We investigate whether the formation mechanism of boxy and peanut-shaped (B/PS) bulges could depend on the gas content of the galaxy. We have performed N-body simulations with and without a gaseous component. In the second case star formation/feedback recipes have also been implemented to create new stellar populations. As in many previous studies, in our N-body collisionless simulation, the B/PS is due to the classical break in the z mirror symmetry lasting roughly 200 Myr. When a gaseous component and star formation recipes are added to the simulation, the bulge-growing mechanism is quite different. The young stellar population that is born in the thin gaseous disc rapidly populates vertical resonant orbits triggered by the combined effects of the linear horizontal and vertical ILRs. This leads to a B/PS bulge mainly made of stellar material younger than the surrounding population. The non-linear analysis of the orbital structure shows that the main orbit family responsible for the B/PS is not the same in the two cases. The 2:2:1 orbits prevail in the collisionless simulation whereas additional asymmetrical families contribute to the B/PS if a dissipative component is present and can form new stars. We found that 2:3:1 and 2:5:1 orbits trap a significant fraction of the mass. A flat ringed discy stellar component also appears simultaneously with the thickening of the young population. It is due to the star formation in a nuclear gaseous disc located in the central kpc, inside the ILR, and accumulated there by the torques exerted by the large-scale bar. Remarkably, it remains flat throughout the simulation although it develops a nuclear bar, leading to a double-barred galaxy. We predict that two populations of B/PS bulges could exist and even coexist in the same galaxy.
Bars have a complex three-dimensional shape. In particular their inner part is vertically much thicker than the parts further out. Viewed edge-on, the thick part of the bar is what is commonly known as a boxy-, peanut- or X- bulge and viewed face-on it is referred to as a barlens. These components are due to disc and bar instabilities and are composed of disc material. I review here their formation, evolution and dynamics, using simulations, orbital structure theory and comparisons to observations.
We analyse the distribution of Mira variable stars in the central region of the Milky Way. We find that with increasing period, i.e. decreasing age, the Miras shift towards negative Galactic longitudes $\ell$. Comparing to a cosmological zoom simulation of a barred galaxy, we find that this shift with age can be explained by an age-morphology dependence of the boxy peanut/bulge. Owing to a combination of projection effects and the limitation of the range of Galactic longitudes, the near hump at $\ell>0$ is more truncated for younger populations, and the far hump at $\ell<0$ dominates the obser…
We analyse the positions of RR Lyrae stars in the central region of the Milky Way. In addition to the overall bar shape detected previously, we find evidence for a peanut shaped structure, in form of overdensities near $\ell=-2$ deg and $1$ deg at $b\sim-3.5$ deg. The corresponding physical distance between the two peaks of the peanut is $\sim0.7$ kpc, significantly shorter than that found from near-IR images (3.3 kpc) and red-clump stars. Qualitatively this is expected from `fractionation' of bar orbits, which we demonstrate to be matched in a simulation of an inside-out growing disc subseque…
We study the imprints of boxy/peanut structures on the 2D line-of-sight kinematics of simulated disk galaxies. The models under study belong to a family with varying initial gas fraction and halo triaxiality, plus few other control runs with different structural parameters; the kinematic information was extracted using the Voronoi-binning technique and parametrised up to the fourth order of a Gauss-Hermite series. Building on a previous work for the long-slit case, we investigate the 2D kinematic behaviour in the edge-on projection as a function of the boxy/peanut strength and position angle; …
We present SAURON integral-field observations of a sample of 12 mid to high-inclination disk galaxies, to unveil hidden bars on the basis of their kinematics, i.e., the correlation between velocity and h3 profiles, and to establish their degree of cylindrical rotation. For the latter, we introduce a method to quantify cylindrical rotation that is robust against inner disk components. We confirm high-levels of cylindrical rotation in boxy/peanut bulges, but also observe this feature in a few galaxies with rounder bulges. We suggest that these are also barred galaxies with end-on orientations. R…
