We investigate current-driven domain wall (DW) propagation in magnetic nanowires in the framework of the modified Landau-Lifshitz-Gilbert equation with both adiabatic and nonadiabatic spin torque (NAST) terms. Contrary to the common opinion that NAST is indispensable for DW motion[1,2], we point out that adiabatic spin torque (AST) only is enough for current-driven DW motion in a cylindrical (uniaxial) nanowire. Apart from a discussion of the rigid DW motion from the energy and angular momentum viewpoint, we also propose an experimental scheme to measure the spin current polarization by combining both field and current driven DW motion in a flat (biaxial) wire.
Cylindrical nanowires made of soft magnetic materials, in contrast to thin strips, may host domain walls of two distinct topologies. Unexpectedly, we evidence experimentally the dynamic transformation of topology upon wall motion above a field threshold. Micromagnetic simulations highlight the underlying precessional dynamics for one way of the transformation, involving the nucleation of a Bloch-point singularity, however, fail to reproduce the reverse process. This rare discrepancy between micromagnetic simulations and experiments raises fascinating questions in material and computer science.
A next-generation memory device utilizing a three-dimensional nanowire system requires the reliable control of domain wall motion. In this letter, domain walls are studied in cylindrical nanowires consisting of alternating segments of cobalt and nickel. The material interfaces acting as domain wall pinning sites, are utilized in combination with current pulses, to control the position of the domain wall, which is monitored using magnetoresistance measurements. Magnetic force microscopy results further confirm the occurrence of current assisted domain wall depinning. Data bits are therefore shi…
We report several procedures for the robust nucleation of magnetic domain walls in cylindrical permalloy nanowires. Specific features of the magnetic force microscopy contrast of such soft wires are discussed, with a view to avoid the misinterpretation of the magnetization states. The domain walls could be moved under quasistatic magnetic fields in the range 0.1--10 mT.
Spin torque oscillators (STOs) are emerging microwave devices that can potentially be used in spin-logic devices and the next-generation high-speed computing architecture. Thanks to their non-linear nature, STOs are easily tunable by the magnetic field and the dc current. Spin Hall nano-oscillators (SHNOs) are promising types of STOs and most of the current studies focus on localized modes that can be easily excited. Here, we study using micromagnetic simulations, the nature of the spin-torque-induced excitations in nanowire devices made of perpendicular magnetic anisotropy (PMA) material. Our…
We probe magnetic domain walls in cylindrical soft magnetic nanowires using electron holography. We detail the modelling of expected contrast for both transverse and Bloch point domain walls and provide comparison with experimental observations performed on NiCo nanowires, involving also both magnetic and electrostatic contribution to the electron holography map. This allows the fast determination of the domain wall type without the need for uneasy and time-consuming experimental removal of the electrostatic contribution. Finally, we describe and implement a new efficient algorithm for calcula…
We present experimental evidence of metastable magnetic domains in cylindrical CoNi nanowires. Transverse (perpendicular) domains have been previously observed only in flat nanostrips. Here they are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar free energies. The surface and the inner magnetization distribution in both types of domains are analyzed by Photo-Emission Electron Microscopy (PEEM) with X-ray magnetic circular dichroism (XMCD) contrast, and hysteresis loop in individual nanowires are measured by Magn…
Speed and reliability of magnetic domain wall (DW) motion are key parameters that must be controlled to realize the full potential of DW-based magnetic devices for logic and memory applications. A major hindrance to this is extrinsic DW pinning at specific sites related to shape and material defects, which may be present even if the sample synthesis is well controlled. Understanding the origin of DW pinning and reducing it is especially desirable in electrochemically-deposited cylindrical magnetic nanowires (NWs), for which measurements of the fascinating physics predicted by theoretical compu…
The growing demand for storage, due to big data applications, cannot be met by hard disk drives. Domain wall (DW) memory devices such as racetrack memory offer an alternative route to achieve high capacity storage. In DW memory, control of domain wall positions and their motion using spin-transfer torque are important challenges. In this paper, we demonstrate controlled domain wall motion using spin-transfer torque in staggered magnetic nanowires. The devices, fabricated using electron-beam lithography, were tested using a magneto-optical Kerr microscopy and electrical transport measurements. …
