We simulate the spin torque-induced reversal of the magnetization in thin disks with perpendicular anisotropy at zero temperature. Disks typically smaller than 20 nm in diameter exhibit coherent reversal. A domain wall is involved in larger disks. We derive the critical diameter of this transition. Using a proper definition of the critical voltage, a macrospin model can account perfectly for the reversal dynamics when the reversal is coherent. The same critical voltage appears to match with the micromagnetics switching voltage regardless of the switching path.
We demonstrate efficient current induced spin orbit torque switching in perpendicularly magnetized epitaxial MgO(001)//Pd/Co2FeAl/MgO heterostructures grown by magnetron sputtering. The advantage of such heterostructures for spin orbit torque MRAM devices is that they allow a unique combination of critical ingredients: i) low resistivity required for reduced electric energy consumption during writing, ii) high TMR ratio required for efficient reading and iii) strong perpendicular magnetic anisotropy for increased thermal stability.
The oscillation properties of a spin torque oscillator consisting of a perpendicularly magnetized free layer and an in-plane magnetized pinned layer are studied based on an analysis of the energy balance between spin torque and damping. The critical value of an external magnetic field applied normal to the film plane is found, below which the controllable range of the oscillation frequency by the current is suppressed. The value of the critical field depends on the magnetic anisotropy, the saturation magnetization, and the spin torque parameter.
The magnetization dynamics of spin torque oscillator (STO) consisting of a perpendicularly magnetized free layer and an in-plane magnetized pinned layer was studied by solving the Landau-Lifshitz-Gilbert equation. We derived the analytical formula of the relation between the current and the oscillation frequency of the STO by analyzing the energy balance between the work done by the spin torque and the energy dissipation due to the damping. We also found that the field-like torque breaks the energy balance, and change the oscillation frequency.
We calculate the contribution to the spin transfer torque from sequential tunneling through impurities in a magnetic tunnel junction. For a junction with weakly polarized ferromagnetic contacts, the torque is found to be in the plane spanned by the magnetizations of the ferromagnetic contacts and proportional to $\sin θ$, where $θ$ is the angle between the magnetic moments. If the polarization is larger, the torque acquires a significant out-of-plane component and a different dependence on $θ$.
The field-free spin-orbit torque induced 180° reorientation of perpendicular magnetization is beneficial for the high performance magnetic memory. The antiferromagnetic material (AFM) can provide higher operation speed than the ferromagnetic counterpart. In this paper, we propose a trilayer AFM/Insulator/Heavy Metal structure as the AFM memory device. We show that the field-free switching of the AFM with perpendicular Néel vector can be achieved by using two orthogonal currents, which provide the uniform damping-like torque and stagger field-like torque, respectively. The reversible switching …
We theoretically study the current-induced spin torque in antiferromagnetic tunnel junctions, composed of two semi-infinite antiferromagnetic layers separated by a tunnel barrier, in both clean and disordered regimes. We find that the torque enabling the electrical manipulation of the Néel antiferromagnetic order parameter is out of plane $\sim {\bf n}\times{\bf p}$, while the torque competing with the antiferromagnetic exchange is in-plane $\sim {\bf n}\times({\bf p}\times{\bf n})$. Here, ${\bf { p}}$ and ${\bf { n}}$ are the Néel order parameter direction of the reference and free layers, re…
We demonstrate the reduction of critical spin-transfer torque (STT) switching currents in Co-Fe-B/MgO based magnetic tunnel junctions (MTJ) with perpendicular magnetization anisotropy (PMA). The junctions yield tunnel magnetoresistance (TMR) ratios of up to 64% at 4 monolayer (ML) tunnel barrier thickness. In this paper, the reduction of the critical switching current density is studied. By optimizing the applied bias field during DC-STT measurements, ultra low critical switching current densities of less than 20 kA/cm$^2$, even down to 9 kA/cm$^2$, are found. With the reduced switching curren…
