We show that nonlinear continuum elasticity can be effective in modeling plastic flows in crystals if it is viewed as Landau theory with an infinite number of equivalent energy wells whose configuration is dictated by the symmetry group GL(3,Z). Quasi-static loading can be then handled by athermal dynamics, while lattice based discretization can play the role of regularization. As a proof of principle, we study in this Letter dislocation nucleation in a homogeneously sheared 2D crystal and show that the global tensorial invariance of the elastic energy foments the development of complexity in the configuration of collectively nucleating defects. A crucial role in this process is played by the unstable higher symmetry crystallographic phases, traditionally thought to be unrelated to plastic flow in lower symmetry lattices.
Plastic deformations in body-centered-cubic (BCC) crystals have been of critical importance in diverse engineering and manufacturing contexts across length scales. Numerous experiments and atomistic simulations on BCC crystals reveal that classical crystal plasticity models with the Schmid law are not adequate to account for abnormal plastic deformations often found in these crystals. In this paper, we address a continuum mechanical treatment of anomalous plasticity in BCC crystals exhibiting non-Schmid effects, inspired from atomistic simulations recently reported. Specifically, anomalous fea…
Crystal-level strain rate sensitivity and temperature sensitivity are investigated in Zircaloy-4 using combined of bending creep test, digital image correlation, electron backscatter detection and thermo-mechanical tensile tests with crystal plasticity modelling. Crystal rate-sensitive properties are extracted from room temperature microscale creep, and temperature sensitivity from thermal polycrystalline responses. Crystal plasticity results show that large microscale creep strain is observed near notch tip increased up to 50% due to cross-slip activation. Grain-level microscale SRS is highly…
This study is inspired by the recent development of "virtual material testing laboratory" in which the main equipment is a full field crystal plasticity modeling tool. Ample examples have demonstrated its applications to sheet forming operations. In those applications, the mechanical anisotropy originated from the crystallographic texture can be adequately described, such as r-values and earing. Formability is another important property in sheet metal forming, which has yet not been equipped in these virtual laboratories. Though theoretical models for formability can be dated back to 1885 due …
The purpose of continuum plasticity models is to efficiently predict the behavior of structures beyond their elastic limits. The purpose of multiscale materials science models, among them crystal plasticity models, is to understand the material behavior and design the material for a given target. The current successful continuum hyperelastoplastic models are based in the multiplicative decomposition from crystal plasticity, but significant differences in the computational frameworks of both approaches remain, making comparisons not straightforward. In previous works we have presented a theory …
Efficient and precise prediction of plasticity by data-driven models relies on appropriate data preparation and a well-designed model. Here we introduce an unsupervised machine learning-based data preparation method to maximize the trainability of crystal orientation evolution data during deformation. For Taylor model crystal plasticity data, the preconditioning procedure improves the test score of an artificial neural network from 0.831 to 0.999, while decreasing the training iterations by an order of magnitude. The efficacy of the approach was further improved with a recurrent neural network…
To reduce reliance on experimental fitting data within the crystal plasticity finite element method (CPFEM), an approached is proposed that integrates first-principles calculations based on density functional theory (DFT) to predict the strain hardening behavior of pure Ni single crystals. Flow resistance was evaluated through the Peierls-Nabarro equation using the ideal shear strength and elastic properties calculated by DFT-based methods, with hardening behavior modeled by imposing strains on supercells in first-principles calculations. Considered alone, elastic interactions of pure edge dis…
As an extension to strain-gradient models of size-dependent plastic behaviour, this work proposes a model for a stress-gradient theory. The model is distinguished from earlier works on the topic by its being embedded in a thermodynamically consistent framework. The development is carried out in the context of single-crystal plasticity, and draws on thermodynamically consistent models for single-crystal conventional and strain-gradient plasticity. The model is explored numerically using the example of torsion of a thin wire comprising a face centred cubic crystal, and its behaviour compared wit…
The importance of accurate simulation of the plastic deformation of ductile metals to the design of structures and components is well-known. Many techniques exist that address the length scales relevant to deformation pro- cesses, including dislocation dynamics (DD), which models the interaction and evolution of discrete dislocation line segments, and crystal plasticity (CP), which incorporates the crystalline nature and restricted motion of dis- locations into a higher scale continuous field framework. While these two methods are conceptually related, there have been only nominal efforts focu…
A Crystal Plasticity Finite Element (CPFE) framework is proposed for modeling the non-Schmid yield behavior of L12 type Ni3Al crystals and Ni-based superalloys. This framework relies on the estimation of the non-Schmid model parameters directly from the orientation- and temperature-dependent experimental yield stress data. The inelastic deformation model for Ni3Al crystals is extended to the precipitate phase of Ni-based superalloys in a homogenized dislocation density based crystal plasticity framework. The framework is used to simulate the orientation- and temperature-dependent yield of Ni3A…
The statistics and origin of the first discrete plastic event in a one dislocation dynamics simulation are studied. This is done via a linear stability analysis of the evolving dislocation configuration up to the onset of irreversible plasticity. It is found, via a fold catastrophe, the dislocation configuration prior to loading directly determines the stress at which the plastic event occurs and that between one and two trigger dislocations are involved. The resulting irreversible plastic strain arising from the instability is found to be highly correlated with these triggering dislocations.