In this letter we investigate the effect of boxy/peanut (b/p) bulges on bar-induced gas inflow to the central kiloparsec, which plays a crucial role on the evolution of disc galaxies. We carry out hydrodynamic gas response simulations in realistic barred galaxy potentials, including or not the geometry of a b/p bulge, to investigate the amount of gas inflow induced in the different models. We find that b/p bulges can reduce the gas inflow rate to the central kiloparsec by more than an order of magnitude, which leads to a reduction in the amount of gas available in the central regions. We also …
It is well established that bars evolve significantly after they form in galaxy discs, often changing shape both in and out of the disc plane. In some cases they may bend or buckle out of the disc plane resulting in the formation of boxy/peanut/x-shape bulges. In this paper we show that the dark matter halo shape affects bar formation and buckling. We have performed N-body simulations of bar buckling in non-spherical dark matter halos and traced bar evolution for 8 Gyr. We find that bar formation is delayed in oblate halos, resulting in delayed buckling whereas bars form earlier in prolate hal…
Some barred galaxies, including the Milky Way, host a boxy/peanut/X-shaped bulge (BPX-shaped bulge). Previous studies suggested that the BPX-shaped bulge can either be developed by bar buckling or by vertical inner Lindblad resonance (vILR) heating without buckling. In this paper, we study the observable consequence of an BPX-shaped bulge built up quickly after bar formation via vILR heating without buckling, using an N-body/hydrodynamics simulation of an isolated Milky Way-like galaxy. We found that the BPX-shaped bulge is dominated by stars born prior to bar formation. This is because the ba…
We review the observed morphological, photometric, and kinematic properties of boxy/peanut (B/P) shape bulges. Nearly half of the bulges in the nearby edge-on galaxies have these characteristics, which fraction is similar to the observed bar fraction in Hubble types earlier than Scd. B/P bulges are generally detected in the edge-on view, but it has been recently demonstrated that barlenses, which are lens-like structures embedded in bars, are the more face-on counterparts of the B/P bulges. Multi-component structural decompositions have shown that B/P/barlens structures are likely to account f…
Barred galaxies have interesting morphological features whose presence and properties set constraints on galactic evolution. Here we examine barlenses, i.e. lens-like components whose extent along the bar major axis is shorter than that of the bar and whose outline is oval or circular. We identify and analyse barlenses in $N$-body plus SPH simulations, compare them extensively with those from the NIRS0S (Near-IR S0 galaxy survey) and the S$^4$G samples (Spitzer Survey of Stellar Structure in Galaxies) and find very good agreement. We observe barlenses in our simulations from different viewing …
We examine the effects that the modelling of a Boxy/Peanut (B/P) bulge will have on the estimates of the stellar gravitational potential, forces, orbital structure and bar strength of barred galaxies. We present a method for obtaining the potential of disc galaxies from surface density images, assuming a vertical density distribution (height function), which is let to vary with position, thus enabling it to represent the geometry of a B/P. We construct a B/P height function after the results from a high-resolution, N-body+SPH simulation of an isolated galaxy and compare the resulting dynamical…
We study the colors and orientations of structures in low and intermediate inclination barred galaxies. We test the hypothesis that barlenses, roundish central components embedded in bars, could form a part of the bar in a similar manner to boxy/peanut bulges in the edge-on view. A sample of 79 barlens galaxies was selected from the S$^4$G and the NIRS0S surveys. The sizes, ellipticities, and orientations of barlenses were measured and used to define the barlens regions in the color measurements. The orientations of barlenses were studied with respect to those of the "thin bars" and the line-o…
Morphological characteristics of the vertically thick inner bar components are studied. At high galaxy inclinations they manifest as Boxy/Peanut/X-shape features, and near to face-on view as barlenses. Using the Spitzer Survey of Stellar Structure in Galaxies (S4G) and the Near-IR S0 galaxy Survey (NIRS0S), we compared the properties of 88 X-shape features, 85 barlenses, and the photometric bulges of 41 non-barred galaxies. Sizes and minor-to-major axis ratios (b/a) of these structures are compared, and interpreted by means of synthetic images using N-body simulation models. Barlenses and thei…