A free electron description of spin-dependent tranport in magnetic tunnel junctions with non collinear magnetizations is presented. We investigate the origin of transverse spin density in tunnelling transport and the quantum interferences which give rise to oscillatory torques on the local magnetization. Spin transfer torque is also analyzed and an important bias asymmetry is found as well as a damped oscillatory behaviour. Furthermore, we investigate the influence of the s-d exchange coupling on torque in particular in the case of half-metallic MTJ in which the spin transfer torque is due to …
Non-equilibrium spin transport in a magnetic tunnel junction comprising a single magnetic layer in the presence of interfacial spin-orbit interaction (SOI) is studied theoretically. The interfacial SOI generates a spin torque of the form {\bf T}=T_{||}{\bf M}x({\bf z}x{\bf M})+T_{\bot}{\bf z}x{\bf M}, even in the absence of an external spin polarizer. For thick and large tunnel barriers, the torque reduces to the perpendicular component, $T_{\bot}$, which can be electrically tuned by applying a voltage across the insulator. In the limit of thin and low tunnel barriers, the in-plane torque $T_{…
Voltage-driven spin transfer torques in magnetic tunnel junctions provide an outstanding tool to design advanced spin-based devices for memory and reprogrammable logic applications. The non-linear voltage dependence of the torque has a direct impact on current-driven magnetization dynamics and on devices performances. After a brief overview of the progress made to date in the theoretical description of the spin torque in tunnel junctions, I present different ways to alter and control the bias dependence of both components of the spin torque. Engineering the junction (barrier and electrodes) st…
It is demonstrated by means of the optimal control theory that the energy cost of the spin-orbit torque induced reversal of a nanomagnet with perpendicular anisotropy can be strongly reduced by proper shaping of both in-plane components of the current pulse. The time-dependence of the optimal switching pulse that minimizes the energy cost associated with Joule heating is derived analytically in terms of the required reversal time and material properties. The optimal reversal time providing a tradeoff between the switching speed and energy efficiency is obtained. A sweet-spot balance between th…
We study deterministic magnetic reversal of a perpendicularly magnetized Co layer in a Co/MgO/Ta nano-square driven by spin Hall torque from an in-plane current flowing in an underlying Pt layer. The rate-limiting step of the switching process is domain-wall (DW) depinning by spin Hall torque via a thermally-assisted mechanism that eventually produces full reversal by domain expansion. An in-plane applied magnetic field collinear with the current is required, with the necessary field scale set by the need to overcome DW chirality imposed by the Dzyaloshinskii-Moriya interaction. Once Joule hea…
The dependence of tunneling magnetoresistance and spin-transfer torque in FeCo/MgO/FeCo tunnel junctions on the Co concentration and the bias voltage are investigated ab initio. We find that the tunneling magnetoresistance decreases with the Co concentration in contradiction with previous calculations but in agreement with recent experiments. This dependence is explained from bulk properties of the alloys. By using a realistic description of the disorder in the alloys we can show that even small amounts of disorder lead to a drastic drop in the tunneling magnetoresistance. This provides a quan…
We study ns scale spin-torque-induced switching in perpendicularly magnetized tunnel junctions (pMTJ). Although the switching voltages match with the macrospin instability threshold, the electrical signatures of the reversal indicate the presence of domain walls in junctions of various sizes. In the antiparallel (AP) to parallel (P) switching, a nucleation phase is followed by an irreversible flow of a wall through the sample at an average velocity of 40 m/s with back and forth oscillation movements indicating a Walker propagation regime. A model with a single-wall locally responding to the sp…
In a nanopillar with dipolarly coupled vortices, we present an experimental and simulation study to understand how the interplay between the bias field and spin transfer torque impacts reversal of the vortex cores. We find that, depending on the current values, vortex cores might experience different physical mechanisms for their reversal, namely a static or a dynamic switching. We believe that our results might be useful in the context of vortex based non volatile memories, as a current controlled selective core switching is proposed.