Recent studies have revealed that domain walls in magnetic nanostructures can serve as compact, energy-efficient spin-wave waveguides for building magnonic devices that are considered promising candidates for overcoming the challenges and bottlenecks of today's CMOS technologies. However, imprinting long strip-domain walls into magnetic nanowires remains a challenge, especially in curved geometries. Here, through micromagnetic simulations, we present a method for writing strip-domain walls into curved magnetic nanowires using spin-orbit torque. We employ Y-shaped magnetic nanostructures as wel…
We present a theoretical analysis of Dirac magneto-plasmons in topological insulator nanowires. We discuss a cylindrical geometry where Berry phase effects induce the opening of a gap at the neutrality point. By taking into account surface electron wave functions introduced in previous papers and within the random phase approximation, we provide an analytical form of the dynamic structure factor. Dispersions and spectral weights of Dirac plasmons are studied with varying the radius of the cylinder, the surface doping, and the strength of an external magnetic field. We show that, at zero surfac…
The future developments of three-dimensional magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in planar magnetic strips (planar nanowires), few reports exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here we report this investigation in cylindrical magnetic Ni nanowires with geometrical notches. Experimental work based on synchrotron X-ray magnetic circular dichroism (XMCD) combined with photoemission electron microscopy (PEEM) indicates that large cu…
An analytical model of the spin-diode effect induced by resonant spin-transfer torque in a ferromagnetic bilayer with strong dipolar coupling provides the resonance frequencies and the lineshapes of the magnetic field spectra obtained under field or laser-light modulation. The effect of laser irradiation is accounted for by introducing the temperature dependence of the saturation magnetization and anisotropy, as well as thermal spin-transfer torques. The predictions of the model are compared with experimental data obtained with single Co/Cu/Co spin valves, embedded in nanowires and produced by…
The Dzyaloshinskii Moriya Interaction (DMI) has laid the foundation for many novel chiral structures such as Skyrmions. In most of the studies so far, the DMI is present in the whole of the magnetic layer. Here, we report our investigations on a ferromagnetic nanowire where DMI is confined to a nanoscale region. We observe that the local modulation of magnetic properties causes oscillation of domain walls under the influence of spin-transfer torque. The oscillation frequency is tunable within a few GHz, making this observation potentially useful for applications in neuromorphic computing.
In this paper we compute and compare the surface energy of various Ga liquid droplets wetting a cylindrical cavity in various configurations. While for some of these configurations the surface energy can be computed explicitely for others numerical computation is needed. Motivated by the results obtained for the cylindrical cavities we explore the case of the more realistic situation, conical cavities. Our results provide a relation between the geometry of the conical cavity and the equilibirum wetting angles of the droplet on the bottom and on the sidewall of the cavity which insure the dewet…
We study the magnetic properties of cylindrical ferromagnetic core - antiferromagnetic shell nanowires using Monte Carlo simulations and a classical Heisenberg Hamiltonian in order to elucidate the impact of the oxidized shell on the magnetic properties and the magnetization reversal mechanism. We find that the coupling to the antiferromagnetic shell leads to suppression of the coercivity and emergence of a weak exchange bias effect. Comparison of the magnetization reversal mechanism in the bare and the surface-oxidized nanowire reveals that the domain wall propagation and annihilation remains…
A novel method for measuring the surface coverage of randomly distributed cylindrical nanoparticles such as nanorods and nanowires, using atomic force microscopy (AFM), is presented. The method offers several advantages over existing techniques such as particle beam and x-ray diffraction spectroscopy. These include, subnanometer vertical and lateral resolution, non destructive interaction with the sample surface allowing repeated measurements, user-friendly setup and ambient operating conditions. The method relies on the use of a statistical model to describe the variations of the nanoparticle…
We demonstrate from both simulation and experiment a simple scheme for selective injection of multiple domain walls in a magnetic nanowire. The structure consists of a side-contact misaligned Hall bar made of ferromagnet/heavy metal bilayers. The combination of current-induced spin-orbit torque and an external magnetic field allows for the formation of localized domains with specific magnetization direction and length, thereby creating domain walls in predetermined locations. With the side contacts at two sides misaligned for a distance that is comparable to the contact width, it is possible t…
