In this letter we investigate the effect of boxy/peanut (b/p) bulges on bar-induced gas inflow to the central kiloparsec, which plays a crucial role on the evolution of disc galaxies. We carry out hydrodynamic gas response simulations in realistic barred galaxy potentials, including or not the geometry of a b/p bulge, to investigate the amount of gas inflow induced in the different models. We find that b/p bulges can reduce the gas inflow rate to the central kiloparsec by more than an order of magnitude, which leads to a reduction in the amount of gas available in the central regions. We also investigate the effect of the dark matter halo concentration on these results, and find that for maximal discs, the effect of b/p bulges on gas inflow remains significant. The reduced amount of gas reaching the central regions due to the presence of b/p bulges could have significant repercussions on the formation of discy- (pseudo-) bulges, on the amount of nuclear star formation and feedback, on the fuel reservoir for AGN activity, and on the overall secular evolution of galaxies.
Bars have a complex three-dimensional shape. In particular their inner part is vertically much thicker than the parts further out. Viewed edge-on, the thick part of the bar is what is commonly known as a boxy-, peanut- or X- bulge and viewed face-on it is referred to as a barlens. These components are due to disc and bar instabilities and are composed of disc material. I review here their formation, evolution and dynamics, using simulations, orbital structure theory and comparisons to observations.
We analyse the distribution of Mira variable stars in the central region of the Milky Way. We find that with increasing period, i.e. decreasing age, the Miras shift towards negative Galactic longitudes $\ell$. Comparing to a cosmological zoom simulation of a barred galaxy, we find that this shift with age can be explained by an age-morphology dependence of the boxy peanut/bulge. Owing to a combination of projection effects and the limitation of the range of Galactic longitudes, the near hump at $\ell>0$ is more truncated for younger populations, and the far hump at $\ell<0$ dominates the obser…
We analyse the positions of RR Lyrae stars in the central region of the Milky Way. In addition to the overall bar shape detected previously, we find evidence for a peanut shaped structure, in form of overdensities near $\ell=-2$ deg and $1$ deg at $b\sim-3.5$ deg. The corresponding physical distance between the two peaks of the peanut is $\sim0.7$ kpc, significantly shorter than that found from near-IR images (3.3 kpc) and red-clump stars. Qualitatively this is expected from `fractionation' of bar orbits, which we demonstrate to be matched in a simulation of an inside-out growing disc subseque…
We study the imprints of boxy/peanut structures on the 2D line-of-sight kinematics of simulated disk galaxies. The models under study belong to a family with varying initial gas fraction and halo triaxiality, plus few other control runs with different structural parameters; the kinematic information was extracted using the Voronoi-binning technique and parametrised up to the fourth order of a Gauss-Hermite series. Building on a previous work for the long-slit case, we investigate the 2D kinematic behaviour in the edge-on projection as a function of the boxy/peanut strength and position angle; …
We present SAURON integral-field observations of a sample of 12 mid to high-inclination disk galaxies, to unveil hidden bars on the basis of their kinematics, i.e., the correlation between velocity and h3 profiles, and to establish their degree of cylindrical rotation. For the latter, we introduce a method to quantify cylindrical rotation that is robust against inner disk components. We confirm high-levels of cylindrical rotation in boxy/peanut bulges, but also observe this feature in a few galaxies with rounder bulges. We suggest that these are also barred galaxies with end-on orientations. R…
It is well established that bars evolve significantly after they form in galaxy discs, often changing shape both in and out of the disc plane. In some cases they may bend or buckle out of the disc plane resulting in the formation of boxy/peanut/x-shape bulges. In this paper we show that the dark matter halo shape affects bar formation and buckling. We have performed N-body simulations of bar buckling in non-spherical dark matter halos and traced bar evolution for 8 Gyr. We find that bar formation is delayed in oblate halos, resulting in delayed buckling whereas bars form earlier in prolate hal…
