动态蒙特卡罗(KMC)模拟研究非平衡系统的慢松弛。点缺陷引起的25千电子伏级联$α$ -Fe显示,导致一个特征的时间演变,所描述的\emph{replenish and relax}机制。然后,我们产生了一个原子为基础的评估模型,提出了解释缓慢的结构弛豫集中在10晶格参数$α$ -Fe盒,两个过程密切相关的级联退火,并表现出类似的时间签名的50个空位和25个自组装原子(SIA)的聚集。四个原子效应解释了演化中所涉及的时间尺度:缺陷浓度不均匀性,浓度增强的迁移率,团簇大小相关的键能和缺陷引起的压力。这些研究结果表明,两个主要类别的模型来解释缓慢的结构松弛,Eyring模型和吉布斯模型,都发挥了作用,以限制这些简单的点缺陷系统的松弛速率。
英文摘要:
On-the-fly kinetic Monte Carlo (KMC) simulations are performed to investigate slow relaxation of non-equilibrium systems. Point defects induced by 25 keV cascades in $α$-Fe are shown to lead to a characteristic time-evolution, described by the \emph{replenish and relax} mechanism. Then, we produce an atomistically-based assessment of models proposed to explain the slow structural relaxation by focusing on the aggregation of 50 vacancies and 25 self-interstital atoms (SIA) in 10-lattice-parameter $α$-Fe boxes, two processes that are closely related to cascade annealing and exhibit similar time signature. Four atomistic effects explain the timescales involved in the evolution: defect concentration heterogeneities, concentration-enhanced mobility, cluster-size dependent bond energies and defect-induced pressure. These findings suggest that the two main classes of models to explain slow structural relaxation, the Eyring model and the Gibbs model, both play a role to limit the rate of relaxation of these simple point-defect systems.
Unsupervised Machine-Learning Pipeline for Data-Driven Defect Detection and Characterisation: Application to Displacement Cascades
Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET - Unité Matériaux et Transformations(里尔大学,国家科学研究中心,法国国家农业研究科学与技术研究院,里尔中央理工大学,UMET单位);EM2VM, Joint laboratory Study and Modelling of the Microstructure for Ageing of Materials(EM2VM联合实验室,微结构老化材料研究与建模联合实验室);Univ. Lille, CNRS, UMR 8523 – PhLAM – Physique des Lasers Atomes et Molécules(里尔大学,国家科学研究中心,PhLAM单位)
Local chemical order suppresses grain boundary migration under irradiation in CrCoNi
University of California, Irvine(加州大学尔湾分校);Hopkins Extreme Materials Institute, Johns Hopkins University(约翰斯·霍普金斯大学霍普金斯极端材料研究所);Johns Hopkins University(约翰斯·霍普金斯大学)
Relaxation volumes of microscopic and mesoscopic irradiation-induced defects in tungsten
辐射引起的缺陷的低能量结构已被详细研究,因为这些决定了缺陷可以扩散或松弛的可用模式。因此,有许多关于可能的缺陷结构的相对能量的研究,并且经验势通常被拟合到这些能量或相对于这些能量进行评估。但最近[Dudarev et al Nuclear Fusion 2018],我们已经展示了如何根据辐射诱导缺陷集合的弹性特性来确定辐射下反应堆组件的应力、应变和膨胀。这些弹性性能受到的关注相对较少。在这里,我们评估松弛体积的辐照引起的缺陷在钨计算与经验电位,并比较密度泛函理论的结果可用。不同的经验势给出不同的结果,但可以确定弛豫体积的一些势独立的趋势。我们发现,小缺陷的弛豫体积可以预测到10%以内,从他们的点缺陷计数。对于较大的缺陷,我们提供经验适合作为尺寸的函数的弛豫体积。我们表明,与一个单一的初级损伤级联的弛豫体积可以估计从初级撞击原子(PKA)的能量。我们的结论是,虽然湮灭的空位和填隙性质的缺陷将不可避免地减少总的弛豫体积的级联碎片,经验电位不同意是否合并的缺陷将减少或增加总的弛豫体积。
Ultra-Slow Dynamic Annealing of Neutron-induced Defects in n-type Silicon: Role of Charge Carriers
用等注量(1 $\times$ 10 $^{10}$ cm $^{-2}$)和不同注量($2.5\times$ 10 $^5$ cm $^{-2}$ s $^{-1}$至$1\times$ 10 $^7$ cm $^{-2}$ s $^{-1}$)的中子轰击三种以n型硅为有源区的双极器件。基电流和输入偏置电流的测量值的增加被发现随中子通量的增加而减少,这意味着n型硅中双空位缺陷的动态退火的强度遵循正的通量依赖性。这种通量依赖性与使用质子的离子注入中观察到的通量依赖性相同,但是在我们的实验中明显的通量灵敏度比质子轰击的通量灵敏度低4个数量级,尽管两种粒子的质量和能量相似。质子轰击中大量的载流子的存在,提高了Si材料的扩散速度和缺陷团簇的解离速率,加速了缺陷的动态退火,从而导致了质子轰击过程中的通量范围的巨大差异。我们的工作将有助于理解硅中的缺陷退火过程。
Passivating Surface Defects and Reducing Interface Recombination in CuInS2 Solar Cells by a Facile Solution Treatment
University of Luxembourg(卢森堡大学);Luxembourg Institute of Science and Technology(卢森堡科学与技术研究所);Helmholtz-Zentrum Berlin für Materialien und Energie GmbH(柏林亥姆霍兹材料与能源中心有限公司)