Bars have a complex three-dimensional shape. In particular their inner part is vertically much thicker than the parts further out. Viewed edge-on, the thick part of the bar is what is commonly known as a boxy-, peanut- or X- bulge and viewed face-on it is referred to as a barlens. These components are due to disc and bar instabilities and are composed of disc material. I review here their formation, evolution and dynamics, using simulations, orbital structure theory and comparisons to observations.
We study the colors and orientations of structures in low and intermediate inclination barred galaxies. We test the hypothesis that barlenses, roundish central components embedded in bars, could form a part of the bar in a similar manner to boxy/peanut bulges in the edge-on view. A sample of 79 barlens galaxies was selected from the S$^4$G and the NIRS0S surveys. The sizes, ellipticities, and orientations of barlenses were measured and used to define the barlens regions in the color measurements. The orientations of barlenses were studied with respect to those of the "thin bars" and the line-o…
Morphological characteristics of the vertically thick inner bar components are studied. At high galaxy inclinations they manifest as Boxy/Peanut/X-shape features, and near to face-on view as barlenses. Using the Spitzer Survey of Stellar Structure in Galaxies (S4G) and the Near-IR S0 galaxy Survey (NIRS0S), we compared the properties of 88 X-shape features, 85 barlenses, and the photometric bulges of 41 non-barred galaxies. Sizes and minor-to-major axis ratios (b/a) of these structures are compared, and interpreted by means of synthetic images using N-body simulation models. Barlenses and thei…
Based on the spectral analysis of individual orbits of stars from different $N$-body models, we show that the face-on morphology of the so-called `face-on peanut' bars (boxy bars) and barlenses is supported by different types of orbits. For `face-on peanut' bars, the so-called boxy orbits come to the fore, and they are responsible for the unusual morphology of the bar in the central regions. In the models with compact bulges, the bars show a barlens morphology in their central parts. We found that the barlens supporting orbits come in two types, one of which gives a square-like shape and the o…
Barred galaxies have interesting morphological features whose presence and properties set constraints on galactic evolution. Here we examine barlenses, i.e. lens-like components whose extent along the bar major axis is shorter than that of the bar and whose outline is oval or circular. We identify and analyse barlenses in $N$-body plus SPH simulations, compare them extensively with those from the NIRS0S (Near-IR S0 galaxy survey) and the S$^4$G samples (Spitzer Survey of Stellar Structure in Galaxies) and find very good agreement. We observe barlenses in our simulations from different viewing …
We analyse the distribution of Mira variable stars in the central region of the Milky Way. We find that with increasing period, i.e. decreasing age, the Miras shift towards negative Galactic longitudes $\ell$. Comparing to a cosmological zoom simulation of a barred galaxy, we find that this shift with age can be explained by an age-morphology dependence of the boxy peanut/bulge. Owing to a combination of projection effects and the limitation of the range of Galactic longitudes, the near hump at $\ell>0$ is more truncated for younger populations, and the far hump at $\ell<0$ dominates the obser…
We analyse the positions of RR Lyrae stars in the central region of the Milky Way. In addition to the overall bar shape detected previously, we find evidence for a peanut shaped structure, in form of overdensities near $\ell=-2$ deg and $1$ deg at $b\sim-3.5$ deg. The corresponding physical distance between the two peaks of the peanut is $\sim0.7$ kpc, significantly shorter than that found from near-IR images (3.3 kpc) and red-clump stars. Qualitatively this is expected from `fractionation' of bar orbits, which we demonstrate to be matched in a simulation of an inside-out growing disc subseque…
We study the imprints of boxy/peanut structures on the 2D line-of-sight kinematics of simulated disk galaxies. The models under study belong to a family with varying initial gas fraction and halo triaxiality, plus few other control runs with different structural parameters; the kinematic information was extracted using the Voronoi-binning technique and parametrised up to the fourth order of a Gauss-Hermite series. Building on a previous work for the long-slit case, we investigate the 2D kinematic behaviour in the edge-on projection as a function of the boxy/peanut strength and position angle; …
