We calculate explicitly the space dependence of the radiative relaxation rates and associated level shifts for a dipole placed in the vicinity of the center of a spherical cavity with a large numerical aperture and a relatively low finesse. In particular, we give simple and useful analytic formulas for these quantities, that can be used with arbitrary mirrors transmissions. The vacuum field in the vicinity of the center of the cavity is actually equivalent to the one obtained in a microcavity, and this scheme allows one to predict significant cavity QED effects.
We consider the situation where a two-level atom is placed in the vicinity of the center of a spherical cavity with a large numerical aperture. The vacuum field at the center of the cavity is actually equivalent to the one obtained in a microcavity, and both the dissipative and the reactive parts of the atom's spontaneous emission are significantly modified. Using an explicit calculation of the spatial dependence of the radiative relaxation rate and of the associated level shift, we show that for a weakly excitating light field, the atom can be attracted to the center of the cavity by vacuum-i…
Quantum manipulation of mechanical resonators has been widely applied in fundamental physics and quantum information processing. Among them, cooling the mechanical system to its quantum ground state is regarded as a key step. In this work, we propose a scheme which one can realize ground-state cooling of resonator in a cavity magnomechanical system. The system consists of a microwave cavity and a small ferromagnetic sphere, in which phonon-magnon coupling and cavity photon-magnon coupling can be achieved via magnetostrictive interaction and magnetic dipole interaction, respectively. After adia…
We propose a domino-cooling method to realize simultaneous ground-state cooling of a coupled mechanical-resonator chain through an optomechanical cavity working in the unresolved-sideband regime. This domino-effect cooling is realized by combining the cold-damping feedback on the first mechanical resonator with nearest-neighbor couplings between other neighboring mechanical resonators. We obtain analytical results for the effective susceptibilities, noise spectra, final mean phonon numbers, and cooling rates of these mechanical resonators, and find the optimal-cooling condition for these reson…
We consider a quantum model of a nanomechanical flexing beam resonator interacting with a bath comprising a few damped tunneling two level systems (TLS's). In contrast with a resonator interacting bilinearly with an ohmic free oscillator bath (modeling clamping loss, for example), the mechanical resonator damping is amplitude dependent, while the decoherence of quantum superpositions of mechanical position states depends only weakly on their spatial separation.
We theoretically propose a scheme for the generation of a non-classical single-mode motional state of a mechanical resonator (MR) in the three-mode optomechanical systems, in which two optical modes of the cavities are linearly coupled to each other and one mechanical mode of the MR is optomechanically coupled to the two optical modes with the same coupling strength simultaneously. One cavity is driven by a coherent laser light. By properly tuning the frequency of the weak driving field, we obtain engineered Liouvillian superoperator via engineering the selective interaction Hamiltonian confin…
We numerically investigate the decay of initial quantum Fock states and their superpositions for a mechanical resonator mode coupled to an environment comprising interacting, damped tunneling two level system (TLS) defects. The cases of one, three, and six near resonant, interacting TLS's are considered in turn and it is found that the resonator displays Ohmic bath like decay behavior with as few as three TLS's.
Dissipation-driven quantum state engineering uses the environment to steer the state of quantum systems and preserve quantum coherence in the steady state. We show that modulating the damping rate of a microwave resonator generates a vacuum squeezed state of arbitrary squeezing strength, thereby constituting a mechanism allowing perfect squeezing. Given the recent experimental realizations in circuit QED of a microwave resonator with a tunable damping rate [Yin et al., Phys. Rev. Lett. 110, 107001 (2013)], superconducting circuits are an ideal playground to implement this technique. By dispers…
We investigate the action of time dependent detunings upon the excitation inversion of a Cooper pair box interacting with a nanomechanical resonator. The method employs the Jaynes-Cummings model with damping, assuming different decay rates of the Cooper pair box and various fixed and t-dependent detunings. It is shown that while the presence of damping plus constant detunings destroy the collapse/revival effects, convenient choices of time dependent detunings allow one to reconstruct such events in a perfect way. It is also shown that the mean excitation of the nanomechanical resonator is more…
We formulate a model for the steady state response of a nonlinear quantum oscillator structure, such as those used in a variety of superconducting qubit experiments, when excited by a steady, but not necessarily small, ac tone. We show that this model can be derived directly from a circuit description of some recent qubit experiments in which the state of the qubit is read out directly, without a SQUID magnetometer. The excitation profile has a rich structure depending on the detuning of the tone from the small-signal resonant frequency, on the degree of damping, and on the excitation amplitud…
We provide a fully analytical treatment for the partial refrigeration of the thermal motion of a quantum mechanical resonator under the action of feedback. As opposed to standard cavity optomechanics where the aim is to isolate and cool a single mechanical mode, the aim here is to extract the thermal energy from many vibrational modes within a large frequency bandwidth. We consider a standard cold-damping technique where homodyne read-out of the cavity output field is fed into a feedback loop that provides a cooling action directly applied on the mechanical resonator. Analytical and numerical …
