Metal-semiconductor contacts are a pillar of modern semiconductor technology. Historically, their microscopic understanding has been hampered by the inability of traditional analytical and numerical methods to fully capture the complex physics governing their operating principles. Here we introduce an atomistic approach based on density functional theory and non-equilibrium Green's function, which includes all the relevant ingredients required to model realistic metal-semiconductor interfaces and allows for a direct comparison between theory and experiments via I-V bias curves simulations. We apply this method to characterize an Ag/Si interface relevant for photovoltaic applications and study the rectifying-to-Ohmic transition as function of the semiconductor doping.We also demonstrate that the standard "Activation Energy" method for the analysis of I-V bias data might be inaccurate for non-ideal interfaces as it neglects electron tunneling, and that finite-size atomistic models have problems in describing these interfaces in the presence of doping, due to a poor representation of space-charge effects. Conversely, the present method deals effectively with both issues, thus representing a valid alternative to conventional procedures for the accurate characterization of metal-semiconductor interfaces.
For analyzing quantum transport in semiconductor devices, accurate electronic structures are critical for quantitative predictions. Here we report theoretical analysis of electronic structures of all III-V zinc-blende semiconductor compounds. Our calculations are from density functional theory with the semi-local exchange proposed recently [F. Tran and P. Blaha, Phys. Rev. Lett. 102, 226401 (2009)], within the linear muffin tin orbital scheme. The calculated band gaps and effective masses are compared to experimental data and good quantitative agreement is obtained. Using the theoretical schem…
An approach is presented for the atomistic study of phonon transport in real dielectric nanowires via Green functions. The formalism is applied to investigate the phonon flow through nanowires coated by an amorphous material. Examples for a simple model system, and for real Si nanowires coated by silica are given. New physical results emerge for these systems, regarding the character of the transition from ballistic to diffusive transport, the low temperature thermal conductance, and the influence of the wire-coating interface on the thermal transport. An efficient treatment of phonon scatteri…
The wave function and binding energy for shallow donors in GaAs are calculated within the tight binding (TB) approach, for supercells containing up to two million atoms. The resulting solutions, coupled with a scaling law, allow extrapolation to the bulk limit. A sharp shallow-deep transition is obtained as the impurity perturbation increases. The model allows investigating the quantitative consistency between the effective mass theory and the TB formalism. Although the calculated binding energies are in excellent agreement, anisotropies and the overall decay obtained in the TB envelope functi…
We present an approach to calculate ballistic phonon transport that combines the atomistic Green's function (AGF) method with ab initio results. For the inter atomic potential we use the harmonic approach. The equilibrium positions of the atoms and the inter atomic force constants(ifcs) are calculated using the ABINIT program package, which is based on density functional theory. Therefore, the presented approach is parameter free. From the Green's function of the system we determine the density of states as well as the transmission function. The thermal conductance is obtained within the linea…
Phonon transmission across interfaces of dissimilar materials has been studied intensively in the recent years by using atomistic simulation tools owing to its importance in determining the effective thermal conductivity of nanostructured materials. Atomistic Green's function (AGF) method with interatomic force constants from the first-principles (FP) calculations has evolved to be a promising approach to study phonon transmission in many not well-studied material systems. However, the direct FP calculation for interatomic force constants becomes infeasible when the system involves atomic diso…
The dynamical behavior of the magnetism of diluted magnetic semiconductors (DMS) has been investigated by means of atomistic spin dynamics simulations. The conclusions drawn from the study are argued to be general for DMS systems in the low concentration limit, although all simulations are done for 5% Mn-doped GaAs with various concentrations of As antisite defects. The magnetization curve, $M(T)$, and the Curie temperature $T_C$ have been calculated, and are found to be in good correspondence to results from Monte Carlo simulations and experiments. Furthermore, equilibrium and non-equilibrium…
We employ a self-consistent Green's function approach to investigate the spin-wave relaxation Γ(p) in diluted magnetic semiconductors. We find the trend of the spin-wave relaxation strongly depends on the ratio of the itinerant and impurity spin densities. For density ratios in the Ruderman-Kittel-Kasuya-Yosida phase, Γ(p) decreases even though thermal fluctuations increase. On the other hand, in the strong coupling phase, an interesting peak structure appears. We discuss the implications of our numerical results for experiments.
