Achieving coherent quantum control over massive mechanical resonators is a current research goal. Nano- and micromechanical devices can be coupled to a variety of systems, for example to single electrons by electrostatic or magnetic coupling, and to photons by radiation pressure or optical dipole forces. So far, all such experiments have operated in a regime of weak coupling, in which reversible energy exchange between the mechanical device and its coupled partner is suppressed by fast decoherence of the individual systems to their local environments. Controlled quantum experiments are in principle not possible in such a regime, but instead require strong coupling. So far, this has been demonstrated only between microscopic quantum systems, such as atoms and photons (in the context of cavity quantum electrodynamics) or solid state qubits and photons. Strong coupling is an essential requirement for the preparation of mechanical quantum states, such as squeezed or entangled states, and also for using mechanical resonators in the context of quantum information processing, for example, as quantum transducers. Here we report the observation of optomechanical normal mode splitting, which provides unambiguous evidence for strong coupling of cavity photons to a mechanical resonator. This paves the way towards full quantum optical control of nano- and micromechanical devices.
Ground state cooling of micromechanical oscillator is a paradigmatic goal for observing quantum mechanical effects in cavity optomechanics. We study theoretically the ground state cooling of a mechanical oscillator in an optomechanical cavity in presence of a quantum well placed inside the cavity. Due to mode tailoring in presence of the quantum well, the cavity response gets modified and leads to asymmetric heating and cooling processes. This facilitates the cooling of the mechanical oscillator even in the unresolved-sideband regime, via inhibition of Stokes scattering.
Generation of motional nonlinear coherent states and their superpositions via intensity-dependent coupling of a cavity field to a micromechanical membrane
The ground state cooling of a mechanical oscillator in an optomechanical cavity containing an ensemble of identical two-level ground-state atoms is studied in the highly unresolved-sideband regime. The system exhibits electromagnetically-induced transparency-like quantum interference effect. The mutual interaction with the cavity optical field gives rise to an indirect coupling between the atomic and mechanical modes. In presence of this interaction, the noise spectrum gets modified and leads to asymmetric cooling and heating rates. Using the quantum master equation, time evolution of the aver…
Multimode optomechanical systems are an emerging platform for studying fundamental aspects of matter near the quantum ground state and are useful in sensitive sensing and measurement applications. We study optomechanical cooling in a system where two nearly degenerate mechanical oscillators are coupled to a single microwave cavity. Due to an optically mediated coupling the two oscillators hybridize into a bright mode with strong optomechanical cooling rate and a dark mode nearly decoupled from the system. We find that at high coupling, sideband cooling of the dark mode is strongly suppressed. …
Cavity optomechanics provides a unique platform for controlling micromechanical systems by means of optical fields that crosses the classical-quantum boundary to achieve solid foundations for quantum technologies. Currently, optomechanical resonators have become promising candidates for the development of precisely controlled nano-motors, ultrasensitive sensors and robust quantum information processors. For all these applications, a crucial requirement is to cool the mechanical resonators down to their quantum ground states. In this paper, we present a novel cooling scheme to further cool a mi…
Achieving quantum correlations between two distant systems is a desirable feature for quantum networking. In this work, we study a system composed of two quantum emitter-cavity subsystems spatially separated. A mechanical resonator couples to either both quantum emitters or both cavities leading to quantum correlations between both subsystems such as non-local light-matter dressed states and cavity-cavity normal mode splitting. These indirect couplings can be explained by an effective Hamiltonian for large energy detuning between the mechanical resonator and the atoms/cavities. Moreover, it is…
Coupled electromechanical resonators that can be independently driven/detected and easily integrated with external circuits are essential for exploring mechanical modes based signal processing. Here, we present a room temperature phonon-cavity electromechanical system, consisting of two distinct resonators: a silicon nitride electromechanical drum capacitively coupled to an aluminum one. We demonstrate electromechanically induced transparency and amplification in a two-tone driving scheme and observe the phonon-cavity force affecting the mechanical damping rates of both movable objects. We als…
We theoretically investigate the stability of a two cascaded cavity optomechanical system with optical parametric amplifiers (OPAs) inside the two coupled cavities, and study the steady-state entanglement between two distant mechanical resonators. We show that the parameter regime where the system is unstable without OPAs, such as relatively high laser intensity and blue detuning, can be exploited to build the steady-state mechanical entanglement by modulating the parametric gain. The application of OPAs is helpful to preserve the mechanical entanglement suffered from the dissipation at some f…
