The accuracy of channel state information (CSI) is critical for improving the capacity of wireless networks. In this paper, we introduce a training protocol for wireless relay networks that uses channel estimation and feedforwarding methods. The feedforwarding method is the distinctive feature of the proposed protocol. As we show, each relay feedforwards the imperfect CSI to the destination in a way that provides a higher network capacity and a faster transfer of the CSI than the existing protocols. In addition, we show the importance of the effective CSI accuracy on the wireless relay network capacity by comparing networks with the perfect effective CSI, imperfect effective CSI, and noisy imperfect effective CSI available at the destination.
Processing of multiple communication flows in wireless systems has given rise to a number of novel transmission techniques, notably the two-way relaying based on wireless network coding. Recently, a related set of techniques has emerged, termed coordinated direct and relay (CDR) transmissions, where the constellation of traffic flows is more general than the two-way. Regardless of the actual traffic flows, in a CDR scheme the relay has a central role in managing the interference and boosting the overall system performance. In this paper we investigate the novel transmission modes, based on amp…
Network coding has the potential to improve the overall throughput of a network by combining different streams of data and forwarding them. In wireless networks, the wireless channel provide an excellent medium for physical layer network coding as signals from different transmitters are combined automatically by the wireless channel. In such scenarios, it would be interesting to investigate protocols and algorithms which can optimally relay information. In this paper, we look at a four-node two-way or bidirectional relay network, and propose a relay protocol which can relay information efficie…
In this work, we consider the use of buffer-aided relays, linear precoding techniques and multiple antennas for physical-layer security in wireless networks. We develop relay selection algorithms to improve the secrecy-rate performance of cooperative multi-user multiple-antenna wireless networks. In particular, we propose a novel finite buffer-aided relay selection algorithm that employs the maximum likelihood (ML) criterion to select sets of relays which fully exploit the flexibility offered by relay nodes equipped with buffers. Numerical results show the benefits of the proposed techniques a…
In this paper, we consider simultaneous wireless information and power transfer (SWIPT) in multi-relay assisted two-hop relay system, where multiple relay nodes simultaneously assist the transmission from source to destination using the concept of distributed space-time coding. Each relay applies power splitting protocol to coordinate the received signal energy for information decoding and energy harvesting. The optimization problems of power splitting ratios at the relays are formulated for both decode-and-forward (DF) and amplify-and-forward (AF) relaying protocols. Efficient algorithms are …
Due to the broadcast nature of wireless medium, wireless communication is extremely vulnerable to eavesdropping attack. Physical-layer security is emerging as a new paradigm to prevent the eavesdropper from interception by exploiting the physical characteristics of wireless channels, which has recently attracted a lot of research attentions. In this paper, we consider the physical-layer security in cooperative wireless networks with multiple decode-and-forward (DF) relays and investigate the best relay selection in the presence of eavesdropping attack. For the comparison purpose, we also exami…
A novel channel representation for a two-hop decentralized wireless relay network (DWRN) is proposed, where the relays operate in a completely distributive fashion. The modeling paradigm applies an analogous approach to the description method for a double-directional multipath propagation channel, and takes into account the finite system spatial resolution and the extended relay listening/transmitting time. Specifically, the double-directional information azimuth spectrum (IAS) is formulated to provide a compact representation of information flows in a DWRN. The proposed channel representation…
We investigate transmission energy minimization via optimizing wireless relay selection in orthogonal-frequency-division multiple access (OFDMA) networks. We take into account the impact of the load of cells on transmission energy. We prove the NP-hardness of the energy-aware wireless relay selection problem. To tackle the computational complexity, a partial optimality condition is derived for providing insights in respect of designing an effective and efficient algorithm. Numerical results show that the resulting algorithm achieves high energy performance.