Disordered elemental semiconductors, most notably a-C and a-Si, are ubiquitous in a myriad of different applications. These exploit their unique mechanical and electronic properties. In the past couple of decades, density functional theory (DFT) and other quantum mechanics-based computational simulation techniques have been successful at delivering a detailed understanding of the atomic and electronic structure of crystalline semiconductors. Unfortunately, the complex structure of disordered semiconductors sets the time and length scales required for DFT simulation of these materials out of re…
In weakly interacting organic semiconductors, static and dynamic disorder often have an important impact on transport properties. Describing charge transport in these systems requires an approach that correctly takes structural and electronic fluctuations into account. Here, we present a multiscale method based on a combination of molecular dynamics simulations, electronic structure calculations, and a transport theory that uses time-dependent non-equilibrium Green's functions. We apply the methodology to investigate the charge transport in C$_{60}$-containing self-assembled monolayers (SAMs),…
A thorough understanding of native oxides is essential for designing semiconductor devices. Here we report a study of the rate and mechanisms of spontaneous oxidation of bulk single crystals of ZrS$_x$Se$_{2-x}$ alloys and MoS$_2$. ZrS$_x$Se$_{2-x}$ alloys oxidize rapidly, and the oxidation rate increases with Se content. Oxidation of basal surfaces is initiated by favorable O$_2$ adsorption and proceeds by a mechanism of Zr-O bond switching, that collapses the van der Waals gaps, and is facilitated by progressive redox transitions of the chalcogen. The rate-limiting process is the formation a…
We present experimental measurements of the thermal boundary conductance (TBC) from $77 - 500$ K across isolated heteroepitaxially grown ZnO films on GaN substrates. These data provide an assessment of the assumptions that drive the phonon gas model-based diffuse mismatch models (DMM) and atomistic Green's function (AGF) formalisms for predicting TBC. Our measurements, when compared to previous experimental data, suggest that the TBC can be influenced by long wavelength, zone center modes in a material on one side of the interface as opposed to the "vibrational mismatch" concept assumed in the…
We analytically study phonon transmission and localization in random superlattices by using a Green's function approach. We derive expressions for the average transmission rate and localization length, or Lyapunov exponent, in terms of the superlattice structure factor. This is done by considering the backscattering of phonons, due to the complex mass density fluctuations, which incorporates all of the forward scattering processes. These analytical results are applied to two types of random superlattices and compared with numerical simulations based on the transfer matrix method. Our analytica…
Excitonic contributions to absorption and photocurrent generation in semiconductor nanostructures are described theoretically and simulated numerically using steady-state non-equilibrium Green's function theory. In a first approach, the coherent interband polarization including Coulomb corrections is determined from a Bethe-Salpeter-type equation for the equal time interband single-particle charge carrier Green's function. The effects of excitonic absorption on photocurrent generation are considered on the same level of approximation via the derivation of the corresponding corrections to the e…
Employing the self-consistent Green's function approach, we studied the temperature dependence of the spin-wave stiffness in diluted magnetic semiconductors. Note that the Green's function approach includes the spatial and temperature fluctuations simultaneously which was not possible within conventional Weiss mean-field theory. It is rather interesting that we found the stiffness becomes dramatically softened as the critical temperature is approached, which seems to explain the mysterious sharp drop of magnetization curves in samples within diffusive regime.