We study the adiabatic quantum pumping and quantum size effects of spin-torque in a magnetic tunnel junction within a scattering matrix approach. Quantum size effects are predicted in the presence of a dc bias as a function of the thickness of the normal metal layer inserted between two magnetic layers and of the fixed magnetic layer. In the presence of ac voltages, the results for the spin-torque show a peculiar magnification effect and advantages of spin-torque pumping in actual devices are also discussed.
We study the theoretical conditions to excite a stable self-oscillation in a spin torque oscillator with an in-plane magnetized free layer and a perpendicularly magnetized pinned layer in the presence of magnetic field pointing in an arbitrary direction. The linearized Landau-Lifshitz-Gilbert (LLG) equation is found to be inapplicable to evaluate the threshold between the stable and self-oscillation states because the critical current density estimated from the linearized equation is considerably larger than that found in the numerical simulation. We derive a theoretical formula of the thresho…
We propose the use of resonant tunneling as a route to enhance the spin-transfer torque switching characteristics of magnetic tunnel junctions. The proposed device structure is a resonant tunneling magnetic tunnel junction based on a MgO-semiconductor heterostructure sandwiched between a fixed magnet and a free magnet. Using the non-equilibrium Green's function formalism coupled self consistently with the Landau-Lifshitz-Gilbert-Slonczewski equation, we demonstrate enhanced tunnel magneto-resistance characteristics as well as lower switching voltages in comparison with traditional trilayer dev…
Memristors are non-volatile nano-resistors. Their resistance can be tuned by applied currents or voltages and set to a large number of levels between two limit values. Thanks to these properties, memristors are ideal building blocks for a number of applications such as multilevel non-volatile memories and artificial nano-synapses, which are the focus of this work. A key point towards the development of large scale memristive neuromorphic hardware is to build these neural networks with a memristor technology compatible with the best candidates for the future mainstream non-volatile memories. He…
GaMnAs-based magnetic tunnel junction (MTJ) devices are characterized by in-plane and perpendicular-toplane magnetotransport at low temperatures. Perpendicular-to-plane transport reveals the typical tunneling magnetotransport (TMR) signal. Interestingly, a similar TMR signature is observed in the in-plane transport signal. Here, low-ohmic shunting of the MTJ by the top contact results in significant perpendicular-to-plane current paths. This effect allows the determination of TMR ratios of MTJs based on a simplified in-plane measurement. However, the same effect can lead to an inaccurate deter…
Effects of Longitudinal Spin Current Density Gradient on Spin-Orbit Torque Switching of Perpendicular Magnetization
State Key Laboratory of Semiconductor Physics and Chip Technologies, Institute of Semiconductors, Chinese Academy of Sciences（中国科学院半导体研究所半导体物理与芯片技术国家重点实验室）；Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences（中国科学院大学材料科学与光电技术研究中心）
We report field- and current-induced domain wall (DW) depinning experiments in Ta/Co20Fe60B20/MgO nanowires through a Hall cross geometry. While purely field-induced depinning shows no angular dependence on in-plane fields, the effect of the current depends crucially on the internal DW structure, which we manipulate by an external magnetic in-plane field. We show for the first time depinning measurements for a current sent parallel to the DW and compare its depinning efficiency with the conventional case of current flowing perpendicularly to the DW. We find that the maximum efficiency is simil…
We use pulsed inductive microwave magnetometry to study the precessional magnetization dynamics of the free layer in CoFeB/MgO/CoFeB based magnetic tunnelling junction stacks with varying MgO barrier thickness. From the field dependence of the precession frequency we are able to derive the uniaxial anisotropy energy and the exchange coupling between the free and the pinned layer. Furthermore the field dependence of the effective damping parameter is derived. Below a certain threshold barrier thickness we observe an increased effective damping for antiparallel orientation of free and pinned lay…
The critical current needed to destabilize the magnetization of a perpendicular ferromagnet via the spin Hall effect is studied. Both the dampinglike and fieldlike torques associated with the spin current generated by the spin Hall effect is included in the Landau-Lifshitz-Gilbert equation to model the system. In the absence of the fieldlike torque, the critical current is independent of the damping constant and is much larger than that of conventional spin torque switching of collinear magnetic systems, as in magnetic tunnel junctions. With the fieldlike torque included, we find that the crit…
We study the current-induced torques in asymmetric magnetic tunnel junctions containing a conventional ferromagnet and a magnetic Weyl semimetal contact. The Weyl semimetal hosts chiral bulk states and topologically protected Fermi arc surface states which were found to govern the voltage behavior and efficiency of current-induced torques. We report how bulk chirality dictates the sign of the non-equilibrium torques acting on the ferromagnet and discuss the existence of large field-like torques acting on the magnetic Weyl semimetal which exceeds the theoretical maximum of conventional magnetic…
Spin valves incorporating perpendicularly magnetized materials are promising structures for memory elements and high-frequency generators. We report the angular dependence of the spin-transfer torque in spin valves with perpendicular equilibrium magnetization computed by first-principles circuit theory and compare results with experiments by W.H. Rippard c.s. [Phys. Rev. B 81, 014426 (2010)] on the CoFe|Cu|CoNi system. Furthermore, we predict a non-monotonous ("wavy") spin-transfer torque when the Cu spacer is replaced by a Ru layer.
