Statistical properties of fidelity in quantum tomography protocols in Hilbert spaces of different dimensions
Yu. I. Bogdanov, I. D. Bukeev, A. K. Gavrichenko
备注：
Material of this article was mainly represented May 29, 2010 at the XIII International Conference on Quantum Optics and Quantum Information in Kiev (Ukraine)
A throughout study of statistical characteristics of fidelity in different protocols of quantum tomography is given. We consider protocols based on geometry of platonic solids and other polyhedrons with high degree of symmetry such as fullerene and its dual polyhedron. Characteristics of fidelity in different protocols are compared to the theoretical level of the minimum possible level of fidelity loss. Tomography of pure and mixed states in Hilbert spaces of different dimension is analyzed. Results of this work could be used for a better control of quantum gates and quantum states in quantum information technologies.
We demonstrate high-fidelity Zeeman qubit state detection in a single trapped 88 Sr+ ion. Qubit readout is performed by shelving one of the qubit states to a metastable level using a narrow linewidth diode laser at 674 nm followed by state-selective fluorescence detection. The average fidelity reached for the readout of the qubit state is 0.9989(1). We then measure the fidelity of state tomography, averaged over all possible single-qubit states, which is 0.9979(2). We also fully characterize the detection process using quantum process tomography. This readout fidelity is compatible with recent…
We show that $Ω(rd/ε)$ copies of an unknown rank-$r$, dimension-$d$ quantum mixed state are necessary in order to learn a classical description with $1 - ε$ fidelity. This improves upon the tomography lower bounds obtained by Haah, et al. and Wright (when closeness is measured with respect to the fidelity function).
The mechanism of describing quantum states by standard probability (tomographic one) instead of wave function or density matrix is elucidated. Quantum tomography is formulated in an abstract Hilbert space framework, by means of the identity decompositions in the Hilbert space of hermitian linear operators, with trace formula as scalar product of operators. Decompositions of identity are considered with respect to over-complete families of projectors labeled by extra parameters and containing a measure, depending on these parameters. It plays the role of a Gram-Schmidt orthonormalization kernel…
In this report we present a general approach for estimating quantum circuits by means of measurements. We apply the developed general approach for estimating the quality of superconducting and optical quantum chips. Using the methods of quantum states and processes tomography developed in our previous works, we have defined the adequate models of the states and processes under consideration.
We propose a quantum tomography scheme for pure qudit systems which adopts random base measurements and generative learning methods, along with a built-in fidelity estimation approach to assess the reliability of the tomographic states. We prove the validity of the scheme theoretically, and we perform numerically simulated experiments on several target states including three typical quantum information states and randomly initiated states, demonstrating its efficiency and robustness. The number of replicas required by a certain convergence criterion grows in the manner of low-degree polynomial…
In the current work we address the problem of quantum process tomography (QPT) in the case of imperfect preparation and measurement of the states which are used for QPT. The fuzzy measurements approach which helps us to efficiently take these imperfections into account is considered. However, to implement such a procedure one should have a detailed information about the errors. An approach for obtaining the partial information about them is proposed. It is based on the tomography of the ideal identity gate. This gate could be implemented by performing the measurement right after the initial st…
We have performed experimental quantum state tomography of NOON states with up to four photons. The measured states are generated by mixing a classical coherent state with spontaneous parametric down-conversion. We show that this method produces states which exhibit a high fidelity with ideal NOON states. The fidelity is limited by the overlap of the two-photon down-conversion state with any two photons originating from the coherent state, for which we introduce and measure a figure of merit. A second limitation on the fidelity set by the total setup transmission is discussed. We also apply th…
Quantum state tomography is an important tool for quantum communication, computation, metrology, and simulation. Efficient quantum state tomography on a high dimensional quantum system is still a challenging problem. Here, we propose a novel quantum state tomography method, auxiliary Hilbert space tomography, to avoid pre-rotations before measurement in a quantum state tomography experiment. Our method requires projective measurements in a higher dimensional space that contains the subspace that includes the prepared states. We experimentally demonstrate this method with orbital angular moment…
We train convolutional neural networks to predict whether or not a set of measurements is informationally complete to uniquely reconstruct any given quantum state with no prior information. In addition, we perform fidelity benchmarking based on this measurement set without explicitly carrying out state tomography. The networks are trained to recognize the fidelity and a reliable measure for informational completeness. By gradually accumulating measurements and data, these trained convolutional networks can efficiently establish a compressive quantum-state characterization scheme by acceleratin…
Quantum tomography is an important tool for obtaining information about the quantum state from experimental data. In this study, we conduct a comparative analysis of various quantum tomography protocols, including protocols based on highly symmetric sets of state vectors, on mutually unbiased bases (MUB), and two-level transformations. Using the universal distribution for the fidelity of quantum state tomography, we estimate the fidelity and efficiency of quantum measurements for qudits of various dimensions as applied to a set of random states uniformly distributed over the Haar measure.
