Decay of $^{210}$Po compound nucleus formed in light and heavy-ion induced fusion reactions has been analyzed simultaneously using a consistent prescription for fission barrier and nuclear level density incorporating shell correction and its damping with excitation energy. Good description of all the excitation functions have been achieved with a fission barrier of 21.9 $\pm$ 0.2 MeV. For this barrier height, the predicted statistical pre-fission neutrons in heavy-ion fusion-fission are much smaller than the experimental values, implying the presence of dynamical neutrons due to dissipation even at these low excitation energies ($\sim$ 50~MeV) in the mass region A $\sim$ 200. When only heavy-ion induced fission excitation functions and the pre-fission neutron multiplicities are included in the fits, the deduced best fit fission barrier depends on the assumed fission delay time during which dynamical neutrons can be emitted. A fission delay of (0.8 $\pm$ 0.1 )$\times 10^{-19}$ s has been estimated corresponding to the above fission barrier height assuming that the entire excess neutrons over and above the statistical model predictions are due to the dynamics. The present observation has implication on the study of fission time scale/ nuclear viscosity using neutron emission as a probe.
We employ density-dependent relativistic mean-field theory to study how the triaxiality and pairing interaction affect the inner fission barriers of actinide nuclei. It was found that triaxiality reduced the inner fission barriers and improved agreement with experimental values for many actinides. However, about 1-2 MeV discrepancy to the experimental values still remained for some of the considered nuclei. Such a discrepancy could be made further smaller by increasing the BCS pairing strength parameter. In this work, we demonstrated that adjusting the paring strength was effective to reproduc…
We have studied strength in the BCS pairing force, used as a residual interaction to the relativistic mean-field to reproduce the height of the inner fission barriers for actinide nuclei. It was found that increasing the pairing strength by about 13% makes reproduce the inner fission barriers better over a wide range of actinide nuclei. This result was verified by using the moment-of-inertia of pairing rotational energy, which was introduced to avoid mean-field and odd-mass effects in the pairing interaction to deduce purely the pairing strength. The pairing interaction thus determined could s…
It is well known that most actinides fission into fragments of unequal size. The first attempt to understand this difference suggested that division leading to one of the fragments being near doubly magic $^{132}$Sn is favored by gain in binding energy. After the Strutinsky shell-correction method was developed an alternative idea that gained popularity was that the fission saddle might be lower for mass-asymmetric shapes and that this asymmetry was preserved until scission. Recently it was observed [Phys. Rev. Lett. {\bf 105} (2010) 252502] that $^{180}$Hg preferentially fissions asymmetrical…
Potential energy surfaces and fission barriers of superheavy nuclei are analyzed in the macroscopic-microscopic model. The Lublin-Strasbourg Drop (LSD) is used to obtain the macroscopic part of the energy, whereas the shell and pairing energy corrections are evaluated using the Yukawa-folded potential. A standard flooding technique has been used to determine the barrier heights. It was shown the Fourier shape parametrization containing only three deformation parameters reproduces well the nuclear shapes of nuclei on their way to fission. In addition, the non-axial degree of freedom is taken in…
Fusion-Fission of 16O+197Au at Sub-Barrier Energies
最近发现的远亚垒能重离子熔合阻碍现象引起了人们对这一现象的实验和理论研究的极大关注。大多数实验证据来自中重系统，如Ni+Ni到Zr+Zr，对于这些系统，化合物系统主要通过带电粒子蒸发衰变。然而，为了研究更重的系统，还必须测量衰变进入裂变碎片的部分。在目前的工作中，我们，因此，测量裂变截面的16 O +197 Au下降到前所未有的远亚势垒能量使用大位置敏感的PPAC放置在向后的角度。初步的截面将进行讨论，并在近势垒能量的早期研究进行比较。没有发现亚势垒阻碍的确凿证据，可能是因为测量没有扩展到足够低的能量。
A role of β-delayed neutron emission and fission in r-process nucleosynthesis attracts a high interest. Although the number of study on them covering r-process nuclei is increasing recently, uncertainties of β-delayed neutron and fission are still large for r-process simulations. Our purpose is to make a new database on β-delayed neutron emission and fission rates. To this end, the data that are not investigated experimentally have to be predicted. Microscopic theoretical approaches based on a nuclear energy density functional and statistical models are one of the competent tools for the predi…
Based on a systematic Hartree-Fock+BCS calculation, new perturbation scheme is proposed to modify the existing Skyrme-type effective nuclear force. Much attention is paid to have a better description of fission property of heavy nuclei. In terms of incorporating the nuclear medium effects on the fission barrier height more correctly, two typical Skyrme parameter sets (SkM* and SLy4) are modified. In conclusion, according to the comparison to experiments, the calculated fission barrier heights are improved by almost 90$\%$.
We study the ground state properties, potential energy curves and potential energy surfaces of the superheavy nucleus $^{270}$Hs by using the multidimensionally-constrained relativistic mean-field model with the effective interaction PC-PK1. The binding energy, size and shape as well as single particle shell structure corresponding to the ground state of this nucleus are obtained. $^{270}$Hs is well deformed and exhibits deformed doubly magic feature in the single neutron and proton level schemes. One-dimensional potential energy curves and two-dimensional potential energy surfaces are calcula…
Potential Energy Surfaces of Actinide Nuclei from a Multi-dimensional Constraint Covariant Density Functional Theory: Barrier Heights and Saddle Point Shapes
A direct and complete measurement of isotopic fission-fragment yields of $^{239}$U has been performed for the first time. The $^{239}$U fissioning system was produced with an average excitation energy of 8.3 MeV in one-neutron transfer reactions between a $^{238}$U beam and a $^{9}$Be target at Coulomb barrier energies. The fission fragments were detected and isotopically identified using the VAMOS++ spectrometer at the GANIL facility. This measurement allows to directly evaluate the fission models at excitation energies of fast neutrons, relevant for next-generation nuclear reactors. The pres…
The dynamics of low-energy induced fission is explored using a consistent microscopic framework that combines the time-dependent generator coordinate method (TDGCM) and time-dependent nuclear density functional theory (TDDFT). While the former presents a fully quantum mechanical approach that describes the entire fission process as an adiabatic evolution of collective degrees of freedom, the latter models the dissipative dynamics of the final stage of fission by propagating the nucleons independently toward scission and beyond. By combining the two methods, based on the same nuclear energy den…
We elucidated the reason why the average total kinetic energy (TKE) of fission fragments decreases when the excitation energy of the fissioning systems increases as indicated by experimental data for the neutron-induced fission events. To explore this problem, we used a method based on the four-dimensional Langevin equations we have developed. We have calculated the TKE of fission fragments for fissioning systems $^{236}$U$^{*}$ and $^{240}$Pu$^{*}$ excited above respective fission barriers, and compared the results with experimental data for n + $^{235}$U and n + $^{239}$Pu reactions, respect…