We investigate barlenses in the Calar Alto Legacy Integral Field Area (CALIFA) survey galaxies, studying their morphologies, stellar populations and metallicities. Multi-component decompositions are made using the Sloan Digital Sky Survey (SDSS) images and making GALFIT models, fitting besides bulges, disks and bars, also barlenses, which are the face-on counterparts of Boxy/Peanut bulges. Similar GALFIT models as were made for the galaxies, were made also for the simulation snap-shots. For the stellar populations and metallicities in the various structure components CALIFA IFU-observations ar…
We present SAURON integral-field observations of a sample of 12 mid to high-inclination disk galaxies, to unveil hidden bars on the basis of their kinematics, i.e., the correlation between velocity and h3 profiles, and to establish their degree of cylindrical rotation. For the latter, we introduce a method to quantify cylindrical rotation that is robust against inner disk components. We confirm high-levels of cylindrical rotation in boxy/peanut bulges, but also observe this feature in a few galaxies with rounder bulges. We suggest that these are also barred galaxies with end-on orientations. R…
In this letter we investigate the effect of boxy/peanut (b/p) bulges on bar-induced gas inflow to the central kiloparsec, which plays a crucial role on the evolution of disc galaxies. We carry out hydrodynamic gas response simulations in realistic barred galaxy potentials, including or not the geometry of a b/p bulge, to investigate the amount of gas inflow induced in the different models. We find that b/p bulges can reduce the gas inflow rate to the central kiloparsec by more than an order of magnitude, which leads to a reduction in the amount of gas available in the central regions. We also …
We use stellar dynamical bulge/disk/halo simulations to study whether barlenses (lens-like structures embedded in the narrow bar component) are just the face-on counterparts of Boxy/Peanut/X-shapes (B/P/X) seen in edge-on bars, or if some additional physical parameter affects that morphology. A range of bulge-to-disk mass and size ratios are explored: our nominal parameters ($B/D=0.08$, $r_{\rm eff}/h_r=0.07$, disk comprising 2/3 of total force at $2.2h_r$) correspond to typical MW mass galaxies. In all models a bar with pronounced B/P/X forms in a few Gyrs, visible in edge-on view. However, t…
It is well established that bars evolve significantly after they form in galaxy discs, often changing shape both in and out of the disc plane. In some cases they may bend or buckle out of the disc plane resulting in the formation of boxy/peanut/x-shape bulges. In this paper we show that the dark matter halo shape affects bar formation and buckling. We have performed N-body simulations of bar buckling in non-spherical dark matter halos and traced bar evolution for 8 Gyr. We find that bar formation is delayed in oblate halos, resulting in delayed buckling whereas bars form earlier in prolate hal…
Some barred galaxies, including the Milky Way, host a boxy/peanut/X-shaped bulge (BPX-shaped bulge). Previous studies suggested that the BPX-shaped bulge can either be developed by bar buckling or by vertical inner Lindblad resonance (vILR) heating without buckling. In this paper, we study the observable consequence of an BPX-shaped bulge built up quickly after bar formation via vILR heating without buckling, using an N-body/hydrodynamics simulation of an isolated Milky Way-like galaxy. We found that the BPX-shaped bulge is dominated by stars born prior to bar formation. This is because the ba…
We review the observed morphological, photometric, and kinematic properties of boxy/peanut (B/P) shape bulges. Nearly half of the bulges in the nearby edge-on galaxies have these characteristics, which fraction is similar to the observed bar fraction in Hubble types earlier than Scd. B/P bulges are generally detected in the edge-on view, but it has been recently demonstrated that barlenses, which are lens-like structures embedded in bars, are the more face-on counterparts of the B/P bulges. Multi-component structural decompositions have shown that B/P/barlens structures are likely to account f…
