Based on the spectral analysis of individual orbits of stars from different $N$-body models, we show that the face-on morphology of the so-called `face-on peanut' bars (boxy bars) and barlenses is supported by different types of orbits. For `face-on peanut' bars, the so-called boxy orbits come to the fore, and they are responsible for the unusual morphology of the bar in the central regions. In the models with compact bulges, the bars show a barlens morphology in their central parts. We found that the barlens supporting orbits come in two types, one of which gives a square-like shape and the other have a rosette-like shape in the frame co-rotating with the bar. Such a shape is typical for orbits around stable loop orbits in nearly axisymmetric potentials only slightly distorted by the bar. They were already known from some of the previous studies but their role in barlens shaping was barely investigated. Although quite simple, the rosette-like orbits are found to be the main building block of a barlens in our models. The detailed analysis of all bar orbits also allowed us to distinguish the x2 orbital family and isolate the structure supported by orbits trapped around this family. The x2 family is well-known, but, apparently, for the first time in $N$-body models we have revealed the structure it supports by means of spectral dynamics and highlight its contribution to the barlens. We found that the x2 family population increases with an increase in central matter concentration.
Bars have a complex three-dimensional shape. In particular their inner part is vertically much thicker than the parts further out. Viewed edge-on, the thick part of the bar is what is commonly known as a boxy-, peanut- or X- bulge and viewed face-on it is referred to as a barlens. These components are due to disc and bar instabilities and are composed of disc material. I review here their formation, evolution and dynamics, using simulations, orbital structure theory and comparisons to observations.
We study the colors and orientations of structures in low and intermediate inclination barred galaxies. We test the hypothesis that barlenses, roundish central components embedded in bars, could form a part of the bar in a similar manner to boxy/peanut bulges in the edge-on view. A sample of 79 barlens galaxies was selected from the S$^4$G and the NIRS0S surveys. The sizes, ellipticities, and orientations of barlenses were measured and used to define the barlens regions in the color measurements. The orientations of barlenses were studied with respect to those of the "thin bars" and the line-o…
Morphological characteristics of the vertically thick inner bar components are studied. At high galaxy inclinations they manifest as Boxy/Peanut/X-shape features, and near to face-on view as barlenses. Using the Spitzer Survey of Stellar Structure in Galaxies (S4G) and the Near-IR S0 galaxy Survey (NIRS0S), we compared the properties of 88 X-shape features, 85 barlenses, and the photometric bulges of 41 non-barred galaxies. Sizes and minor-to-major axis ratios (b/a) of these structures are compared, and interpreted by means of synthetic images using N-body simulation models. Barlenses and thei…
Barred galaxies have interesting morphological features whose presence and properties set constraints on galactic evolution. Here we examine barlenses, i.e. lens-like components whose extent along the bar major axis is shorter than that of the bar and whose outline is oval or circular. We identify and analyse barlenses in $N$-body plus SPH simulations, compare them extensively with those from the NIRS0S (Near-IR S0 galaxy survey) and the S$^4$G samples (Spitzer Survey of Stellar Structure in Galaxies) and find very good agreement. We observe barlenses in our simulations from different viewing …
We investigate barlenses in the Calar Alto Legacy Integral Field Area (CALIFA) survey galaxies, studying their morphologies, stellar populations and metallicities. Multi-component decompositions are made using the Sloan Digital Sky Survey (SDSS) images and making GALFIT models, fitting besides bulges, disks and bars, also barlenses, which are the face-on counterparts of Boxy/Peanut bulges. Similar GALFIT models as were made for the galaxies, were made also for the simulation snap-shots. For the stellar populations and metallicities in the various structure components CALIFA IFU-observations ar…
We use stellar dynamical bulge/disk/halo simulations to study whether barlenses (lens-like structures embedded in the narrow bar component) are just the face-on counterparts of Boxy/Peanut/X-shapes (B/P/X) seen in edge-on bars, or if some additional physical parameter affects that morphology. A range of bulge-to-disk mass and size ratios are explored: our nominal parameters ($B/D=0.08$, $r_{\rm eff}/h_r=0.07$, disk comprising 2/3 of total force at $2.2h_r$) correspond to typical MW mass galaxies. In all models a bar with pronounced B/P/X forms in a few Gyrs, visible in edge-on view. However, t…