Conceptual 2D group III nitrides and oxides (e.g., 2D InN and 2D InO) in heterostructures with graphene have been realized by metalorganic chemical vapor deposition (MOCVD). MOCVD is credited with being central to fabrication of established semiconductor materials and by purpose for an advance in emergent semiconductor materials at the 2D limit. A defining characteristic of MOCVD is the employment of metalorganic precursors such as trimethyl-indium, -gallium, and -aluminum, which contain (strong) metal-carbon bonds. Mechanisms that regulate MOCVD processes at the atomic scale are largely unkno…
This paper studies the bond valence method (BVM) and its application in the non-isovalent semiconductor alloy (GaN)$_{\rm{1-x}}$(ZnO)$_{\rm{x}}$. Particular attention is paid to the role of short-range order (SRO). A physical interpretation based on atomic orbital interaction is proposed and examined by density-functional theory (DFT) calculations. Combining BVM with Monte-Carlo simulations and a DFT-based cluster expansion model, bond-length distributions and bond-angle variations are predicted. The correlation between bond valence and bond stiffness is also revealed. Finally the concept of b…
The paper reports on a theoretical description of work function of TiN, which is one of the most used materials for the realization of electrodes and gates in CMOS devices. Indeed, although the work function is a fundamental quantity in quantum mechanics and also in device physics, as it allows the understanding of band alignment at heterostructures and gap states formation at the metal/semiconductor interface, the role of defects and contaminants is rarely taken into account. Here, by using first principles simulations, we present an extensive study of the work function dependence on nitrogen…
Large-scale atomistic calculations, using empirical potentials for modeling semiconductors, have been performed on a stressed system with linear surface defects like steps. Although the elastic limits of systems with surface defects remain close to the theoretical strength, the results show that these defects weaken the atomic structure, initializing plastic deformations, in particular dislocations. The character of the dislocation nucleated can be predicted considering both the resolved shear stress related to the applied stress orientation and the Peierls stress. At low temperature, only gli…
We present an atomistic-continuum model to simulate ultrashort laser-induced melting processes in semiconductor solids on the example of silicon. The kinetics of transient non-equilibrium phase transition mechanisms is addressed with a Molecular Dynamics method at atomic level, whereas the laser light absorption, strong generated electron-phonon non-equilibrium, fast diffusion and heat conduction due to photo-excited free carriers are accounted for in the continuum. We give a detailed description of the model, which is then applied to study the mechanism of short laser pulse melting of free st…
Chu et al. recently reported extensive results of local density approximation (LDA) and of four (4) different Green function and dressed Coulomb (GW) approximation calculations of electronic properties of several semiconductors and insulators [Phys. Rev. B 93, 125210 (2016)].
We report the results of density functional theory (DFT) based calculations on monolayer and bilayer green phosphorene and their heterostructures with MoSe2. Both monolayer and bilayer green phosphorene are direct band gap semiconductors and possess anisotropic carrier mobility as high as 10^{4} cm^{2}V^{-1}s^{-1}. In bilayers, pressure of about 9 GPa induces the semiconductor-metal transition. Moreover, the band gap depends strongly on the thickness of the films and the external electric field. By employing strain-engineering under suitable solution conditions, monolayer and AC-stacked bilaye…
We study the surface elastic response of pure Ni, the random alloy FeNiCr and an average FeNiCr alloy in terms of the surface lattice Green's function. We propose a scheme for computing per-site Green's function and study their per-site variations. The average FeNiCr alloy accurately reproduces the mean Green's function of the full random alloy. Variation around this mean is largest near the edge of the surface Brillouin-zone and decays as $q^{-2}$ with wavevector $q$ towards the $Γ$-point. We also present expressions for the continuum surface Green's function of anisotropic solids of finite a…
The effect of realistic metal electronic structure on the lower limit of resistivity in [100] oriented n-Si is investigated using full band Density Functional Theory and Semi-Empirical Tight Binding (TB) calculations. Using simulation unit cells guided by the interface chemistry of epitaxial CoSi2 on [100] oriented Si observed experimentally, it is shown that the 'ideal metal' assumption fails in some situations and consequently underestimates the lower limit of contact resistivity in n-Si by at least an order of magnitude at high doping concentrations. The mismatch in transverse momentum spac…
