In order to harvest the many promising properties of graphene in (electronic) applications, a technique is required to cut, shape or sculpt the material on a nanoscale without damage to its atomic structure, as this drastically influences the electronic properties of the nanostructure. Here, we reveal a temperature-dependent self-repair mechanism allowing damage-free atomic-scale sculpting of graphene using a focused electron beam. We demonstrate that by sculpting at temperatures above 600 °C, an intrinsic self-repair mechanism keeps the graphene single-crystalline during cutting, even thought the electron beam induces considerable damage. Self-repair is mediated by mobile carbon ad-atoms constantly repairing the defects caused by the electron beam. Our technique allows reproducible fabrication and simultaneous imaging of single-crystalline free-standing nanoribbons, nanotubes, nanopores, and single carbon chains.
Spatial confinement of matter in functional nanostructures has propelled these systems to the forefront of nanoscience, both as a playground for exotic physics and quantum phenomena and in multiple applications including plasmonics, optoelectronics, and sensing. In parallel, the emergence of monochromated electron energy loss spectroscopy (EELS) has enabled exploration of local nanoplasmonic functionalities within single nanoparticles and the collective response of nanoparticle assemblies, providing deep insight into the associated mechanisms. However, modern synthesis processes for plasmonic …
In a recent letter [Phys. Rev. Lett. 105 (2010) 036804] the unoccupied electronic states of single layers of graphene on ruthenium are investigated. Here we comment on the interpretation, which deviates in four points from [J. Phys.: Condens. Matter 22 (2010) 302001] and outline the corresponding consequences.
Magnetic anisotropy is a key parameter of magnetic materials as it decides the response in the presence of an external magnetic field. The artificial tailoring of magnetic anisotropy by manipulating surface and interface morphology is attracting widespread interest for its application in spintronic and magnetic memory devices. In this perspective, the primary focus of this thesis has been inducing and tailoring magnetic anisotropy in thin film-based systems via the engineering of structure and surface/interfacial morphology. For this purpose, instead of multistep, expensive lithographic techni…
We report a first-principles study of hydrogen storage media consisting of calcium atoms and graphene-based nanostructures. We find that Ca atoms prefer to be individually adsorbed on the zigzag edge of graphene with a Ca-Ca distance of 10 A without clustering of the Ca atoms, and up to six H2 molecules can bind to a Ca atom with a binding energy of ~0.2 eV/H2. A Ca-decorated zigzag graphene nanoribbon (ZGNR) can reach the gravimetric capacity of ~5 wt % hydrogen. We also consider various edge geometries of the graphene for Ca dispersion.
We report the growth of Si nanostructures, either as thin films or nanoparticles, on graphene substrates. The Si nanostructures are shown to be single crystalline, air stable and oxidation resistive, as indicated by the observation of a single crystalline Si Raman mode at around 520 cm-1, a STM image of an ordered surface structure under ambient condition, and a Schottky junction with graphite. Ultra-thin silicon regions exhibit silicene-like behavior, including a Raman mode at around 550 cm-1, a triangular lattice structure in STM that has distinctly different lattice spacing from that of eit…
Control of the edge topology of graphene nanostructures is critical to graphene-based electronics. A means of producing atomically smooth zigzag edges using electronic current has recently been demonstrated in experiments [Jia et al., Science 323, 1701 (2009)]. We develop a microscopic theory for current-induced edge reconstruction using density functional theory. Our calculations provide evidence for localized vibrations at edge-interfaces involving unpassivated armchair edges. We demonstrate that these vibrations couple to the current, estimate their excitation by Joule heating, and argue th…
A hybrid structure of a graphene nanomesh with the gold nanodisks is studied to enhance the light absorption by localized surface plasmon resonance. From the reflection spectra of the visible range for graphene nanomesh samples without and with nanodisks, it is found that the absorption of graphene nanomesh structures is greatly enhanced in the presence of gold nanodisks around the resonance wavelength. Simulation results based on the finite-difference time-domain method support the experimental observations. This study demonstrates the potential of constructing graphene based photodetectors w…