We describe an approach for characterizing the process of quantum gates using quantum process tomography, by first modeling them in an extended Hilbert space, which includes non-qubit degrees of freedom. To prevent unphysical processes from being predicted, present quantum process tomography procedures incorporate mathematical constraints, which make no assumptions as to the actual physical nature of the system being described. By contrast, the procedure presented here ensures physicality by placing physical constraints on the nature of quantum processes. This allows quantum process tomography…
A generic model of measurement device which is able to directly measure commonly used quantum-state characteristics such as fidelity, overlap, purity and Hilbert-Schmidt distance for two general uncorrelated mixed states is proposed. In addition, for two correlated mixed states, the measurement realizes an entanglement witness for Werner's separability criterion. To determine these observables, the estimation only one parameter - the visibility of interference, is needed. The implementations in cavity QED, trapped ion and electromagnetically induced transparency experiments are discussed.
The scheme of photon-number tomography is discussed in the framework of star-product quantization. The connection of dual quantization scheme and observables is reviewed. The quantizer and dequantizer operators and kernels of star product of tomograms in photon-number tomography scheme and its dual one are presented in explicit form. The fidelity and state purity are discussed in photon{number tomographic scheme, and the expressions for fidelity and purity are obtained in the form of integral of the product of two photon-number tomograms with integral kernel which is presented in explicit form…
We address the experimental determination of entropic quantum discord for systems made of a pair of polarization qubits. We compare results from full and partial tomography and found that the two determinations are statistically compatible, with partial tomography leading to a smaller value of discord for depolarized states. Despite the fact that our states are well described, in terms of fidelity, by families of depolarized or phase-damped states, their entropic discord may be largely different from that predicted for these classes of states, such that no reliable estimation procedure beyond …
The techniques of low-rank matrix recovery were adapted for Quantum State Tomography (QST) previously by D. Gross et al. [Phys. Rev. Lett. 105, 150401 (2010)], where they consider the tomography of $n$ spin-$1/2$ systems. For the density matrix of dimension $d = 2^n$ and rank $r$ with $r \ll 2^n$, it was shown that randomly chosen Pauli measurements of the order $O(dr \log(d)^2)$ are enough to fully reconstruct the density matrix by running a specific convex optimization algorithm. The result utilized the low operator-norm of the Pauli operator basis, which makes it `incoherent' to low-rank ma…
Quantum state tomography aims to determine the quantum state of a system from measured data and is an essential tool for quantum information science. When dealing with continuous variable quantum states of light, tomography is often done by measuring the field amplitudes at different optical phases using homodyne detection. The quadrature-phase homodyne measurement outputs a continuous variable, so to reduce the computational cost of tomography, researchers often discretize the measurements. We show that this can be done without significantly degrading the fidelity between the estimated state …
We propose an efficient protocol to fully reconstruct a set of high-fidelity quantum gates. Usually, the efficiency of reconstructing high-fidelity quantum gates is limited by the sampling noise. Our protocol is based on a perturbative approach and has two stages. In the first stage, the initial part of noisy quantum gates is reconstructed by measuring traces of maps, and the trace can be measured by amplifying the noise in a way similar to randomised benchmarking and quantum spectral tomography. In the second stage, by amplifying the non-unital part using the unital part, we can efficiently r…
Quantum logic gates must perform properly when operating on their standard input basis states, as well as when operating on complex superpositions of these states. Experiments using superconducting qubits have validated the truth table for particular implementations of e.g. the controlled-NOT gate [1,2], but have not fully characterized gate operation for arbitrary superpositions of input states. Here we demonstrate the use of quantum process tomography (QPT) [3,4] to fully characterize the performance of a universal entangling gate between two superconducting quantum bits. Process tomography …
The tomographic description of a quantum state is formulated in an abstract infinite dimensional Hilbert space framework, the space of the Hilbert-Schmidt linear operators, with trace formula as scalar product. Resolutions of the unity, written in terms of over-complete sets of rank-one projectors and of associated Gram-Schmidt operators taking into account their non-orthogonality, are then used to reconstruct a quantum state from its tomograms. Examples of well known tomographic descriptions illustrate the exposed theory.
