We report an experimental investigation of the edge effect on the room-temperature transport in graphene nanoribbon and graphene sheet (both single-layer and bilayer). By measuring the resistance scaling behaviors at both low and high carrier densities, we show that the transport of single-layer nanoribbons lies in a strong localization regime, which can be attributed to an edge effect. We find that this edge effect can be weakened by enlarging the width, decreasing the carrier densities or adding an extra layer. From graphene nanoribbon to graphene sheet, the data show a dimensional crossover of the transport regimes possibly due to the drastic change of the edge effect.
Despite many studies on how geometry can be used to control the electronic properties of graphene, certain limitations to fabrication of designed graphene nanostructures exist. Here, we demonstrate controlled topographical replication of graphene by artificial deoxyribonucleic acid (DNA) nanostructures. Owing to the high degree of geometrical freedom of DNA nanostructures, we controlled the nanoscale topography of graphene. The topography of graphene replicated from DNA nanostructures showed enhanced thermal stability and revealed an interesting negative temperature coefficient of sheet resist…
We study charged impurity scattering and static screening in a top-gated substrate-supported graphene nanostructure. Our model describes how boundary conditions can be incorporated into scattering, sheds light on the dielectric response of these nanostructures, provides insights into the effect of the top gate on impurity scattering, and predicts that the carrier mobility in such graphene heterostructures decreases with increasing top dielectric thickness and higher carrier density. An increase of up to almost 60 percent in carrier mobility in ultrathin top-gated graphene is predicted.
Plasmons in graphene nanostructures show great promise for mid-infrared applications ranging from a few to tens of microns. However, mid-infrared plasmonic resonances in graphene nanostructures are usually weak and narrow-banded, limiting their potential in light manipulation and detection. Here we investigate the coupling among graphene plasmonic nanostructures and further show that by engineering the coupling, enhancement of light-graphene interaction strength and broadening of spectral width can be achieved simultaneously. Leveraging the concept of coupling, we demonstrate a hybrid 2-layer …
Using the Büttiker-Landauer formulation of transport theory in the linear response regime, the valley currents and non-local resistances of bilayer graphene nanostructures with broken inversion symmetry are calculated. It is shown that broken inversion symmetry in bilayer graphene nanostructures leads to striking enhancement of the non-local 4-terminal resistance and to valley currents several times stronger than the conventional electric current when the Fermi energy is in the spectral gap close to the energy of Dirac point. The scaling relation between local and non-local resistances is inve…
The development of functional composite nanomaterials based on graphene and metal nanoparticles (NPs) is currently the subject of intense research interest. In this study we report the preparation of novel type of graphene/Sn and graphene/SnOx (1 < x < 2) hybrid nanostructures and their investigation by scanning probe methods. First, we prepare Sn NPs by evaporating 7 - 8 nm tin on highly oriented pyrolytic graphite substrates. Graphene/Sn nanostructures are obtained by transferring graphene on top of the tin NPs immediately after evaporation. We show by scanning tunnelling microscopy (STM) an…
We review experimental and theoretical results on thermal transport in semiconductor nanostructures (multilayer thin films, core/shell and segmented nanowires), single- and few-layer graphene, hexagonal boron nitride, molybdenum disulfide and black phosphorus. Different possibilities of phonon engineering for optimization of electrical and heat conductions are discussed. The role of the phonon energy spectra modification on the thermal conductivity in semiconductor nanostructures is revealed. The dependence of thermal conductivity in graphene and related two-dimensional (2D) materials on tempe…
Coupled hybrid nanostructures are demonstrated using the combination of lithographically patterned graphene on top of a two-dimensional electron gas (2DEG) buried in a GaAs/AlGaAs heterostructure. The graphene forms Schottky barriers at the surface of the heterostructure and therefore allows tuning the electronic density of the 2DEG. Conversely, the 2DEG potential can tune the graphene Fermi energy. Graphene-defined quantum point contacts in the 2DEG show half-plateaus of quantized conductance in finite bias spectroscopy and display the 0.7 anomaly for a large range of densities in the constri…