This paper investigates the outage probability and the throughput of relay networks with wireless information and energy transfer where the relays harvest energy from the transmitted radio-frequency signal of the source. Considering different power consumption models, we derive the outage probability for both adaptive and non-adaptive power allocations at the relay. With a total energy consumption constraint at the source, we provide closed-form expressions for the optimal time sharing and power allocation between the source energy and information transfer signals as well as the optimal relay …
For wireless networks with multiple sources, an omnidirectional relay scheme is developed, where each node can simultaneously relay different messages in different directions. This is accomplished by the decode-and-forward relay strategy, with each relay binning the multiple messages to be transmitted, in the same spirit of network coding. Specially for the all-source all-cast problem, where each node is an independent source to be transmitted to all the other nodes, this scheme completely eliminates interference in the whole network, and the signal transmitted by any node can be used by any o…
This paper deals with distributed beamforming techniques for wireless networks with half-duplex amplify-and-forward relays. Existing schemes optimize the beamforming weights based on the assumption that channel state information (CSI) is available at the relays. We propose to use adaptive beamforming based on deterministic perturbations and limited feedback (1-bit) from the destination to the relays in order to avoid CSI at the relays. Two scalable perturbation schemes are considered and practical implementation aspects are addressed. Simulation results confirm that the proposed techniques clo…
In this paper, we consider a two-way or bidirectional communications system with a relay equipped with multiple antennas. We show that when the downlink channel state information is not known at the relay, the benefit of having additional antennas at the relay can only be obtained by using decode and forward (DF) but not amplify and forward (AF). The gain becomes significant when we employ transmit diversity together with wireless network coding. We also demonstrate how the performance of such system can be improved by performing antenna selection at the relay. Our results show that if downlin…
This paper studies secrecy transmission with the aid of a group of wireless energy harvesting (WEH)-enabled amplify-and-forward (AF) relays performing cooperative jamming (CJ) and relaying. The source node in the network does simultaneous wireless information and power transfer (SWIPT) with each relay employing a power splitting (PS) receiver in the first phase; each relay further divides its harvested power for forwarding the received signal and generating artificial noise (AN) for jamming the eavesdroppers in the second transmission phase. In the centralized case with global channel state in…
This study investigates wireless information and energy transfer for dual-hop amplify-and-forward full-duplex relaying systems. By forming energy efficiency (EE) maximization problem into a concave fractional program of transmission power, three relay control schemes are separately designed to enable energy harvesting and full-duplex information relaying. With Rician fading modeled residual self-interference channel, analytical expressions of outage probability and ergodic capacity are presented for the maximum relay, signal-to-interference-plus-noise-ratio (SINR) relay, and target relay. It h…
Two-way relaying can significantly improve performance of next generation wireless networks. However, due to its dependence on multi-node cooperation and transmission coordination, applying this technique to a wireless network in an effective and scalable manner poses a challenging problem. To tackle this problem without relying on complicated scheduling or network optimization algorithms, we propose a scalable random access scheme that takes measures in both the physical layer and the medium access control layer. Specifically, we propose a two-way relaying technique that supports fully asynch…
This paper studies the outage probability minimization problem for a multiple relay network with energy harvesting constraints. The relays are hybrid nodes used for simultaneous wireless information and power transfer from the source radio frequency (RF) signals. There is a trade-off associated with the amount of time a relay node is used for energy and information transfer. Large intervals of information transfer implies little time for energy harvesting from RF signals and thus, high probability of outage events. We propose relay selection schemes for a cooperative system with a fixed number…
With growing popularity of mobile Internet, providing secure wireless services has become a critical issue. Physical layer security (PHY-security) has been recognized as an effective means to enhance wireless security by exploiting wireless medium characteristics, e.g., fading, noise, and interference. A particularly interesting PHY-security technology is cooperative relay due to the fact that it helps to provide distributed diversity and shorten access distance. This article offers a tutorial on various multi-antenna relaying technologies to improve security at physical layer. The state of th…
This paper investigates relaying schemes in an amplify-and-forward multiple-input multiple-output relay network, where an energy-constrained relay harvests wireless power from the source information flow and can be further aided by an energy flow (EF) in the form of a wireless power transfer at the destination. However, the joint optimization of the relay matrix and the source precoder for the energy-flow-assisted (EFA) and the non-EFA (NEFA) schemes is intractable. The original rate maximization problem is transformed into an equivalent weighted mean square error minimization problem and opti…