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation…
This work integrates in-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in high carbon bearing steels. The presence of a kinematically metastable retained austenite in bearing steels can significantly affect the macro-mechanical and micro-mechanical material response. Mechanical characterization of metastable austenite is a critical component in accurately capturing the micro-mechanical behavior under typical application loads. Traditional mechanical characterization techniques are unable to discretely quantify the …
Despite decades of extensive research on mechanical properties of diamond, much remains to be understood in term of plastic deformation mechanisms due to the poor deformability at room temperature. In a recent work in Advanced Materials, it was claimed that room-temperature plasticity occurred in <001>-oriented single-crystal diamond nanopillars based on observation of unrecovered deformation inside scanning electron microscope. The plastic deformation was suggested to be mediated by a phase transition from sp3 carbon to an O8-carbon phase by molecular dynamics simulations. By comparison, our …
The influence of grain size on the flow stress of various FCC polycrystals (Cu, Al, Ag and Ni) has been analyzed by means of computational homogenization of a representative volume element of the microstructure using a FFT approach in combination with a strain gradient crystal plasticity model. The density of geometrically necessary dislocations resulting from the incompatibility of plastic deformation among different crystals was obtained from the Nye tensor, which was efficiently obtained from the curl operation in the Fourier space. The simulation results were in good agreement with the exp…
A long standing postulate in crystal plasticity of metals is that yielding commences once the resolved shear stress on a slip plane reaches a critical value. This assumption, known as Schmid law, implies that the onset of plasticity is independent of the normal stress acting on the slip plane. We examine the validity of this assumption in single crystal perfect lattices at zero temperature by subjecting them to a wide range of combined normal and shear stresses and identifying the onset of plasticity. We employ phonon stability analysis on four distinct single crystal metals and identify the o…
Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
University of California Los Angeles（加州大学洛杉矶分校）；Lawrence Livermore National Laboratory（劳伦斯利弗莫尔国家实验室）；Universidad Politécnica de Madrid（马德里理工大学）；Max-Planck-Institut für Eisenforschung（马克斯·普朗克铁研究所）
Comment on "Giant Plasticity of a Quantum Crystal"
在他们的信中，Haziot et al. [Phys. Rev. Lett. 110（2013）035301]报道了hcp氦-4量子晶体的巨大塑性的新现象。他们断言氦-4具有经典塑性理论中没有的机械性质。具体来说，他们研究了高质量晶体作为温度和施加应变的函数，其中剪切模量达到平台，耗散接近于零;据报道，这两个量与应力和应变无关，这意味着可逆的耗散过程和量子隧穿。在这篇评论中，我们表明，这些签名可以用热激活位错滑移的经典模型来解释，而不需要调用量子隧穿或无耗散运动。最近，我们提出了一个固体氦-4中的位错滑移模型，该模型包含在存在具有定性相似行为的其他位错的情况下的耗散贡献[Zhou等人，Philos. Mag. Lett. 92（2012）608]。
A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method while twin propagation is taken into account by means of a phase field model which is solved using a fast Fourier transform algorithm. The coupled crystal plasticity and phase field equations were solved using different discretizations of the simulation domain using the same time step for both of them. The numerical strategy was used to simulate the deformat…
This article is written in memory of Pierre Hohenberg with appreciation for his deep commitment to the basic principles of theoretical physics. I summarize recent developments in the theory of dislocation-enabled deformation of crystalline solids. This topic is especially appropriate for the Journal of Statistical Physics because materials scientists, for decades, have asserted that statistical thermodynamics is inapplicable to dislocations. By use of simple, first-principles analyses and comparisons with experimental data, I argue that these materials scientists have been wrong, and that this…
The mechanical response of almost pure single-crystal micro-pillars under compression exhibits a highly localized behavior that can endanger the structural stability of a sample. Recent experiments revealed that the mechanical response of a crystal is very sensitive to both the presence of a quenched disorder in the sample and the orientation of the crystal. In this work, we study the influence of disorder and crystal orientation on the large strain response of a 2D FCC crystal with three active glide planes using a very simple Eulerian plasticity model in the FE framework. Our numerical and t…
Three-dimensional discrete dislocation dynamics simulations are used to study strain-controlled plastic deformation of face-centered cubic aluminium single crystals. After describing the rate and size dependence of the average stress-strain curves, we study the power-law distributed strain bursts and the average avalanche shapes, and find a universal power-law exponent $τ\approx 1.0$ for all imposed strain rates and system sizes, characterizing both the event sizes and their durations. We discuss the dependence of our results on loading rate and compare these with previous studies of strain-co…
