Carrier-Resolved Photo Hall Measurement in World-Record-Quality Perovskite and Kesterite Solar Absorbers
Oki Gunawan, Seong Ryul Pae, Douglas M. Bishop, Yun Seog Lee, Yudistira Virgus, Nam Joong Jeon, Jun Hong Noh, Xiaoyan Shao, Teodor Todorov, David B. Mitzi, Byungha Shin
备注：
13 pages, 3 figures, supplementary materials (15 pages) including link to Movie S1
Majority and minority carrier properties such as type, density and mobility represent fundamental yet difficult to access parameters governing semiconductor device performance, most notably solar cells. Obtaining this information simultaneously under light illumination would unlock many critical parameters such as recombination lifetime, recombination coefficient, and diffusion length; while deeply interesting for optoelectronic devices, this goal has remained elusive. We demonstrate here a new carrier-resolved photo-Hall technique that rests on a new identity relating hole-electron mobility difference ($Δμ$), Hall coefficient ($h$), and conductivity ($σ$): $Δμ=(2+d\ln h/d\ln σ)\,h\,σ$, and a rotating parallel dipole line ac-field Hall system with Fourier/lock-in detection for clean Hall signal measurement. We successfully apply this technique to recent world-record-quality perovskite and kesterite films and map the results against varying light intensities, demonstrating unprecedented simultaneous access to the above-mentioned parameters.
Various thin-film I$_2$-II-IV-VI$_4$ photovoltaic absorbers derived from kesterite Cu$_2$ZnSn(S,Se)$_4$ have been synthesized, characterized, and theoretically investigated in the past few years. The availability of this homogeneous materials dataset is an opportunity to examine trends in their defect properties and identify criteria to find new defect-tolerant materials in this vast chemical space. We find that substitutions on the Zn site lead to a smooth decrease in band tailing as the ionic radius of the substituting cation increases. Unfortunately, this substitution strategy does not ensu…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties of kesterite compounds. Direct bandgaps are reported with values of 1.32, 1.89 and 3.06 eV respectively for CZTS, CZGS and CZSS. In addition, absorption coefficient values of the order of $10^4$ cm$^{-1}$ are obtained, indicating the applicability of these materials as absorber layer for solar cell applications. In the second part of this study, ab initio re…
In kesterite CZTSSe solar cell research, an asymmetric crystallization profile is often obtained after annealing, resulting in a bilayered or double-layered absorber. So far, only segregated pieces of research exist to characterize this double layer, its formation dynamics and its effect on the performance of devices. Here, we review the existing research on double-layered kesterites and evaluate the different mechanisms proposed. Using a cosputtering-based approach, we show that the two layers can differ significantly in morphology, composition and optoelectronic properties, and complement th…
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of 12.6%. In this work, SnCl4 and SnCl2_2H2O are respectively used as tin precursor to investigate the Voc,def issue of dimethyl sulfoxide (DMSO) solution processed CZTSSe solar cells. Different complexations of tin compounds with thiourea and DMSO lead to different reaction pathways from solution to absorber material and thus dramatic difference in photovoltaic pe…
Cu2ZnSnS(e)4 (CZTS(e)) solar cells have attracted much attention due to the elemental abundance and the non-toxicity. However, the record efficiency of 12.6% for Cu2ZnSn(S,Se)4 (CZTSSe) solar cells is much lower than that of Cu(In,Ga)Se2 (CIGS) solar cells. One crucial reason is the recombination at interfaces. In recent years, large amount investigations have been done to analyze the interfacial problems and improve the interfacial properties via a variety of methods. This paper gives a review of progresses on interfaces of CZTS(e) solar cells, including: (1) the band alignment optimization a…
We demonstrate a non-destructive approach to provide structural properties on the grain level for the absorber layer of kesterite solar cells. Kesterite solar cells are notoriously difficult to characterize structurally due to the co-existence of several phases with very similar lattice parameters. Specifically, we present a comprehensive study of 597 grains in the absorber layer of a 1.64% efficient Cu2ZnSnS4 (CZTS) thin-film solar cell, from which 15 grains correspond to the secondary phase ZnS. By means of three dimensional X-ray diffraction (3DXRD), we obtained statistics for the phase, si…
Tin fluoride (SnF2) is an indispensable additive for high-efficiency Pb-Sn perovskite solar cells (PSCs). However, the spatial distribution of SnF2 in the perovskite absorber is seldom investigated while essential for a comprehensive understanding of the exact role of the SnF2 additive. Herein, we revealed the spatial distribution of SnF2 additive and made structure-optoelectronic properties-flexible photovoltaic performance correlation. We observed the chemical transformation of SnF2 to a fluorinated oxy-phase on the Pb-Sn perovskite film surface, due to its rapid oxidation. In addition, at t…