Some barred galaxies, including the Milky Way, host a boxy/peanut/X-shaped bulge (BPX-shaped bulge). Previous studies suggested that the BPX-shaped bulge can either be developed by bar buckling or by vertical inner Lindblad resonance (vILR) heating without buckling. In this paper, we study the observable consequence of an BPX-shaped bulge built up quickly after bar formation via vILR heating without buckling, using an N-body/hydrodynamics simulation of an isolated Milky Way-like galaxy. We found that the BPX-shaped bulge is dominated by stars born prior to bar formation. This is because the ba…
We review the observed morphological, photometric, and kinematic properties of boxy/peanut (B/P) shape bulges. Nearly half of the bulges in the nearby edge-on galaxies have these characteristics, which fraction is similar to the observed bar fraction in Hubble types earlier than Scd. B/P bulges are generally detected in the edge-on view, but it has been recently demonstrated that barlenses, which are lens-like structures embedded in bars, are the more face-on counterparts of the B/P bulges. Multi-component structural decompositions have shown that B/P/barlens structures are likely to account f…
Barred galaxies have interesting morphological features whose presence and properties set constraints on galactic evolution. Here we examine barlenses, i.e. lens-like components whose extent along the bar major axis is shorter than that of the bar and whose outline is oval or circular. We identify and analyse barlenses in $N$-body plus SPH simulations, compare them extensively with those from the NIRS0S (Near-IR S0 galaxy survey) and the S$^4$G samples (Spitzer Survey of Stellar Structure in Galaxies) and find very good agreement. We observe barlenses in our simulations from different viewing …
We examine the effects that the modelling of a Boxy/Peanut (B/P) bulge will have on the estimates of the stellar gravitational potential, forces, orbital structure and bar strength of barred galaxies. We present a method for obtaining the potential of disc galaxies from surface density images, assuming a vertical density distribution (height function), which is let to vary with position, thus enabling it to represent the geometry of a B/P. We construct a B/P height function after the results from a high-resolution, N-body+SPH simulation of an isolated galaxy and compare the resulting dynamical…
We study the colors and orientations of structures in low and intermediate inclination barred galaxies. We test the hypothesis that barlenses, roundish central components embedded in bars, could form a part of the bar in a similar manner to boxy/peanut bulges in the edge-on view. A sample of 79 barlens galaxies was selected from the S$^4$G and the NIRS0S surveys. The sizes, ellipticities, and orientations of barlenses were measured and used to define the barlens regions in the color measurements. The orientations of barlenses were studied with respect to those of the "thin bars" and the line-o…
Morphological characteristics of the vertically thick inner bar components are studied. At high galaxy inclinations they manifest as Boxy/Peanut/X-shape features, and near to face-on view as barlenses. Using the Spitzer Survey of Stellar Structure in Galaxies (S4G) and the Near-IR S0 galaxy Survey (NIRS0S), we compared the properties of 88 X-shape features, 85 barlenses, and the photometric bulges of 41 non-barred galaxies. Sizes and minor-to-major axis ratios (b/a) of these structures are compared, and interpreted by means of synthetic images using N-body simulation models. Barlenses and thei…
Boxy/peanut bulges are considered to be part of the same stellar structure as bars and both could be linked through the buckling instability. The Milky Way is our closest example. The goal of this letter is determining if the mass assembly of the different components leaves an imprint in their stellar populations allowing to estimate the time of bar formation and its evolution. To this aim we use integral field spectroscopy to derive the stellar age distributions, SADs, along the bar and disc of NGC 6032. The analysis shows clearly different SADs for the different bar areas. There is an underl…
From a sample of 84 local barred, moderately inclined disc galaxies, we determine the fraction which host boxy or peanut-shaped (B/P) bulges (the vertically thickened inner parts of bars). We find that the frequency of B/P bulges in barred galaxies is a very strong function of stellar mass: 79% of the bars in galaxies with log (M_{star}/M_{sun}) >~ 10.4 have B/P bulges, while only 12% of those in lower-mass galaxies do. (We find a similar dependence in data published by Yoshino & Yamauchi 2015 for edge-on galaxies.) There are also strong trends with other galaxy parameters -- e.g., Hubble type…
