Temperature dependence of the resistance switching effect studied on the metal/YBa2Cu3O6+x planar junctions
Milan Tomasek, Tomas Plecenik, Martin Truchly, Jaroslav Noskovic, Tomas Roch, Miroslav Zahoran, Stefan Chromik, Mariana Spankova, Peter Kus, Andrej Plecenik
Resistive switching (RS) effect observed in capacitor-like metal/insulator/metal junctions belongs to the most promising candidates for next generation of memory cell technology. It is based upon a sudden change of the junction resistance caused by an electric field applied to the metal electrodes. The aim of this work was to study this effect on the structure metal/YBCO6/YBCO7, where YBCO7 is a metallic phase and YBCO6 is an insulator phase which arises spontaneously by out-diffusion of oxygen from a few nanometers wide YBCO surface layer. Oriented YBa2Cu3O7 thin films were prepared by the method of magnetron sputtering and consequently planar structures with metal-YBCO junction were made by the means of the optical lithography, ion etching and vacuum evaporation. On these junctions we have studied the temperature dependence of the RS effect with I-V and dI/dV-V transport measurements down to liquid He temperature. We have determined temperature dependence of the RS effect threshold voltage in the temperature range 100-300 K and showed that this dependency is compatible with common idea of oxygen ions migration under electric field within the YBCO surface layer.
The longitudinal resistances of a six-terminal graphene p-n junction under a perpendicular magnetic field are investigated. Because of the chirality of the Hall edge states, the longitudinal resistances on top and bottom edges of the graphene ribbon are not equal. In the presence of suitable disorder, the top-edge and bottom-edge resistances well show the plateau structures in the both unipolar and bipolar regimes and the plateau values are determined by the Landau filling factors only. These plateau structures are in excellent agreement with the recent experiment. For the unipolar junction, t…
In large magnetoresistance devices spin torque-induced changes in resistance can produce GHz current and voltage oscillations which can affect magnetization reversal. In addition, capacitive shunting in large resistance devices can further reduce the current, adversely affecting spin torque switching. Here, we simultaneously solve the Landau-Lifshitz-Gilbert equation with spin torque and the transmission line telegrapher's equations to study the effects of resistance feedback and capacitance on magnetization reversal of both spin valves and magnetic tunnel junctions. While for spin valves para…
Using ab-initio methods we investigate the possibility of three-terminal graphene "T-junction" devices and show that these all-graphene edge contacts are energetically feasible when the 1D interface itself is free from foreign atoms. We examine the energetics of various junction structures as a function of the atomic scale geometry. Three-terminal equilibrium Green's functions are used to determine the transmission spectrum and contact resistance of the system. We find that the most symmetric structures have a significant binding energy, and we determine the contact resistances in the junction…
We demonstrate a device concept to fabricate resistance standards made of quantum Hall series arrays by using p-type and n-type graphene. The ambipolar nature of graphene allows fabricating series quantum Hall resistors without complex multi-layer metal interconnect technology, which is required when using conventional GaAs two-dimensional electron systems. As a prerequisite for a precise resistance standard we confirm the vanishing of longitudinal resistance across a p-n junction for metrological relevant current levels in the range of a few \muA.
Pulsed spin-torque switching has been studied using single-shot time-resolved electrical measurements in perpendicularly magnetized magnetic tunnel junctions as a function of pulse amplitude and junction size in 50 to 100 nm diameter circular junctions. The mean switching time depends inversely on pulse amplitude for all junctions studied. However, the switching dynamics is found to be strongly dependent on junction size and pulse amplitude. In 50 nm diameter junctions the switching onset is stochastic but the switching once started, is fast; after being initiated it takes less than 2 ns to sw…
We carry out a layer-by-layer investigation to understand electron transport across metal-insulator-metal junctions. Interfacial structures of junctions were studied and characterized using first-principles density functional theory within the generalized gradient approximation. We found that as a function of the number of crystal layers the calculated transmission coefficients of multilayer silicene junctions decay much slower than for BN-based junctions We revisited the semiclassical Boltzmann theory of electronic transport and applied to multilayer silicene and BN-based junctions. The calcu…
We report single-shot measurements of resistance versus time for thermally assisted spin-torque-driven switching in magnetic tunnel junctions. We achieve sufficient sensitivity to resolve the resistance signals leading up to switching, including the variations between individual switching events. Analyses of pre-switching thermal fluctuations allow detailed measurements of coherence times and variations in magnetization precession amplitude. We find that with a small in-plane hard-axis magnetic field the magnetization dynamics are more spatially coherent than for the case of zero field.