The influence of structural asymmetries (barrier height and exchange splitting), as well as inelastic scattering (magnons and phonons) on the bias dependence of the spin transfer torque in a magnetic tunnel junction is studied theoretically using the free electron model. We show that they modify the "conventional" bias dependence of the spin transfer torque, together with the bias dependence of the conductance. In particular, both structural asymmetries and bulk (inelastic) scattering add {\em antisymmetric} terms to the perpendicular torque ($\propto V$ and $\propto j_e|V|$), while the interf…
To address thermal stability issues for spintronic devices with a reduced size, we investigate spin-orbit torque in Co/Pt multilayers with strong perpendicular magnetic anisotropy. Note that the spin-orbit torque arises from the global imbalance of the spin currents from the top and bottom interfaces for each Co layer. By inserting Ta or Cu layers to strengthen the top-down asymmetry, the spin-orbit torque efficiency can be greatly modified without compromised perpendicular magnetic anisotropy. Above all, the efficiency builds up as the number of layers increases, realizing robust thermal stab…
We have investigated the current-induced spin transfer torque of a ferromagnet-insulator-ferromagnet tunnel junction by taking the spin-flip scatterings into account. It is found that the spin-flip scattering can induce an additional spin torque, enhancing the maximum of the spin torque and giving rise to an angular shift compared to the case when the spin-flip scatterings are neglected. The effects of the molecular fields of the left and right ferromagnets on the spin torque are also studied. It is found that $τ^{Rx}/I_{e}$ ($τ^{Rx}$ is the spin-transfer torque acting on the right ferromagnet…
Spin transport in magnetic tunnel junctions comprising a single magnetic layer in the presence of interfacial spin-orbit interaction (SOI) is investigated theoretically. Due to the presence of interfacial SOI, a current-driven spin torque can be generated at the second order in SOI, even in the absence of an external spin polarizer. This torque possesses two components, in-plane and perpendicular to the plane of rotation, that can induce either current-driven {\em magnetization switching} from in-plane to out-of-plane configuration or {\em magnetization precessions}, similarly to Spin Transfer…
We study current-induced switching in magnetic tunnel junctions (MTJs) in the presence of a field-like spin-transfer torque and titled pinned-layer magnetization in the high current limit at finite temperature. We consider both the Slonczewski and field-like torques with coefficients $a_J$ and $b_J $, respectively. At finite temperatures, $σ= b_J/a_J = \pm1$ leads to a smaller mean switching time compared that with $σ= 0$. The reduction of switching time in the presence of the field-like term is due to the alignment effect (for $σ> 0$) and the initial torque effect.