We examine the effects that the modelling of a Boxy/Peanut (B/P) bulge will have on the estimates of the stellar gravitational potential, forces, orbital structure and bar strength of barred galaxies. We present a method for obtaining the potential of disc galaxies from surface density images, assuming a vertical density distribution (height function), which is let to vary with position, thus enabling it to represent the geometry of a B/P. We construct a B/P height function after the results from a high-resolution, N-body+SPH simulation of an isolated galaxy and compare the resulting dynamical…
Boxy/peanut bulges are considered to be part of the same stellar structure as bars and both could be linked through the buckling instability. The Milky Way is our closest example. The goal of this letter is determining if the mass assembly of the different components leaves an imprint in their stellar populations allowing to estimate the time of bar formation and its evolution. To this aim we use integral field spectroscopy to derive the stellar age distributions, SADs, along the bar and disc of NGC 6032. The analysis shows clearly different SADs for the different bar areas. There is an underl…
From a sample of 84 local barred, moderately inclined disc galaxies, we determine the fraction which host boxy or peanut-shaped (B/P) bulges (the vertically thickened inner parts of bars). We find that the frequency of B/P bulges in barred galaxies is a very strong function of stellar mass: 79% of the bars in galaxies with log (M_{star}/M_{sun}) >~ 10.4 have B/P bulges, while only 12% of those in lower-mass galaxies do. (We find a similar dependence in data published by Yoshino & Yamauchi 2015 for edge-on galaxies.) There are also strong trends with other galaxy parameters -- e.g., Hubble type…
Vertically thickened bars, observed in the form of boxy/peanut (B/P) bulges, are found in the majority of massive barred disc galaxies in the local Universe, including our own. B/P bulges indicate that their host bars have suffered violent bending instabilities driven by anisotropic velocity distributions. We investigate for the first time how the frequency of B/P bulges in barred galaxies evolves from $z = 1$ to $z\approx 0$, using a large sample of non-edge-on galaxies with masses $M_{\star} > 10^{10}\:M_{\odot}$, selected from the HST COSMOS survey. We find the observed fraction increases f…
We investigate whether the formation mechanism of boxy and peanut-shaped (B/PS) bulges could depend on the gas content of the galaxy. We have performed N-body simulations with and without a gaseous component. In the second case star formation/feedback recipes have also been implemented to create new stellar populations. As in many previous studies, in our N-body collisionless simulation, the B/PS is due to the classical break in the z mirror symmetry lasting roughly 200 Myr. When a gaseous component and star formation recipes are added to the simulation, the bulge-growing mechanism is quite di…
We study the dynamical mechanisms that reinforce the formation of boxy structures in the \textit{inner} regions, roughly in the middle, of bars observed nearly \textit{face-on}. Outer boxiness, at the ends of the bars, is usually associated with orbits at the inner, radial 4:1 resonance region and can be studied with 2D dynamics. However, in the middle of the bar dominate 3D orbits that give boxy/peanut bulges in the edge-on views of the models. In the present paper we show that 3D quasi-periodic, as well as 3D chaotic orbits sticky to the x1v1 and x1v1$^{\prime}$ tori, especially from the Inn…
We explore trends in the morphology and line-of-sight (los) velocity of stellar populations in the inner regions of disc galaxies, using N-body simulations with both a thin (kinematically cold) and a thick (kinematically hot) disc which form a bar and boxy/peanut (b/p) bulge. The bar in the thin disc component is $\sim$50\% stronger than the thick disc bar and is more elongated, with an axis ratio almost half that of the thick disc bar. The thin disc b/p bulge has a pronounced X-shape, while the thick disc b/p is weaker with a rather boxy shape. This leads to the signature of the b/p bulge in …
By means of idealized, dissipationless N-body simulations which follow the formation and subsequent buckling of a stellar bar, we study the characteristics of boxy/peanut-shaped bulges and compare them with the properties of the stellar populations in the Milky Way bulge. The main results of our modeling, valid for the general family of boxy/peanut shaped bulges, are the following: (i) because of the spatial redistribution in the disk initiated at the epoch of bar formation, stars from the innermost regions to the outer Lindblad resonance of the stellar bar are mapped into a boxy bulge; (ii) t…