We demonstrate the reduction of critical spin-transfer torque (STT) switching currents in Co-Fe-B/MgO based magnetic tunnel junctions (MTJ) with perpendicular magnetization anisotropy (PMA). The junctions yield tunnel magnetoresistance (TMR) ratios of up to 64% at 4 monolayer (ML) tunnel barrier thickness. In this paper, the reduction of the critical switching current density is studied. By optimizing the applied bias field during DC-STT measurements, ultra low critical switching current densities of less than 20 kA/cm$^2$, even down to 9 kA/cm$^2$, are found. With the reduced switching curren…
We report on low-temperature transport study of a single layer graphene (SLG)-twisted bilayer graphene (tBLG) junction device. The SLG-tBLG junction in the device is grown by chemical vapor deposition and the device is fabricated in a Hall-bar configuration on Si/SiO$_2$ substrate. The longitudinal resistances across the SLG-tBLG junction (cross-junction resistances) on the two sides of the Hall bar and the Hall resistances of SLG and tBLG in the device are measured. In the quantum Hall regime, the measurements show that the measured cross-junction resistances exhibit a series of new quantized…
Negative differential resistance - a decrease in current with increasing bias voltage - is a counter-intuitive effect that is observed in various molecular junctions. Here, we present a novel mechanism that may be responsible for such an effect, based on strong Coulomb interaction between electrons in the molecule and electrons on the atoms closest to the molecule. The Coulomb interaction induces electron-hole binding across the molecule-electrode interface, resulting in a renormalized and enhanced molecule-electrode coupling. Using a self-consistent non-equilibrium Green's function approach, …
We experimentally demonstrated the optical responses of the switching currents in two types of Josephson tunnel junctions: Al/AlOx/Al and Nb/AlOx/Nb. The radiation-induced switching current shifts were measured at ultra-low bath temperature (T~16 mK). It is observed that the Al-junction has a more sensitive optical response than the Nb-junction, which is as expected since Al electrode has a smaller superconducting gap energy. The minimum detectable radiation powers with the present Al-junction and Nb-junction are 8 pW (corresponding to 8*10^5 incoming photons in one measurement cycle) and 2 nW…
An algorithm is introduced for predicting quantized resistances in graphene p-n junction devices that utilize more than a single entry and exit point for electron flow. Depending on the configuration of an arbitrary number of terminals, electrical measurements yield fractional multiples of the typical quantized Hall resistance at the $ν=2$ plateau $R_H \approx 12906 Ω$ and take the form: $\frac{a}{b}R_H$. This theoretical formulation is independent of material, and applications to other material systems that exhibit quantum Hall behaviors are to be expected. Furthermore, this formulation is su…
We consider a single molecule circuit embedded into solvent. The Born dielectric solvation model is combined with Keldysh nonequilibrium Green's functions to describe the electron transport properties of the system. Depending on the dielectric constant, the solvent induces multiple nonequilibrium steady states with corresponding hysteresis in molecular current-voltage characteristics as well as negative differential resistance. We identify the physical range of solvent and molecular parameters where the effects are present. The position of the negative differential resistance peak can be contr…
Current-voltage characteristics of planar junctions formed by an epitaxial c-axis oriented YBa2Cu3O7-x thin film micro-bridge and Ag counter-electrode were measured in the temperature range from 4.2 K to 300 K. A hysteretic behavior related to switching of the junction resistance from a high-resistive to a low-resistive state and vice-versa was observed and analyzed in terms of the maximal current bias and temperature dependence. The same effects were observed on a sub-micrometer scale YBa2Cu3O7-x thin film - PtIr point contact junctions using Scanning Tunneling Microscope. These phenomena are…
We propose a simple model of a nanoswitch as a memory resistor. The resistance of the nanoswitch is determined by electron tunneling through a nanoparticle diffusing around one or more potential minima located between the electrodes in the presence of Joule's heat dissipation. In the case of a single potential minimum, we observe hysteresis of the resistance at finite applied currents and a negative differential resistance. For two (or more) minima the switching mechanism is non-volatile, meaning that the memristor can switch to a resistive state of choice and stay there. Moreover, the noise s…
Combining insights from quantum chemistry calculations with master equations, we discuss a mechanism for negative differential resistance (NDR) in molecular junctions, operated in the regime of weak tunnel coupling. The NDR originates from an interplay of orbital spatial asymmetry and strong electron-electron interaction, which causes the molecule to become trapped in a non-conducting state above a voltage threshold. We show how the desired asymmetry can be selectively introduced in individual orbitals in e.g., OPE-type molecules by functionalization with a suitable side group, which is in lin…