A consistent, small scale description of plastic motion in a crystalline solid is presented based on a phase field description. By allowing for independent mass motion given by the phase field, and lattice distortion, the solid can remain in mechanical equilibrium on the timescale of plastic motion. Singular (incompatible) strains are determined by the phase field, to which smooth distortions are added to satisfy mechanical equilibrium. A numerical implementation of the model is presented, and used to study a benchmark problem: the motion of an edge dislocation dipole in a hexagonal lattice. T…
Brittle topologically close-packed precipitates form in many advanced alloys. Due to their complex structures little is known about their plasticity. Here, we present a strategy to understand and tailor the deformability of these complex phases by considering the Nb-Co μ-phase as an archetypal material. The plasticity of the Nb-Co μ-phase is controlled by the Laves phase building block that forms parts of its unit cell. We find that between the bulk C15-NbCo$_2$ Laves and Nb-Co μ-phase, the interplanar spacing and local elastic modulus of the Laves phase building block change, leading to a str…
The microstructure evolution due to thermomechanical treatment of metals can largely be described by viscoplastic deformation, nucleation and grain growth. These processes take place over different length and time scales which present significant challenges when formulating simulation models. In particular, no overall unified field framework exists to model concurrent viscoplastic deformation and recrystallization and grain growth in metal polycrystals. In this work a thermodynamically consistent diffuse interface framework incorporating crystal viscoplasticity and grain boundary migration is …
Selective laser melting is receiving increasing interest as an additive manufacturing technique. Residual stresses induced by the large temperature gradients and inhomogeneous cooling process can favour the generation of cracks. In this work, a crystal plasticity finite element model is developed to simulate the formation of residual stresses and to understand the correlation between plastic deformation, grain orientation and residual stresses in the additive manufacturing process. The temperature profile and grain structure from thermal-fluid flow and grain growth simulations are implemented …
Electroplasticity is defined as the reduction in flow stress of a material undergoing deformation on passing an electrical pulse through it. The lowering of flow stress during electrical pulsing has been attributed to a combination of three mechanisms: softening due to Joule-heating of the material, de-pinning of dislocations from paramagnetic obstacles, and the electron-wind force acting on dislocations. However, there is no consensus in literature regarding the relative magnitudes of the reductions in flow stress resulting from each of these mechanisms. In this paper, we extend a dislocation…
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (basal and prismatic) were determined as a function of temperature. Stress along paths across the boundaries of two grain pairs, (1) a `rogue' grain pair and (2) a `non-rogue' grain pair, were determin…
This work presents a detailed experimental-numerical analysis of a low-carbon dual-phase steel microstructure, revealing evidence of significant anisotropic plastic deformation in lath martensite. A careful determination of the habit plane orientations in the present martensitic variants demonstrates that the observed traces of plastic slip coincide with the directions of the corresponding habit planes. To study the local lath martensite plastic activity, a dedicated substructure-enriched crystal plasticity based model is exploited. Compared with conventional bcc crystal plasticity, the model …
A phase field model of a crystalline material at the mesoscale is introduced to develop the necessary theoretical framework to study plastic flow due to dislocation motion. We first obtain the elastic stress from the phase field free energy and show that it obeys the stress strain relation of linear elasticity. Dislocations in a two dimensional hexagonal lattice are shown to be composite topological defects in the amplitude expansion of the phase field, with topological charges given by the Burgers vector. This allows us to introduce a formal relation between dislocation velocity and the evolu…
Stressed dislocation pattern formation in crystal plasticity at finite deformation is demonstrated for the first time. Size effects are also demonstrated within the same mathematical model. The model involves two extra material parameters beyond the requirements of standard classical crystal plasticity theory. The dislocation microstructures shown are decoupled from deformation microstructures, and emerge without any consideration of latent hardening or constitutive assumptions related to cross-slip. Crystal orientation effects on the pattern formation and mechanical response are also demonstr…