Investigating quasiparticle excitations of molecules on surfaces through photoemission spectroscopy forms a major part of nanotechnology research. Resolving spectral features at these interfaces requires a comprehensive theory of electron removal and addition processes in molecules and solids which captures the complex interplay of image charges, thermal effects and configurational disorder. We here develop such a theory and calculate the quasiparticle energy-level alignment and the valence photoemission spectrum for the prototype biomimetic solar cell interface between anatase TiO2 and the N3…
A hidden bulk polymorph governs charge transport dimensionality in an organic semiconductor
University of Bologna（博洛尼亚大学）；Grenoble Alpes University, CNRS, Grenoble INP, Institut Néel（格勒诺布尔阿尔卑斯大学、法国国家科学研究中心、格勒诺布尔理工学院、内埃尔研究所）；Institute of Solid State Physics, Graz University of Technology（格拉茨工业大学固体物理研究所）；Max Planck Institute for Polymer Research（马克斯·普朗克聚合物研究所）；Ca' Foscari University of Venice（威尼斯卡福斯卡里大学）；Utrecht University（乌得勒支大学）；Leiden University（莱顿大学）
We report the first ever accurate theoretical prediction of thermal conductance of any material interface. Thermal interfacial conductance of aluminum (Al)-sapphire (α-Al2O3) interface along crystal directions (111) Al || (0001) Al2O3 for temperature ranging from 50-500 K is calculated using two fundamentally different methods: interfacial conductance modal analysis (ICMA) and atomistic green function (AGF). While AGF overpredicts interfacial conductance, both the quantitative and qualitative predictions of ICMA are exceptional when compared with the time-domain thermoreflectance (TDTR) experi…
The precise knowledge of the atomic order in monocrystalline alloys is fundamental to understand and predict their physical properties. With this perspective, we utilized laser-assisted atom probe tomography to investigate the three-dimensional distribution of atoms in non-equilibrium epitaxial Sn-rich group IV SiGeSn ternary semiconductors. Different atom probe statistical analysis tools including frequency distribution analysis, partial radial distribution functions, and nearest neighbor analysis were employed in order to evaluate and compare the behavior of the three elements to their spati…
We present an efficient implementation of a surface Green's-function method for atomistic modeling of surfaces within the framework of density functional theory using a pseudopotential localized basis set approach. In this method, the system is described as a truly semi-infinite solid with a surface region coupled to an electron reservoir, thereby overcoming several fundamental drawbacks of the traditional slab approach. The versatility of the method is demonstrated with several applications to surface physics and chemistry problems that are inherently difficult to address properly with the sl…
On the basis of the Green function method, analytical solutions of the diffusion equation which describes nonstationary migration of nonequilibrium interstitial impurity atoms have been derived. It is supposed that the initial distribution of nonequilibrium impurity interstitials is formed due to ion implantation and, therefore, is described by the Gaussian function. The condition of the constant concentration of impurity interstitials (the Dirichlet boundary condition) or reflecting boundary condition was imposed on the surface of a semiconductor. The Dirichlet boundary condition was also enf…
We show how to describe Coulomb renormalization effects and dielectric screening in semiconductors and semiconductor nanostructures within a first-principles density-matrix description. Those dynamic variables and approximation schemes which are required for a proper description of dielectric screening are identified. It is shown that within the random-phase approximation the direct Coulomb interactions become screened, with static screening being a good approximation, whereas the electron-hole exchange interactions remain unscreened. Differences and similarities of our results with those obta…
The stability of interfaces and the mechanisms of thin film growth on semiconductors are issues of central importance in electronic devices. These issues can only be understood through detailed study of the relevant microscopic processes. Experimental studies are able to provide detailed, atomic scale information for model systems. Theoretical analysis of experimental results is essential in explaining certain surprising observations and in providing guidance for optimizing conditions and methods of growth. We review recent theoretical work on the diffusion of adatoms, the structure of adsorba…
Atomistic Insights into Cu/amorphous-Ta$_x$N Interfacial Adhesion via Machine Learning Interatomic Potentials: Effects of Stoichiometry and Interface Construction
We investigate electronic transport properties of the squashed armchair carbon nanotubes, using tight-binding molecular dynamics and Green's function method. We demonstrate a metal-to-semiconductor transistion while squashing the nanotubes and a general mechanism for such transistion. It is the distinction of the two sublattices in the nanotube that opens an energy gap near the Fermi energy. We show that the transition has to be achieved by a combined effect of breaking of mirror symmetry and bond formation between the flattened faces in the squashed nanotubes.
