We analyze the morphological stability against azimuthal, axial, and general helical perturbations for epitaxial core-shell nanowires in the growth regimes limited by either surface diffusion or evaporation-condensation surface kinetics. For both regimes, we find that geometric parameters (i.e., core radius and shell thickness) play a central role in determining whether the nanowire remains cylindrical or its shell breaks up into epitaxial islands similar to those observed during Stranski-Krastanow growth in thin epilayers. The combination of small cores and rapid growth of the shell emerge as key ingredients for stable shell growth. Our results provide an explanation for the different core-shell morphologies reported in the Si-Ge system experimentally, and also identify a growth-induced intrinsic mechanism for the formation of helical nanowires.
Epitaxial Ni/Cu Superlattice Nanowires with Atomically Sharp Interfaces for Spin Transport
Jožef Stefan Institute（约瑟夫·斯特凡研究所）；Max-Planck-Institut für Nachhaltige Materialien（马克斯·普朗克可持续材料研究所）；Institute of Nanoscience and Nanotechnology, Department of Physics, University of Kashan（卡尚大学物理系纳米科学与技术研究所）；Department of Medical Equipment Technology Engineering, Al-Hadba University（阿尔哈德巴大学医疗设备技术工程系）；Institut Jean Lamour – CNRS – Université de Lorraine（让·拉缪尔研究所 - 法国国家科学研究中心 - 洛林大学）；Institut Universitaire de France (IUF)（法兰西学院）；Jožef Stefan International Postgraduate School（约瑟夫·斯特凡国际研究生院）
The growth of Sn-rich group-IV semiconductors at the nanoscale provides new paths for understanding the fundamental properties of metastable GeSn alloys. Here, we demonstrate the effect of the growth conditions on the morphology and composition of Ge/GeSn core/shell nanowires by correlating the experimental observations with a theoretical interpretation based on a multi-scale approach. We show that the cross-sectional morphology of Ge/GeSn core/shell nanowires changes from hexagonal to dodecagonal upon increasing the supply of the Sn precursor. This transformation strongly influences the Sn di…
To advance fundamental understanding, and ultimate application, of transition-metal dichalcogenide (TMD) monolayers, it is essential to develop capabilities for the synthesis of high-quality single-layer samples. Molecular beam epitaxy (MBE), a leading technique for the fabrication of the highest-quality epitaxial films of conventional semiconductors has, however, typically yielded only small grain sizes and sub-optimal morphologies when applied to the van der Waals growth of monolayer TMDs. Here, we present a systematic study on the influence of adatom mobility, growth rate, and metal:chalcog…
Hybrid semiconductor/superconductor nanowires constitute a pervasive platform for studying gate-tunable superconductivity and the emergence of topological behavior. Their low-dimensionality and crystal structure flexibility facilitate novel heterostructure growth and efficient material optimization; crucial prerequisites for accurately constructing complex multi-component quantum materials. Here, we present an extensive optimization of Sn growth on InSb, InAsSb and InAs nanowires. We demonstrate how the growth conditions and the crystal structure/symmetry of the semiconductor drive the formati…
We investigate the growth of the graphene buffer layer and the involved step bunching behavior of the silicon carbide substrate surface using atomic force microscopy. The formation of local buffer layer domains are identified to be the origin of undesirably high step edges in excellent agreement with the predictions of a general model of step dynamics. The applied polymer-assisted sublimation growth method demonstrates that the key principle to suppress this behavior is the uniform nucleation of the buffer layer. In this way, the silicon carbide surface is stabilized such that ultra-flat surfa…
The addition of boron to GaAs nanowires grown by self-catalyzed molecular beam epitaxy was found to have a strong effect on the nanowire morphology, with axial growth greatly reduced as the nominal boron concentration was increased. Transmission electron microscopy measurements show that the Ga catalyst droplet was unintentionally consumed during growth. Concurrent radial growth, a rough surface morphology and tapering of nanowires grown under boron flux suggest that this droplet consumption is due to reduced Ga adatom diffusion on the nanowire sidewalls in the presence of boron. Modelling of …
We report molecular beam epitaxy growth of Sr-doped Bi$_2$Se$_3$ films on (111) BaF$_2$ substrate, aimed to realize unusual superconducting properties inherent to Sr$_x$Bi$_2$Se$_3$ single crystals. Despite wide range of the compositions, we do not achieve superconductivity. To explore the reason for that we study structural, morphological and electronic properties of the films and compare them to the corresponding properties of the single crystals. The dependence of the c-lattice constant in the films on Sr content appears to be more than an order of magnitude stronger than in the crystals. C…
Ferroelectric oxides have attracted much attention due to their wide range of applications, especially in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and its nanostructuration to develop alternative cost-effective processes are among the central points in current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic …
In this paper the early stages of the self-catalyzed Vapor-Liquid-Solid (VLS) growth of GaAs nanowires on epi-ready Si substrates by Molecular Beam Epitaxy (MBE) are studied. The interaction of Ga nano-droplets (NDs) with the silica overlayer is investigated by X-ray Photoemission Spectroscopy (XPS) and Atomic Force Microscopy (AFM). We show how Ga NDs drill the silica overlayer and make contact with bulk Si to allow GaAs nanowires (NWs) epitaxial growth by studying each of the three steps of the NW growth process sequentially: Ga NDs pre-deposition, post-deposition annealing to reach the NW g…
Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, i.e., strong spin-orbit interaction and large Landé g-factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, we combine the II-VI cadmium telluride (CdTe) with the III-V InSb in the form of core-shell (InSb-CdTe) nanowires and explore potential applications based on the elect…