We present a tight-binding parametrization for penta-graphene that correctly describes its electronic band structure and linear optical response. The set of parameters is validated by comparing to ab-initio density functional theory calculations for single-layer penta-graphene, showing a very good global agreement. We apply this parameterization to penta-graphene nanoribbons, achieving an adequate description of quantum-size effects. Additionally, a symmetry-based analysis of the energy band structure and the optical transitions involved in the absorption spectra is introduced, allowing for th…
Precise control of morphologies of one-dimensional (1D) or 2D nanostructures during growth has not been easily accessible, usually degrading the device performance and therefore limiting applications to various advanced nanoscale electronics and optoelectronics. Graphene could be a platform to serve as a substrate for both morphology control and direct use of electrodes due to its ideal monolayer flatness with π electrons. Here, we report that by using graphene directly as a substrate, vertically well-aligned ZnO nanowires and nanowalls were obtained systematically by controlling Au catalyst t…
The electronic and transport properties of hybrid armchair zigzag nanostructures including U-shaped graphene nanoribbons and patterned nanopores structured graphene were studied using combination of density functional theory and non-equilibrium Green function method. The density of state, electron transmission spectra, and molecular orbitals were analyzed. The obtained results show that GNRs junctions tend to open an energy gap when U-shaped structures were formed due to the formation of quasi-bound states at zigzag edges. The size of U shaped structures has enormous influences on the electron…
Strong dense many-spin interactions have been proposed to organize novel orbital dynamics (the Little Effect) for novel chemical and catalytic phenomena. The recent determinations of the relativistic and quantum Hall effects of carriers in graphene under strong magnetic confinement have substantiated the Little Effect. Moreover such nonclassical phenomena under the stronger magnetic confinement of ferro-nanocatalysts are here shown to organize reverse beta processes and possibly pycnonuclear reactions under high temperature and high-pressure conditions. Such processes have implications for rev…
It is shown that lines of adsorbed hydrogen pair atoms divide the graphene sheet into strips and form hydrogen-based superlattice structures (2HG-SL). We show that the forming of 2HG-SL drastically changes the electronic properties of graphene from semimetal to semiconductor. The electronic spectra of "zigzag" (n,0) 2HG-SL is similar to that of (n,0) carbon nanotubes and have a similar oscillation of band gap with number n, but with non-zero minimal values. The composite dual-periodic (n,0)+(m,0) 2HG-SLs of "zigzag" strips are analyzed, with the conclusion that they may be treated as quasi-two…
The ability to manufacture tailored graphene nanostructures is a key factor to fully exploit its enormous technological potential. We have investigated nanostructures created in graphene by swift heavy ion induced folding. For our experiments, single layers of graphene exfoliated on various substrates and freestanding graphene have been irradiated and analyzed by atomic force and high resolution transmission electron microscopy as well as Raman spectroscopy. We show that the dense electronic excitation in the wake of the traversing ion yields characteristic nanostructures each of which may be …
We use non-equilibrium molecular dynamics simulations to study the adverse role of defects including isotopic impurities on the thermal conductivity of carbon nanotubes, graphene and graphene nanoribbons. We find that even in structurally perfect nanotubes and graphene, isotopic impurities reduce thermal conductivity by up to one half by decreasing the phonon mean free path. An even larger thermal conductivity reduction, with the same physical origin, occurs in presence of structural defects including vacancies and edges in narrow graphene nanoribbons. Our calculations reconcile results of for…
In two-dimensional van der Waals (vdWs) materials, the relative twist angle between adjacent layers not only controls their electronic properties, but also determines their stacking energy. This effect makes it much easier to realize energetically favorable configurations of the vdWs materials, for example, Bernal-stacked structure of bilayer graphene. Here we demonstrate that we can controllably tailor adhesive energy landscape of graphene nanostructures on graphene and stabilize the system with tunable twist angle by using a one-dimensional tilt grain boundary (GB). The area ratio with diffe…