This paper investigates a wireless-powered cooperative communication network consisting of a source, a destination and a multi-antenna decode-and-forward relay. We consider the relay as a wireless-powered node that has no external power supply; but it is equipped with an energy harvesting (EH) unit and a rechargeable battery such that it can harvest and accumulate energy from radio-frequency signals broadcast by the source. By fully incorporating the EH feature of the relay, we develop an opportunistic relaying protocol, termed accumulate-then-forward (ATF), for the considered WPCCN. We then a…
This paper studies the general multi-antenna multiple-relay network. Every two nodes of the network are either connected together through a Rayleigh fading channel or disconnected. We study the ergodic capacity of the network in the high SNR regime. We prove that the traditional amplify-forward relaying achieves the maximum multiplexing gain of the network. Furthermore, we show that the maximum multiplexing gain of the network is equal to the minimum vertex cut-set of the underlying graph of the network, which can be computed in polynomial time in terms of the number of network nodes. Finally,…
Harvesting energy from the radio-frequency (RF) signal is an exciting solution to replenish energy in energy-constrained wireless networks. In this paper, an amplify-and-forward (AF) based wireless relay network is considered, where the relay nodes need to harvest energy from the source's RF signal to forward information to the destination. To improve the performance of information transmission, we propose two distributed relay selection protocols, Maximum Harvested Energy (MHE) protocol and Maximum Signal-to-Noise Ratio (MSNR) protocol. Then, we derive the outage probabilities of the system w…
Wireless information surveillance, by which suspicious wireless communications are closely monitored by legitimate agencies, is an integral part of national security. To enhance the information surveillance capability, we propose in this paper a new proactive eavesdropping approach via a spoofing relay, where the legitimate monitor operates in a full-duplex manner with simultaneous eavesdropping and spoofing relaying to vary the source transmission rate in favor of the eavesdropping performance. To this end, a power splitting receiver is proposed, where the signal received at each antenna of t…
Non-orthogonal multiple access (NOMA) and the cooperative relaying systems are two of the promising techniques to meet requirements of future wireless networks such as high spectral efficiency and wide coverage area. On the other hand, the energy efficiency has also high priority in the applications with limited energy such as sensor networks and/or internet of things (IoTs). To this end, in this paper, we propose wireless powered cooperative relaying system with NOMA thereby increasing spectral and energy efficiency. We consider three different energy harvesting (EH) protocols (i.e., power sh…
Wireless receiver design is critical to the overall system performance. In this work, we apply the techniques of mixed-integer programming to formulate a unified receiver in relay networks with only partial channel information. We also relax all the constraints into real field to save computations, but at the cost of bit error performance. Moreover, a receiver formulation with adaptive number of constraints is proposed using the cutting plane techniques. Last but not least, number of flops is investigated for different formulations.
The paper studies the scenario of wireless multicast with a single transmitter and a relay that deliver scalable source symbols to the receivers in a decode-and-forward (DF) fashion. With the end-to-end mean square error distortion (EED) as performance metric, we firstly derive the EED expression for the $L$-resolution scalable source symbol for any receiver. An optimization problem in minimizing the weighted EED is then formulated for finding the power allocations for all resolution layers at the transmitter and the relay. Due to nonlinearity of the formulations, we solve the formulated optim…
This letter studies a wireless-powered amplify-and-forward relaying system, where an energy-constrained relay node assists the information transmission from the source to the destination using the energy harvested from the source. We propose a novel two-phase protocol for efficient energy transfer and information relaying, in which the relay operates in full-duplex mode with simultaneous energy harvesting and information transmission. Compared with the existing protocols, the proposed design possesses two main advantages: i) it ensures uninterrupted information transmission since no time switc…
This paper investigates a three-node amplify-and-forward (AF) multiple-input multiple-output (MIMO) relay network, where an autonomous relay harvests power from the source information flow and is further helped by an energy flow in the form of a wireless power transfer (WPT) at the destination. An energy-flow-assisted two-phase relaying scheme is proposed, where a source and relay joint optimization is formulated to maximize the rate. By diagonalizing the channel, the problem is simplified to a power optimization, where a relay channel pairing problem is solved by an ordering operation. The pr…
In a bi-directional relay channel, two nodes wish to exchange independent messages over a shared wireless half-duplex channel with the help of relays. Recent work has considered information theoretic limits of the bi-directional relay channel with a single relay. In this work we consider bi-directional relaying with multiple relays. We derive achievable rate regions and outer bounds for half-duplex protocols with multiple decode and forward relays and compare these to the same protocols with amplify and forward relays in an additive white Gaussian noise channel. We consider three novel classes…