Boxy/peanut bulges are considered to be part of the same stellar structure as bars and both could be linked through the buckling instability. The Milky Way is our closest example. The goal of this letter is determining if the mass assembly of the different components leaves an imprint in their stellar populations allowing to estimate the time of bar formation and its evolution. To this aim we use integral field spectroscopy to derive the stellar age distributions, SADs, along the bar and disc of NGC 6032. The analysis shows clearly different SADs for the different bar areas. There is an underl…
From a sample of 84 local barred, moderately inclined disc galaxies, we determine the fraction which host boxy or peanut-shaped (B/P) bulges (the vertically thickened inner parts of bars). We find that the frequency of B/P bulges in barred galaxies is a very strong function of stellar mass: 79% of the bars in galaxies with log (M_{star}/M_{sun}) >~ 10.4 have B/P bulges, while only 12% of those in lower-mass galaxies do. (We find a similar dependence in data published by Yoshino & Yamauchi 2015 for edge-on galaxies.) There are also strong trends with other galaxy parameters -- e.g., Hubble type…
We study the dynamical mechanisms that reinforce the formation of boxy structures in the \textit{inner} regions, roughly in the middle, of bars observed nearly \textit{face-on}. Outer boxiness, at the ends of the bars, is usually associated with orbits at the inner, radial 4:1 resonance region and can be studied with 2D dynamics. However, in the middle of the bar dominate 3D orbits that give boxy/peanut bulges in the edge-on views of the models. In the present paper we show that 3D quasi-periodic, as well as 3D chaotic orbits sticky to the x1v1 and x1v1$^{\prime}$ tori, especially from the Inn…
Vertically thickened bars, observed in the form of boxy/peanut (B/P) bulges, are found in the majority of massive barred disc galaxies in the local Universe, including our own. B/P bulges indicate that their host bars have suffered violent bending instabilities driven by anisotropic velocity distributions. We investigate for the first time how the frequency of B/P bulges in barred galaxies evolves from $z = 1$ to $z\approx 0$, using a large sample of non-edge-on galaxies with masses $M_{\star} > 10^{10}\:M_{\odot}$, selected from the HST COSMOS survey. We find the observed fraction increases f…
We use stellar dynamical bulge/disk/halo simulations to study whether barlenses (lens-like structures embedded in the narrow bar component) are just the face-on counterparts of Boxy/Peanut/X-shapes (B/P/X) seen in edge-on bars, or if some additional physical parameter affects that morphology. A range of bulge-to-disk mass and size ratios are explored: our nominal parameters ($B/D=0.08$, $r_{\rm eff}/h_r=0.07$, disk comprising 2/3 of total force at $2.2h_r$) correspond to typical MW mass galaxies. In all models a bar with pronounced B/P/X forms in a few Gyrs, visible in edge-on view. However, t…
We explore trends in the morphology and line-of-sight (los) velocity of stellar populations in the inner regions of disc galaxies, using N-body simulations with both a thin (kinematically cold) and a thick (kinematically hot) disc which form a bar and boxy/peanut (b/p) bulge. The bar in the thin disc component is $\sim$50\% stronger than the thick disc bar and is more elongated, with an axis ratio almost half that of the thick disc bar. The thin disc b/p bulge has a pronounced X-shape, while the thick disc b/p is weaker with a rather boxy shape. This leads to the signature of the b/p bulge in …
By means of idealized, dissipationless N-body simulations which follow the formation and subsequent buckling of a stellar bar, we study the characteristics of boxy/peanut-shaped bulges and compare them with the properties of the stellar populations in the Milky Way bulge. The main results of our modeling, valid for the general family of boxy/peanut shaped bulges, are the following: (i) because of the spatial redistribution in the disk initiated at the epoch of bar formation, stars from the innermost regions to the outer Lindblad resonance of the stellar bar are mapped into a boxy bulge; (ii) t…
Boxy/peanut bulges are believed to originate from galactic discs through secular processes. A little explored question is how this evolution would be modified if the initial disc was assembled around a preexisting classical bulge. Previously we showed that a low-mass initial classical bulge (ICB), as might have been present in Milky Way-like galaxies, can spin up significantly by gaining angular momentum from a bar formed through disc instability. Here we investigate how the disc instability and the kinematics of the final boxy/peanut (BP) bulge depend on the angular momentum of such a low-mas…
Bar Evolution in Edge-on Galaxies: A Demographic Study of Boxy/Peanut Bulges
Indian Institute of Science Education and Research, Bhopal（印度科学教育研究所博帕尔分校）；Universidad Andrés Bello（安德烈斯贝略大学）；Indian Institute of Astrophysics（印度天体物理研究所）