In a hierarchical nanopatterning routine relying exclusively on self-assembly processes we combine crystal surface reconstruction, microphase separation of copolymers, and selective metal diffusion to produce monodisperse metal nanostructures in highly regular arrays covering areas of square centimeters. In-situ GISAXS during Fe nanostructure formation evidences the outstanding structural order in the self-assembling system and hints at possibilities of sculpting nanostructures by external process parameters. Thus, we demonstrate that nanopatterning via self-assembly is a competitive alternati…
We calculated a spin-polarized conductance in the almost unexplored nanostructure "high temperature ferromagnetic insulator/ graphene/ ferroelectric film" with a special attention to the impact of electric polarization rotation in a strained multiaxial ferroelectric film. The rotation and value of polarization vector are controlled by a misfit strain. We proposed a phenomenological model, which takes into account the shift of the Dirac point due to the proximity of ferromagnetic insulator and uses the Landauer formula for the conductivity of the graphene channel. We derived analytical expressi…
Electron spin resonance (ESR) spectroscopy is an important tool to characterize the ground state of conduction electrons and to measure their spin-relaxation times. Observing ESR of the itinerant electrons is thus of great importance in graphene and in single-wall carbon nanotubes (SWCNTs). Often, the identification of CESR signal is based on two facts: the apparent asymmetry of the ESR signal (known as a Dysonian lineshape) and on the temperature independence of the ESR signal intensity. We argue that these are insufficient as benchmarks and instead the ESR signal intensity (when calibrated a…
We study edge state magnetism in graphene nanostructures using a mean field theory of the Hubbard model. We investigate how the magnetism of the zigzag edges of graphene is affected by the presence of other types of terminating edges and defects. By a detailed study of both regular shapes, such as polygonal nanodots and nanoribbons, and irregular shapes, we conclude that the magnetism in zigzag edges is very robust. Our calculations show that the zigzag edges that are longer than three to four repeat units are always magnetic, irrespective of other edges, regular or irregular. We, therefore, c…
Hyperfine interactions, magnetic interactions between the spins of electrons and nuclei, in graphene and related carbon nanostructures are studied. By using a combination of accurate first principles calculations on graphene fragments and statistical analysis, I show that both isotropic and dipolar hyperfine interactions can be accurately described in terms of the local electron spin distribution and atomic structure. A complete set of parameters describing the hyperfine interactions of C-13 and other nuclear spins at substitution impurities and edge terminations is determined.
The construction of atomically-precise carbon nanostructures holds promise for developing novel materials for scientific study and nanotechnology applications. Here we show that graphene origami is an efficient way to convert graphene into atomically-precise, complex, and novel nanostructures. By scanning-tunneling-microscope manipulation at low temperature, we repeatedly fold and unfold graphene nanoislands (GNIs) along arbitrarily chosen direction. A bilayer graphene stack featuring a tunable twist angle and a tubular edge connection between the layers are formed. Folding single-crystal GNIs…
Controlling magnetism of transition metal atoms by pairing with $π$ electronic states of graphene is intriguing. Herein, through first - principle computation we explore the possibility of switching magnetization by forming the tetrahedral $sp^3$ - metallic $d$ hybrid bonds. Graphene multilayers capped by single - layer cobalt atoms can transform into the $sp^3$ - bonded diamond films upon the hydrogenation of the bottom surface. While the conversion is favored by hybridization between the $sp^3$ dangling bonds and metallic $d_{z^2}$ states, such a strong hybridization can lead to the reorient…
Tailor-made magnetic nanostructures offer a variety of functionalities useful for technological applications. In this work, we explore the possibilities of realizing Fe nanostructures at the interfaces of 2D graphene and h-BN by ab initio density functional calculations. With the aid of ab initio Born-Oppenheimer molecular dynamics simulations and diffusion barriers calculated by nudged elastic band method, we find that (i) diffusion barriers of Fe on BN are much smaller than those on graphene, (ii) the Fe adatoms form clusters within a short time interval (~2.1 ps) and (iii) Fe clusters diffu…