We study cooling performance of a realistic mechanical resonator containing defects. The normal cooling method through an optomechanical system does not work efficiently due to those defects. We show by employing periodical $σ_z$ pulses, we can eliminate the interaction between defects and their surrounded heat baths up to the first order of time. Compared with the cooling performance of no $σ_z$ pulses case, much better cooling results are obtained. Moreover, this pulse sequence has an ability to improve the cooling performance of the resonator with different defects energy gaps and different…
Nanomechanical resonators have demonstrated great potential for use as versatile tools in a number of emerging quantum technologies. For such applications, the performance of these systems is restricted by the decoherence of their fragile quantum states, necessitating a thorough understanding of their dissipative coupling to the surrounding environment. In bulk amorphous solids, these dissipation channels are dominated at low temperatures by parasitic coupling to intrinsic two-level system (TLS) defects, however, there remains a disconnect between theory and experiment on how this damping mani…
We analyze the quantum evolution of a weakly nonlinear resonator due to a classical near-resonant drive and damping. The resonator nonlinearity leads to squeezing and heating of the resonator state. Using a hybrid phase-space--Fock-space representation for the resonator state within the Gaussian approximation, we derive evolution equations for the four parameters characterizing the Gaussian state. Numerical solution of these four ordinary differential equations is much simpler and faster than simulation of the full density matrix evolution, while providing good accuracy for the system analysis…
We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active rese…
We report the experimental demonstration of optomechanical light storage in a silica resonator. We use writing and readout laser pulses tuned to one mechanical frequency below an optical cavity resonance to control the coupling between the mechanical displacement and the optical field at the cavity resonance. The writing pulse maps a signal pulse at the cavity resonance to a mechanical excitation. The readout pulse later converts the mechanical excitation back to an optical pulse. The light storage lifetime is determined by the relatively long damping time of the mechanical excitation.
We consider a cavity optomechanical cooling configuration consisting of a mechanical resonator (denoted as resonator b) and an electromagnetic resonator (denoted as resonator a), which are coupled in such a way that the effective resonance frequency of resonator a depends linearly on the displacement of resonator b. We study whether back-reaction effects in such a configuration can be efficiently employed for suppression of decoherence. To that end, we consider the case where the mechanical resonator is prepared in a superposition of two coherent states and evaluate the rate of decoherence. We…
When a gain system is coupled to a loss system, the energy usually flows from the gain system to the loss one. We here present a counterintuitive theory for the ground-state cooling of the mechanical resonator in optomechanical system via a gain cavity. The energy flows first from the mechanical resonator into the loss cavity, then into the gain cavity, and finally localizes there. The energy localization in the gain cavity dramatically enhances the cooling rate of the mechanical resonator. Moreover, we show that unconventional optical spring effect, e.g., giant frequency shift and optically i…
Micro- and nanoscale mechanical resonators have recently emerged as ubiquitous devices for use in advanced technological applications, for example in mobile communications and inertial sensors, and as novel tools for fundamental scientific endeavors. Their performance is in many cases limited by the deleterious effects of mechanical damping. Here, we report a significant advancement towards understanding and controlling support-induced losses in generic mechanical resonators. We begin by introducing an efficient numerical solver, based on the "phonon-tunneling" approach, capable of predicting …
We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following main properties: (i) the direct-current (dc) bias voltage of the junction can change the QCR-induced damping rate of a superconducting microwave resonator by orders of magnitude and give rise to non-tri…
We have developed a scalable method for coupling single color centers in diamond to plasmonic resonators and demonstrated Purcell enhancement of the single photon emission rate of nitrogen-vacancy (NV) centers. Our structures consist of single nitrogen-vacancy (NV) center-containing diamond nanoposts embedded in a thin silver film. We have utilized the strong plasmon resonances in the diamond-silver apertures to enhance the spontaneous emission of the enclosed dipole. The devices were realized by a combination of ion implantation and top-down nanofabrication techniques, which have enabled dete…
We investigate theoretically the influence of laser phase noise on the cooling and heating of a generic cavity optomechanical system. We derive the back-action damping and heating rates and the mechanical frequency shift of the radiation pressure-driven oscillating mirror, and derive the minimum phonon occupation number for small laser linewidths. We find that in practice laser phase noise does not pose serious limitations to ground state cooling. We then consider the effects of laser phase noise in a parametric cavity driving scheme that minimizes the back-action heating of one of the quadrat…
We study nonlinear response of a ferrimagnetic sphere resonator (FSR) strongly coupled to a microwave loop gap resonator (LGR). The measured response in the regime of weak nonlinearity allows the extraction of the FSR Kerr coefficient and its cubic damping rate. We find that there is a certain range of driving parameters in which the system exhibits instability. In that range, self-sustained modulation of the reflected power off the system is generated. The instability is attributed to absorption-induced heating of the FSR above its Curie temperature.