Considering a three-node multiple antenna relay system, this paper proposes a two-phase amplify-and-forward (AF) relaying protocol, which enables the autonomous relay to simultaneously harvest wireless power from the source information signal and from an energy signal conveyed by the destination. We first study this energy-flow-assisted (EFA) relaying in a single-input single-output (SISO) relay system and aim at maximizing the rate. By transforming the optimization problem into an equivalent convex form, a global optimum can be found. We then extend the protocol to a multiple antenna relay sy…
The various wireless networks have made the ambient radio frequency signals around the world. Wireless information and power transfer enables the devices to recycle energy from these ambient radio frequency signals and process information simultaneously. In this paper, we develop a wireless information and power transfer protocol in two-way amplify-and-forward relaying channels, where two sources exchange information via an energy harvesting relay node. The relay node collects energy from the received signals and uses it to provide the transmission power to forward the received signals. We ana…
In this work, we maximize the secrecy rate of the wireless-powered untrusted relay network by jointly designing power splitting (PS) ratio and relay beamforming with the proposed global optimal algorithm (GOA) and local optimal algorithm (LOA). Different from the literature, artificial noise (AN) sent by the destination not only degrades the channel condition of the eavesdropper to improve the secrecy rate, but also becomes a new source of energy powering the untrusted relay based on PS. Hence, it is of high economic benefits and efficiency to take advantage of AN compared with the literature.…
Distributed space-time block coding is a diversity technique to mitigate the effects of fading in multi-hop wireless networks, where multiple relay stages are used by a source to communicate with its destination. This paper proposes a new distributed space-time block code called the cascaded orthogonal space-time block code (COSTBC) for the case where the source and destination are equipped with multiple antennas and each relay stage has one or more single antenna relays. Each relay stage is assumed to have receive channel state information (CSI) for all the channels from the source to itself,…
In this paper, we explore the physical-layer security in cooperative wireless networks with multiple relays where both amplify-and-forward (AF) and decode-and-forward (DF) protocols are considered. We propose the AF and DF based optimal relay selection (i.e., AFbORS and DFbORS) schemes to improve the wireless security against eavesdropping attack. For the purpose of comparison, we examine the traditional AFbORS and DFbORS schemes, denoted by T-AFbORS and TDFbORS, respectively. We also investigate a so-called multiple relay combining (MRC) framework and present the traditional AF and DF based M…
A general class of wireless relay networks with a single source-destination pair is considered. Intermediate nodes in the network employ an amplify-and-forward scheme to relay their input signals. In this case the overall input-output channel from the source via the relays to the destination effectively behaves as an intersymbol interference channel with colored noise. Unlike previous work we formulate the problem of the maximum achievable rate in this setting as an optimization problem with no assumption on the network size, topology, and received signal-to-noise ratio. Previous work consider…
As a basic information-theoretic model for fading relay channels, the parallel relay channel is first studied, for which lower and upper bounds on the capacity are derived. For the parallel relay channel with degraded subchannels, the capacity is established, and is further demonstrated via the Gaussian case, for which the synchronized and asynchronized capacities are obtained. The capacity achieving power allocation at the source and relay nodes among the subchannels is characterized. The fading relay channel is then studied, for which resource allocations that maximize the achievable rates a…
This work proposes an analytical framework to study how relay selection strategies perform in half- and full-duplex deployments by combining renewal theory and stochastic geometry. Specifically, we assume that the network nodes -- operating in either half- or full-duplex mode -- are scattered according to a two-dimensional homogeneous Poisson point process to compute the relay selection cost by using a semi-Markov process. Our results show: ($i$) fixed relay outperforms the reactive option in either cases, ($ii$) the performance of both reactive and fixed relay strategies depends on the self-i…
Recent technological advances in wireless communications offer new opportunities and challenges for relay network.To enhance system performance, Demodulate-Network Coding (Dm-NC) scheme has been examined at relay node; it works directly to De-map the received signals and after that forward the mixture to the destination. Simulation analysis has been proven that the performance of Dm-NC has superiority over analog-NC. In addition, the Quantize-Decode-NC scheme (QDF-NC) has been introduced. The presented simulation results clearly provide that the QDF-NC perform better than analog-NC. The toggle…
In this paper, a two-hop decode-and-forward cognitive radio system with deployed interference alignment is considered. The relay node is energy-constrained and scavenges the energy from the interference signals. In the literature, there are two main energy harvesting protocols, namely, time-switching relaying and power-splitting relaying. We first demonstrate how to design the beamforming matrices for the considered primary and secondary networks. Then, the system capacity under perfect and imperfect channel state information scenarios, considering different portions of time-switching and powe…
In this paper, we address the problem of secure wireless information and power transfer in a large-scale multiple-input multiple-output (LS-MIMO) amplify-and-forward (AF) relaying system. The advantage of LS-MIMO relay is exploited to enhance wireless security, transmission rate and energy efficiency. In particular, the challenging issues incurred by short interception distance and long transfer distance are well addressed simultaneously. Under very practical assumptions, i.e., no eavesdropper's channel state information (CSI) and imperfect legitimate channel CSI, this paper investigates the i…