Application of graphene-type materials in electrocatalysis is a topic of growing scientific and technological interest. A tremendous amount of research has been carried out in the field of oxygen electroreduction, particularly with respect to potential applications in the fuel cell research also with use of graphene-type catalytic components. This work addresses fundamental aspects and potential applications of graphene structures in the oxygen reduction electrocatalysis. Special attention will be paid to creation of catalytically active sites by using non-metallic heteroatoms as dopants, form…
Integration of two-dimensional (2D) van der Waals (vdWs) materials with non-2D materials to realize mixed-dimensional heterostructures has potential for creating functional devices beyond the reach of existing materials and has long been a pursuit of the material science community. Here we report the patterning of monolayer/bilayer transition metal dichalcogenide (TMD) nanostructures with nanometer-precision, tunable sizes and sites at interfaces of graphene/TMD heterostructures. Our experiments demonstrate that the TMD nanostructures can be created at selected positions of the interface using…
We investigated theoretically the effect of covalent edge functionalization, with organic functional groups, on the electronic properties of graphene nanostructures and nano-junctions. Our analysis shows that functionalization can be designed to tune electron affinities and ionization potentials of graphene flakes, and to control the energy alignment of frontier orbitals in nanometer-wide graphene junctions. The stability of the proposed mechanism is discussed with respect to the functional groups, their number as well as the width of graphene nanostructures. The results of our work indicate t…
We propose a mechanism to drive singlet-triplet spin transitions electrically, in a wide class of graphene nanostructures that present pairs of in-gap zero modes, localized at opposite sublattices. Examples are rectangular nanographenes with short zigzag edges, armchair ribbon heterojunctions with topological in-gap states and graphene islands with sp$^3$ functionalization. The interplay between the hybridization of zero modes and Coulomb repulsion leads to symmetric exchange interaction that favors a singlet ground state. Application of an off-plane electric field to the graphene nanostructur…
Propagating atomic vibrational waves, phonons, rule important thermal, mechanical, optoelectronic and transport characteristics of materials. Thus the knowledge of phonon dispersion, namely the dependence of vibrational energy on momentum is a key ingredient to understand and optimize the material's behavior. However, despite its scientific importance in the last decade, the phonon dispersion of a freestanding monolayer of two dimensional (2D) materials such as graphene and its local variations has still remained elusive because of experimental limitations of vibrational spectroscopy. Even tho…
Recent years witnessed a rapid growth of interest of scientific and engineering communities to thermal properties of materials. Carbon allotropes and derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range - of over five orders of magnitude - from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. I review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon mat…
Plasmons --the collective oscillations of electrons in conducting materials-- play a pivotal role in nanophotonics because of their ability to couple electronic and photonic degrees of freedom. In particular, plasmons in graphene --the atomically thin carbon material-- offer strong spatial confinement and long lifetimes, accompanied by extraordinary optoelectronic properties derived from its peculiar electronic band structure. Understandably, this material has generated great expectations for its application to enhanced integrated devices. However, an efficient scheme for detecting graphene pl…
We report the results of an experimental study of thermal and magnetic properties of nanostructured ferrimagnetic iron oxide composites with graphene and graphite fillers synthesized via the current activated pressure assisted densification. The thermal conductivity was measured using the laser-flash and transient plane source techniques. It was demonstrated that addition of 5 wt. % of equal mixture of graphene and graphite flakes to the composite results in a factor of x2.6 enhancement of the thermal conductivity without significant degradation of the saturation magnetization. The microscopy …