Intrinsic and extrinsic ion migration is a very large threat to the operational stability of perovskite solar cells and is difficult to completely eliminate due to the low activation energy of ion migration and the existence of internal electric field. We propose a heterojunction route to help suppress ion migration, thus improving the operational stability of the cell from the perspective of eliminating the electric field response in the perovskite absorber. A heavily doped p-type (p+) thin layer semiconductor is introduced between the electron transporting layer (ETL) and perovskite absorber…
Metal halide perovskites feature excellent absorption, emission and charge carrier transport properties. These materials are therefore very well suited for photovoltaics applications where there is a growing interest. Still, questions arise when looking at the unusual long carrier lifetime that, regarding the micrometric diffusion length, would imply a very low diffusion coefficient as compared to commonly used photovoltaic absorbers. In this paper, we provide an experimental insight into this long lifetime of charge carriers in slow-motion. Our approach relies on an improved model to analyze …
CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density functional theory (DFT) study using the Cambridge Serial Total Energy Package (CASTEP) code for the cubic CsPbI3 absorber to compare and evaluate its structural, electronic, and optical properties. The calculated electronic band gap (Eg) using the GGA-PBE approach of CASTEP was 1.483 eV for this CsPbI3 absorber. Moreover, the computed density of states (DOS) exhibit…
A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study of PSCs, while CuSbS2 was utilized as the hole transport layer (HTL). wxAMPS was used to validate the results of SCAPS simulations. Moreover, the first-principle density function theory (DFT) calculations were performed for validating the 1.6 eV bandgap of the Cs2TiBr6 absorber. To enhance the device performance, we analyzed and optimized various parameters…
Multilayer Screening of Double and Conventional Perovskite Solar Cells Using SCAPS-1D and Machine Learning: Optimization of ETL, HTL, and Absorber for High-Efficiency Architectures
Department of Physics, Iran University of Science and Technology（伊朗理工大学物理系）
Despite the exceeding 23\% photovoltaic efficiency achieved in organic-inorganic hybrid perovskite solar cells obtaining, the stable materials with desirable band gap are rare and are highly desired. With the aid of first-principles calculations, we predict a new promising family of nontoxic inorganic double perovskites (DPs), namely, silicon (Si)-based halides A$_{2}$SiI$_{6}$ (A = K, Rb, Cs; X = Cl, Br, I). This family containing the earth-abundant Si could be applied for perovskite solar cells (PSCs). Particularly A$_{2}$SiI$_{6}$ exhibits superb physical traits, including suitable band gap…
Lead halide-based perovskite thin films have attracted great attention due to the explosive increase in perovskite solar cell efficiencies. The same optoelectronic properties that make perovskites ideal absorber materials in solar cells are also beneficial in other light-harvesting applications and make them prime candidates as triplet sensitizers in upconversion via triplet-triplet annihilation in rubrene. In this contribution, we take advantage of long carrier lifetimes and carrier diffusion lengths in perovskite thin films, their high absorption cross sections throughout the visible spectru…
Perovskite solar cells have shown power conversion efficiencies (PCE) comparable to cystalline silicon solar cell despite involving low-temperature, solution based synthesis processes outside clean room environment. As the theoretical PCE of a perovskite solar cell with band gap 1.55 eV is capped to 33 % due to Shockley-Queisser limit, tandem configurations are being investigated to go beyond this limit. Here, we propose a two-terminal (2T) tandem solar cell structure consisting of perovskite and multilayer transition metal dichalcogenide as the absorber layers of the top and the bottom subcel…
Divergent Solid-state Conversion Pathways in Evaporated All-perovskite Tandem Solar Cells
Empa – Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科学与技术研究院）；Zurich University of Applied Sciences（苏黎世应用科学大学）；ETH Zürich（苏黎世联邦理工学院）
Capacitance measurements as a function of voltage, frequency and temperature are useful tools to identify fundamental parameters that affect solar cell operation. Techniques such as capacitance-voltage (CV), Mott-Schottky analysis and thermal admittance spectroscopy (TAS) measurements are therefore frequently employed to obtain relevant parameters of the perovskite absorber layer in perovskite solar cells. However, state-of-the-art perovskite solar cells employ thin electron and hole transport layers that improve contact selectivity. These selective contacts are often quite resistive in nature…
The most studied perovskite-based solar cells reported up to date contain the toxic lead in its composition. Photovoltaic research and development towards non-toxic, lead-free perovskite solar cells are critical to finding alternatives to reduce human health concerns associated with them. Bismuth-based perovskite variants, especially in the form of methylammonium bismuth iodide (MBI), is a good candidate for the non-toxic light absorber. However, the reported perovskite variant MBI thin flms prepared by the solution process so far suffers from poor morphology and surface coverage. In this work…