The investigation of the phase-space properties of structures encountered in a dynamical system is essential for understanding their formation and enhancement. In the present paper we explore the phase space in energy intervals where we have orbits that act as building blocks for boxy-peanut (b/p) and "{\sf X}-shaped" structures in rotating potentials of galactic type. We underline the significance of the rotational tori around the 3D families x1v1 and x1v1$^{\prime}$ that have been bifurcated from the planar x1 family. These tori play a multiple role: (i) They belong to quasi-periodic orbits …
Euclid: Early Release Observations -- The formation of peanutty dwarf galaxies in Perseus
Universiteit Gent（根特大学）；Universidad Tecnica Federico Santa Maria（费德里科·Santa Maria 技术大学）；Millennium Nucleus for Galaxies (MINGAL)（星系千年核心（MINGAL））；Universität Innsbruck（因斯布鲁克大学）；Université de Strasbourg（斯特拉斯堡大学）；CNRS, Observatoire astronomique de Strasbourg（法国国家科学研究中心，斯特拉斯堡天文台）；Kapteyn Astronomical Institute, University of Groningen（格罗宁根大学卡普坦天文研究所）；ESAC/ESA（欧洲空间应用中心/欧洲空间局）；INAF-Osservatorio Astronomico di Brera（意大利国家天体物理研究所布雷拉天文台）；INAF-Osservatorio di Astrofisica e Scienza dello Spazio di B（意大利国家天体物理研究所天文与空间科学观测站）
Applying spectral dynamics methods to one typical $N$-body model with a barlens, we dissect the modelled bar into separate components supported by completely different types of orbits. We identify at least four components: a narrow elongated bar, a boxy bar, and two components contributing to the barlens. We analyse the vertical structure of all components that make up the thick part of the bar, which has a boxy/peanut shape (B/P bulge). We show that the `peanut' shape is mainly due to the orbits that assemble the boxy part of the face-on bar. We associate the X-shape with the narrow and elong…
Numerical simulations have shown that the X-shaped structure in the Milky Way bulge can naturally arise from the bar instability and buckling instability. To understand the influence of the buckling amplitude on the morphology of the X-shape, we analyze three self-consistent numerical simulations of barred galaxies with different buckling amplitudes (strong, intermediate and weak). We derive the three-dimensional density with an adaptive kernel smoothing technique. The face-on iso-density surfaces are all elliptical, while in the edge-on view, the morphology of buckled bars transitions with in…
Bar driven secular evolution plays a key role in changing the morphology and kinematics of disk galaxies, leading to the formation of rapidly rotating boxy/peanut bulges. If these disk galaxies also hosted a preexisting classical bulge, how would the secular evolution influence the classical bulge, and also the observational properties. We first study the co-evolution of a bar and a preexisting non-rotating low-mass classical bulge such as might be present in galaxies like the Milky Way. It is shown with N-body simulations that during the secular evolution, such a bulge can gain significant an…
Boxy and peanut-shaped bulges are seen in about half of edge-on disc galaxies. Comparisons of the photometry and major-axis gas and stellar kinematics of these bulges to simulations of bar formation and evolution indicate that they are bars viewed in projection. If the properties of boxy bulges can be entirely explained by assuming they are bars, then this may imply that their hosts are pure disc galaxies with no classical bulge. A handful of these bulges, including that of the Milky Way, have been observed to rotate cylindrically, i.e. with a mean stellar velocity independent of height above …
Boxy, peanut- or X-shaped "bulges" are observed in a large fraction of barred galaxies viewed in, or close to, edge-on projection, as well as in the Milky Way. They are the product of dynamical instabilities occurring in stellar bars, which cause the latter to buckle and thicken vertically. Recent studies have found nearby galaxies that harbour two such features arising at different radial scales, in a nested configuration. In this paper we explore the formation of such double peanuts, using a collisionless N-body simulation of a pure disc evolving in isolation within a live dark matter halo, …
We used the new ESO VLT instrument MUSE to obtain spectral and imaging coverage of NGC 4710. The wide area and excellent sampling of the MUSE integral field spectrograph allows us to investigate the dynamical properties of the X-shaped bulge of NGC 4710 and compare it with the properties of the Milky Way's own X-shaped bulge. We measured the radial velocities, velocity dispersion, and stellar populations using a penalized pixel full spectral fitting technique adopting simple stellar populations models, on a 1' x 1' area centred on the bulge of NGC 4710. We have constructed the velocity maps of…