We apply the method of compressed sensing (CS) quantum process tomography (QPT) to characterize quantum gates based on superconducting Xmon and phase qubits. Using experimental data for a two-qubit controlled-Z gate, we obtain an estimate for the process matrix $χ$ with reasonably high fidelity compared to full QPT, but using a significantly reduced set of initial states and measurement configurations. We show that the CS method still works when the amount of used data is so small that the standard QPT would have an underdetermined system of equations. We also apply the CS method to the analys…
We present a detailed error analysis of a Rydberg blockade mediated controlled-NOT quantum gate between two neutral atoms as demonstrated recently in Phys. Rev. Lett. 104, 010503 (2010) and Phys. Rev. A 82, 030306 (2010). Numerical solutions of a master equation for the gate dynamics, including all known sources of technical error, are shown to be in good agreement with experiments. The primary sources of gate error are identified and suggestions given for future improvements. We also present numerical simulations of quantum process tomography to find the intrinsic fidelity, neglecting technic…
We provide optimized recursion relations for homodyne tomography. We improve previous methods by mitigating the divergences intrinsic in the calculation of the pattern functions used previously, and detail how to implement the data analysis through Monte Carlo simulations. Our refinements are necessary for the reconstruction of excited quantum states which populate a high-dimensional subspace of the electromagnetic field Hilbert space. We also present a Julia package for the analysis and the reconstruction method.
We report on an intrinsic relationship between the maximum-likelihood quantum-state estimation and the representation of the signal. A quantum analogy of the transfer function determines the space where the reconstruction should be done without the need for any ad hoc truncations of the Hilbert space. An illustration of this method is provided by a simple yet practically important tomography of an optical signal registered by realistic binary detectors.
The performance of a quantum teleportation algorithm implemented on an ion trap quantum computer is investigated. First the algorithm is analyzed in terms of the teleportation fidelity of six input states evenly distributed over the Bloch sphere. Furthermore, a quantum process tomography of the teleportation algorithm is carried out which provides almost complete knowledge about the algorithm.
We experimentally address the significance of fidelity as a figure of merit in quantum state reconstruction of discrete (DV) and continuous variable (CV) quantum optical systems. In particular, we analyze the use of fidelity in quantum homodyne tomography of CV states and maximum-likelihood polarization tomography of DV ones, focussing attention on nonclassicality, entanglement and quantum discord as a function of fidelity to a target state. Our findings show that high values of fidelity, despite well quantifying geometrical proximity in the Hilbert space, may be obtained for states displaying…
Current techniques in quantum process tomography typically return a single point estimate of an unknown process based on a finite albeit large amount of measurement data. Due to statistical fluctuations, however, other processes close to the point estimate can also produce the observed data with near certainty. Unless appropriate error bars can be constructed, the point estimate does not carry any sound operational interpretation. Here, we provide a solution to this problem by constructing a confidence region estimator for quantum processes. Our method enables reliable estimation of essentiall…
Encoding quantum information in the photon temporal mode (TM) offers a robust platform for high-dimensional quantum protocols. The main practical challenge, however, is to design a device that operates on single photons in specific TMs and all coherent superpositions. The quantum pulse gate (QPG) is a mode-selective sum-frequency generation designed for this task. Here, we perform a full modal characterisation of a QPG using weak coherent states in well-defined TMs. We reconstruct a full set of measurement operators, which show an average fidelity of 0.85 to a theoretically ideal device when o…
We characterized unital quantum channels of single photon polarization qubits. The channels are composed of two birefringent crystals and wave-plates, where their decoherence properties are controlled. An experimental comparison between two different depolarizing configurations was performed using a quantum process tomography procedure. The results are with a high fidelity to the theoretical predictions.
A novel operational method for estimating the efficiency of quantum state tomography protocols is suggested. It is based on a-priori estimation of the quality of an arbitrary protocol by means of universal asymptotic fidelity distribution and condition number, which takes minimal value for better protocol. We prove the adequacy of the method both with numerical modeling and through the experimental realization of several practically important protocols of quantum state tomography.