An emerging solution for prolonging the lifetime of energy constrained relay nodes in wireless networks is to avail the ambient radio-frequency (RF) signal and to simultaneously harvest energy and process information. In this paper, an amplify-and-forward (AF) relaying network is considered, where an energy constrained relay node harvests energy from the received RF signal and uses that harvested energy to forward the source information to the destination. Based on the time switching and power splitting receiver architectures, two relaying protocols, namely, i) time switching-based relaying (T…
This paper considers the problem of selecting a subset of nodes in a two-hop wireless network to act as relays in aiding the communication between the source-destination pair. Optimal relay subset selection with the objective of maximizing the overall throughput is a difficult problem that depends on multiple factors including node locations, queue lengths and power consumption. A partial decode-and-forward strategy is applied in this paper to improve the tractability of the relay selection problem and performance of the overall network. Note that the number of relays selected ultimately deter…
Covert communication aims to shield the very existence of wireless transmissions in order to guarantee a strong security in wireless networks. In this work, for the first time we examine the possibility and achievable performance of covert communication in one-way relay networks. Specifically, the relay opportunistically transmits its own information to the destination covertly on top of forwarding the source's message, while the source tries to detect this covert transmission to discover the illegitimate usage of the recourse (e.g., power, spectrum) allocated only for the purpose of forwardin…
The hybrid relay selection (HRS) scheme, which adaptively chooses amplify-and-forward (AF) and decode-and-forward (DF) protocols, is very effective to achieve robust performance in wireless networks. This paper analyzes the frame error rate (FER) of the HRS scheme in general cooperative wireless networks without and with utilizing error control coding at the source node. We first develop an improved signal-to-noise ratio (SNR) threshold-based FER approximation model. Then, we derive an analytical average FER expression as well as an asymptotic expression at high SNR for the HRS scheme and gene…
The deterministic channel model for wireless relay networks proposed by Avestimehr, Diggavi and Tse `07 has captured the broadcast and inference nature of wireless communications and has been widely used in approximating the capacity of wireless relay networks. The authors generalized the max-flow min-cut theorem to the linear deterministic wireless relay networks and characterized the unicast capacity of such deterministic network as the minimum rank of all the binary adjacency matrices describing source-destination cuts whose number grows exponentially with the size of the network. In this p…
In this paper, we consider a wireless powered multi-relay network in which a multi-antenna hybrid access point underlaying a cellular system transmits information to distant receivers. Multiple relays capable of energy harvesting are deployed in the network to assist the information transmission. The hybrid access point can wirelessly supply energy to the relays, achieving multi-user gains from signal and energy cooperation. We propose a joint optimization for signal beamforming of the hybrid access point as well as wireless energy harvesting and collaborative beamforming strategies of the rel…
The differential encoding/decoding setup introduced by Kiran et al, Oggier et al and Jing et al for wireless relay networks that use codebooks consisting of unitary matrices is extended to allow codebooks consisting of scaled unitary matrices. For such codebooks to be used in the Jing-Hassibi protocol for cooperative diversity, the conditions that need to be satisfied by the relay matrices and the codebook are identified. A class of previously known rate one, full diversity, four-group encodable and four-group decodable Differential Space-Time Codes (DSTCs) is proposed for use as Distributed D…
In this paper, we analyze the performance of cooperative transmissions in wireless ad hoc networks with random node locations. According to a contention probability for message transmission, each source node can either transmits its own message signal or acts as a potential relay for others. Hence, each destination node can potentially receive two copies of the message signal, one from the direct link and the other from the relay link. Taking the random node locations and interference into account, we derive closed-form expressions for the outage probability with different combining schemes at…
In this work, we employ multiple energy harvesting relays to assist information transmission from a multi-antenna hybrid access point (HAP) to a receiver. All the relays are wirelessly powered by the HAP in the power-splitting (PS) protocol. We introduce the novel concept of hybrid relay communications, which allows each relay to switch between two radio modes, i.e., the active RF communications and the passive backscatter communications, according to its channel and energy conditions. We envision that the complement transmissions in two radio modes can be exploited to improve the overall rela…
The physical-layer security issue in the multiple non-regenerative wireless-powered relay (WPR) networks is investigated in this letter, where the idle relay is treated as a potential eavesdropper. To guarantee secure communication, the destination-based artificial noise is sent to degrade the receptions of eavesdroppers, and it also becomes a new source of energy powering relays to forward the information with power splitting (PS) technique. We propose an efficient algorithm ground on block-wise penalty function method to jointly optimize PS ratio and beamforming to maximize the secrecy rate.…