Bar Evolution in Edge-on Galaxies: A Demographic Study of Boxy/Peanut Bulges
Indian Institute of Science Education and Research, Bhopal（印度科学教育研究所博帕尔分校）；Universidad Andrés Bello（安德烈斯贝略大学）；Indian Institute of Astrophysics（印度天体物理研究所）
Boxy/peanut bulges are believed to originate from galactic discs through secular processes. A little explored question is how this evolution would be modified if the initial disc was assembled around a preexisting classical bulge. Previously we showed that a low-mass initial classical bulge (ICB), as might have been present in Milky Way-like galaxies, can spin up significantly by gaining angular momentum from a bar formed through disc instability. Here we investigate how the disc instability and the kinematics of the final boxy/peanut (BP) bulge depend on the angular momentum of such a low-mas…
The investigation of the phase-space properties of structures encountered in a dynamical system is essential for understanding their formation and enhancement. In the present paper we explore the phase space in energy intervals where we have orbits that act as building blocks for boxy-peanut (b/p) and "{\sf X}-shaped" structures in rotating potentials of galactic type. We underline the significance of the rotational tori around the 3D families x1v1 and x1v1$^{\prime}$ that have been bifurcated from the planar x1 family. These tori play a multiple role: (i) They belong to quasi-periodic orbits …
Applying spectral dynamics methods to one typical $N$-body model with a barlens, we dissect the modelled bar into separate components supported by completely different types of orbits. We identify at least four components: a narrow elongated bar, a boxy bar, and two components contributing to the barlens. We analyse the vertical structure of all components that make up the thick part of the bar, which has a boxy/peanut shape (B/P bulge). We show that the `peanut' shape is mainly due to the orbits that assemble the boxy part of the face-on bar. We associate the X-shape with the narrow and elong…
Numerical simulations have shown that the X-shaped structure in the Milky Way bulge can naturally arise from the bar instability and buckling instability. To understand the influence of the buckling amplitude on the morphology of the X-shape, we analyze three self-consistent numerical simulations of barred galaxies with different buckling amplitudes (strong, intermediate and weak). We derive the three-dimensional density with an adaptive kernel smoothing technique. The face-on iso-density surfaces are all elliptical, while in the edge-on view, the morphology of buckled bars transitions with in…
Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle ($i$), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high $i$) or as a barlens structure (at low $i$). We visually identify bars, boxy/peanut-s…
Bar driven secular evolution plays a key role in changing the morphology and kinematics of disk galaxies, leading to the formation of rapidly rotating boxy/peanut bulges. If these disk galaxies also hosted a preexisting classical bulge, how would the secular evolution influence the classical bulge, and also the observational properties. We first study the co-evolution of a bar and a preexisting non-rotating low-mass classical bulge such as might be present in galaxies like the Milky Way. It is shown with N-body simulations that during the secular evolution, such a bulge can gain significant an…
Boxy/Peanut/X-shaped (B/P/X) bulges are studied using the 3.6 mum images from the Spitzer Survey of Stellar Structure in Galaxies, and the K_s-band images from the Near-IR S0 galaxy Survey. They are compared with the properties of barlenses, defined as lens-like structures embedded in bars, with sizes of about 50% of bars and axial ratios of 0.6-0.9. Based on observations and recent simulation models we show evidence that barlenses are the more face-on counterparts of B/P/X-shaped bulges. Using unsharp masks 18 new X-shaped structures are identified, covering a large range of galaxy inclinatio…
Boxy, peanut- or X-shaped "bulges" are observed in a large fraction of barred galaxies viewed in, or close to, edge-on projection, as well as in the Milky Way. They are the product of dynamical instabilities occurring in stellar bars, which cause the latter to buckle and thicken vertically. Recent studies have found nearby galaxies that harbour two such features arising at different radial scales, in a nested configuration. In this paper we explore the formation of such double peanuts, using a collisionless N-body simulation of a pure disc evolving in isolation within a live dark matter halo, …