Quantum tomography is the main method used to assess the quality of quantum information processing devices, but its complexity presents a major obstacle for the characterization of even moderately large systems. The number of experimental settings required to extract complete information about a device grows exponentially with its size, and so does the running time for processing the data generated by these experiments. Part of the problem is that tomography generates much more information than is usually sought. Taking a more targeted approach, we develop schemes that enable (i) estimating th…
A single photon, delocalized over two optical modes, is characterized by means of quantum homodyne tomography. The reconstructed four-dimensional density matrix extends over the entire Hilbert space and thus reveals, for the first time, complete information about the dual-rail optical quantum bit as a state of the electromagnetic field. The experimental data violate the Bell inequality albeit with a loophole similar to the detection loophole in photon counting experiments.
We have numerically simulated quantum tomography of single-qubit and two-qubit quantum gates with qubits represented by mesoscopic ensembles containing random numbers of atoms. Such ensembles of strongly interacting atoms in the regime of Rydberg blockade are known as Rydberg superatoms. The Stimulated Raman Adiabatic Passage (STIRAP) in the regime of Rydberg blockade is used for deterministic Rydberg excitation in the ensemble, required for storage of quantum information in the collective state of the atomic ensemble and implementation of two-qubit gates. The optimized shapes of the STIRAP pu…
Quantum tomography is a widely applicable tool for complete characterization of quantum states and processes. In the present work, we develop a method for precision-guaranteed quantum process tomography. With the use of the Choi-Jamiolkowski isomorphism, we generalize the recently suggested extended norm minimization estimator for the case of quantum processes. Our estimator is based on the Hilbert-Schmidt distance for quantum processes. Specifically, we discuss the application of our method for characterizing quantum gates of a superconducting quantum processor in the framework of the IBM Q E…
Integrated quantum photonic circuits are becoming increasingly complex. Accurate calibration of device parameters and detailed characterization of the prepared quantum states are critically important for future progress. Here we report on an effective experimental calibration method based on Bayesian updating and Markov chain Monte Carlo integration. We use this calibration technique to characterize a two qubit chip and extract the reflectivities of its directional couplers. An average quantum state tomography fidelity of 93.79+/-1.05% against the four Bell states is achieved. Furthermore, com…
Common tools for obtaining physical density matrices in experimental quantum state tomography are shown here to cause systematic errors. For example, using maximum likelihood or least squares optimization for state reconstruction, we observe a systematic underestimation of the fidelity and an overestimation of entanglement. A solution for this problem can be achieved by a linear evaluation of the data yielding reliable and computational simple bounds including error bars.
We describe an algorithm for quantum state tomography that converges in polynomial time to an estimate, together with a rigorous error bound on the fidelity between the estimate and the true state. The result suggests that state tomography on large quantum systems may be much more feasible than the exponential size of state space suggests. In many situations, the correctness of the state estimate can be certified from the data alone, with no a priori assumptions on the form of the measured state.
Does chaos in the dynamics enable information gain in quantum tomography or impede it? We address this question by considering continuous measurement tomography in which the measurement record is obtained as a sequence of expectation values of a Hermitian observable evolving under the repeated application of the Floquet map of the quantum kicked top. For a given dynamics and Hermitian observables, we observe completely opposite behavior in the tomography of well-localized spin coherent states compared to random states. As the chaos in the dynamics increases, the reconstruction fidelity of spin…
The deployment of intermediate- and large-scale quantum devices necessitates the development of efficient full state tomographical techniques for quantum benchmarks. Here, we introduce a matrix filling-based method for tomography of pure quantum states, called the matrix-completion quantum state tomography. This method requires only 2n + 1 local Pauli operators and minimal post-processing for n-qubit states. Numerical results show that our method is highly efficient on superconducting real quantum devices and achieves better fidelity estimates of multiqubit quantum states as compared to contem…
Estimation of quantum states and measurements is crucial for the implementation of quantum information protocols. The standard method for each is quantum tomography. However, quantum tomography suffers from systematic errors caused by imperfect knowledge of the system. We present a procedure to simultaneously characterize quantum states and measurements that mitigates systematic errors by use of a single high-fidelity state preparation and a limited set of high-fidelity unitary operations. Such states and operations are typical of many state-of-the-art systems. For this situation we design a s…
We use the semiclassical method proposed in \cite{Adelcio2003} to study scalar products such as the overlap, Husimi functions and fidelity decay. Scars of classical periodic orbits arise naturally in this pertubative expansion. We also derive analytically a well known numerical result that fidelity has a quadratic decay for short times. We study the overlap in the chaotic regime and integrable for some simple systems.