Boxy/Peanut/X-shaped (B/P/X) bulges are studied using the 3.6 mum images from the Spitzer Survey of Stellar Structure in Galaxies, and the K_s-band images from the Near-IR S0 galaxy Survey. They are compared with the properties of barlenses, defined as lens-like structures embedded in bars, with sizes of about 50% of bars and axial ratios of 0.6-0.9. Based on observations and recent simulation models we show evidence that barlenses are the more face-on counterparts of B/P/X-shaped bulges. Using unsharp masks 18 new X-shaped structures are identified, covering a large range of galaxy inclinatio…
We review the observed morphological, photometric, and kinematic properties of boxy/peanut (B/P) shape bulges. Nearly half of the bulges in the nearby edge-on galaxies have these characteristics, which fraction is similar to the observed bar fraction in Hubble types earlier than Scd. B/P bulges are generally detected in the edge-on view, but it has been recently demonstrated that barlenses, which are lens-like structures embedded in bars, are the more face-on counterparts of the B/P bulges. Multi-component structural decompositions have shown that B/P/barlens structures are likely to account f…
A catalogue of the morphological features for the complete Spitzer Survey of Stellar Structure in Galaxies (S$^4$G), including 2352 nearby galaxies, is presented. The measurements are made using 3.6 $μ$m images, largely tracing the old stellar population; at this wavelength the effects of dust are also minimal. The measured features are the sizes, ellipticities, and orientations of bars, rings, ringlenses, and lenses. Measured in a similar manner are also barlenses (lens-like structures embedded in the bars), which are not lenses in the usual sense, being rather the more face-on counterparts o…
Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle ($i$), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high $i$) or as a barlens structure (at low $i$). We visually identify bars, boxy/peanut-s…
It is well established that bars evolve significantly after they form in galaxy discs, often changing shape both in and out of the disc plane. In some cases they may bend or buckle out of the disc plane resulting in the formation of boxy/peanut/x-shape bulges. In this paper we show that the dark matter halo shape affects bar formation and buckling. We have performed N-body simulations of bar buckling in non-spherical dark matter halos and traced bar evolution for 8 Gyr. We find that bar formation is delayed in oblate halos, resulting in delayed buckling whereas bars form earlier in prolate hal…
From a sample of 84 local barred, moderately inclined disc galaxies, we determine the fraction which host boxy or peanut-shaped (B/P) bulges (the vertically thickened inner parts of bars). We find that the frequency of B/P bulges in barred galaxies is a very strong function of stellar mass: 79% of the bars in galaxies with log (M_{star}/M_{sun}) >~ 10.4 have B/P bulges, while only 12% of those in lower-mass galaxies do. (We find a similar dependence in data published by Yoshino & Yamauchi 2015 for edge-on galaxies.) There are also strong trends with other galaxy parameters -- e.g., Hubble type…
We explore trends in the morphology and line-of-sight (los) velocity of stellar populations in the inner regions of disc galaxies, using N-body simulations with both a thin (kinematically cold) and a thick (kinematically hot) disc which form a bar and boxy/peanut (b/p) bulge. The bar in the thin disc component is $\sim$50\% stronger than the thick disc bar and is more elongated, with an axis ratio almost half that of the thick disc bar. The thin disc b/p bulge has a pronounced X-shape, while the thick disc b/p is weaker with a rather boxy shape. This leads to the signature of the b/p bulge in …
Boxy/peanut bulges are considered to be part of the same stellar structure as bars and both could be linked through the buckling instability. The Milky Way is our closest example. The goal of this letter is determining if the mass assembly of the different components leaves an imprint in their stellar populations allowing to estimate the time of bar formation and its evolution. To this aim we use integral field spectroscopy to derive the stellar age distributions, SADs, along the bar and disc of NGC 6032. The analysis shows clearly different SADs for the different bar areas. There is an underl…