We used the new ESO VLT instrument MUSE to obtain spectral and imaging coverage of NGC 4710. The wide area and excellent sampling of the MUSE integral field spectrograph allows us to investigate the dynamical properties of the X-shaped bulge of NGC 4710 and compare it with the properties of the Milky Way's own X-shaped bulge. We measured the radial velocities, velocity dispersion, and stellar populations using a penalized pixel full spectral fitting technique adopting simple stellar populations models, on a 1' x 1' area centred on the bulge of NGC 4710. We have constructed the velocity maps of…
Boxy and peanut-shaped bulges are seen in about half of edge-on disc galaxies. Comparisons of the photometry and major-axis gas and stellar kinematics of these bulges to simulations of bar formation and evolution indicate that they are bars viewed in projection. If the properties of boxy bulges can be entirely explained by assuming they are bars, then this may imply that their hosts are pure disc galaxies with no classical bulge. A handful of these bulges, including that of the Milky Way, have been observed to rotate cylindrically, i.e. with a mean stellar velocity independent of height above …
Bulges of edge-on galaxies are often boxy/peanut-shaped (B/PS), and unsharp masks reveal the presence of an X shape. Simulations show that these shapes can be produced by dynamical processes driven by a bar which vertically thickens the centre. In the Milky Way, which contains such a B/PS bulge, the X-shaped structure is traced by the metal-rich stars but not by the metal-poor ones. Recently Debattista et al. (2016) interpreted this property as a result of the varying effect of the bar on stellar populations with different starting kinematics. This kinematic fractionation model predicts that c…
A catalogue of the morphological features for the complete Spitzer Survey of Stellar Structure in Galaxies (S$^4$G), including 2352 nearby galaxies, is presented. The measurements are made using 3.6 $μ$m images, largely tracing the old stellar population; at this wavelength the effects of dust are also minimal. The measured features are the sizes, ellipticities, and orientations of bars, rings, ringlenses, and lenses. Measured in a similar manner are also barlenses (lens-like structures embedded in the bars), which are not lenses in the usual sense, being rather the more face-on counterparts o…
We continue the analysis of the dataset of our spectroscopic observation campaign of M31, by deriving simple stellar population properties (age metallicity and alpha-elements overabundance) from the measurement of Lick/IDS absorption line indices. We describe their two-dimensional maps taking into account the dust distribution in M31. 80\% of the values of our age measurements are larger than 10 Gyr. The central 100 arcsec of M31 are dominated by the stars of the classical bulge of M31. They are old (11-13 Gyr), metal-rich (as high as [Z/H]~0.35 dex) at the center with a negative gradient outw…
The Milky Way bulge has a boxy/peanut morphology and an X-shaped structure. This X-shape has been revealed by the `split in the red clump' from star counts along the line of sight toward the bulge, measured from photometric surveys. This boxy, X-shaped bulge morphology is not unique to the Milky Way and such bulges are observed in other barred spiral galaxies. N-body simulations show that boxy and X-shaped bulges are formed from the disk via dynamical instabilities. It has also been proposed that the Milky Way bulge is not X-shaped, but rather, the apparent split in the red clump stars is a co…
Cosmological simulations show that dark matter halos surrounding baryonic disks have a wide range of angular momenta, measured by the spin parameter ($λ$). In this study, we bring out the importance of inner angular momentum($<$30 kpc), measured in terms of the halo spin parameter, on the secular evolution of the bar using N-body simulations. We have varied the halo spin parameter $λ$ from 0 to 0.1 for co-rotating (prograde) spinning halos and one counter-rotating (retrograde) halo spin ($λ$=-0.1) with respect to the disk. We report that as the halo spin increases, the buckling is also trigger…
We present a family of analytical potential-density pairs for barred discs, which can be combined to describe galactic bars in a realistic way, including boxy/peanut components. We illustrate this with two reasonable compound models. Computer code for the evaluation of potential, forces, density, and projected density is freely provided.