We report the preparation of novel one-dimensional (1D) C60 nanostructures on rippled graphene. Through careful control of the subtle balance between the linear periodic potential of rippled graphene and the C60 surface mobility, we demonstrate that C60 molecules can be arranged into a 1D C60 chain structure with widths of two to three molecules. At a higher annealing temperature, the 1D chain structure transitions to a more compact hexagonal close packed quasi-1D stripe structure. This first experimental realization of 1D C60 structures on graphene may pave a way for fabricating new C60/graph…
The resistance of the electron gas at the interface between the two band insulators LaAlO3 (LAO) and SrTiO3 (STO) typically drops monotonically with temperature and R/T curves during cooling and warm-up look identical for large area structures. Here we show that if the LAO/STO is laterally restricted by nanopatterning the resistance exhibits a temperature anomaly. Warming up nanostructures from low temperatures leads to one or two pronounced resistance peaks between 50 and 100 K not observed for larger dimensions. During cool-down current filaments emerge at the domain walls that form during t…
Non-equilibrium molecular dynamics is used to investigate the heat current due to the atomic lattice vibrations in graphene nanoribbons and nanorings under a thermal gradient. We consider a wide range of temperature, nanoribbon widths up to 6nm and the effect of moderate edge disorder. We find that narrow graphene nanorings can efficiently suppress the lattice thermal conductivity at low temperatures (~100K), as compared to nanoribbons of the same width. Remarkably, rough edges do not appear to have a large impact on lattice energy transport through graphene nanorings while nanoribbons seem mo…
Probing techniques with spatial resolution have the potential to lead to a better understanding of the microscopic physical processes and to novel routes for manipulating nanostructures. We present scanning-gate images of a graphene quantum dot which is coupled to source and drain via two constrictions. We image and locate conductance resonances of the quantum dot in the Coulomb-blockade regime as well as resonances of localized states in the constrictions in real space.
In this paper, the form of the indirect interaction between local impurities in flakes and in graphene ring is analytically investigated. We calculate this characteristic in the framework of the tight-binding model for a finite nanocarbon system with periodic boundary conditions. A pronounced dependence of the bond value on the impurity position inside the graphene sample is found, which is due to quantum size effects. The influence of the flake size on the value of the indirect interaction constant is also studied.
Despite the enormous interest in the properties of graphene and the potential of graphene nanostructures in electronic applications, the study of quantum confined states in atomically well-defined graphene nanostructures remains an experimental challenge. Here, we study graphene quantum dots (GQDs) with well-defined edges in the zigzag direction, grown by chemical vapor deposition (CVD) on an iridium(111) substrate, by low-temperature scanning tunneling microscopy (STM) and spectroscopy (STS). We measure the atomic structure and local density of states (LDOS) of individual GQDs as a function o…
We present transport measurements on a tunable three-layer graphene single electron transistor (SET). The device consists of an etched three-layer graphene flake with two narrow constrictions separating the island from source and drain contacts. Three lateral graphene gates are used to electrostatically tune the device. An individual three-layer graphene constriction has been investigated separately showing a transport gap near the charge neutrality point. The graphene tunneling barriers show a strongly nonmonotonic coupling as function of gate voltage indicating the presence of localized stat…
We calculate the optical properties of atomic-sized core-shell graphene - boron nitride nanoflakes with triangular shaped crossection using the density functional theory. The optical properties can be tuned by using different sizes and proportions of the core-shell materials. Anisotropic effects manifested in the absorption of unpolarized light with different orientations of the optical vector are pointed out.