We study the dynamical mechanisms that reinforce the formation of boxy structures in the \textit{inner} regions, roughly in the middle, of bars observed nearly \textit{face-on}. Outer boxiness, at the ends of the bars, is usually associated with orbits at the inner, radial 4:1 resonance region and can be studied with 2D dynamics. However, in the middle of the bar dominate 3D orbits that give boxy/peanut bulges in the edge-on views of the models. In the present paper we show that 3D quasi-periodic, as well as 3D chaotic orbits sticky to the x1v1 and x1v1$^{\prime}$ tori, especially from the Inn…
Vertically thickened bars, observed in the form of boxy/peanut (B/P) bulges, are found in the majority of massive barred disc galaxies in the local Universe, including our own. B/P bulges indicate that their host bars have suffered violent bending instabilities driven by anisotropic velocity distributions. We investigate for the first time how the frequency of B/P bulges in barred galaxies evolves from $z = 1$ to $z\approx 0$, using a large sample of non-edge-on galaxies with masses $M_{\star} > 10^{10}\:M_{\odot}$, selected from the HST COSMOS survey. We find the observed fraction increases f…
We use stellar dynamical bulge/disk/halo simulations to study whether barlenses (lens-like structures embedded in the narrow bar component) are just the face-on counterparts of Boxy/Peanut/X-shapes (B/P/X) seen in edge-on bars, or if some additional physical parameter affects that morphology. A range of bulge-to-disk mass and size ratios are explored: our nominal parameters ($B/D=0.08$, $r_{\rm eff}/h_r=0.07$, disk comprising 2/3 of total force at $2.2h_r$) correspond to typical MW mass galaxies. In all models a bar with pronounced B/P/X forms in a few Gyrs, visible in edge-on view. However, t…
We investigate whether the formation mechanism of boxy and peanut-shaped (B/PS) bulges could depend on the gas content of the galaxy. We have performed N-body simulations with and without a gaseous component. In the second case star formation/feedback recipes have also been implemented to create new stellar populations. As in many previous studies, in our N-body collisionless simulation, the B/PS is due to the classical break in the z mirror symmetry lasting roughly 200 Myr. When a gaseous component and star formation recipes are added to the simulation, the bulge-growing mechanism is quite di…
We explore trends in the morphology and line-of-sight (los) velocity of stellar populations in the inner regions of disc galaxies, using N-body simulations with both a thin (kinematically cold) and a thick (kinematically hot) disc which form a bar and boxy/peanut (b/p) bulge. The bar in the thin disc component is $\sim$50\% stronger than the thick disc bar and is more elongated, with an axis ratio almost half that of the thick disc bar. The thin disc b/p bulge has a pronounced X-shape, while the thick disc b/p is weaker with a rather boxy shape. This leads to the signature of the b/p bulge in …
By means of idealized, dissipationless N-body simulations which follow the formation and subsequent buckling of a stellar bar, we study the characteristics of boxy/peanut-shaped bulges and compare them with the properties of the stellar populations in the Milky Way bulge. The main results of our modeling, valid for the general family of boxy/peanut shaped bulges, are the following: (i) because of the spatial redistribution in the disk initiated at the epoch of bar formation, stars from the innermost regions to the outer Lindblad resonance of the stellar bar are mapped into a boxy bulge; (ii) t…
Boxy/peanut bulges are believed to originate from galactic discs through secular processes. A little explored question is how this evolution would be modified if the initial disc was assembled around a preexisting classical bulge. Previously we showed that a low-mass initial classical bulge (ICB), as might have been present in Milky Way-like galaxies, can spin up significantly by gaining angular momentum from a bar formed through disc instability. Here we investigate how the disc instability and the kinematics of the final boxy/peanut (BP) bulge depend on the angular momentum of such a low-mas…
Bar Evolution in Edge-on Galaxies: A Demographic Study of Boxy/Peanut Bulges
Indian Institute of Science Education and Research, Bhopal（印度科学教育研究所博帕尔分校）；Universidad Andrés Bello（安德烈斯贝略大学）；Indian Institute of Astrophysics（印度天体物理研究所）