Images of uniform and upright nanowires are fascinating, but often, they are quite puzzling, when epitaxial templating from the substrate is clearly absent. Here, we reveal the physics underlying one such hidden growth guidance mechanism through a specific example - the case of ZnO nanowires grown on silicon oxide and glass. We show how electric fields exerted by the insulating substrate may be manipulated through the surface charge to define the orientation and polarity of the nanowires. Surface charge is ubiquitous on the surfaces of semiconductors and insulators, and as a result, substrate …
Shape memory alloys often show a complex hierarchical morphology in the martensitic state. To understand the formation of this twin-within-twins microstructure, we examine epitaxial Ni-Mn-Ga films as a model system. In-situ scanning electron microscopy experiments show beautiful complex twinning patterns with a number of different mesoscopic twin boundaries and macroscopic twin boundaries between already twinned regions. We explain the appearance and geometry of these patterns by constructing an internally twinned martensitic nucleus, which can take the shape of a diamond or a parallelogram, w…
Terrace-sized, single-orientation graphene can be grown on top of a carbon buffer layer on silicon carbide by thermal decomposition. Despite its homogeneous appearance, a surprisingly large variation in electron transport properties is observed. Here, we employ Aberration-Corrected Low-Energy Electron Microscopy (AC-LEEM) to study a possible cause of this variability. We characterize the morphology of stacking domains between the graphene and the buffer layer of high-quality samples. Similar to the case of twisted bilayer graphene, the lattice mismatch between the graphene layer and the buffer…
Domain Morphology, Electrocaloric Response, and Negative Capacitance States of Ferroelectric Nanowires Array
Institute of Physics, National Academy of Sciences of Ukraine（乌克兰国家科学院物理研究所）；Taras Shevchenko National University of Kyiv（基辅塔拉斯舍甫琴科国立大学）；V. Lashkariov Institute of Semiconductor Physics, National Academy of Sciences of Ukraine（乌克兰国家科学院V.拉什卡廖夫半导体物理研究所）；Slovenia Jožef Stefan Institute（斯洛文尼亚约瑟夫斯蒂芬研究所）；Frantsevich Institute for Problems in Materials Science, National Academy of Sciences of Ukraine（乌克兰国家科学院弗兰采维奇材料科学问题研究所）；Zone 5 Technologies（Zone 5科技有限公司）
The growth of large crystallite continuous monolayer materials like molybdenum disulfide (MoS$_2$) with desired morphology via chemical vapor deposition (CVD) remains a challenge. In CVD, the complex interplay of various factors like growth temperature, precursors, and nature of the substrate decides the crystallinity, crystallite size, and coverage area of the grown MoS$_2$ monolayer. In the present work, we report about the role of weight fraction of molybdenum trioxide (MoO$_3$), Sulfur, and carrier gas flow rate towards nucleation and monolayer growth. The concentration of MoO$_3$ weight f…
This paper investigates the size effect on the coalescence process of contacting nanoparticles. It is revealed by molecular dynamics that the nanometer-sized surface curvature coupled with the effective melting temperature exhibits a strong influence on the atom diffusion at the interface, and is therefore critical to the coalescence time. This effect is particularly pronouncing for surface curvatures below 20 nm. A phenomenological model is derived from the melting-point reduction approach to describe the kinetic process of nanowire coalescence and is validated against a variety of simulation…
Growth and characterization of GaN/Ga2O3 Nanowire Heterostructures for Ultraviolet Optoelectronics
Institute of Solid State Physics, University of Latvia（拉脱维亚大学固体物理研究所）；RISE Research Institutes of Sweden（瑞典RISE研究院）；KTH Royal Institute of Technology（瑞典皇家理工学院）；Hexagem AB（Hexagem公司）
The functional properties of devices based on perovskite oxides depend strongly on the growth modes that dramatically affect surface morphology and microstructure of the hetero-structured thin films. To achieve atomically flat surface morphology, which is usually a necessity for the high quality devices, understanding of the growth mechanism of heteroepitaxial thin film is indispensable. In this study, we explore heteroepitaxial growth kinetics of the SrRuO3 using intermittent growth scheme of pulsed laser epitaxy and ex-situ atomic force microscopy. Two significant variations in surface rough…
The shape dependence for the technologically important nickel oxide (NiO) nanocrystals on (001) strontium titanate substrates is investigated under the generalized Wulff-Kaichew (GWK) theorem framework. It is found that the shape of the NiO nanocrystals is primarily governed by the existence (or absence) of interfacial strain. Nanocrystals that have a fully pseudomorphic interface with the substrate (i.e. the epitaxial strain is not relaxed) form an embedded smooth ball-crown morphology with {001}, {011}, {111} and high-index {113} exposed facets with a negative Wulff point. On the other hand,…
We present a study of the synthesis of epitaxial V$_2$O$_3$ films on $c$-plane Al$_2$O$_3$ substrates by reactive dc-magnetron sputtering. The results reveal a temperature window, at substantially lower values than previously reported, wherein epitaxial films can be obtained when deposited on [0001] oriented surfaces. The films display a metal-insulator transition with a change in resistance of up to four orders of magnitude, strongly dependent on the O$_2$ partial pressure during deposition. While the electronic properties of the films show sensitivity to the amount of O$_2$ present during de…
Large-scale CuO nanowires are commonly synthesized by the thermal oxidation method. However, the growth mechanism remains controversial between diffusion growth mechanism and vapor-solid (VS) growth mechanism. In this study, we investigated the morphology and atomic structure of the CuO nanowires by electron microscopes to clarify the growth mechanism. We found that they were grown with the annealing ambient during the cooling process and there were screw dislocations in the nanowires. These features indicate that the VS growth mechanism is applicable to explain the growth of the CuO nanowires…