Plasmonics takes advantage of the collective response of electrons to electromagnetic waves, enabling dramatic scaling of optical devices beyond the diffraction limit. Here, we demonstrate the mid-infrared (4 to 15 microns) plasmons in deeply scaled graphene nanostructures down to 50 nm, more than 100 times smaller than the on-resonance light wavelength in free space. We reveal, for the first time, the crucial damping channels of graphene plasmons via its intrinsic optical phonons and scattering from the edges. A plasmon lifetime of 20 femto-seconds and smaller is observed, when damping throug…
Suspended graphene membrane presents a particular structure with fundamental interests and applications in nanomechanics, thermal transport and optoelectronics. Till now, the commonly used geometries are still quite simple and limited to the microscale. We propose here to overcome this problem by making nanostructures in suspended epitaxial bilayer graphene on a large scale and with a large variety of geometries. We also demonstrate a new hybrid thin film of SiC-graphene with an impressive robustness. Since the mechanics and thermal dissipation of a suspended graphene membrane are strongly rel…
Graphene is an interesting material for spintronics, showing long spin relaxation lengths even at room temperature. For future spintronic devices it is important to understand the behavior of the spins and the limitations for spin transport in structures where the dimensions are smaller than the spin relaxation length. However, the study of spin injection and transport in graphene nanostructures is highly unexplored. Here we study the spin injection and relaxation in nanostructured graphene with dimensions smaller than the spin relaxation length. For graphene nanoislands, where the edge length…
We study electronic transport in graphene/ferromagnetic insulator hybrid devices. The system comprises an armchair graphene nanoribbon with a lens-shaped EuO ferromagnetic insulator layer deposited on top of it. When the device supports a large number of propagating modes, the proximity exchange interaction of electrons with the magnetic ions of the ferromagnetic insulator results in electrons being spatially localised at different spots depending on their spin. We found the spin-dependent electron focusing is robust under moderate edge disorder. A spin-polarised electric current can be genera…
Zigzag edges of the honeycomb structure of graphene exhibit magnetic polarization making them attractive as building blocks for spintronic devices. Here, we show that devices with zigzag edged triangular antidots perform essential spintronic functionalities, such as spatial spin-splitting or spin filtering of unpolarized incoming currents. Near-perfect performance can be obtained with optimized structures. The device performance is robust against substantial disorder. The gate-voltage dependence of transverse resistance is qualitatively different for spin-polarized and spin-unpolarized devices…
In this paper we review the recent extraordinary progress in the development of a new quantum standard for resistance based on graphene. We discuss the unique properties of this material system relating to resistance metrology and discuss results of the recent highest-ever precision direct comparison of the Hall resistance between graphene and traditional GaAs. We mainly focus our review on graphene expitaxially grown on SiC, a system which so far resulted in the best results. We also brie y discuss progress in the two other graphene material systems, exfoliated graphene and chemical vapour de…
We perform first-principles calculations of electron transport across a nickel-graphene interface. Four different geometries are considered, where the contact area, graphene and nickel surface orientations and the passivation of the terminating graphene edge are varied. We find covalent bond formation between the graphene layer and the nickel surface, in agreement with other theoretical studies. We calculate the energy-dependent electron transmission for the four systems and find that the systems have very similar edge contact resistance, independent of the contact area between nickel and grap…
We show that quantum resistance standards made of transferred graphene reach the uncertainty of semiconductor devices, the current reference system in metrology. A large graphene device (150 \times 30 \mum2), exfoliated and transferred onto GaAs, revealed a quantization with a precision of (-5.1 \pm 6.3) \times 10-9 accompanied by a vanishing longitudinal resistance at current levels exceeding 10 \muA. While such performance had previously only been achieved with epitaxially grown graphene, our experiments demonstrate that transfer steps, inevitable for exfoliated graphene or graphene grown by…
We report an approach to achieve low-resistance contacts to MoS2 transistors with the intrinsic performance of the MoS2 channel preserved. Through a dry transfer technique and a metal-catalyzed graphene treatment process, nickel-etched-graphene electrodes were fabricated on MoS2 that yield contact resistance as low as 200 ohm-um. The substantial contact enhancement (~2 orders of magnitude) as compared to pure nickel electrodes, is attributed to the much smaller work function of nickel-graphene electrodes, together with the fact that presence of zigzag edges in the treated graphene surface enha…