Bulges of edge-on galaxies are often boxy/peanut-shaped (B/PS), and unsharp masks reveal the presence of an X shape. Simulations show that these shapes can be produced by dynamical processes driven by a bar which vertically thickens the centre. In the Milky Way, which contains such a B/PS bulge, the X-shaped structure is traced by the metal-rich stars but not by the metal-poor ones. Recently Debattista et al. (2016) interpreted this property as a result of the varying effect of the bar on stellar populations with different starting kinematics. This kinematic fractionation model predicts that c…
We continue the analysis of the dataset of our spectroscopic observation campaign of M31, by deriving simple stellar population properties (age metallicity and alpha-elements overabundance) from the measurement of Lick/IDS absorption line indices. We describe their two-dimensional maps taking into account the dust distribution in M31. 80\% of the values of our age measurements are larger than 10 Gyr. The central 100 arcsec of M31 are dominated by the stars of the classical bulge of M31. They are old (11-13 Gyr), metal-rich (as high as [Z/H]~0.35 dex) at the center with a negative gradient outw…
The Milky Way bulge has a boxy/peanut morphology and an X-shaped structure. This X-shape has been revealed by the `split in the red clump' from star counts along the line of sight toward the bulge, measured from photometric surveys. This boxy, X-shaped bulge morphology is not unique to the Milky Way and such bulges are observed in other barred spiral galaxies. N-body simulations show that boxy and X-shaped bulges are formed from the disk via dynamical instabilities. It has also been proposed that the Milky Way bulge is not X-shaped, but rather, the apparent split in the red clump stars is a co…
The structure and evolution of the stellar velocity ellipsoid plays an important role in shaping galaxies undergoing bar driven secular evolution and the eventual formation of a boxy/peanut bulge such as present in the Milky Way. Using collisionless N-body simulations, we show that during the formation of such a boxy/peanut bulge, the meridional shear stress of stars, which can be measured by the meridional tilt of the velocity ellipsoid, reaches a characteristic peak in its time evolution. It is shown that the onset of a bar buckling instability is closely connected to the maximum meridional …
We analyse the kinematics of $\sim 2000$ giant stars in the direction of the Galactic bulge, extracted from the Gaia-ESO survey in the region $-10^\circ \lesssim \ell \lesssim 10^\circ$ and $-11^\circ \lesssim b \lesssim -3^\circ$. We find distinct kinematic trends in the metal rich ($\mathrm{[M/H]}>0$) and metal poor ($\mathrm{[M/H]}<0$) stars in the data. The velocity dispersion of the metal-rich stars drops steeply with latitude, compared to a flat profile in the metal-poor stars, as has been seen previously. We argue that the metal-rich stars in this region are mostly on orbits that suppor…
The metal-poor stars in the bulge are important relics of the Milky Way's formation history, as simulations predict that they are some of the oldest stars in the Galaxy. In order to determine if they are truly ancient stars, we must understand the origins of this population. Currently, it is unclear if the metal-poor stars in the bulge ([Fe/H] < -1 dex) are merely halo interlopers, a unique accreted population, part of the boxy/peanut-shaped (B/P) bulge or a classical bulge population. In this work, we use spectra from the VLT/FLAMES spectrograph to obtain metallicity estimates using the Ca-II…
The observations of external galaxies are projected to the 2D sky plane. Reconstructing the 3D intrinsic density distribution of a galaxy from the 2D image is challenging, especially for barred galaxies, but is a critical step for constructing galactic dynamical models. Here we present a method for deprojecting barred galaxies and we validate the method by testing against mock images created from an N-body simulation with a peanut-shaped bar. We decompose a galaxy image into a bulge (including a bar) and a disk. By subtracting the disk from the original image a barred bulge remains. We perform…
We present the metallicity results from the ARGOS spectroscopic survey of the Galactic bulge. Our aim is to understand the formation of the Galactic bulge: did it form via mergers, as expected from Lambda CDM theory, or from disk instabilities, as suggested by its boxy/peanut shape, or both? We have obtained spectra for 28,000 stars at a spectral resolution of R = 11,000. From these spectra, we have determined stellar parameters and distances to an accuracy of < 1.5 kpc. The stars in the inner Galaxy span a large range in [Fe/H], -2.8 < [Fe/H] < +0.6. From the spatial distribution of the red c…