We propose and optimize a vertically-loaded diamond microdisk resonator (VLDMoRt) coupled to a nitrogen-vacancy (NV) center in diamond for efficient collection of zero-phonon-line emission into low numerical aperture ($\text{NA}$) free-space modes. The VLDMoRt achieves a Purcell enhancement of 172 with $39\%$ of the emitted light collected within a $\text{NA}$ of 0.6, leading to a total external spin-photon collection efficiency of 0.33. As the design is compatible with established nanofabrication techniques and couples to low-NA modes accessible by cryogenic free-space optical systems, it is …
Cavity cooling via quantum backaction force can extract thermal fluctuations from a mechanical resonator to reach the quantum ground state. Surface or bulk two-level-system (TLS) defects in a mechanical resonator can couple with the mechanical mode via deformation potential and affect the cooling process significantly. Here, we develop a theory to study the cavity cooling of a mechanical mode in the presence of a TLS defect using the adiabatic elimination technique. Our result shows that the cooling process depends strongly on the resonance and the damping rate of the TLS.
We describe a cavity QED analogue for the coupling system of a spin and a nanomechanical resonator with a magnetic tip. For the quantized nanomechanical resonator, a spin-boson model for this coupling system can refer to a Jaynes-Cummings(JC) or an anti-JC model. These observations predict some quantum optical phenomena, such as squeezing and "collapse-revival" in the single oscillation mode of the nanomechanical resonator when it is initially prepared in the quasi-classical state. By modulating the phase of RF magnetic field one can switch the system between the JC and anti-JC model, which pr…
We investigate the noise properties of a superconducting single electron transistor (SSET) coupled to an harmonically driven resonator. Using a Langevin equation approach, we calculate the frequency spectrum of the SSET charge and calculate its effect on the resonator field. We find that the heights of the peaks in the frequency spectra depend sensitively on the amplitude of the resonator oscillation and hence suggest that the heights of these peaks could act as a sensitive signal for detecting the small changes in the amplitude of the drive. The previously known results for the effective ampl…
We propose a novel source of non-classical light consisting of plasmonic aperture with single-crystal diamond containing a single Nitrogen-Vacancy (NV) color center. Theoretical calculations of optimal structures show that these devices can simultaneously enhance optical pumping by a factor of 7, spontaneous emission rates by Fp ~ 50 (Purcell factor), and offer collection efficiencies up to 40%. These excitation and collection enhancements occur over a broad range of wavelengths (~30nm), and are independently tunable with device geometry, across the excitation (~530nm) and emission (~600-800nm…
We study a resonator coupled to a generic detector and calculate the noise spectra of the two sub-systems. We describe the coupled system by a closed, linear, set of Langevin equations and derive a general form for the finite frequency noise of both the resonator and the detector. The resonator spectrum is the well-known thermal form with an effective damping, frequency shift and diffusion term. In contrast, the detector noise shows a rather striking Fano-like resonance, i.e. there is a resonance at the renormalized frequency, and an anti-resonance at the bare resonator frequency. As examples …
Coupled electromechanical resonators that can be independently driven/detected and easily integrated with external circuits are essential for exploring mechanical modes based signal processing. Here, we present a room temperature phonon-cavity electromechanical system, consisting of two distinct resonators: a silicon nitride electromechanical drum capacitively coupled to an aluminum one. We demonstrate electromechanically induced transparency and amplification in a two-tone driving scheme and observe the phonon-cavity force affecting the mechanical damping rates of both movable objects. We als…
We study the response of a magnetic-field-driven superconducting qubit strongly coupled to a superconducting coplanar waveguide resonator. We observed a strong amplification/damping of a probing signal at different resonance points corresponding to a one and two-photon emission/absorption. The sign of the detuning between the qubit frequency and the probe determines whether amplification or damping is observed. The larger blue detuned driving leads to two-photon lasing while the larger red detuning cools the resonator. Our experimental results are in good agreement with the theoretical model o…
We theoretically study photon transmission and mechanical ground state cooling in a two-dimensional optomechanical system that is formed of a suspended graphene sheet on an one-dimensional optomechanical crystal. When the frequencies of graphene resonator and nanobeam resonator(phononic mode of optomechanical crystal) are approximately the same, the $Λ$-type degenerate four-level system of two-dimensional optomechanics shows two-color optomechanically-induced transparency , and the transparency window could be switched among probe signal's absorption, transparency, and amplification. According…
Using pulsed optical excitation and read-out along with single phonon counting techniques, we measure the transient back-action, heating, and damping dynamics of a nanoscale silicon optomechanical crystal cavity mounted in a dilution refrigerator at a base temperature of 11mK. In addition to observing a slow (~740ns) turn-on time for the optical-absorption-induced hot phonon bath, we measure for the 5.6GHz `breathing' acoustic mode of the cavity an initial phonon occupancy as low as 0.021 +- 0.007 (mode temperature = 70mK) and an intrinsic mechanical decay rate of 328 +- 14 Hz (mechanical Q-fa…