We investigate switching of magnetic tunnel junctions (MTJs) driven by the thermal effect of the transport current through the junctions. The switching occurs in a specially designed composite free layer, which acts as one of the MTJ electrodes, and is due to a current-driven ferro-to-paramagnetic Curie transition with the associated exchange decoupling within the free layer leading to magnetic reversal. We simulate the current and heat propagation through the device and show how heat focusing can be used to improve the power efficiency. The Curie-switch MTJ demonstrated in this work has the a…
We study the effect that resistive regions have on the conductance of a quantum wire with interacting electrons which is connected to Fermi liquid leads. Using the bosonization formalism and a Rayleigh dissipation function to model the power dissipation, we use both scattering theory and Green's function techniques to derive the DC conductance. The resistive regions are generally found to lead to incoherent transport. For a single wire, we find that the resistance adds in series to the contact resistance of h/e^2 for spinless electrons, and the total resistance is independent of the Luttinger …
Graphene nanoribbons with armchair edges (AGNRs) have bandgaps that can be flexibly tuned via the ribbon width. A junction made of a narrower AGNR sandwiched between two wider AGNR leads was recently reported to possess two perfect transmission channels close to the Fermi level. Here, we report that by using a bias voltage to drive these transmission channels into the gap of the wider AGNR lead, we can obtain a negative differential resistance (NDR) effect. Owing to the intrinsic properties of the AGNR junctions, the on-set bias reaches as low as ~ 0.2 V and the valley current almost vanishes.…
Radiofrequency vortex spin-transfer oscillators based on magnetic tunnel junctions with very low resistance area product were investigated. A high power of excitations has been obtained characterized by a power spectral density containing a very sharp peak at the fundamental frequency and a series of harmonics. The observed behaviour is ascribed to the combined effect of spin transfer torque and Oersted-Ampère field generated by the large applied dc-current. We furthermore show that the synchronization of a vortex oscillation by applying a ac bias current is mostly efficient when the external …
We study current-induced switching in magnetic tunnel junctions (MTJs) in the presence of a field-like spin-transfer torque and titled pinned-layer magnetization in the high current limit at finite temperature. We consider both the Slonczewski and field-like torques with coefficients $a_J$ and $b_J $, respectively. At finite temperatures, $σ= b_J/a_J = \pm1$ leads to a smaller mean switching time compared that with $σ= 0$. The reduction of switching time in the presence of the field-like term is due to the alignment effect (for $σ> 0$) and the initial torque effect.
The use of multiple current terminals on millimeter-scale graphene $p-n$ junction devices fabricated with Corbino geometries, or quantum Hall resistance dartboards, have enabled the measurement of several fractional multiples of the quantized Hall resistance at the $ν=2$ plateau ($R_H\approx 12906 Ω$). Experimentally obtained values agreed with corresponding numerical simulations performed with the LTspice circuit simulator. More complicated designs of the quantum Hall resistance dartboard were simulated to establish the potential parameter space within which these Corbino-type devices could o…
The role of universal memory can be successfully satisfied by magnetic tunnel junctions (MTJs) where the writing mechanism is based on spin-transfer torque (STT). An improvement in the switching properties (lower switching current density maintaining the thermal stability) has been achieved in MTJs with interfacial perpendicular anisotropy (IPA) at the interface between CoFeB and MgO. In this paper, micromagnetic simulations point out the influence of IPA and saturation magnetization (MS) on the properties of fast magnetization reversal achieved in 5, 10 and 20 ns. Both cases of in-plane and o…
Just a few of the promising applications of graphene Corbino pnJ devices include two-dimensional Dirac fermion microscopes, custom programmable quantized resistors, and mesoscopic valley filters. In some cases, device scalability is crucial, as seen in fields like resistance metrology, where graphene devices are required to accommodate currents of the order 100 μA to be compatible with existing infrastructure. However, fabrication of these devices still poses many difficulties. In this work, unusual quantized resistances are observed in epitaxial graphene Corbino p-n junction devices held at t…