The electronic structure of nanowires in contact with metallic electrodes of experimentally relevant sizes is calculated by incorporating the electrostatic polarization potential into the atomistic single particle Schrödinger equation. We show that the presence of an electrode produces localized electron/hole states near the electrode, a phenomenon only exhibited in nanostructures and overlooked in the past. This phenomenon will have profound implications on electron transport in such nanosystems. We calculate several electrode/nanowire geometries, with varying contact depths and nanowire radi…
Atomic scale nanowires attract enormous interest in a wide range of fields. On the one hand, due to their quasi-one-dimensional nature, they can act as a experimental testbed for exotic physics: Peierls instability, charge density waves, and Luttinger liquid behavior. On the other hand, due to their small size, they are of interest for future device applications in the micro-electronics industry, but also for applications regarding molecular electronics. This versatile nature makes them interesting systems to produce and study, but their size and growth conditions push both experimental produc…
In this work we study and contrast implicit solvation models against explicit atomistic, quantum mechanical models in the description of the band alignment of semiconductors in aqueous environment, using simulations based on density functional theory. We find consistent results for both methods for 9 different terminations across 6 different materials whenever the first solvation shell is treated explicitly, quantum mechanically. Interestingly this first layer of explicit water is more relevant when water is adsorbed but not dissociated, hinting at the importance of saturating the surface with…
The control of phonon scattering by interfaces is critical to the manipulation of heat conduction in composite materials and semiconducting nanostructures. However, one of the factors limiting our understanding of elastic phonon scattering is the lack of a computationally efficient approach for describing the phenomenon in a manner that accounts for the atomistic configuration of the interface and the exact bulk phonon dispersion. Building on the atomistic Green's function (AGF) technique for ballistic phonon transport, we formulate an atomistic S-matrix method that treats bulk phonon modes as…
Charge and thermal conductivities are the most important parameters of carbon nanomaterials as candidates for future electronics. In this paper we address the effects of Anderson type disorder in long semiconductor carbon nanotubes (CNTs) to electron charge conductivity and lattice thermal conductivity using the atomistic Green function approach. The electron and phonon transmissions are analyzed as a function of the length of the disordered nanostructures. The thermal conductance as a function of temperature is calculated for different lengths. Analysis of the transmission probabilities as a …
We propose the 14-band $\mathbf k \cdot \mathbf p$ model to calculate spin-orbit splittings of the valence subbands in semiconductor quantum wells. The reduced symmetry of quantum well interfaces is incorporated by means of additional terms in the boundary conditions which mix the $Γ_{15}$ conduction and valence Bloch functions at the interfaces. It is demonstrated that the interface-induced effect makes the dominating contribution to the heavy-hole spin splitting. A simple analytical expression for the interface contribution is derived. In contrast to the 4$\times$4 effective Hamiltonian mode…
A series of III-V ternary and quarternary digital alloy avalanche photodiodes (APDs) have recently been seen to exhibit very low excess noise. Using band inversion of an environment-dependent atomistic tight binding description of short period superlattices, we argue that a combination of increased effective mass, minigaps and band split-off are primarily responsible for the observed superior performance. These properties significantly limit the ionization rate of one carrier type, either holes or electrons, making the avalanche multiplication process unipolar in nature. The unipolar behavior …