Although it has been recently demonstrated that the laser-assisted (LA) crystallization process leads to the formation of perovskite absorber films of superior photovoltaic performance compared to conventional thermal annealing (TA), the physical origin behind this important discovery is missing. In this study, CH$_3$NH$_3$PbI$_3$ perovskite thin films have been synthesized by means of LA and TA crystallization on the surface of two hole transport layers (HTL) namely poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and poly(triarylamine) (PTAA). A systematic study of the eff…
Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. By measuring the quasi-Fermi level splitting (QFLS) of perovskite/CTL heterojunctions, we quantify the non-radiative interfacial recombination current for a wide range of commonly used CTLs, including …
The same optical and electronic properties that make perovskite thin films ideal absorber materials in photovoltaic applications are also beneficial in photon upconversion devices. In this contribution, we investigate the rubrene-triplet sensitization by perovskite thin films based on methylammonium formamidinium lead triiodide (MAFA). To elucidate the role of trap states which affect the free carrier lifetimes, we fabricate MAFA perovskite thin films with three different thicknesses. By measuring the change in the photoluminescence properties under different excitation fluences, we find that …
Solution-processed, lead halide-based perovskite solar cells have overcome important challenges over the recent years, offering low-cost and high solar power conversion efficiencies. However, they still undergo unoptimized light collection due mainly to the thin (~350 nm) polycrystalline absorber layers. Moreover, their high toxicity (due to the presence of lead in the perovskite crystalline structure) makes it necessary that the thickness of the absorber layers to be further reduced, for their future commercialization, without reducing the device performance. Here we aim to address these issu…
Vacancy-ordered double perovskites K2SnX6 (X = I, Br, Cl) attract significant research interest due to their potential application as light-absorbing materials in perovskite solar cells. However, a deep insight into their material properties at the atomic scale is yet scarce. Here we present a systematic investigation on their structural, electronic, optical properties and phase stabilities in cubic, tetragonal, and monoclinic phases based on density functional theory calculations. Quantitatively reliable prediction of lattice constants, band gaps, effective masses of charge carriers, exciton …
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufacturing, MHPs-based solar cells have become the fastest-advancing photovoltaic technology. In this regard, much of the recent work has been dominated by absorber materials based on methylammonium MHPs, …
Tandem perovskite solar cells beckon as lower cost alternatives to conventional single junction solar cells, with all-perovskite tandem photovoltaic architectures showing power conversion efficiencies up to 26.4%. Solution-processing approaches for the perovskite layers have enabled rapid 2optimization of perovskite solar technologies, but new deposition routes are necessary to enable modularity and scalability, facilitating further efficiency improvements and technology adoption. Here, we utilise a 4-source vacuum deposition method to deposit FA$_{0.7}$ Cs$_{0.3}$Pb(I$_x$Br$_{1-x}$)$_3$ perov…
The long-term stability of halide perovskite solar cells (PSCs) remains the critical problem of this photovoltaic technology. Different structural defects formed in the thin-film perovskite films were considered as a main trigger for the decomposition of the absorber and corrosion of the interfaces in the device structure. The changes in the stability performance of the PSCs require a detailed analysis of the defects generated under external stress (light and heat). Using admittance, deep-level transient spectroscopy (DLTS) and reverse DLTS we determined the evolution of the defect energy leve…
Owing to their exceptional semiconducting properties, hybrid inorganic-organic perovskites show great promise as photovoltaic absorbers. In these materials, long-range diffusion of charge carriers allows for most of the photogenerated carriers to contribute to the photovoltaic efficiency. Here, time-resolved photoluminescence (PL) microscopy is used to directly probe ambipolar carrier diffusion and recombination kinetics in hybrid perovskites. This technique is applied to thin films of methylammonium lead tri-iodide MAPbI$_3$ obtained with two different fabrication routes, methylammonium lead …
A direct, camera-based implied open-circuit voltage (iVOC) imaging method via the novel use of a single bandpass filter (s-BPF) is developed for large-area photovoltaic solar cells and solar cell precursors. This method images the photoluminescence (PL) emission using a narrow BPF with centre energy in the high-energy tail of the PL emission taking advantage of the close-to-unity absorptivity of typical photovoltaic devices with low variability in this energy range. As a result, the exact value of the sample's absorptivity within the BPF transmission band is not required. The use of a s-BPF en…