The investigation of the phase-space properties of structures encountered in a dynamical system is essential for understanding their formation and enhancement. In the present paper we explore the phase space in energy intervals where we have orbits that act as building blocks for boxy-peanut (b/p) and "{\sf X}-shaped" structures in rotating potentials of galactic type. We underline the significance of the rotational tori around the 3D families x1v1 and x1v1$^{\prime}$ that have been bifurcated from the planar x1 family. These tori play a multiple role: (i) They belong to quasi-periodic orbits …
Applying spectral dynamics methods to one typical $N$-body model with a barlens, we dissect the modelled bar into separate components supported by completely different types of orbits. We identify at least four components: a narrow elongated bar, a boxy bar, and two components contributing to the barlens. We analyse the vertical structure of all components that make up the thick part of the bar, which has a boxy/peanut shape (B/P bulge). We show that the `peanut' shape is mainly due to the orbits that assemble the boxy part of the face-on bar. We associate the X-shape with the narrow and elong…
Based on the spectral analysis of individual orbits of stars from different $N$-body models, we show that the face-on morphology of the so-called `face-on peanut' bars (boxy bars) and barlenses is supported by different types of orbits. For `face-on peanut' bars, the so-called boxy orbits come to the fore, and they are responsible for the unusual morphology of the bar in the central regions. In the models with compact bulges, the bars show a barlens morphology in their central parts. We found that the barlens supporting orbits come in two types, one of which gives a square-like shape and the o…
Numerical simulations have shown that the X-shaped structure in the Milky Way bulge can naturally arise from the bar instability and buckling instability. To understand the influence of the buckling amplitude on the morphology of the X-shape, we analyze three self-consistent numerical simulations of barred galaxies with different buckling amplitudes (strong, intermediate and weak). We derive the three-dimensional density with an adaptive kernel smoothing technique. The face-on iso-density surfaces are all elliptical, while in the edge-on view, the morphology of buckled bars transitions with in…
Bar driven secular evolution plays a key role in changing the morphology and kinematics of disk galaxies, leading to the formation of rapidly rotating boxy/peanut bulges. If these disk galaxies also hosted a preexisting classical bulge, how would the secular evolution influence the classical bulge, and also the observational properties. We first study the co-evolution of a bar and a preexisting non-rotating low-mass classical bulge such as might be present in galaxies like the Milky Way. It is shown with N-body simulations that during the secular evolution, such a bulge can gain significant an…
Boxy and peanut-shaped bulges are seen in about half of edge-on disc galaxies. Comparisons of the photometry and major-axis gas and stellar kinematics of these bulges to simulations of bar formation and evolution indicate that they are bars viewed in projection. If the properties of boxy bulges can be entirely explained by assuming they are bars, then this may imply that their hosts are pure disc galaxies with no classical bulge. A handful of these bulges, including that of the Milky Way, have been observed to rotate cylindrically, i.e. with a mean stellar velocity independent of height above …
We used the new ESO VLT instrument MUSE to obtain spectral and imaging coverage of NGC 4710. The wide area and excellent sampling of the MUSE integral field spectrograph allows us to investigate the dynamical properties of the X-shaped bulge of NGC 4710 and compare it with the properties of the Milky Way's own X-shaped bulge. We measured the radial velocities, velocity dispersion, and stellar populations using a penalized pixel full spectral fitting technique adopting simple stellar populations models, on a 1' x 1' area centred on the bulge of NGC 4710. We have constructed the velocity maps of…
Bulges of edge-on galaxies are often boxy/peanut-shaped (B/PS), and unsharp masks reveal the presence of an X shape. Simulations show that these shapes can be produced by dynamical processes driven by a bar which vertically thickens the centre. In the Milky Way, which contains such a B/PS bulge, the X-shaped structure is traced by the metal-rich stars but not by the metal-poor ones. Recently Debattista et al. (2016) interpreted this property as a result of the varying effect of the bar on stellar populations with different starting kinematics. This kinematic fractionation model predicts that c…