In the MW bulge, metal-rich stars form a strong bar and are more peanut-shaped than metal-poor stars. It has been recently claimed that this behavior is driven by the initial in-plane radial velocity dispersion of these populations, rather than by their initial vertical random motions. This has led to the suggestion that a thick disc is not necessary to explain the characteristics of the MW bulge. We rediscuss this issue by analyzing two dissipationless N-body simulations of boxy/peanut (b/p)-shaped bulges formed from composite stellar discs, made of kinematically cold and hot stellar populati…
Our Galaxy is known to contain a central boxy/peanut-shaped bulge, yet the importance of a classical, pressure-supported component within the central part of the Milky Way is still being debated. It should be most visible at low metallicity, a regime that has not yet been studied in detail. Using metallicity-sensitive narrow-band photometry, the Pristine Inner Galaxy Survey (PIGS) has collected a large sample of metal-poor ([Fe/H] < -1.0) stars in the inner Galaxy to address this open question. We use PIGS to trace the metal-poor inner Galaxy kinematics as function of metallicity for the first…
Barred structures are important in understanding galaxy evolution, but they were not included explicitly in most dynamical models for nearby galaxies due to their complicated morphological and kinematic properties. We modify the triaxial orbit-superposition Schwarzschild implementation by Van den Bosch et al. (2008) to include barred structures explicitly. The gravitational potential is a combination of a spherical dark matter halo and stellar mass; with the 3D stellar density distribution de-projected from the observed 2D image using a two-component de-projection method, including an axisymme…
The inner Milky Way is dominated by a boxy, triaxial bulge which is believed to have formed through disk instability processes. Despite its proximity, its large-scale properties are still not very well known, due to our position in the obscuring Galactic disk. Here we make a measurement of the three-dimensional density distribution of the Galactic bulge using red clump giants identified in DR1 of the VVV survey. Our density map covers the inner (2.2x1.4x1.1)kpc of the bulge/bar. Line-of-sight density distributions are estimated by deconvolving extinction and completeness corrected K-band magni…
Near the minor axis of the Galactic bulge, at latitudes b < -5 degrees, the red giant clump stars are split into two components along the line of sight. We investigate this split using the three fields from the ARGOS survey that lie on the minor axis at (l,b) = (0,-5), (0,-7.5), (0,-10) degrees. The separation is evident for stars with [Fe/H] > -0.5 in the two higher-latitude fields, but not in the field at b = -5 degrees. Stars with [Fe/H] < -0.5 do not show the split. We compare the spatial distribution and kinematics of the clump stars with predictions from an evolutionary N-body model of a…
The majority of massive disk galaxies, including our own, have stellar bars with vertically thick inner regions -- so-called "boxy/peanut-shaped" (B/P) bulges. The most commonly suggested mechanism for the formation of B/P bulges is a violent vertical "buckling" instability in the bar, something that has been seen in N-body simulations for over twenty years, but never identified in real galaxies. Here, we present the first direct observational evidence for ongoing buckling in two nearby galaxies (NGC 3227 and NGC 4569), including characteristic asymmetric isophotes and (in NGC 4569) stellar-ki…
We use N-body chemo-dynamic simulations to study the coupling between morphology, kinematics and metallicity of the bar/bulge region of our Galaxy. We make qualitative comparisons of our results with available observations and find very good agreement. We conclude that this region is complex, since it comprises several stellar components with different properties -- i.e. a boxy/peanut bulge, thin and thick disc components, and, to lesser extents, a disky pseudobulge, a stellar halo and a small classical bulge -- all cohabiting in dynamical equilibrium. Our models show strong links between kine…
The stellar populations in the inner kiloparsecs of the Milky Way (MW) show complex kinematical and chemical structures. The origin and evolution of these structures is still under debate. Here we study the central region of a fully cosmological hydrodynamical simulation of a disk galaxy that reproduces key properties of the inner kiloparsecs of the MW: it has a boxy morphology and shows an overall rotation and dispersion profile in agreement with observations. We use a clustering algorithm on stellar kinematics to identify a number of discrete kinematic components: a high- and low-spin disk, …