Using ab-initio methods we investigate the possibility of three-terminal graphene "T-junction" devices and show that these all-graphene edge contacts are energetically feasible when the 1D interface itself is free from foreign atoms. We examine the energetics of various junction structures as a function of the atomic scale geometry. Three-terminal equilibrium Green's functions are used to determine the transmission spectrum and contact resistance of the system. We find that the most symmetric structures have a significant binding energy, and we determine the contact resistances in the junction…
We study transport properties of graphene nanostructures consisted of alternating slabs of gapless and gapped graphene in the presence of piecewise constant external potential equal to zero in the gapless regions. The transmission through single-, double-barrier structures and superlattices has been studied. It was revealed that any n-barrier structure is perfectly transparent at certain conditions defining the positions of new Dirac points created in the superlattice. The conductance and the shot noise were as well computed and investigated for the considered graphene systems. In a general ca…
We demonstrate that the low-frequency resistance fluctuations, or noise, in bilayer graphene is strongly connected to its band structure, and displays a minimum when the gap between the conduction and valence band is zero. Using double-gated bilayer graphene devices we have tuned the zero gap and charge neutrality points independently, which offers a versatile mechanism to investigate the low-energy band structure, charge localization and screening properties of bilayer graphene.
Potential steps naturally develop in graphene near metallic contacts. We investigate the influence of these steps on the transport in graphene Field Effect Transistors. We give simple expressions to estimate the voltage-dependent contribution of the contacts to the total resistance and noise in the diffusive and ballistic regimes.
In this paper, we report on the controllable negative differential resistance (NDR) in a proposed planar graphene superlattice structure. High value of peak to valley ratio (PVR) is predicted. This is significant because of appearance of NDR with high PVR at low biases. Our finding is important since beside the other potential applications of the graphene, proposes implementation of the graphene based superlattice in electronic devices such as resonant tunneling diode and filters.
The properties of graphene depend sensitively on doping with respect to the charge-neutrality point (CNP). Tuning the CNP usually requires electrical gating or chemical doping. Here, we describe a technique to reversibly control the CNP in graphene with nanoscale precision, utilizing LaAlO$_3$/SrTiO$_3$ (LAO/STO) heterostructures and conductive atomic force microscope (c-AFM) lithography. The local electron density and resulting conductivity of the LAO/STO interface can be patterned with a conductive AFM tip, and placed within two nanometers of an active graphene device. The proximal LAO/STO n…
Localized plasmons in metallic nanostructures have been widely used to enhance nonlinear optical effects due to their ability to concentrate and enhance light down to extreme-subwavelength scales. As alternatives to noble metal nanoparticles, graphene nanostructures can host long-lived plasmons that efficiently couple to light and are actively tunable via electrical doping. Here we show that doped graphene nanoislands present unique opportunities for enhancing nonlinear optical wave-mixing processes between two externally applied optical fields at the nanoscale. These small islands can support…
We study electron transport in nanostructures patterned in bilayer graphene patches grown epitaxially on SiC as a function of doping, magnetic field, and temperature. Away from charge neutrality transport is only weakly modulated by changes in carrier concentration induced by a local side-gate. At low n-type doping close to charge neutrality, electron transport resembles that in exfoliated graphene nanoribbons and is well described by tunnelling of single electrons through a network of Coulomb-blockaded islands. Under the influence of an external magnetic field, Coulomb blockade resonances flu…
We demonstrate a device concept to fabricate resistance standards made of quantum Hall series arrays by using p-type and n-type graphene. The ambipolar nature of graphene allows fabricating series quantum Hall resistors without complex multi-layer metal interconnect technology, which is required when using conventional GaAs two-dimensional electron systems. As a prerequisite for a precise resistance standard we confirm the vanishing of longitudinal resistance across a p-n junction for metrological relevant current levels in the range of a few \muA.