Ice plasticity has been thoroughly studied, owing to its importance in glaciers and ice sheets dynamics. In particular, its anisotropy (easy basal slip) has been suspected for a long time, then fully characterized 40 years ago. More recently emerged the interest of ice as a model material to study some fundamental aspects of crystalline plasticity. An example is the nature of plastic fluctuations and collective dislocation dynamics. 20 years ago, acoustic emission measurements performed during the deformation of ice single crystals revealed that plastic flow proceeds through intermittent dislo…
This paper unravels micromechanical aspects of metallic materials whose microstructure comprises grains of two or more phases. The local plastic response is determined by (i) the relative misorientation of the slip systems of individual grains, and (ii) the different mechanical properties of the phases. The relative importance of these two mechanisms at the meso-scale is unclear: is the plastic response dominated by the grain's anisotropy, or is this effect overwhelmed by the mechanical contrast between the two phases? The answer impacts the modeling of such a material at the meso-scale, but a…
We present a thermodynamic description of crystal plasticity. Our formulation is based on the Langer-Bouchbinder-Lookman thermodynamic dislocation theory (TDT), which asserts the fundamental importance of an effective temperature that describes the state of configurational disorder and therefore the dislocation density of the crystalline material. We extend the TDT description from isotropic plasticity to crystal plasticity with many slip systems. Finite-element simulations show favourable comparison with experiments on polycrystal fcc copper under uniaxial compression, tension, and simple she…
The influence of the microstructure of a polycrystalline material on its macroscopic deformation response is still one of the major problems in materials engineering. For materials characterized by elastic-plastic deformation responses, predictive computational models to characterize crystal-plasticity (CP) have been developed. However, due to their large demand of computational resources, CP simulations cannot be straightforwardly implemented in hierarchical computational models such as FE$^{2}$. This bottleneck intensifies the need for the development of macroscopic simulation tools that can…
Wehrenberg et. al. [Nature 550 496 (2017)] used ultrafast in situ x-ray diffraction at the LCLS x-ray free-electron laser facility to measure large lattice rotations resulting from slip and deformation twinning in shock-compressed laser-driven [110] fibre textured tantalum polycrystal. We employ a crystal plasticity finite element method model, with slip kinetics based closely on the isotropic dislocation-based Livermore Multiscale Model [Barton et. al., J. Appl. Phys. 109 (2011)], to analyse this experiment. We elucidate the link between the degree of lattice rotation and the kinetics of plas…
In this paper, compressive loading effects on the plasticity of Al-Cu alloy varying the crystal orientation of Al and alloying element (Cu) percentage are investigated using molecular dynamics approach. The alloying percentage of Cu are varied up to 10% in <001>, <110> and <111> crystal loading direction of Al. Our results indicate that the alloy nanopillar has highest first yielding strength and strain along <110> and <001> direction, respectively. Further, the dislocation density and dislocation interaction are studied to explain the compressive stress strain behavior of the alloy nanopillar…
In the present work, we propose a novel model coupling phase-field, dislocation density based plasticity and damage. The dislocation density governing equations are constructed based on evolutions of mobile and immobile dislocations. Mechanisms including dislocation multiplication, annihilation, mobile-immobile transfer due to dislocation interactions and block of interfaces are incorporated in the model. Especially, the "swallow-gap" problem surrounding the coarsened second phase, which often appears in dislocation and phase-field coupled simulations, is solved in the present model. Moreover,…
The mechanical properties of $β$-Sn single crystals have been systematically investigated using a combined methodology of micropillar tests and rate-dependent crystal plasticity modelling. The slip strength and rate sensitivity of several key slip systems within $β$-Sn single crystals have been determined. Consistency between the numerically predicted and experimentally observed slip traces has been shown for pillars oriented to activate single and double slip. Subsequently, the temperature-dependent, intermetallic-size-governing behaviour of a polycrystal $β$-Sn-rich alloy SAC305 (96.5Sn-3Ag-…
Sensitivity of grain-averaged elastic strain and orientation predictions on the mesh density and boundary conditions in crystal plasticity finite element simulations
The University of Alabama（阿拉巴马大学）；Mines Saint-Etienne（圣艾蒂安国立高等矿业学校）；The Pennsylvania State University（宾夕法尼亚州立大学）
