb generation with engineer…
We report a comprehensive study of low-power, octave-bandwidth, single-soliton microresonator frequency combs in both the 1550 nm and 1064 nm bands. Our experiments utilize fully integrated silicon-nitride Kerr microresonators, and we demonstrate direct soliton generation with widely available distributed-Bragg-reflector lasers that provide less than 40 mW of chip-coupled laser power. We report measurements of soliton thermal dynamics and demonstrate how rapid laser-frequency control, consistent with the thermal timescale of a microresonator, facilitates stabilization of octave-bandwidth solit…
Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekeeping in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, stably accessing such states is complicated by thermo-optic dispersion. For example, in the Si3N4 platform, precisely dispersion-engineered structures can support broadband operation, but microsecond thermal time constant…
Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to their future use as 'frequency markers', is however the absolute frequency stabilization of the optical comb spectrum. A powerful technique for this stabilization is self-referencing, which requires a spec…
Implementing optical-frequency combs with integrated photonics will enable wider use of precision timing signals.Here, we explore the generation of an octave-span, Kerr-microresonator frequency comb, using hybrid integration ofan InP distributed-feedback laser and a SiN photonic-integrated circuit. We demonstrate electrically pumped and fiber-packaged prototype systems, enabled by self-injection locking. This direct integration of a laser and a microresonatorcircuit without previously used intervening elements, like optical modulators and isolators, necessitates understand-ing self-injection-l…
Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, this goal has been consistently hindered by the use of bulk free-space and fiber-optic components to process microcombs, limiting form factors to the table-top. Here, we address this challe…
We perform the first theoretical modeling of the spectral-temporal dynamics of parametric microresonator comb generation with octave-spanning bandwidths through use of the Lugiato-Lefever model extended to include higher-order dispersion and self-steepening. We show that three distinct stages are necessary to achieve single-pulse modelocking and ultrabroadband, stabilized combs. Our simulations agree well with previous experimental demonstrations and predict many of the observed features, including multi-pulse generation, dispersive wave generation, modelocking and comb stabilization.
A shaped doublet pump pulse is proposed for simultaneous octave-spanning soliton Kerr frequency comb generation and second-harmonic conversion in a single microresonator. The temporal soliton in the cavity is trapped atop a doublet pulse pedestal, resulting in a greatly expanded soliton region compared to that with a general Gaussian pulse pump. The possibility of single-microresonator comb self-referencing in a single silicon nitride microring, which can facilitate compact on-chip optical clocks, is demonstrated via simulation.
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics including miniaturization, low power consumption, broad spectral range and inherent coherence for various applications such as precision measurement, communications, microwave photonics, and astronomical spectrometer calibration. To date, octave-spanning DKSs with a free spectral range (FSR) of ~1 THz have been achieved only in ultrahigh-Q silicon nitride microresonators, with elaborate wavelength control required. Here we demonstrate an octave-spanning DKS in an aluminium nitride …
Octave-wide frequency combs in microresonators are essential for self-referencing. However, it is difficult for the small-size and high-repetition-rate microresonators to achieve perfect soliton modelocking over the broad frequency range due to the detrimental impact of dispersion. Here we examine the stability of the soliton states consisting of one hundred modes in silicon-nitride microresonators with the one-THz free spectral range. We report the coexistence of fast and slow solitons in a narrow detuning range, which is surrounded on either side by the breather states. We decompose the brea…
Frequency combs spanning over an octave have been successfully demonstrated in Kerr nonlinear microresonators on-chip. These micro-combs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically-coupled pump. The latter is challenging as the spatial overlap between the access waveguide and the ring modes decays with frequency. This leads to strong coupling variation across the octave, with poor extraction at short wave…
Broad bandwidth and stable microresonator frequency combs are critical for accurate and precise optical frequency measurements in a compact and deployable format. Typically, broad bandwidths (e.g., octave spans) are achieved by tailoring the microresonator's geometric dispersion. However, geometric dispersion engineering alone may be insufficient for sustaining bandwidths well beyond an octave. Here, we introduce the novel concept of synthetic dispersion, in which a second pump laser effectively alters the dispersion landscape to create Kerr soliton microcombs that extend far beyond the anomal…
Development of chip-scale optical frequency comb with the coverage from ultra-violet (UV) to mid-infrared (MIR) wavelength is of great significance. To expand the comb spectrum into the challenging UV region, a material platform with high UV transparency is crucial. In this paper, crystalline aluminum nitride (AlN)-onsapphire film is demonstrated for efficient Kerr frequency comb generation. Near-infrared (NIR) comb with nearly octave-spanning coverage and low parametric threshold is achieved in continuous-wave pumped high-quality-factor AlN microring resonators. The competition between stimul…