We study ns scale spin-torque-induced switching in perpendicularly magnetized tunnel junctions (pMTJ). Although the switching voltages match with the macrospin instability threshold, the electrical signatures of the reversal indicate the presence of domain walls in junctions of various sizes. In the antiparallel (AP) to parallel (P) switching, a nucleation phase is followed by an irreversible flow of a wall through the sample at an average velocity of 40 m/s with back and forth oscillation movements indicating a Walker propagation regime. A model with a single-wall locally responding to the sp…
We propose a new orbital controlled model to explain the gate field induced switching of current in a semiconducting PbS-nanowire junction. A single particle scattering formalism in conjunction with a posteriori density functional approach involving hybrid functional is used to study the electronic current; both first and higher order Stark effects are explicitly treated in our model. Our calculation reveals that after a threshold gate-voltage, orbital mixing produces p-components at the S atoms in the participating orbitals. This results in an inter-layer orbital interaction that allows elect…
We report on the observation of non-metallic electrical conduction, resistive switching, and a negative temperature coefficient of resistance in cluster-assembled nanostructured gold films above the electrical percolation and in strong-coupling regime, from room to cryogenic temperatures (24K). The structure of the films is characterized by an extremely high density of randomly oriented crystalline nanodomains, separated by grain boundaries. The observed behavior can be explained by considering space charge limited conduction and Coulomb blockade phenomena highlighting the influence of the hig…
Vibronic effects in resonant electron transport through single-molecule junctions are analyzed. The study is based on generic models for molecular junctions, which include electronic states on the molecular bridge that are vibrationally coupled and exhibit Coulomb interaction. The transport calculations employ a master equation approach. The results, obtained for a series of models with increasing complexity, show a multitude of interesting transport phenomena, including vibrational excitation, rectification, negative differential resistance (NDR) as well as local cooling. While some of these …
We simulate the spin torque-induced reversal of the magnetization in thin disks with perpendicular anisotropy at zero temperature. Disks typically smaller than 20 nm in diameter exhibit coherent reversal. A domain wall is involved in larger disks. We derive the critical diameter of this transition. Using a proper definition of the critical voltage, a macrospin model can account perfectly for the reversal dynamics when the reversal is coherent. The same critical voltage appears to match with the micromagnetics switching voltage regardless of the switching path.
Since the discovery of the spin orbit torque (SOT) induced by spin Hall effect in heavy metals, much effort has been devoted to understanding the mechanism of the charge-to-spin conversion as well as to developing new schemes for high speed, low energy magnetic recording technologies. While fast switching has been demonstrated in three terminal magnetic tunnel junctions (3T-MTJs) through applying short voltage pulses in the heavy metal channel, detailed understanding of the switching mechanism is lacking due to the complexity of the multi-layered magnetic structure and the three-terminal geome…
Measurements of fractional multiples of the ν=2 plateau quantized Hall resistance (R_H {\approx} 12906 Ω) were enabled by the utilization of multiple current terminals on millimetre-scale graphene p-n junction devices fabricated with interfaces along both lateral directions. These quantum Hall resistance checkerboard devices have been demonstrated to match quantized resistance outputs numerically calculated with the LTspice circuit simulator. From the devices' functionality, more complex embodiments of the quantum Hall resistance checkerboard were simulated to highlight the parameter space wit…
The relative contributions of in-plane (damping-like) and out-of-plane (field-like) spin-transfer-torques in the magnetization switching of out-of-plane magnetized magnetic tunnel junctions (pMTJ) has been theoretically analyzed using the transformed Landau-Lifshitz (LL) equation with the STT terms. It is demonstrated that in a pMTJ structure obeying macrospin dynamics, the out-of-plane torque influences the precession frequency but it does not contribute significantly to the STT switching process (in particular to the switching time and switching current density), which is mostly determined b…
We have demonstrated the millimeter-scale fabrication of monolayer epitaxial graphene $p-n$ junction devices using simple ultraviolet photolithography, thereby significantly reducing device processing time compared to that of electron beam lithography typically used for obtaining sharp junctions. This work presents measurements yielding nonconventional, fractional multiples of the typical quantized Hall resistance at $ν=2$ ($R_H\approx 12906 Ω$) that take the form: $\frac{a}{b}R_H$. Here, $a$ and $b$ have been observed to take on values such 1, 2, 3, and 5 to form various coefficients of $R_H$…