In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural stability, optical responses, and electronic contribution of the constituent elements in Cs2BiAgI6 absorber material, where SCAPS-1D and wxAMPS simulators are used to scrutinize different configurations of Cs2BiAgI6 solar cells. Here, PCBM, ZnO, TiO2, C60, IGZO, SnO2, WS2, and CeO2 are used as ETL, and Cu2O, CuSCN, CuSbS2, NiO, P3HT, PEDOT: PSS, Spiro-MeOTAD, CuI, Cu…
One of the main challenges for perovskite solar cells (PSC) is their stability, due to environment-induced perovskite decomposition. The resulting decomposition compounds are mobile and may, therefore, react with charge carrier extraction layers or the contact metallization, in addition to enhancing the recombination rate in the absorber layer. In this contribution, the influence of different contact metallization layers, such as aluminum (Al), silver (Ag), gold (Au) and nickel (Ni) on the storage stability of inverted planar methylammonium lead iodide (MAPI)-based perovskite solar cells witho…
All-perovskite tandem solar cells promise high photovoltaic performance at low cost. So far however, their efficiencies cannot compete with traditional inorganic multi-junction solar cells and they generally underperform in comparison to what is expected from the isolated single junction devices. Understanding performance losses in all-perovskite tandem solar cells is a crucial aspect that will accelerate advancement. Here, we perform extensive selective characterization of the individual sub-cells to disentangle the different losses and limiting factors in these tandem devices. We find that n…
Fundamental working mechanisms of perovskite solar cells remain an elusive topic of research. Impedance Spectroscopy (IS) application to perovskite-based devices generates uncommon features and misleading outputs, mainly due to the lack of a stablished model for the interpretation of the results. In this work we control the perovskite precursor concentration to fabricate a series of perovskite-based solar cells with different amounts of perovskite absorber. Low concentration devices present the well-known dye sensitized solar cell (DSSCs) impedance pattern. As the amount of perovskite is incre…
The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency cells, a more rigorous approach is necessary. Here, we have established a new formalism that can accurately predict absolute performance limits of solar cells in conventional thin film form. In particular, we have estimated the maximum efficiencies of 13 well-studied solar cell materials [GaAs, InP, CdTe, a-Si:H, CuInSe2, CuGaSe2, CuInGaSe2, Cu2ZnSnSe4, Cu2ZnSn…
Utilizing hot carriers is the crucial approach for solar cell to exceed the thermodynamic detailed balance limit, yet effective extraction of hot carriers in absorber materials via most commonly used semiconductor acceptors has been a challenge in both materials and photophysics research for many years. Herein, we build series of CsPbI3 quantum dot and fullerene derivative systems to explore the decisive factors of this process and have for the first time realized efficient hot carrier extraction in these systems (maximum extraction efficiency ~ 84%). We find building the systems as state-coup…
Bandgap Engineering for Efficient Perovskite Solar Cells Under Multiple Color Temperature Indoor Lighting
King Abdulaziz City for Science and Technology (KACST)（沙特阿拉伯国王科学技术城）；College of Engineering, King Saud University（沙特国王大学工程学院）；Institute of Electronic Structure and Laser (IESL), Foundation for Research and Technology – Hellas (FORTH)（希腊研究与技术基金会电子结构与激光研究所）；Energy, Industry, and Advanced Technologies Research Center, Taibah University（塔伊巴大学能源、工业与先进技术研究中心）；Department of Electrical Engineering, College of Engineering, Taibah University（塔伊巴大学电气工程系）；Department of Electrical & Computer Engineering, Hellenic Mediterranean University (HMU)（希腊地中海大学电气与计算机工程系）；Physics and Astronomy Department, College of Science, King Saud University（沙特国王大学理学院物理与天文学系）；Department of Electronic Engineering, School of Engineering, Hellenic Mediterranean University（希腊地中海大学工程学院电子工程系）；Department of Materials Science and Engineering, University of Crete（克里特大学材料科学与工程系）；King Abdullah Institute for Nanotechnology, King Saud University（沙特国王大学阿卜杜拉国王纳米技术研究所）
Time-resolved, pulsed excitation methods are widely used to deduce optoelectronic properties of semiconductors, including now also Halide Perovskites (HaPs), especially transport properties. Howev-er, as yet no evaluation of their amenability and justification for the use of the results for the above-noted purposes has been reported. To check if we can learn from pulsed measurement results about steady-state phototransport properties, we show here that, although pulsed measurements can be useful to extract information on the recombination kinetics of HaPs, great care should be taken. One issue…
Charge selective interlayers are crucial in thin-film photovoltaics, such as organic and Perovskite solar cells. Charge transporting layers (doped and undoped) constitute perhaps the most important class of charge selective interlayers; however, it is not well understood how a charge transporting layer should be designed in order to ensure efficient extraction of majority carriers while blocking minority carriers. This work clarifies how well charge-transporting layers with varying majority carrier conductivities block minority carriers. We use the Charge Extraction by a Linearly Increasing Vo…
