arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1210.6875cond-mat.supr-conphysics.acc-ph
收藏

高温热处理对大晶粒超导射频铌腔品质因数的影响

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity

P. Dhakal, G. Ciovati, G. R. Myneni, K. E. Gray, N. Groll, P. Maheshwari, D. M. McRae, R. Pike, T. Proslier, F. Stevie, R. P. Walsh, Q. Yang, J. Zasadzinzki

摘要:

大晶粒铌已成为制备超导射频谐振腔的一种可行的替代品。在这方面的贡献,我们报告的结果从热处理研究的大晶粒1.5 GHz的单细胞腔的“中等纯度”铌。热处理前的基线表面制备包括标准缓冲化学抛光。在新设计的真空感应炉中进行了800 - 1400 ℃的热处理。在2.0 K和90 mT的峰值表面磁场(Bp)下,Q 0值的数量级为2 × 1010。在1400 ℃下热处理后,在2.0 K和Bp = 90 mT下获得的Q_0值为(5 ± 1)× 1010。这是在该温度、频率和磁场下报道的最高值。通过二次离子质谱、次级电子显微镜、能量色散X射线、点接触隧穿和X射线衍射分析了在1400 ℃下用腔热处理的样品,并揭示了复杂的表面组成,其包括氧化钛、增加的碳和氮含量,但与未热处理的样品相比降低了氢浓度。

英文摘要:

Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of "medium purity" Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment in the range 800 - 1400 C was done in a newly designed vacuum induction furnace. Q0 values of the order of 2x1010 at 2.0 K and peak surface magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0-value of (5+-1)1010 at 2.0 K and Bp = 90 mT was obtained after heat treatment at 1400 C. This is the highest value ever reported at this temperature, frequency and field. Samples heat treated with the cavity at 1400 C were analyzed by secondary ion mass spectrometry, secondary electron microscopy, energy dispersive X-ray, point contact tunneling and X-ray diffraction and revealed a complex surface composition which includes titanium oxide, increased carbon and nitrogen content but reduced hydrogen concentration compared to a non heat-treated sample.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