A three-dimensional self-consistent spin transport model is developed, which includes both tunnelling transport, as well as metallic transport. Using the spin accumulation computed either side of a tunnel barrier, spin torques are obtained, and it is shown the model reproduces both damping-like and field-like spin-transfer torques, with the expected sinusoidal angular dependence, and inverse ferromagnetic layer thickness dependence. An explicit solution to the drift-diffusion model is derived, which allows analysing the effect of both the reference and free layer thickness on the spin-transfer…
Understanding the magnetization dynamics induced by spin transfer torques in perpendicularly magnetized magnetic tunnel junction nanopillars and its dependence on material parameters is critical to optimizing device performance. Here we present a micromagnetic study of spin-torque switching in a disk-shaped element as a function of the free layer's exchange constant and disk diameter. The switching is shown to generally occur by 1) growth of the magnetization precession amplitude in the element center; 2) an instability in which the reversing region moves to the disk edge, forming a magnetic d…
Subjecting a magnetic tunnel junction (MTJ) to a spin current and/or electric voltage induces magnetic precession, which can reciprocally pump current through the circuit. This results in an ac impedance, which is sensitive to the magnetic field applied to the MTJ. Measuring this impedance can be used to characterize the coupling between the magnetic free layer and the electric current as well as a read-out of the magnetic configuration of the MTJ.
Magnetic droplets are non-topological dynamical solitons that can be nucleated and sustained in nano-contact based spin torque nano-oscillators (NC-STNOs) with perpendicular anisotropy free layers. While originally predicted in all-perpendicular NC-STNOs, all experimental demonstrations have so far relied on orthogonal devices with an in-plane polarizing layer that requires a strong magnetic field for droplet nucleation. Here, we instead show the nucleation and sustained operation of magnetic droplets in all-perpendicular NC-STNOs in modest perpendicular fields and over a wide range of nano-co…
We report the fabrication of perpendicular ferromagnetic electrodes for tunneling devices consist of van der Waals heterostructure. We found MgO/Co/Pt films on Hexagonal BN shows perpendicular magnetic anisotropy (PMA) with the easy axis perpendicular to the substrate. Vacuum annealing enhances the perpendicular anisotropy. The easy axis along the perpendicular direction persists up to room temperature with the Pt layer thickness ranges from 1.5 to 5 nm. We employed the PMA electrodes to construct tunneling devices on graphene and monolayer WSe2, where spin injection characteristics and field …
We report single-shot measurements of resistance versus time for thermally assisted spin-torque-driven switching in magnetic tunnel junctions. We achieve sufficient sensitivity to resolve the resistance signals leading up to switching, including the variations between individual switching events. Analyses of pre-switching thermal fluctuations allow detailed measurements of coherence times and variations in magnetization precession amplitude. We find that with a small in-plane hard-axis magnetic field the magnetization dynamics are more spatially coherent than for the case of zero field.
Current-induced spin-orbit torques (SOTs) are of interest for fast and energy-efficient manipulation of magnetic order in spintronic devices. To be deterministic, however, switching of perpendicularly magnetized materials by SOT requires a mechanism for in-plane symmetry breaking. Existing methods to do so involve the application of an in-plane bias magnetic field, or incorporation of in-plane structural asymmetry in the device, both of which can be difficult to implement in practical applications. Here, we reported bias-field-free SOT switching in a single perpendicular CoTb layer with an eng…
The phenomenon of spin transfer torque (STT) has attracted a great deal of interests due to its promising prospects in practical spintronic devices. In this paper, we report a theoretical investigation of STT in a noncollinear magnetic tunnel junction under ac modulation based on the nonequilibrium Green's function formalism, and derive a closed-formulation for predicting the time-averaged STT. Using this formulation, the ac STT of a carbon-nanotube-based magnetic tunnel junction is analyzed. Under ac modulation, the low-bias linear (quadratic) dependence of the in-plane (out-of-plane) torque …