Phonons - quanta of crystal lattice vibrations - reveal themselves in all electrical, thermal and optical phenomena in materials. Nanostructures open exciting opportunities for tuning the phonon energy spectrum and related properties of materials for specific applications. The possibilities for controlled modification of the phonon transport and phonon interactions - referred to as phonon engineering or phononics - increase even further with the advent of graphene and two-dimensional van der Waals materials. We describe methods for tuning the phonon spectrum and controlling the thermal propert…
Carbon nanostructures with zigzag edges exhibit unique properties with exciting potential applications. Such nanostructures are generally synthesized under vacuum because their zigzag edges are unstable under ambient conditions: a barrier that must be surmounted to achieve their scalable exploitation. Here, we prove the viability of chemical protection/deprotection strategies for this aim, demonstrated on labile chiral graphene nanoribbons (chGNRs). Upon hydrogenation, the chGNRs survive an exposure to air, after which they are easily converted back to their original structure via annealing. W…
We report on suspended single-layer graphene deposition by a transfer-printing approach based on polydimethylsiloxane stamps. The transfer printing method allows the exfoliation of graphite flakes from a bulk graphite sample and their residue-free deposition on a silicon dioxide substrate. This deposition system creates a blistered graphene surface due to strain induced by the transfer process itself. Single-layer-graphene deposition and its "blistering" on the substrate are demonstrated by a combination of Raman spectroscopy, scanning electron microscopy and atomic-force microscopy measuremen…
The impact of the edges and presence of dopants to the work function (WF) of graphene nanoribbons (GNR) and nanoflakes was studied by an ab initio approach. The strong dependence of the WF upon the GNR structure was found and a promising character for the field emission by the donor type impurities was observed. Basing on the predominant impact of the nanostructure edges to the emission properties, the small graphene flakes were investigated as a possible source for the electron emission. The obtained weak dependence of the low WF values of the graphene flakes on their size and shape allows to…
Graphene is a unique material to study fundamental limits of plasmonics. Apart from the ultimate single-layer thickness, its carrier concentration can be tuned by chemical doping or applying an electric field. In this manner the electrodynamic properties of graphene can be varied from highly conductive to dielectric. Graphene supports strongly confined, propagating surface plasmon-polaritons (SPPs) in a broad spectral range from terahertz to mid-infrared frequencies. It also possesses a strong magneto-optical response and thus provides complimentary architectures to conventional magneto-plasmo…
Magnetic materials and nanostructures based on carbon offer unique opportunities for future technological applications such as spintronics. This article reviews graphene-derived systems in which magnetic correlations emerge as a result of reduced dimensions, disorder and other possible scenarios. In particular, zero-dimensional graphene nanofragments, one-dimensional graphene nanoribbons, and defect-induced magnetism in graphene and graphite are covered. Possible physical mechanisms of the emergence of magnetism in these systems are illustrated with the help of computational examples based on …
A description is given of a three-dimensional box-shaped graphene (BSG) nanostructure formed/uncovered by mechanical cleavage of highly oriented pyrolytic graphite (HOPG). The discovered nanostructure is a multilayer system of parallel hollow channels located along the surface and having quadrangular cross-section. The thickness of the channel walls/facets is approximately equal to 1 nm. The typical width of channel facets makes about 25 nm, the channel length is 390 nm and more. The investigation of the found nanostructure by means of a scanning tunneling microscope (STM) allows us to draw a …
Thermal conductivity measurements over variable lengths on nanostructures such as nanowires provide important information about the mean free paths (MFPs) of the phonons responsible for heat conduction. However, nearly all of these measurements have been interpreted using an average MFP even though phonons in many crystals possess a broad MFP spectrum. Here, we present a reconstruction method to obtain MFP spectra of nanostructures from variable-length thermal conductivity measurements. Using this method, we investigate recently reported length-dependent thermal conductivity measurements on Si…