We have measured the radial light profiles and global shapes of bars using two-dimensional 3.6 $μm $ image decompositions for 144 face-on barred galaxies from the Spitzer Survey of Stellar Structure in Galaxies (S4G). The bar surface brightness profile is correlated with the stellar mass and bulge-to-total (B/T) ratio of their host galaxies. Bars in massive and bulge-dominated galaxies (B/T$>$0.2) show a flat profile, while bars in less massive, disk-dominated galaxies (B/T$\sim$0) show an exponential, disk-like profile with a wider spread in the radial profile than in the bulge-dominated gala…
Galactic bars are unstable to a vertical buckling instability which heats the disk and in some cases forms a boxy/peanut shaped bulge. We analyze the buckling instability as an application of classical Euler buckling followed by nonlinear gravitational Landau damping in the collisionless system. We find that the buckling instability is dictated by the kinematic properties and geometry of the bar. The analytical result is compared to simulations of isolated galaxies containing the disk and dark matter components. Our results demonstrate that violent buckling does not destroy bars while a less e…
We study the dynamical mechanisms that reinforce the formation of boxy structures in the \textit{inner} regions, roughly in the middle, of bars observed nearly \textit{face-on}. Outer boxiness, at the ends of the bars, is usually associated with orbits at the inner, radial 4:1 resonance region and can be studied with 2D dynamics. However, in the middle of the bar dominate 3D orbits that give boxy/peanut bulges in the edge-on views of the models. In the present paper we show that 3D quasi-periodic, as well as 3D chaotic orbits sticky to the x1v1 and x1v1$^{\prime}$ tori, especially from the Inn…
We present a family of analytical potential-density pairs for barred discs, which can be combined to describe galactic bars in a realistic way, including boxy/peanut components. We illustrate this with two reasonable compound models. Computer code for the evaluation of potential, forces, density, and projected density is freely provided.
Vertically thickened bars, observed in the form of boxy/peanut (B/P) bulges, are found in the majority of massive barred disc galaxies in the local Universe, including our own. B/P bulges indicate that their host bars have suffered violent bending instabilities driven by anisotropic velocity distributions. We investigate for the first time how the frequency of B/P bulges in barred galaxies evolves from $z = 1$ to $z\approx 0$, using a large sample of non-edge-on galaxies with masses $M_{\star} > 10^{10}\:M_{\odot}$, selected from the HST COSMOS survey. We find the observed fraction increases f…
The stellar populations in the inner kiloparsecs of the Milky Way (MW) show complex kinematical and chemical structures. The origin and evolution of these structures is still under debate. Here we study the central region of a fully cosmological hydrodynamical simulation of a disk galaxy that reproduces key properties of the inner kiloparsecs of the MW: it has a boxy morphology and shows an overall rotation and dispersion profile in agreement with observations. We use a clustering algorithm on stellar kinematics to identify a number of discrete kinematic components: a high- and low-spin disk, …
Short (inner) bars of sub-kiloparsec radius have been hypothesized to be an important mechanism for driving gas inflows to small scales, thus feeding central black holes. Recent numerical simulations have shown that the growth of central black holes in galaxies can destroy short bars, when the black hole reaches a mass of $\sim 0.1\%$ of the total stellar mass of the galaxy. We study $N$-body simulations of galaxies with single and double bars to track the long-term evolution of the central stellar mass distribution. We find that the destruction of the short bar contributes significantly to th…
For several decades it has been known that stellar bars in disc galaxies can be triggered by interactions, or by internal processes such as dynamical instabilities. In this work, we explore the differences between these two mechanisms using numerical simulations. We perform two groups of simulations based on isolated galaxies, one group in which a bar develops naturally, and another group in which the bar could not develop in isolation. The rest of the simulations recreate 1:1 coplanar fly-by interactions computed with the impulse approximation. The orbits we use for the interactions represent…
Strong galactic bars produced in simulations tend to undergo a period of buckling instability that weakens and thickens them and forms a boxy/peanut structure in their central parts. This theoretical prediction has been confirmed by identifying such morphologies in real galaxies. The nature and origin of this instability remains however poorly understood with some studies claiming it to be due to fire-hose instability while others relating it to vertical instability of stellar orbits supporting the bar. One of the channels for the formation of galactic bars is via the interaction of disky gala…