Magnetization switching by current-induced spin-orbit torques (SOTs) is of great interest due to its potential applications for ultralow-power memory and logic devices. In order to be of technological interest, SOT effects need to switch ferromagnets with a perpendicular (out-of-plane) magnetization. Currently, however, this typically requires the presence of an in-plane external magnetic field, which is a major obstacle for practical applications. Here we report for the first time on SOT-induced switching of out-of-plane magnetized Ta/Co20Fe60B20/TaOx structures without the need for any exter…
The spin-orbit torque (SOT) arising from materials with large spin-orbit coupling promises a path for ultra-low power and fast magnetic-based storage and computational devices. We investigated the SOT from magnetron-sputtered BixSe(1-x) thin films in BixSe(1-x)/CoFeB heterostructures by using a dc planar Hall method. Remarkably, the spin Hall angle (SHA) was found to be as large as 18.83, which is the largest ever reported at room temperature (RT). Moreover, switching of a perpendicular CoFeB multilayer using SOT from the BixSe(1-x) has been observed with the lowest-ever switching current dens…
The responses of the electrical current and the current-induced spin transfer torque (CISTT) to an ac bias in addition to a dc bias in a magnetic tunnel junction are investigated by means of the time-dependent nonquilibrium Green function technique. The time-averaged current (time-averaged CISTT) is formulated in the form of a summation of dc current (dc CISTT) multiplied by products of Bessel functions with the energy levels shifted by $m\hbar ω_{0}$. The tunneling current can be viewed as to happen between the photonic sidebands of the two ferromagnets. The electrons can pass through the bar…
This chapter presents a review on spin transfer torque in magnetic tunnel junctions. In the first part, we propose an overview of experimental and theoretical studies addressing current-induced magnetization excitations in magnetic tunnel junctions. The most significant results are presented and the main observable characteristics are discussed. A description of the mechanism of spin transfer in ferromagnets is finally proposed. In the second part, a quantum description of spin transport in magnetic tunnel junctions with amorphous barrier is developed. The role of spin-dependent reflections as…
The relative contributions of in-plane (damping-like) and out-of-plane (field-like) spin-transfer-torques in the magnetization switching of out-of-plane magnetized magnetic tunnel junctions (pMTJ) has been theoretically analyzed using the transformed Landau-Lifshitz (LL) equation with the STT terms. It is demonstrated that in a pMTJ structure obeying macrospin dynamics, the out-of-plane torque influences the precession frequency but it does not contribute significantly to the STT switching process (in particular to the switching time and switching current density), which is mostly determined b…
We report on an experimental study of current induced switching in perpendicular magnetic random access memory (MRAM) cells with variable resistance-area products (RAs). Our results show that in addition to spin transfer torque (STT), current induced self-heating and voltage controlled magnetic anisotropy also contribute to switching and can explain the RA dependencies of switching current density and STT efficiency. Our findings suggest that thermal optimization of perpendicular MRAM cells can result in significant reduction of switching currents.
We calculate the current and the spin-torque in small symmetric double tunnel barrier ferromagnet - superconductor - ferromagnet (F-S-F) systems. Spin-accumulation on the superconductor governs the transport properties when the spin-flip relaxation time is longer than the transport dwell time. In the elastic transport regime, it is demonstrated that the relative change in the current (spin-torque) for F-S-F systems equals the relative change in the current (spin-torque) for F-N-F systems upon changing the relative magnetization direction of the two ferromagnets. This differs from the results i…
In ferromagnetic trilayers, a spin-orbit-induced spin current can have a spin polarization of which direction is deviated from that for the spin Hall effect. Recently, magnetization switching in ferromagnetic trilayers has been proposed and confirmed by the experiments. In this work, we theoretically and numerically investigate the switching current required for perpendicular magnetization switching in ferromagnetic trilayers. We confirm that the tilted spin polarization enables field-free deterministic switching at a lower current than conventional spin-orbit torque or spin-transfer torque sw…
At total filling factor $ν=1$ quantum Hall bilayers can have an ordered ground state with spontaneous interlayer phase coherence. The ordered state is signaled experimentally by dramatically enhanced interlayer tunnel conductances at low bias voltages; at larger bias voltages inter-layer currents are similar to those of the disordered state. We associate this change in behavior with the existence of a critical current beyond which static inter-layer phase differences cannot be maintained, and examine the dependence of this critical current on sample geometry, phase stiffness, and the coherent …