Engineering of phonons, i.e., collective lattice vibrations in crystals, is essential for manipulating physical properties of materials such as thermal transport, electron-phonon interaction, confinement of lattice vibration, and optical polarization. Most approaches to phonon-engineering have been largely limited to the high-quality heterostructures of typical semiconductors. Yet, artificial engineering of phonons in a variety of materials with functional properties, such as complex oxides, will yield unprecedented applications of coherent tunable phonons in future quantum acoustic devices. I…
A first-principle model is proposed to study the electrostatic properties of a double-gated silicon slab of nano scale in the framework of density functional theory. The applied gate voltage is approximated as a variation of the electrostatic potential on the boundary of the supercell enclosing the system. With the electron density estimated by the real space Green's functions, efficient multigrid and fast Fourier Poisson solvers are employed to calculate the electrostatic potential from the charge density. In the representation of localized SIESTA linear combination of atomic orbitals, the Ko…
We predict that the Curie temperature of a ferromagnetic resonant tunneling diode will decrease abruptly, by approximately a factor of two, when the downstream chemical potential falls below the quantum well resonance energy. This property follows from elementary quantum transport theory notions combined with a mean field description of diluted magnetic semiconductor ferromagnetism. We illustrate this effect by solving coupled non-equilibrium Green's function, magnetic mean-field, and electrostatic Poisson equations self-consistently to predict the bias voltage and temperature dependence of th…
Armchair nanotubes of MoS2 and WS2 offer a sizeable band gap, with the advantage of a one dimensional (1D) electronic material, but free from edge roughness and thermodynamic instability of nanoribbons. Use of such semiconducting MX2 (MoS2, WS2) armchair nanotubes (NTs) in conjunction with metallic carbon nanotubes (CNT) could prove useful for nanoelectronics and photonics applications. In this work atomistic simulations of MoS2 NT-CNT and WS2 NT-CNT junctions are carried out to study the physics of such junctions. With density functional theory (DFT) we study the carrier density distribution,…
The controllability of charge transport through an organic molecular spin-valve system is theoretically investigated on the basis of a Su-Schrieffer-Heeger model combined with the non-equilibrium Green's function formalism. We show how the formation of polaron in the organic sub-structure leads to a hysteretic conductance switching, via sweeping either the bias voltage or the electrochemical potential. We further obtain an exponential dependence of the magnetoresistance as a function of the applied bias voltage. The implications of calculated results in relation to experiments and device appli…
An atomistic insight into potential barrier formation and band bending at the interface between a metal and an n-type semiconductor is achieved by ab initio simulations and model analysis of a prototype Schottky diode, i.e., niobium doped rutile titania in contact with gold (Au/Nb:TiO$_2$). The local Schottky barrier height is found to vary between 0 and 1.26 eV depending on the position of the dopant. The band bending is caused by a dopant induced dipole field between the interface and the dopant site, whereas the pristine Au/TiO$_2$ interface does not show any band bending. These findings op…
A first principle theory of charge transport in spatially inhomogeneous quantum systems composed of any finite number of particles and subject to weak electro-magnetic fields is developed. Simple analytical expressions for the linear contributions to the quantum susceptibilities and conductivity tensors, and the charge and current densities of such systems are derived in terms of two-time Green's functions. The obtained results can be applied to description of quantum charge transport in any finite system, including small semiconductor quantum dots, artificial molecules and atoms, etc. PACS: 0…
The propagation of light in layered semiconductor media is described theoretically and simulated numerically within the framework of the non-equilibrium Green's function formalism as used for state-of-the-art nanodevice simulations, treating the non-local interaction of leaky photonic modes with the electronic states of thin semiconductor films on a non-equilibrium quantum statistical mechanics level of theory. For a diagonal photon self-energy corresponding to local coupling, the simulation results for a 500 nm GaAs slab under normal incidence are in excellent agreement with the predictions f…