We show for the first time, that a fully cosmological hydrodynamical simulation can reproduce key properties of the innermost region of the Milky Way. Our high resolution simulation matches the profile and kinematics of the Milky Way's boxy/peanut-shaped bulge, and hence we can use it to reconstruct and understand the bulge assembly. In particular, the age dependence of the X-shape morphology of the simulated bulge parallels the observed metallicity dependent split in the red clump stars of the inner Galaxy. We use this feature to derive an observational metric that allows us to quantify when …
Bar Evolution in Edge-on Galaxies: A Demographic Study of Boxy/Peanut Bulges
Indian Institute of Science Education and Research, Bhopal（印度科学教育研究所博帕尔分校）；Universidad Andrés Bello（安德烈斯贝略大学）；Indian Institute of Astrophysics（印度天体物理研究所）
Numerical simulations have shown that the X-shaped structure in the Milky Way bulge can naturally arise from the bar instability and buckling instability. To understand the influence of the buckling amplitude on the morphology of the X-shape, we analyze three self-consistent numerical simulations of barred galaxies with different buckling amplitudes (strong, intermediate and weak). We derive the three-dimensional density with an adaptive kernel smoothing technique. The face-on iso-density surfaces are all elliptical, while in the edge-on view, the morphology of buckled bars transitions with in…
Cosmological simulations show that dark matter halos surrounding baryonic disks have a wide range of angular momenta, measured by the spin parameter ($λ$). In this study, we bring out the importance of inner angular momentum($<$30 kpc), measured in terms of the halo spin parameter, on the secular evolution of the bar using N-body simulations. We have varied the halo spin parameter $λ$ from 0 to 0.1 for co-rotating (prograde) spinning halos and one counter-rotating (retrograde) halo spin ($λ$=-0.1) with respect to the disk. We report that as the halo spin increases, the buckling is also trigger…
In this work we analyse the structural and photometric properties of 21 barred simulated galaxies from the Auriga Project. These consist of Milky Way-mass magneto-hydrodynamical simulations in a $Λ$CDM cosmological context. In order to compare with observations, we generate synthetic SDSS-like broad-band images from the numerical data at z = 0 with different inclinations (from face-on to edge-on). Ellipse fits are used to determine the bar lengths, and 2D bulge/disc/bar decompositions with galfit are also performed, modelling the bar component with the modified Ferrer profile. We find a wide r…
We demonstrate that growth of stellar bars in spinning dark matter halos is heavily suppressed in the secular phase of evolution, using numerical simulations of isolated galaxies. In a representative set of models, we show that for values of the cosmological spin parameter lambda > 0.03, bar growth (in strength and size) becomes increasingly quenched. Furthermore, slowdown of bar pattern speed weakens substantially with increasing `lambda,' until it ceases completely. The terminal structure of bars is affected as well, including extent and shape of their boxy/peanut bulges. The essence of this…
Using N-body simulations we study the formation and evolution of tidally induced bars in disky galaxies in clusters. Our progenitor is a massive, late-type galaxy similar to the Milky Way, composed of an exponential disk and an NFW dark matter halo. We place the galaxy on four different orbits in a Virgo-like cluster and evolve it for 10 Gyr. As a reference case we also evolve the same model in isolation. Tidally induced bars form on all orbits soon after the first pericenter passage and survive until the end of the evolution. They appear earlier, are stronger, longer and have lower pattern sp…
Bars play a major role in driving the evolution of disk galaxies and in shaping their present properties. They cause angular momentum to be redistributed within the galaxy, emitted mainly from (near-)resonant material at the inner Lindblad resonance of the bar, and absorbed mainly by (near-)resonant material in the spheroid (i.e., the halo and, whenever relevant, the bulge) and in the outer disk. Spheroids delay and slow down the initial growth of the bar they host, but, at the later stages of the evolution, they strengthen the bar by absorbing angular momentum. Increased velocity dispersion i…
We study the clustering properties of barred galaxies using data from the Sloan Digital Sky Survey (SDSS). We compute projected redshift-space two-point cross-correlation functions w_p(r_p) for a sample of nearly 1000 galaxies for which we have performed detailed structural decompositions using the methods described in Gadotti (2009). The sample includes 286 barred galaxies. The clustering of barred and unbarred galaxies of similar stellar mass is indistinguishable over all the scales probed (~20kpc - 30Mpc). This result also holds even if the sample is restricted to bars with bluer g-i colour…