The near-field Coulomb interaction between a nano-emitter and a graphene monolayer results in strong Förster-type resonant energy transfer and subsequent fluorescence quenching. Here, we investigate the distance dependence of the energy transfer rate from individual, i) zero-dimensional CdSe/CdS nanocrystals and ii) two-dimensional CdSe/CdS/ZnS nanoplatelets to a graphene monolayer. For increasing distances $d$, the energy transfer rate from individual nanocrystals to graphene decays as $1/d^4$. In contrast, the distance dependence of the energy transfer rate from a two-dimensional nanoplatele…
Recently, two-dimensional nanostructures consisting of alternating graphene and boron nitride (BN) domains have been synthesized. These systems possess interesting electronic and mechanical properties, with potential applications in electronics and optical devices. Here, we perform a first-principles investigation of models of BN-C hybrid monolayers and nanoribbons deposited on the Cu(111) surface, a substrate used for their growth in said experiments. For the sake of comparison, we also consider BN and BC2N nanostructures. We show that BN and BC2N monolayers bind weakly to Cu(111), whereas mo…
A blueprint for producing scalable digital graphene electronics has remained elusive. Current methods to produce semiconducting-metallic graphene networks all suffer from either stringent lithographic demands that prevent reproducibility, process-induced disorder in the graphene, or scalability issues. Using angle resolved photoemission, we have discovered a unique one dimensional metallic-semiconducting-metallic junction made entirely from graphene, and produced without chemical functionalization or finite size patterning. The junction is produced by taking advantage of the inherent, atomical…
Continuous miniaturization of magnetic units in spintronics and quantum computing devices inspires efforts to search for magnetic nanostructures with large magnetic anisotropy energy (MAE). Typical nanostructures including molecular magnets, magnetic nanoclusters and magnetic nanowires have MAEs of a few meV so their blocking temperature is mostly lower than 50 K. In this work, we demonstrated the feasibility of achieving giant MAE in systems with transition metal dimers on defected and decorated graphene, based on density functional theory calculations. In particular, either a Pt-Ir dimer on …
Chemical and structural diversity present in hexagonal boron nitride ((h-BN) and graphene hybrid nanostructures provide new avenues for tuning various properties for their technological applications. In this paper we investigate the variation of thermal conductivity ($κ$) of hybrid graphene/h-BN nanostructures: stripe superlattices and BN (graphene) dots embedded in graphene (BN) are investigated using equilibrium molecular dynamics. To simulate these systems, we have parameterized a Tersoff type interaction potential to reproduce the ab initio energetics of the B-C and N-C bonds for studying …
The indirect Ruderman-Kittel-Kasuya-Yosida (RKKY) coupling between on-site magnetic impurities is studied for two kinds of graphene nanoflakes consisting of approximately 100 carbon atoms, posessing either zigzag or armchair edge. The tight-binding Hamiltonian with Hubbard term is used in non-perturbative calculations of coupling between the impurities placed at the edge of the structure. In general, for zigzag-edged nanoflakes a pronounced coupling robust against charge doping is found, while for armchair-edged structures the interaction is weaker and much more sensitive to charge doping. Als…
This work explores a nontrivial temperature behavior of the carriers concentration, which governs graphene channel conductance in the nano-structure "graphene channel on ferroelectric substrate" that is a basic element for FETs in non-volatile memory units of new generation. We revealed the transition from a single to double antiferroelectric-like hysteresis loop of the concentration voltage dependence that happens with the temperature increase and then exist in a wide temperature range (from 350 to 500 K). Unexpectedly we revealed the double loops of polarization and concentration can have ir…
We have developed an unifying tight-binding Hamiltonian that can account for the electronic properties of recently proposed Si-based nanostructures, namely, Si graphene-like sheets and Si nanotubes. We considered the $sp^3s^*$ and $sp^{3}$ models up to first- and second-nearest neighbors, respectively. Our results show that the Si graphene-like sheets considered here are metals or zero-gap semiconductors, and that the corresponding Si nanotubes follow the so-called Hamada's rule [Phys. Rev. Lett. {\bf 68}, 1579 1992]. Comparison to a recent {\it ab initio} calculation is made.