Precision quantum Hall resistance (QHR) measurements were performed on large-area epitaxial graphene device at low magnetic fields (B = 2 T - 8 T) at temperature T = 1.5 K. Hall resistance was measured using Cryogenic Current Comparator resistance bridge with high biasing current Isd = 40 micro ampere. The results showed that at B = 8 T the relative deviation of Hall resistance from the expected quantized value h/2e2 is within experimental uncertainty of 3.5 parts in 108 and remained below 0.35 parts per million (ppm) down to B = 3 T.
Two-dimensional (2D) materials for their versatile band structures and strictly 2D nature have attracted considerable attention over the past decade. Graphene is a robust material for spintronics owing to its weak spin-orbit and hyperfine interactions, while monolayer transition metal dichalcogenides (TMDs) possess a Zeeman effect-like band splitting in which the spin and valley degrees of freedom are nondegenerate. The surface states of topological insulators (TIs) exhibit a spin-momentum locking that opens up the possibility of controlling the spin degree of freedom in the absence of an exte…
In two-dimensional van der Waals (vdWs) materials, the relative twist angle between adjacent layers not only controls their electronic properties, but also determines their stacking energy. This effect makes it much easier to realize energetically favorable configurations of the vdWs materials, for example, Bernal-stacked structure of bilayer graphene. Here we demonstrate that we can controllably tailor adhesive energy landscape of graphene nanostructures on graphene and stabilize the system with tunable twist angle by using a one-dimensional tilt grain boundary (GB). The area ratio with diffe…
Metal contacts have been identified to be a key technological bottleneck for the realization of viable graphene electronics. Recently, it was observed that for structures that possess both a top and a bottom gate, the electron-hole conductance asymmetry can be modulated by the bottom gate. In this letter, we explain this observation by postulating the presence of an effective thin interfacial dielectric layer between the metal contact and the underlying graphene. Electrical results from quantum transport calculations accounting for this modified electrostatics corroborate well with the experim…
Graphene-metal contact resistance is governed by both intrinsic and extrinsic factors. Intrinsically, both the density of states bottleneck near the Dirac point and carrier reflection at the graphene-metal interface lead to a high contact resistance. Moreover, graphene exhibits insulating behavior for out-of-the-plane conduction. Extrinsically, surface contamination introduced by photoresist residue or different adsorbed species during standard lithography processing alters graphene's intrinsic properties by uncontrolled doping and increased scattering which results in high and inconsistent co…
We study the ballistic transmission and the contact resistance ($R_c$) of a graphite-graphene contact in a top contact geometry from first principles. We find that the calculated $R_c$'s depend on the amount of graphene-graphite overlap, but quickly saturate for transfer lengths of the order of 20 Å. For contacts overlapping more than this transfer length, the $R_c$ can be lower than the 100 Ω$\cdot$μm mark. On the other hand, edge graphite-graphene contacts are expected to have very low contact resistance.
The coupling of charge carrier motion and pseudospin via chirality for massless Dirac fermions in monolayer graphene has generated dramatic consequences, such as the unusual quantum Hall effect and Klein tunneling. In bilayer graphene, charge carriers are massive Dirac fermions with a finite density of states at zero energy. Because of their non-relativistic nature, massive Dirac fermions can provide an even better test bed with which to clarify the importance of chirality in transport measurement than massless Dirac fermions in monolayer graphene. Here, we report an electronic cloaking effect…
Graphene-metal nanoparticle hybrid materials potentially display not only the unique properties of metal nanoparticles and those of graphene, but also additional novel properties due to the interaction between graphene and nanoparticles. This study shows that gold nanoislands can be used to tailor the local electronic properties of graphene. Graphene on crystalline gold nanoislands exhibits moiré superlattices, which generate secondary Dirac points in the local density of states. Conversely, the graphene covered gold regions undergo a polycrystalline to Au(111) phase transition upon annealing.…
We present transfer-length-method measurements of the contact resistance between Cu and graphene, and a method to significantly reduce the contact resistance by vacuum annealing. Even in samples with heavily contaminated contacts, the contacts display very low contact resistance post annealing. Due to the common use of Cu, and it's low chemical reactivity with graphene, thermal annealing will be important for future graphene devices requiring non-perturbing contacts with low contact resistance.