Kerr soliton frequency comb generation in monolithic microresonators recently attracted great interests as it enables chip-scale few-cycle pulse generation at microwave rates with smooth octave-spanning spectra for self-referencing. Such versatile platform finds significant applications in dual-comb spectroscopy, low-noise optical frequency synthesis, coherent communication systems, etc. However, it still remains challenging to straightforwardly and deterministically generate and sustain the single-soliton state in microresonators. In this paper, we propose and theoretically demonstrate the ex…
The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integrated package suitable for use in a wide-range of environments. Such an advance will significantly impact fields ranging from spectroscopy and trace gas sensing, to astronomy, communications, atomic t…
We report and characterize low-temperature, plasma-deposited deuterated silicon nitride thin films for nonlinear integrated photonics. With a peak processing temperature less than 300$^\circ$C, it is back-end compatible with pre-processed CMOS substrates. We achieve microresonators with a quality factor of up to $1.6\times 10^6 $ at 1552 nm, and $>1.2\times 10^6$ throughout $λ$ = 1510 -- 1600 nm, without annealing or stress management. We then demonstrate the immediate utility of this platform in nonlinear photonics by generating a 1 THz free spectral range, 900-nm-bandwidth modulation-instabi…
Solitons are shape preserving waveforms that are ubiquitous across nonlinear dynamical systems and fall into two separate classes, that of bright solitons, formed in the anomalous group velocity dispersion regime, and `dark solitons' in the normal dispersion regime. Both types of soliton have been observed in BEC, hydrodynamics, polaritons, and mode locked lasers, but have been particularly relevant to the generation of chipscale microresonator-based frequency combs (microcombs), used in numerous system level applications in timing, spectroscopy, and communications. For microcombs, both bright…
We demonstrate a frequency comb spanning an octave via the parametric process of cascaded four-wave mixing in a monolithic, high-Q silicon nitride microring resonator. The comb is generated from a single-frequency pump laser at 1562 nm and spans 128 THz with a spacing of 226 GHz, which can be tuned slightly with the pump power. In addition, we investigate the RF-noise characteristics of the parametric comb and find that the comb can operate in a low-noise state with a 30-dB reduction in noise as the pump frequency is tuned into the cavity resonance.
By continuous wave pumping of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectral bandwidth to 2/3 of an octave, sufficient for self referencing, in excellent agreement with recent theoretical predictions and the broadest coherent microresonator frequency comb generated to date.…
A generalized Lugiato-Lefever equation is numerically solved with a Newton-Raphson method to model Kerr frequency combs. We obtain excellent agreement with past experiments, even for an octave-spanning comb. Simulations are much faster than with any other technique despite including more modes than ever before. Our study reveals that Kerr combs are associated with temporal cavity solitons and dispersive waves, and opens up new avenues for the understanding of Kerr comb formation.
We investigate the effects of Raman and Kerr gain in crystalline microresonators and determine the conditions required to generate modelocked frequency combs. We show theoretically that strong, narrowband Raman gain determines a maximum microresonator size allowable to achieve comb formation. We verify this condition experimentally in diamond and silicon microresonators and show that there exists a competition between Raman and Kerr effects that leads to the existence of two different comb states.
We demonstrate an octave-spanning frequency comb with a spectrum covering wavelengths from 1,540 nm up to 3,200 nm. The supercontinuum is generated by pumping a 1-cm long dispersion engineered silicon wire waveguide by 70 fs pulses with an energy of merely 15 pJ. We confirm the phase coherence of the output spectrum by beating the supercontinuum with narrow bandwidth CW lasers. We show that the experimental results are in agreement with numerical simulations.
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line shaping, the intensity within the microring does not appear to be pulse-like.
Mid-infrared (mid-IR) frequency combs have broad applications in molecular spectroscopy and chemical/biological sensing. Recently developed microresonator-based combs in this wavelength regime could enable portable and robust devices using a single-frequency pump field. Here, we report the first demonstration of a modelocked microresonator-based frequency comb in the mid-IR spanning 2.4 μm to 4.3 μm. We observe high pump-to-comb conversion efficiency, in which 40% of the pump power is converted to the output comb power. Utilizing an integrated PIN structure allows for tuning the silicon micror…
We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of modelocked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy.
We demonstrate that flat-topped dissipative solitonic pulses, platicons, and corresponding frequency combs can be excited in optical microresonators with normal group velocity dispersion using either amplitude modulation of the pump or bichromatic pump. Soft excitation may occur in particular frequency range if modulation depth is large enough and modulation frequency is close to the free spectral range of the microresonator.