Galactic bars are unstable to a vertical buckling instability which heats the disk and in some cases forms a boxy/peanut shaped bulge. We analyze the buckling instability as an application of classical Euler buckling followed by nonlinear gravitational Landau damping in the collisionless system. We find that the buckling instability is dictated by the kinematic properties and geometry of the bar. The analytical result is compared to simulations of isolated galaxies containing the disk and dark matter components. Our results demonstrate that violent buckling does not destroy bars while a less e…
We present the metallicity results from the ARGOS spectroscopic survey of the Galactic bulge. Our aim is to understand the formation of the Galactic bulge: did it form via mergers, as expected from Lambda CDM theory, or from disk instabilities, as suggested by its boxy/peanut shape, or both? We have obtained spectra for 28,000 stars at a spectral resolution of R = 11,000. From these spectra, we have determined stellar parameters and distances to an accuracy of < 1.5 kpc. The stars in the inner Galaxy span a large range in [Fe/H], -2.8 < [Fe/H] < +0.6. From the spatial distribution of the red c…
We review the observational evidences concerning the three-dimensional structure of the Galactic bulge. Although the inner few kpc of our Galaxy are normally referred to as {\it the bulge}, all the observations demonstrate that this region is dominated by a bar, i.e., the bulge is a bar. The bar has a boxy/peanut (X\--shaped) structure in its outer regions, while it seems to become less and less elongated in its innermost region. A thinner and longer structure departing from the main bar has also been found, although the observational evidences that support the scenario of two separate structu…
The central regions of disc galaxies hold clues to the processes that dominate their formation and evolution. The TIMER project has obtained high signal-to-noise and spatial resolution integral-field spectroscopy data of the inner few kpc of 21 nearby massive barred galaxies, allowing studies of the stellar kinematics with unprecedented spatial resolution. We confirm theoretical predictions of the effects of bars on stellar kinematics, and identify box/peanuts through kinematic signatures in mildly and moderately inclined galaxies, finding a lower limit to the fraction of massive barred galaxi…
In the MW bulge, metal-rich stars form a strong bar and are more peanut-shaped than metal-poor stars. It has been recently claimed that this behavior is driven by the initial in-plane radial velocity dispersion of these populations, rather than by their initial vertical random motions. This has led to the suggestion that a thick disc is not necessary to explain the characteristics of the MW bulge. We rediscuss this issue by analyzing two dissipationless N-body simulations of boxy/peanut (b/p)-shaped bulges formed from composite stellar discs, made of kinematically cold and hot stellar populati…
The inner Milky Way is dominated by a boxy, triaxial bulge which is believed to have formed through disk instability processes. Despite its proximity, its large-scale properties are still not very well known, due to our position in the obscuring Galactic disk. Here we make a measurement of the three-dimensional density distribution of the Galactic bulge using red clump giants identified in DR1 of the VVV survey. Our density map covers the inner (2.2x1.4x1.1)kpc of the bulge/bar. Line-of-sight density distributions are estimated by deconvolving extinction and completeness corrected K-band magni…
Near the minor axis of the Galactic bulge, at latitudes b < -5 degrees, the red giant clump stars are split into two components along the line of sight. We investigate this split using the three fields from the ARGOS survey that lie on the minor axis at (l,b) = (0,-5), (0,-7.5), (0,-10) degrees. The separation is evident for stars with [Fe/H] > -0.5 in the two higher-latitude fields, but not in the field at b = -5 degrees. Stars with [Fe/H] < -0.5 do not show the split. We compare the spatial distribution and kinematics of the clump stars with predictions from an evolutionary N-body model of a…
Our Galaxy is known to contain a central boxy/peanut-shaped bulge, yet the importance of a classical, pressure-supported component within the central part of the Milky Way is still being debated. It should be most visible at low metallicity, a regime that has not yet been studied in detail. Using metallicity-sensitive narrow-band photometry, the Pristine Inner Galaxy Survey (PIGS) has collected a large sample of metal-poor ([Fe/H] < -1.0) stars in the inner Galaxy to address this open question. We use PIGS to trace the metal-poor inner Galaxy kinematics as function of metallicity for the first…