We continue the analysis of the dataset of our spectroscopic observation campaign of M31, by deriving simple stellar population properties (age metallicity and alpha-elements overabundance) from the measurement of Lick/IDS absorption line indices. We describe their two-dimensional maps taking into account the dust distribution in M31. 80\% of the values of our age measurements are larger than 10 Gyr. The central 100 arcsec of M31 are dominated by the stars of the classical bulge of M31. They are old (11-13 Gyr), metal-rich (as high as [Z/H]~0.35 dex) at the center with a negative gradient outw…
The Milky Way bulge has a boxy/peanut morphology and an X-shaped structure. This X-shape has been revealed by the `split in the red clump' from star counts along the line of sight toward the bulge, measured from photometric surveys. This boxy, X-shaped bulge morphology is not unique to the Milky Way and such bulges are observed in other barred spiral galaxies. N-body simulations show that boxy and X-shaped bulges are formed from the disk via dynamical instabilities. It has also been proposed that the Milky Way bulge is not X-shaped, but rather, the apparent split in the red clump stars is a co…
Cosmological simulations show that dark matter halos surrounding baryonic disks have a wide range of angular momenta, measured by the spin parameter ($λ$). In this study, we bring out the importance of inner angular momentum($<$30 kpc), measured in terms of the halo spin parameter, on the secular evolution of the bar using N-body simulations. We have varied the halo spin parameter $λ$ from 0 to 0.1 for co-rotating (prograde) spinning halos and one counter-rotating (retrograde) halo spin ($λ$=-0.1) with respect to the disk. We report that as the halo spin increases, the buckling is also trigger…
The stellar populations in the inner kiloparsecs of the Milky Way (MW) show complex kinematical and chemical structures. The origin and evolution of these structures is still under debate. Here we study the central region of a fully cosmological hydrodynamical simulation of a disk galaxy that reproduces key properties of the inner kiloparsecs of the MW: it has a boxy morphology and shows an overall rotation and dispersion profile in agreement with observations. We use a clustering algorithm on stellar kinematics to identify a number of discrete kinematic components: a high- and low-spin disk, …
We show for the first time, that a fully cosmological hydrodynamical simulation can reproduce key properties of the innermost region of the Milky Way. Our high resolution simulation matches the profile and kinematics of the Milky Way's boxy/peanut-shaped bulge, and hence we can use it to reconstruct and understand the bulge assembly. In particular, the age dependence of the X-shape morphology of the simulated bulge parallels the observed metallicity dependent split in the red clump stars of the inner Galaxy. We use this feature to derive an observational metric that allows us to quantify when …
The center of our disk galaxy, the Milky Way, is dominated by a boxy/peanut-shaped bulge. Numerous studies of the bulge based on stellar photometry have concluded that the bulge stars are exclusively old. The perceived lack of young stars in the bulge strongly constrains its likely formation scenarios, providing evidence that the bulge is a unique population that formed early and separately from the disk. However, recent studies of individual bulge stars using the microlensing technique have reported that they span a range of ages, emphasizing that the bulge may not be a monolithic structure. …
Short (inner) bars of sub-kiloparsec radius have been hypothesized to be an important mechanism for driving gas inflows to small scales, thus feeding central black holes. Recent numerical simulations have shown that the growth of central black holes in galaxies can destroy short bars, when the black hole reaches a mass of $\sim 0.1\%$ of the total stellar mass of the galaxy. We study $N$-body simulations of galaxies with single and double bars to track the long-term evolution of the central stellar mass distribution. We find that the destruction of the short bar contributes significantly to th…
The existence of a classical bulge in disk galaxies holds important clue to the assembly history of galaxies. Finding observational evidence of very low mass classical bulges particularly in barred galaxies including our Milky Way, is a challenging task as the bar driven secular evolution might bring significant dynamical change to these bulges alongside the stellar disk. Using high-resolution N-body simulation, we show that if a cool stellar disk is assembled around a non-rotating low-mass classical bulge, the disk rapidly grows a strong bar within a few rotation time scales. Later, the bar d…