We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on a fast photodiode produces a noisy radio frequency signal with an spectral width significantly exceeding the linear bandwidth of the microresonator mode.
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded, normal dispersion silicon nitride microresonators, showing that mode coupling can strongly modify the local dispersion, even changing its sign. We demonstrate a link between mode coupling and initiat…
We propose a new type of broadband and low repetition rate frequency comb generator which has the shape of an elongated and nanoscale-shallow optical bottle microresonator created at the surface of an optical fiber. The free spectral range (FSR) of the broadband azimuthal eigenfrequency series of this resonator is the exact multiple of the FSR of the dense and narrowband axial series. The effective radius variation of the microresonator is close to a parabola with a nanoscale height which is greater or equal to lambda/2pi*n0 (here lambda is the characteristic radiation wavelength and n0 is the…
We demonstrate control and stabilization of an optical frequency comb generated by four-wave mixing in a monolithic microresonator with a mode spacing in the microwave regime (86 GHz). The comb parameters (mode spacing and offset frequency) are controlled via the power and the frequency of the pump laser, which constitutes one of the comb modes. Furthermore, generation of a microwave beat note at the comb's mode spacing frequency is presented, enabling direct stabilization to a microwave frequency standard.
A high-Q silica whispering-gallery mode microresonator is an attractive platform on which to demonstrate a broad and phase-locked Raman comb in various wavelength regimes. Raman combs can be used for applications such as compact pulse laser sources, sensors, optical clocks, and coherence tomography. However, the formation dynamics of a Raman comb has not been well exploited. Here we study the dynamics of the Raman comb formation in silica rod microresonators, which have cavity free spectral ranges in microwave rates. We generated a Raman comb with a smooth spectral envelope and also observed t…
Recent developments demonstrate that parametric four-wave mixing (FWM) in high-Q microresonators is a highly promising and effective approach for optical frequency comb generation, with applications including spectroscopy, optical clocks, arbitrary waveform generation, frequency metrology, and astronomical spectrograph calibration. Each of these microresonator platforms utilizes a scheme in which the system is pumped by a single-frequency laser at a cavity resonance. This scheme requires tuning of the pump wavelength into resonance and the generated comb is susceptible to fluctuations in pump …
Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared regime, many applications require combs at mid-infrared, visible or even ultra-violet wavelengths. Frequency combs can be transferred to other wavelengths via nonlinear optical processes, however, this becomes exceedingly challenging for high-repetition rate frequency combs. Here, it is demonstrated that a synchronously driven high-Q microresonator with a second-order optical nonlinearity can efficiently convert high-repetition rate near-infrared frequency combs to visible…
Experimental and theoretical studies of nonlinear frequency combs in χ^(3) optical microresonators attracted tremendous research interest during the last decade and resulted in prototypes of solitonbased steadily working devices. Realization of similar combs owing to χ^(2) optical nonlinearity promises new breakthroughs and is a big scientific challenge. We analyze the main obstacles for realization of the χ^(2) frequency combs in high-Q microresonators and propose two families of steadystate nonlinear solutions, including soliton and periodic solutions, for such combs. Despite generic periodi…
Microresonator based optical frequency combs (MFC) have demonstrated promise in extending the capabilities of optical frequency combs. Here we demonstrate all optical stabilization of a low noise temporal soliton based MFC in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The offset frequency is controlled by stabilization of the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by perform…
We demonstrate the first low-noise mid-IR frequency comb source using a silicon microresonator. Our observation of strong Raman scattering lines in the generated comb suggests that Raman and four-wave mixing interactions play a role in assisting the transition to the low-noise state. In addition, we characterize, the intracavity comb generation dynamics using an integrated PIN diode, which takes advantage of the inherent three-photon absorption process in silicon.
Recent experiments have demonstrated the generation of widely-spaced parametric sidebands that can evolve into "clustered" optical frequency combs in Kerr microresonators. Here we describe the physics that underpins the formation of such clustered comb states. In particular, we show that the phase-matching required for the initial sideband generation is such that (at least) one of the sidebands experiences anomalous dispersion, enabling that sideband to drive frequency comb formation via degenerate and non-degenerate four-wave mixing. We validate our proposal through a combination of experimen…
Mode interaction in silicon nitride micro-resonators is investigated. We provide clear experimental evidence of mode interaction between two family modes and mode interaction is demonstrated to be the cause of the comb generation in resonators with normal dispersion.
We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1…