We report development of a quantum Hall resistance standard accurate to a few parts in a billion at 300 mK and based on large area epitaxial graphene. The remarkable precision constitutes an improvement of four orders of magnitude over the best results obtained in exfoliated graphene and is similar to the accuracy achieved in well-established semiconductor standards. Unlike the traditional resistance standards the novel graphene device is still accurately quantized at 4.2 K, vastly simplifying practical metrology. This breakthrough was made possible by exceptional graphene quality achieved wit…
Since the advent of graphene, a variety of studies have been performed to elucidate its fundamental physics, or to explore its practical applications. Gate-tunable resistance is one of the most important properties of graphene and has been studied in 1-3 layer graphene in a number of efforts to control the band gap to obtain a large on-off ratio. On the other hand, the transport property of multilayer graphene with more than three layers is less well understood. Here we show a new aspect of multilayer graphene. We found that four-layer graphene shows intrinsic peak structures in the gate volta…
We consider the orbital magnetic properties of non-interacting charge carriers in graphene-based nanostructures in the low-energy regime. The magnetic response of such systems results both, frombulk contributions and from confinement effects that can be particularly strong in ballistic quantum dots. First we provide a comprehensive study of the magnetic susceptibility $χ$ of bulk graphene in a magnetic field for the different regimes arising from the relative magnitudes of the energy scales involved, i.e. temperature, Landau level spacing and chemical potential. We show that for finite tempera…
We report on realization of 10 quantum Hall devices in series fabricated using epitaxial graphene on silicon carbide. Precision measurements with a resistance bridge indicates that the quantized Hall resistance across an array at filling factor 2 is equivalent to 5 h/e^2 within the measurement uncertainty of approximately 4 10-8. A quantum-Hall phase diagram for the array shows that a metrological quantization of 5 h/e^2 can be achieved at the magnetic field of 6 T and temperature of 4 K. This experiment demonstrates the possibility of timely unchangeable resistance reference in various ranges…
We show that the strong coupling of pseudospin orientation and charge carrier motion in bilayer graphene has a drastic effect on transport properties of ballistic p-n-p junctions. Electronic states with zero momentum parallel to the barrier are confined under it for one pseudospin orientation, whereas states with the opposite pseudospin tunnel through the junction totally uninfluenced by the presence of confined states. We demonstrate that the junction acts as a cloak for confined states, making them nearly invisible to electrons in the outer regions over a range of incidence angles. This beha…
The longitudinal resistances of a six-terminal graphene p-n junction under a perpendicular magnetic field are investigated. Because of the chirality of the Hall edge states, the longitudinal resistances on top and bottom edges of the graphene ribbon are not equal. In the presence of suitable disorder, the top-edge and bottom-edge resistances well show the plateau structures in the both unipolar and bipolar regimes and the plateau values are determined by the Landau filling factors only. These plateau structures are in excellent agreement with the recent experiment. For the unipolar junction, t…
Negative differential resistance (NDR) with room temperature peak-valley-ratio of 8 has been observed in a ballistic field-effect-transistor (FET) based on graphene, having an oblique top gate. Graphene FETs with a top gate inclination angle of 45 degrees and a drain-source distance of 400 nm were fabricated on a chip cut from a 4 inch graphene wafer grown by CVD. From the 60 measured devices, NDR was observed only in the regions where the CVD graphene displays the Raman signature of defectless monolayers. In other specific positions on the wafer, where graphene quality was not high enough and…
The disclosure of basic nonlinear optical properties of graphene-like nanostructures with correlated electron-hole nonlinear dynamics over a wide range of frequencies and pump field intensities is of great importance for both graphene fundamental physics and for expected novel applications of 2D hexagonal nanostructures in extreme nonlinear optics. In the current paper, the nonlinear interaction of 2D hexagonal nanostructures with the bichromatic infrared driving field taking into account many-body Coulomb interaction is investigated. Numerical investigation in the scope of the Bloch equations…