Numerical simulations show that box-shaped bulges of edge-on galaxies are not bulges: they are bars seen side-on. Therefore the two components that are seen in edge-on Sb galaxies such as NGC 4565 are a disk and a bar. But face-on SBb galaxies always show a disk, a bar, and a (pseudo)bulge. Where is the (pseudo)bulge in NGC 4565? We use archival Hubble Space Telescope H-band images and Spitzer Space Telescope 3.6 micron wavelength images, both calibrated to 2MASS K_s band, to penetrate the prominent dust lane in NGC 4565. We find a high surface brightness, central stellar component that is cle…
This paper is the third which examines galaxy morphology from the point of view of comprehensive de Vaucouleurs revised Hubble-Sandage (CVRHS) classification, a variation on the original de Vaucouleurs classification volume that accounts for finer details of galactic structure, including lenses, nuclear structures, embedded disks, boxy and disky components, and other features. The classification is applied to the EFIGI sample, a well-defined set of nearby galaxies which were previously examined by Baillard et al. and de Lapparent et al. The survey is focussed on statistics of features, and bri…
We study the bar-driven dynamics in the inner part of the Milky Way by using invariant manifolds. This theory has been successfully applied to describe the morphology and kinematics of rings and spirals in external galaxies, and now, for the first time, we apply it to the Milky Way. We compute the orbits confined by the invariant manifolds of the unstable periodic orbits located at the ends of the bar. We discuss whether the COBE/DIRBE bar and the Long bar compose a single bar or two independent bars and perform a number of comparisons which, taken together, argue strongly in favour of the for…
When bars and spirals conspire: recurrent build-up of the nuclear regions of disc galaxies
LIRA, Observatoire de Paris, Université PSL, Sorbonne Université, Université Paris Cité, CY Cergy Paris Université, CNRS（拉格朗日天体物理与宇宙学实验室，巴黎天文台，巴黎文理研究大学，索邦大学，巴黎西岱大学，塞吉-蓬图瓦兹大学，法国国家科学研究中心）；Leibniz-Institut für Astrophysik Potsdam (AIP)（波茨坦莱布尼茨天体物理研究所）；Dipartimento di Fisica e Astronomia “Galileo Galilei”, Università di Padova（帕多瓦大学伽利略·伽利莱物理与天文学系）；Istituto Nazionale di Astrofisica - Osservatorio Astronomico di Padova（意大利国家天体物理研究所帕多瓦天文台）；Dipartimento di Tecnica e Gestione dei Sistemi Industriali, Università degli Studi di Padova（帕多瓦大学工业系统技术与管理系）；Division of Astrophysics, Department of Physics, Lund University（隆德大学物理学系天体物理分部）；LUX, Observatoire de Paris, PSL Research University, Sorbonne Université, CNRS（拉格朗日宇宙学实验室，巴黎天文台，巴黎文理研究大学，索邦大学，法国国家科学研究中心）；Collège de France（法兰西公学院）；Université Côte d’Azur, Observatoire de la Côte d’Azur, Laboratoire Lagrange, CNRS（蔚蓝海岸大学，蔚蓝海岸天文台，拉格朗日实验室，法国国家科学研究中心）
The Spitzer Survey of Stellar Structure in Galaxies (S4G) is the largest available database of deep, homogeneous middle-infrared (mid-IR) images of galaxies of all types. The survey, which includes 2352 nearby galaxies, reveals galaxy morphology only minimally affected by interstellar extinction. This paper presents an atlas and classifications of S4G galaxies in the Comprehensive de Vaucouleurs revised Hubble-Sandage (CVRHS) system. The CVRHS system follows the precepts of classical de Vaucouleurs (1959) morphology, modified to include recognition of other features such as inner, outer, and n…
Boxy, peanut- or X-shaped "bulges" are observed in a large fraction of barred galaxies viewed in, or close to, edge-on projection, as well as in the Milky Way. They are the product of dynamical instabilities occurring in stellar bars, which cause the latter to buckle and thicken vertically. Recent studies have found nearby galaxies that harbour two such features arising at different radial scales, in a nested configuration. In this paper we explore the formation of such double peanuts, using a collisionless N-body simulation of a pure disc evolving in isolation within a live dark matter halo, …
We discuss the results of the first model of the gas dynamics in the Milky Way in the presence of two bars: the large scale primary bar or boxy bulge and a secondary bar in the Galactic center region. We have obtained an accurate potential by modeling 2MASS star counts and we have used this potential to simulate the gas dynamics. As a first approximation we have used one single pattern speed Ω_p. The models with Omega_p=30-40 \kmskpc and a primary bar orientation of 20-35 deg reproduce successfully many characteristics of the observed longitude-velocity diagrams as the terminal velocity curve …