As a critical way to modulate thermal transport in nanostructures, phonon resonance hybridization has become an issue of great concern in the field of phonon engineering. In this work, we optimized phonon transport across graphene nanoribbon and obtained minimized thermal conductance by means of designing pillared nanostructures based on resonance hybridization. Specifically, the optimization of thermal conductance was performed by the combination of atomic Green` s function and Bayesian optimization. Interestingly, it is found that thermal conductance decreases non-monotonically with the incr…
Theoretical progress in graphene physics has largely relied on the application of a simple nearest-neighbor tight-binding model capable of predicting many of the electronic properties of this material. However, important features that include electron-hole asymmetry and the detailed electronic bands of basic graphene nanostructures (e.g., nanoribbons with different edge terminations) are beyond the capability of such simple model. Here we show that a similarly simple plane-wave solution for the one-electron states of an atom-based two-dimensional potential landscape, defined by a single fittin…
Amongst the wide spectrum of potential applications of graphene, ranging from transistors and chemical-sensors to nanoelectromechanical devices and composites, the field of photonics and optoelectronics is believed to be one of the most promising. Indeed, graphene's suitability for high-speed photodetection was demonstrated in an optical communication link operating at 10 Gbit/s\cite. However, the low responsivity of graphene-based photodetectors compared to traditional III-V based ones is a potential drawback. Here we show that, by combining graphene with plasmonic nanostructures, the efficie…
We report electronic measurements on high-quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely-suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths…
Prompted by recent reports on $\sqrt{3} \times \sqrt{3}$ graphene superlattices with intrinsic inter-valley interactions, we perform first-principles calculations to investigate the electronic properties of periodically nitrogen-doped graphene and carbon nanotube nanostructures. In these structures, nitrogen atoms substitute one-sixth of the carbon atoms in the pristine hexagonal lattices with exact periodicity to form perfect $\sqrt{3} \times \sqrt{3}$ superlattices of graphene and carbon nanotubes. Multiple nanostructures of $\sqrt{3} \times \sqrt{3}$ graphene ribbons and carbon nanotubes ar…
Grain boundaries are commonly observed in carbon nanostructures, but their influence on thermal and electric properties are still not completely understood. Using a combined approach of density functional tight-binding theory and non-equilibrium Green functions we investigate electron and phonon transport in carbon based systems. In this work, quantum transport and thermoelectric properties are summarized for graphene sheets, graphene nanoribbons and carbon nanotubes with a variety of grain boundary types in a wide temperature range. Motivated by previous findings that disorder scatters phonon…
Understanding the magnetic properties of graphenic nanostructures is instrumental in future spintronics applications. These magnetic properties are known to depend crucially on the presence of defects. Here we review our recent theoretical studies using density functional calculations on two types of defects in carbon nanostructures: Substitutional doping with transition metals, and sp$^3$-type defects created by covalent functionalization with organic and inorganic molecules. We focus on such defects because they can be used to create and control magnetism in graphene-based materials. Our mai…
A novel design has been proposed for a facile and rapid build-up of highly tailorable nanostructured multishells on metal oxide particles (graphene/TiOx@TiO2) under a dry inert atmosphere to maximize the visible-light photocatalytic performance. We also thoroughly and systematically investigated the as-prepared nanostructured particle surface and the mechanisms of the extraordinary in-situ graphene growth on the TiOx@TiO2 nanoparticles achieved by a rapid-concomitant reaction in the metal oxide (TiO2)/polymer (polymethyl methacrylate) interface under microwave irradiation. The as-prepared comp…
Herein, we investigate the structural, electronic and mechanical properties of zigzag graphene nanoribbons upon the presence of stress applying Density Functional Theory within the GGA-PBE approximation. The uniaxial stress is applied along the periodic direction, allowing a unitary deformation in the range of +/- 0.02%. The mechanical properties show a linear-response within that range while the non-linear dependence is found for higher strain. The most relevant results indicate that Young's modulus is considerable higher than those determined for graphene and carbon nanotubes. The geometrica…
We show that free electrons can efficiently excite plasmons in doped graphene with probabilities of order one per electron. More precisely, we predict multiple excitations of a single confined plasmon mode in graphene nanostructures. These unprecedentedly large electron-plasmon couplings are explained using a simple scaling law and further investigated through a general quantum description of the electron-plasmon interaction. From a fundamental viewpoint, multiple plasmon excitations by a single electron provides a unique tool for exploring the bosonic quantum nature of these collective modes.…
Nonreciprocal plasmons in one-dimensional carbon nanostructures
Max-Born-Institut（马克斯·玻恩研究所）；Center for Nanophotonics, NWO Institute AMOLF（纳米光子学中心，NWO AMOLF研究所）；ICFO-Institut de Ciencies Fotoniques, The Barcelona Institute of Science and Technology（ICFO-光子科学研究所，巴塞罗那科学技术研究所）；ICREA-Institució Catalana de Recerca i Estudis Avançats（ICREA-加泰罗尼亚研究高级学院）；POLIMA—Center for Polariton-driven Light–Matter Interactions, University of Southern Denmark（POLIMA-极化激元驱动光物质相互作用中心，南丹麦大学）；Danish Institute for Advanced Study, University of Southern Denmark（丹麦高等研究院，南丹麦大学）