We theoretically analyse the cooling dynamics of a high-Q mode of a mechanical resonator, when the structure is also an optical cavity and is coupled with a NV center. The NV center is driven by a laser and interacts with the cavity photon field and with the strain field of the mechanical oscillator, while radiation pressure couples mechanical resonator and cavity field. Starting from the full master equation we derive the rate equation for the mechanical resonator's motion, whose coefficients depend on the system parameters and on the noise sources. We then determine the cooling regime, the c…
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this fabrication process, a high-impedance $8.9$GHz coil resonator is coupled capacitively with large participation ratio to a $9.7$MHz micromechanical resonator. Two-tone microwave spectroscopy and radiation pressure back-action are used to characterize the coupled system in a dilution refrigerator down to temperatures of $T_f = 11$~mK, yielding a measured electrome…
Back-action evasion and squeezing of a mechanical resonator using a cavity detector
本文研究了利用参变耦合电磁腔对悬臂梁的量子测量。该方案最初是由于Braginsky等人[V.Braginsky，Y. I. Vorontsov和K. P.Thorne，Science 209，547（1980）]，允许悬臂运动的一个正交的反作用自由测量，并且因此有可能产生压缩状态。我们提出了一个完整的量子理论，这个系统，并推导出简单的条件时，量子限制的附加噪声可以被超越。我们还研究了测量的条件动力学，并讨论了如何这样的计划（与反馈耦合时）可以用来产生和检测压缩态的振荡器。我们的研究结果是相关的光学力学实验，并在量子力学实验中采用带状线谐振器耦合到机械谐振器。
The strong coupling limit of cavity quantum electrodynamics (QED) implies the capability of a matter-like quantum system to coherently transform an individual excitation into a single photon within a resonant structure. This not only enables essential processes required for quantum information processing but also allows for fundamental studies of matter-light interaction. In this work we demonstrate strong coupling between the charge degree of freedom in a gate-detuned GaAs double quantum dot (DQD) and a frequency-tunable high impedance resonator realized using an array of superconducting quan…
Entanglement, an essential feature of quantum theory that allows for inseparable quantum correlations to be shared between distant parties, is a crucial resource for quantum networks. Of particular importance is the ability to distribute entanglement between remote objects that can also serve as quantum memories. This has been previously realized using systems such as warm and cold atomic vapours, individual atoms and ions, and defects in solid-state systems. Practical communication applications require a combination of several advantageous features, such as a particular operating wavelength, …
Nano- and micromechanical solid-state quantum devices have become a focus of attention. Reliably generating nonclassical states of their motion is of interest both for addressing fundamental questions about macroscopic quantum phenomena and for developing quantum technologies in the domains of sensing and transduction. We used quantum optical control techniques to conditionally generate single-phonon Fock states of a nanomechanical resonator. We performed a Hanbury Brown and Twiss-type experiment that verified the nonclassical nature of the phonon state without requiring full state reconstruct…
When a gain system is coupled to a loss system, the energy usually flows from the gain system to the loss one. We here present a counterintuitive theory for the ground-state cooling of the mechanical resonator in optomechanical system via a gain cavity. The energy flows first from the mechanical resonator into the loss cavity, then into the gain cavity, and finally localizes there. The energy localization in the gain cavity dramatically enhances the cooling rate of the mechanical resonator. Moreover, we show that unconventional optical spring effect, e.g., giant frequency shift and optically i…
We propose to realize the ground state cooling of magnomechanical resonator in a parity-time (PT)-symmetric cavity magnomechanical system composed of a loss ferromagnetic sphere and a gain microwave cavity. In the scheme, the magnomechanical resonator can be cooled close to its ground state via the magnomechanical interaction, and it is found that the cooling effect in PT-symmetric system is much higher than that in non-PT-symmetric system. Resorting to the magnetic force noise spectrum, we investigate the final mean phonon number with experimentally feasible parameters and find surprisingly t…
We present the generation of continuous-wave optical squeezing from a titanium-indiffused lithium niobate waveguide resonator. We directly measure 2.9\pm 0.1 dB of single-mode squeezing, which equates to a produced level of 4.9\pm 0.1 dB after accounting for detection losses. This device showcases the current capabilities of this waveguide architecture and precipitates more complicated integrated continuous-wave quantum devices in the continuous-variable regime.
Quantum manipulation of coupled mechanical resonators has become an important research topic in optomechanics because these systems can be used to study the quantum coherence effects involving multiple mechanical modes. A prerequisite for observing macroscopic mechanical coherence is to cool the mechanical resonators to their ground state. Here we propose a theoretical scheme to cool two coupled mechanical resonators by introducing an optomechanical interface. The final mean phonon numbers in the two mechanical resonators are calculated exactly and the results show that the ground-state coolin…
We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling rate not only exceeds the dissipation rates in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical interaction induces a frequency splitting between the hybridized normal modes that reaches 88% of the bare mechanical frequency, limited by the fundamental parametric instability. The coupling also exceeds…