Wireless underground sensor networks (WUSNs) present a variety of new research challenges. Magnetic induction (MI) based transmission has been proposed to overcome the very harsh propagation conditions in underground communications in recent years. In this approach, induction coils are utilized as antennas in the sensor nodes. This solution achieves longer transmission ranges compared to the traditional electromagnetic (EM) waves based approach. Furthermore, a passive relaying technique has been proposed in the literature where additional resonant circuits are deployed between the nodes. Howev…
We consider a full-duplex decode-and-forward system, where the wirelessly powered relay employs the time-switching protocol to receive power from the source and then transmit information to the destination. It is assumed that the relay node is equipped with two sets of antennas to enable full-duplex communications. Three different interference mitigation schemes are studied, namely, 1) optimal 2) zero-forcing and 3) maximum ratio combining/maximum ratio transmission. We develop new outage probability expressions to investigate delay-constrained transmission throughput of these schemes. Our ana…
We consider a time-slotted two-hop wireless system in which the sources transmit to the relays in the even time slots (first hop) and the relays forward the packets to the destinations in the odd time slots (second hop). Each source may connect to multiple relays in the first hop. In the presence of interference and without tight coordination of the relays, it is not clear which relays should transmit the packet. We propose four decentralized methods of relay selection, some based on location information and others based on the received signal strength (RSS). We provide a complete analytical c…
In this paper, we consider a wireless-powered cooperative communication network, which consists of a hybrid access-point (AP), a hybrid relay, and an information source. In contrast to the conventional cooperative networks, the source in the considered network is assumed to have no embedded energy supply. Thus, it first needs to harvest energy from the signals broadcast by the AP and/or relay, which have constant power supply, in the downlink (DL) before transmitting the information to the AP in the uplink (UL). The hybrid relay can not only help to forward information in the UL but also charg…
In this paper, the application of wireless information and power transfer to cooperative networks is investigated, where the relays in the network are randomly located and based on the decode-forward strategy. For the scenario with one source-destination pair, three different strategies for using the available relays are studied, and their impact on the outage probability and diversity gain is characterized by applying stochastic geometry. By using the assumptions that the path loss exponent is two and that the relay-destination distances are much larger than the source-relay distances, closed…
In this paper, utilizing the relay buffers, we propose an opportunistic decode-wait-and-forward relay scheme for a point-to-point communication system with a half-duplexing relay network to better exploit the time diversity and relay mobility. For instance, we analyze the asymptotic throughput-delay tradeoffs in a dense relay network for two scenarios: (1) fixed relays with \textit{microscopic fading} channels (multipath channels), and (2) mobile relays with \textit{macroscopic fading} channels (path loss). In the first scenario, the proposed scheme can better exploit the \textit{multi-relay d…
This paper presents a decentralized relay selection protocol for a dense wireless network and describes channel feedback strategies that improve its performance. The proposed selection protocol supports hybrid automatic-repeat-request transmission where relays forward parity information to the destination in the event of a decoding error. Channel feedback is employed for refining the relay selection process and for selecting an appropriate transmission mode in a proposed adaptive modulation transmission framework. An approximation of the throughput of the proposed adaptive modulation strategy …
This paper investigates the system achievable rate and optimization for the multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) system with an energy harvesting (EH) relay. Firstly we propose a time switchingbased relaying (TSR) protocol to enable the simultaneous information processing and energy harvesting at the relay. Then, we discuss its achievable rate performance theoretically and formulated an optimization problem to maximize the system achievable rate. As the problem is difficult to solve, we design an Augmented Lagrangian Penalty Function (ALPF) me…
The design of modulation schemes for the physical layer network-coded three-way wireless relaying scenario is considered. The protocol employs two phases: Multiple Access (MA) phase and Broadcast (BC) phase with each phase utilizing one channel use. For the two-way relaying scenario, it was observed by Koike-Akino et al. \cite{KPT}, that adaptively changing the network coding map used at the relay according to the channel conditions greatly reduces the impact of multiple access interference which occurs at the relay during the MA phase and all these network coding maps should satisfy a require…
This paper investigates power splitting for full-duplex relay networks with wireless information and energy transfer. By applying power splitting as a relay transceiver architecture, the full duplex information relaying can be powered by energy harvested from the source-emitted radio frequency signal. In order to minimize outage probability, power splitting ratios have been dynamically optimized according to full channel state information (CSI) and partial CSI, respectively. Under strong loop interference, the proposed full CSI-based and partial CSI-based power splitting schemes achieve the be…