A novel mechanism for switching a molecular junction based on a proton transfer reaction triggered by an external electrostatic field is proposed. As a specific example to demonstrate the feasibility of the mechanism, the tautomers [2,5-(4-hydroxypyridine)] and {2,5-[4(1H)-pyridone]} are considered. Employing a combination of first-principles electronic structure calculations and Landauer transport theory, we show that both tautomers exhibit very different conductance properties and realize the "on" and "off" states of a molecular switch. Moreover, we provide a proof of principle that both for…
Josephson junctions and superconducting wires when probed with current pulses exhibit stochastic switching from superconducting to a stable non-zero voltage state. Electrical current dependence of the switching probability (so called S-curve) or switching current distribution is a fingerprint of the physics governing the escape process. This work addresses the criterion of independent switching event in a series of switching experiments. Treating Josephson junction as an electrical coin with current-tuned switching probability we investigate effect of correlation between switching events on th…
The Hall (RH) and bend (RB) resistance of a graphene Hall bar structure containing a pn-junction are calculated when in the ballistic regime. The simulations are done using the billiard model. Introducing a pn-junction--dividing the Hall bar geometry in two regions--leads to two distinct regimes exhibiting very different physics: 1) both regions are of n-type and 2) one region is n-type and the other p-type. In regime (1) a 'Hall plateau'--an enhancement of the resistance--appears for RH. On the other hand, in regime (2), we found a negative RH, which approaches zero for large B. The bend resi…
The quantum Hall and longitudinal resistances in multi-terminal ferromagnetic graphene p-n junctions under a perpendicular magnetic field are investigated. In the Hall measurements, the transverse contacts are assumed to be located at p-n interface to avoid the mixing of edge states at the interface and the resulting quantized resistances are then topologically protected. According to the charge carrier type, the resistances in four-terminal p-n junction can be naturally divided into nine different regimes. The symmetric Hall and longitudinal resistances are observed, with lots of new robust q…
Temperature plays an important role in spin torque switching of magnetic tunnel junctions causing magnetization fluctuations that decrease the switching voltage but also introduce switching errors. Here we present a systematic study of the temperature dependence of the spin torque switching probability of state-of-the-art perpendicular magnetic tunnel junction nanopillars (40 to 60 nm in diameter) from room temperature down to 4 K, sampling up to a million switching events. The junction temperature at the switching voltage---obtained from the thermally assisted spin torque switching model---sa…
Resistance switching devices are of special importance because of their application in resistive memories (RRAM) which are promising candidates for replacing current nonvolatile memories and realize storage class memories. These devices exhibit usually memristive properties with many discrete resistance levels and implement artificial synapses. The last years, researchers have demonstrated memristive chips as accelerators in computing, following new in-memory and neuromorphic computational approaches. Many different metal oxides have been used as resistance switching materials in MIM or MIS st…
We report the fabrication and measurement of top gated epitaxial graphene p-n junctions where exfoliated hexagonal boron nitride (h-BN) is used as the gate dielectric. The four-terminal longitudinal resistance across a single junction is well quantized at the von Klitzing constant R_K with a relative uncertainty of 10-7. After the exploration of numerous parameter spaces, we summarize the conditions upon which these devices could function as potential resistance standards. Furthermore, we offer designs of programmable electrical resistance standards over six orders of magnitude by using extern…
We report on an experimental study of current induced switching in perpendicular magnetic random access memory (MRAM) cells with variable resistance-area products (RAs). Our results show that in addition to spin transfer torque (STT), current induced self-heating and voltage controlled magnetic anisotropy also contribute to switching and can explain the RA dependencies of switching current density and STT efficiency. Our findings suggest that thermal optimization of perpendicular MRAM cells can result in significant reduction of switching currents.
Resistance switching effects in metal/perovskite contacts based on epitaxial c-axis oriented Y-Ba-Cu-O (YBCO) thin films with different crystallographic orientations have been studied. Three types of Ag/YBCO junctions with the contact restricted to (i) c-axis direction, (ii) ab-plane direction, and (iii) both were designed and fabricated, and their current-voltage characteristics have been measured. The type (i) junctions exhibited conventional bipolar resistance switching behavior, whereas in other two types the low-resistance state was unsteady and their resistance quickly relaxed to the ini…