We calculated a spin-polarized conductance in the almost unexplored nanostructure "high temperature ferromagnetic insulator/ graphene/ ferroelectric film" with a special attention to the impact of electric polarization rotation in a strained multiaxial ferroelectric film. The rotation and value of polarization vector are controlled by a misfit strain. We proposed a phenomenological model, which takes into account the shift of the Dirac point due to the proximity of ferromagnetic insulator and uses the Landauer formula for the conductivity of the graphene channel. We derived analytical expressi…
We study edge state magnetism in graphene nanostructures using a mean field theory of the Hubbard model. We investigate how the magnetism of the zigzag edges of graphene is affected by the presence of other types of terminating edges and defects. By a detailed study of both regular shapes, such as polygonal nanodots and nanoribbons, and irregular shapes, we conclude that the magnetism in zigzag edges is very robust. Our calculations show that the zigzag edges that are longer than three to four repeat units are always magnetic, irrespective of other edges, regular or irregular. We, therefore, c…
Hyperfine interactions, magnetic interactions between the spins of electrons and nuclei, in graphene and related carbon nanostructures are studied. By using a combination of accurate first principles calculations on graphene fragments and statistical analysis, I show that both isotropic and dipolar hyperfine interactions can be accurately described in terms of the local electron spin distribution and atomic structure. A complete set of parameters describing the hyperfine interactions of C-13 and other nuclear spins at substitution impurities and edge terminations is determined.
The construction of atomically-precise carbon nanostructures holds promise for developing novel materials for scientific study and nanotechnology applications. Here we show that graphene origami is an efficient way to convert graphene into atomically-precise, complex, and novel nanostructures. By scanning-tunneling-microscope manipulation at low temperature, we repeatedly fold and unfold graphene nanoislands (GNIs) along arbitrarily chosen direction. A bilayer graphene stack featuring a tunable twist angle and a tubular edge connection between the layers are formed. Folding single-crystal GNIs…
In this letter we present the results of systematic experimental investigations of the effect of different chemical environments on the low frequency resistance fluctuations of single layer graphene field effect transistors (SLG-FET). The shape of the power spectral density of noise was found to be determined by the energetics of the adsorption-desorption of molecules from the graphene surface making it the dominant source of noise in these devices. We also demonstrate a method of quantitatively determining the adsorption energies of chemicals on graphene surface based on noise measurements. W…
Exploring the mechanism of interfacial thermal transport and reducing the interfacial thermal resistance is of great importance for thermal management and modulation. Herein, the interfacial thermal resistance between overlapped graphene nanoribbons is largely reduced by adding bonded carbon chains by performing molecular dynamics simulations. And the analytical model (cross-interface model, CIM) is utilized to analyze and explain the two-dimensional thermal transport mechanism at cross-interface. An order of magnitude reduction in interfacial thermal resistance is found as the graphene nanori…
We investigate the unusual features of the quantum transport in gapped monolayer graphene, which is in a pseudospin symmetry-broken state with a net perpendicular pseudomagnetization. Using these pseudoferromagnets (PFs), we propose a perfect pseudospin valve effect that can be used for realizing pseudospintronics in monolayer graphene. The peculiarity of the associated effects of pseudo spin injection and pseudo spin accumulation are also studied. We further demonstrate the determining effect of the sublattice pseudospin degree of freedom on Andreev reflection and the associated proximity eff…
High-dose irradiation of nanostructures consisting of multiple graphene shells, such as spherical 'carbon onions' (CO) or cylindrical multi-walled carbon nanotubes (MWNT), induces shell shrinkage by bond reconstruction around irradiation-induced defects. This leads to build-up of internal stresses and to extreme pressures acting on encapsulated materials or on the carbon cores of the nanostructures. We formulate a model which relates the build-up of internal stresses to the point defect dynamics in graphene shells. Calculations are performed for the special case of irradiated CO. The results a…