We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof…
Spin-polarized charge-currents induce magnetic tunnel junction (MTJ) switching by virtue of spin-transfer-torque (STT). Recently, by taking advantage of the spin dependent thermoelectric properties of magnetic materials, novel means of generating spin-currents from temperature gradients, and their associated thermal spin torques (TSTs) have been proposed, but so far these TSTs have not been large enough to influence MTJ switching. Here we demonstrate significant TSTs in MTJs by generating large temperature gradients across ultrathin MgO tunnel barriers that considerably affect the switching fi…
Current induced spin wave excitations in spin transfer torque nano-contacts are known as a promising way to generate exchange-dominated spin waves at the nano-scale. It has been shown that when these systems are magnetized in the film plane, broken spatial symmetry of the field around the nano-contact induced by the Oersted field opens the possibility for spin wave mode co-existence including a non-linear self-localized spin-wave bullet and a propagating mode. By means of micromagnetic simulations, here we show that in systems with strong perpendicular magnetic anisotropy (PMA) in the free lay…
We examine the spin torque (ST) response of magnetic tunnel junctions (MTJs) with ultra-thin MgO tunnel barrier layers to investigate the relationship between the spin-transfer torque and the tunnel magnetoresistance (TMR) under finite bias. We find that the spin torque per unit current exerted on the free layer decreases by less than 10% over a bias range where the TMR decreases by over 40%. We examine the implications of this result for various spin-polarized tunneling models and find that it is consistent with magnetic-state-dependent effective tunnel decay lengths.
There exists a significant challenge in developing efficient magnetic tunnel junctions with low write currents for non-volatile memory devices. With the aim of analysing potential materials for efficient current-operated magnetic junctions we have developed a multi-scale methodology combining the ab initio calculations of spin-transfer torque with large-scale time-dependent simulations using atomistic spin dynamics. In this work we introduce our multi-scale approach including a discussion on a number of possible mapping schemes the ab initio spin torques into the spin dynamics. We demonstrate …
Future applications of spin-orbit torque will require new mechanisms to improve the efficiency for switching nanoscale magnetic tunnel junctions (MTJs), while also controlling the magnetic dynamics to achieve fast, nanosecond scale performance with low write error rates. Here we demonstrate a strategy to simultaneously enhance the interfacial magnetic anisotropy energy and suppress interfacial spin memory loss by introducing sub-atomic and monatomic layers of Hf at the top and bottom interfaces of the ferromagnetic free layer of an in-plane magnetized three-terminal MTJ device. When combined w…
We model "soft" error rates for writing (WSER) and for reading (RSER) for perpendicular spin-torque memory devices by solving the Fokker-Planck equation for the probability distribution of the angle that the free layer magnetization makes with the normal to the plane of the film. We obtain: (1) an exact, closed form, analytical expression for the zero-temperature switching time as a function of initial angle; (2) an approximate analytical expression for the exponential decay of the WSER as a function of the time the current is applied; (3) comparison of the approximate analytical expression fo…
The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering $\text{Fe}_\text{x}\text{Co}_{\text{1-x}}$ alloys. Further, we compare the TSTT to the bias voltage driven STT and discuss the requirements for a possible thermal switching. For example, only for very thin barriers of 3 monolayers MgO a thermal switching is imaginable. However, even for such a thin barrier the TSTT is…
Voltage-driven spin transfer torque in a magnetic tunnel junction comprising magnetic insulating electrodes is studied theoretically. In contrast with the conventional magnetic tunnel junctions comprising transition metal ferromagnets, the spin transfer torque presents unconventional bias dependencies, related to the presence of spin-dependent Fowler-Nordheim tunneling processes. In particular, we find that (i) the out-of-plane torque generally dominates the in-plane torque, (ii) out-of-plane torque and in-plane torque are symmetric and asymmetric at low bias voltage, respectively, and (iii) b…