We consider realistic measurement systems, where measurements are accompanied by decoherence processes. The aim of this work is the construction of methods and algorithms for precise quantum measurements with fidelity close to the fundamental limit. In the present work the notions of ideal and non-ideal quantum measurements are strictly formalized. It is shown that non-ideal quantum measurements could be represented as a mixture of ideal measurements. Based on root approach the quantum state reconstruction method is developed. Informational accuracy theory of non-ideal quantum measurements is …
The measures of distances between points in a Hilbert space are one of the basic theoretical concepts used to characterize properties of a quantum system with respect to some etalon state. These are not only used in studying fidelity of signal transmission and basic quantum phenomena but also applied in measuring quantum correlations, and also in quantum machine learning. The values of quantum distance measures are very difficult to determine without completely reconstructing the state. Here we demonstrate an interferometric approach to measuring distances between quantum states that in some c…
We introduce random matrix theory to study the tomographic efficiency of a wide class of measurements constructed out of weighted 2-designs, including symmetric informationally complete (SIC) probability operator measurements (POMs). In particular, we derive analytic formulae for the mean Hilbert-Schmidt distance and the mean trace distance between the estimator and the true state, which clearly show the difference between the scaling behaviors of the two error measures with the dimension of the Hilbert space. We then prove that the product SIC POMs---the multipartite analogue of the SIC POMs-…
Quantum gates in experiment are inherently prone to errors that need to be characterized before they can be corrected. Full characterization via quantum process tomography is impractical and often unnecessary. For most practical purposes, it is enough to estimate more general quantities such as the average fidelity. Here we use a unitary 2-design and twirling protocol for efficiently estimating the average fidelity of Clifford gates, to certify a 7-qubit entangling gate in a nuclear magnetic resonance quantum processor. Compared with more than $10^8$ experiments required by full process tomogr…
Review of the probability representation of quantum mechanics and the symplectic tomography approach are presented. The examples of Gaussian states of nanoelectric circuit, Josephson junction, and two interacting high-quality resonant circuits are considered. The Shannon entropy, quantum information, fidelity, and purity of quantum states in the tomographic representation of quantum mechanics are studied.
Quantum process tomography is a procedure by which the unknown dynamical evolution of an open quantum system can be fully experimentally characterized. We demonstrate explicitly how this procedure can be implemented with a nuclear magnetic resonance quantum computer. This allows us to measure the fidelity of a controlled-not logic gate and to experimentally investigate the error model for our computer. Based on the latter analysis, we test an important assumption underlying nearly all models of quantum error correction, the independence of errors on different qubits.
Universal compilation is a training process that compiles a trainable unitary into a target unitary and it serves vast potential applications from quantum dynamic simulations to optimal circuits with deep-compressing, device benchmarking, quantum error mitigation, and so on. Here, we propose a universal compilation-based variational algorithm for the preparation and tomography of quantum states in low-depth quantum circuits. We apply the Fubini-Study distance to be a trainable cost function under various gradient-based optimizers, including the quantum natural gradient approach. We evaluate th…
In quantum-state tomography on sources with quantum degrees of freedom of large Hilbert spaces, inference of quantum states of light for instance, a complete characterization of the quantum states for these sources is often not feasible owing to limited resources. As such, the concepts of informationally incomplete state estimation becomes important. These concepts are ideal for applications to quantum channel/process tomography, which typically requires a much larger number of measurement settings for a full characterization of a quantum channel. Some key aspects of both quantum-state and qua…
Quantum process tomography is an experimental technique to fully characterize an unknown quantum process. Standard quantum process tomography suffers from exponentially scaling of the number of measurements with the increasing system size. In this work, we put forward a quantum machine learning algorithm which approximately encodes the unknown unitary quantum process into a relatively shallow depth parametric quantum circuit. We demonstrate our method by reconstructing the unitary quantum processes resulting from the quantum Hamiltonian evolution and random quantum circuits up to $8$ qubits. R…