Gas morphology and kinematics in the Milky Way contain key information for understanding the formation and evolution of our Galaxy. We present a high resolution hydrodynamical simulation based on a realistic barred Milky Way potential constrained by recent observations. Our model can reproduce most features in the observed longitude-velocity diagram, including the Central Molecular Zone, the Near and Far 3-kpc arms, the Molecular Ring, and the spiral arm tangents. It can also explain the non-circular motions of masers obtained by the recent BeSSeL2 survey. The central gas kinematics are consis…
Galaxy flybys are as common as mergers in low redshift universe and are important for galaxy evolution as they involve the exchange of significant amounts of mass and energy. In this study we investigate the effect of minor flybys on the bulges, disks, and spiral arms of Milky Way mass galaxies for two types of bulges - classical bulges and boxy/peanut pseudobulges. Our N-body simulations comprise of two disk galaxies of mass ratios 10:1 and 5:1, where the disks of the galaxies lie in their orbital plane and the pericenter distance is varied. We performed photometric and kinematic bulge-disk d…
By using $N$-body and hydro simulations, we study the formation and evolution of bars in galaxies with significant gas content focusing on the phenomenon of the buckling instability. The galaxies are initially composed of a spherical dark matter halo and only stellar, or stellar and gaseous, disks with parameters that are similar to the Milky Way and are evolved for 10 Gyr. We consider different values of the gas fraction $f =0-0.3$ and in order to isolate the effect of the gas, we kept the fraction constant during the evolution by not allowing the gas to cool and form stars. The stellar bars …
(Abridged) We study the incidence, as well as the nature, of composite bulges in a sample of 10 face-on barred galaxies to constrain the formation and evolutionary processes of the central regions of disk galaxies. We analyze the morphological, photometric, and kinematic properties of each bulge. Then, by using a case-by-case analysis we identify composite bulges and classify every component into a classical or pseudobulge. In addition, bar-related boxy/peanut (B/P) structures were also identified and characterised. We find only three galaxies hosting a single-component bulge (two pseudobulges…
We demonstrate that growth of stellar bars in spinning dark matter halos is heavily suppressed in the secular phase of evolution, using numerical simulations of isolated galaxies. In a representative set of models, we show that for values of the cosmological spin parameter lambda > 0.03, bar growth (in strength and size) becomes increasingly quenched. Furthermore, slowdown of bar pattern speed weakens substantially with increasing `lambda,' until it ceases completely. The terminal structure of bars is affected as well, including extent and shape of their boxy/peanut bulges. The essence of this…
We analyse the output of the hi-res cosmological zoom-in simulation ErisBH to study self-consistently the formation of a strong stellar bar in a Milky Way-type galaxy and its effect on the galactic structure, on the central gas distribution and on star formation. The simulation includes radiative cooling, star formation, SN feedback and a central massive black hole which is undergoing gas accretion and is heating the surroundings via thermal AGN feedback. A large central region in the ErisBH disk becomes bar-unstable after z~1.4, but a clear bar-like structure starts to grow significantly only…
We present a new zoom-in hydrodynamical simulation, "Erisbh", which follows the cosmological evolution and feedback effects of a supermassive black hole at the center of a Milky Way-type galaxy. ErisBH shares the same initial conditions, resolution, recipes of gas cooling, star formation and feedback, as the close Milky Way-analog "Eris", but it also includes prescriptions for the formation, growth and feedback of supermassive black holes. We find that the galaxy's central black hole grows mainly through mergers with other black holes coming from infalling satellite galaxies. The growth by gas…
Using N-body simulations, we study the properties of a bar induced in a dwarf galaxy as a result of tidal interaction with the Milky Way. The dwarf is initially composed of a disk embedded in a dark matter halo and we follow its evolution on a typical orbit for 10 Gyr. It undergoes an evolution typical of tidally stirred dwarf galaxies: it loses mass, the stellar component transforms from a disk to a spheroid and the rotation of the stars is partially replaced by random motions. A tidally induced bar forms at the first pericentre passage and survives until the end of the evolution. Fourier dec…
