A huge enhancement of the superconducting transition temperature Tc was observed in tetragonal FeSe superconductor under high pressure. The onset temperature became as high as 27 K at 1.48 GPa and the pressure coefficient showed a huge value of 9.1 K/GPa. The upper critical field Hc2 was estimated to be ~ 72 T at 1.48 GPa. Because of the high Hc2, FeSe system may be a candidate for application as superconducting wire rods. Moreover, the investigation of superconductivity on simple structured FeSe may provide important clues to the mechanism of superconductivity in iron-based superconductors.
We report the synthesis of tetragonal $\mathrm{FeS}_x\mathrm{Se}_{1-x}$ films ($x \leq 0.78$) by pulsed-laser deposition. To fabricate the tetragonal alloy films with tetragonal FeSe and hexagonal FeS targets, we adopted an alternate deposition technique with FeSe buffer layer on MgO(001). The overall film composition is controlled by the thickness ratio of FeS / FeSe layers. The out-of-plane lattice parameter of the films follows Vegard's law, demonstrating homogeneous alloying by inter-diffusion. The sulfur solid solubility reaches $x = 0.78$ in the $\mathrm{FeS}_x\mathrm{Se}_{1-x}$ films, w…
We use the state-of-the-arts density-functional-theory method to study various magnetic orders and their effects on the electronic structures of the FeSe. Our calculated results show that, for the spins of the single Fe layer, the striped antiferromagnetic orders with distortion are more favorable in total energy than the checkerboard antiferromagnetic orders with tetragonal symmetry, which is consistent with known experimental data, and the inter-layer magnetic interaction is very weak. We investigate the electronic structures and magnetic property of the distorted phases. We also present our…
We fabricated superconducting FeSe wires by the chemical-transformation PIT process. The obvious correlation between annealing temperature and phase transformation was observed. Annealing above 500^{\circ}C produced wire-core transformation from hexagonal to tetragonal phase. Furthermore the hexagonal phase completely transformed into the tetragonal phase by annealing at 1000^{\circ}C. With increasing annealing temperature, the superconducting property was dramatically improved, associated with the evolution of the tetragonal phase.
Recent experiments have reported that inserting metal atoms or small molecules in between the FeSe layers of $β$-FeSe can significantly enhance the superconducting transition temperature. Here, based on first-principles electronic structure calculations, we propose a stable compound SnOFeSe by alternatively stacking the SnO and $β$-FeSe layers. The predicted SnOFeSe has the same tetragonal structure as the well-known FeAs-based compound LaOFeAs, meanwhile their electronic structures in the nonmagnetic state are quite similar. The magnetic ground state of SnOFeSe is predicted to be the dimer an…
The nature of the tetragonal-to-orthorhombic structural transition at $T_s\approx90$ K in single crystalline FeSe is studied using shear-modulus, heat-capacity, magnetization and NMR measurements. The transition is shown to be accompanied by a large shear-modulus softening, which is practically identical to that of underdoped Ba(Fe,Co)$_2$As$_2$, suggesting very similar strength of the electron-lattice coupling. On the other hand, a spin-fluctuation contribution to the spin-lattice relaxation rate is only observed below $T_s$. This indicates that the structural, or "nematic", phase transition …
Superconductivity under pressure in FeSe ($T_{\rm c}$$\sim$7.5 K) has been investigated using single-crystal specimens through the measurements of DC magnetization and electrical resistivity. A characteristic three-step increase in $T_{\rm c}$ has been found under hydrostatic pressure up to $\sim$34 K above 7 GPa. The structural transition from a tetragonal phase to an orthorhombic phase ($T_{\rm s}$$\sim$87 K) is found to disappear at $P$$\sim$2.3 GPa, above which $T_{\rm c}$ increases rapidly, suggesting that the superconductivity is enhanced by the tetragonal environment. Under non-hydrosta…
Superconductivity was recently found in the simple tetragonal FeSe structure. Recent studies suggest that FeSe is unconventional, with the symmetry of the superconducting pairing state still under debate. To tackle these problems, clean single crystals and thin films are required. Here we report the fabrication of superconducting beta-phase FeSe1-x thin films on different substrates using a pulsed laser deposition (PLD) technique. Quite interestingly, the crystal orientation, and thus, superconductivity in these thin films is sensitive to the growth temperature. At 320C, films grow preferably …
Traditional band theory of perfect crystalline solids often uses as input the structure deduced from diffraction experiments; when modeled by the minimal unit cell this often produces a spatially averaged model. The present study illustrates that this is not always a safe practice unless one examines if the intrinsic bonding mechanism is capable of benefiting from the formation of a distribution of lower symmetry local environments that differ from the macroscopically averaged structure. This can happen either due to positional, or due to magnetic symmetry breaking. By removing the constraint …
The significantly enhanced superconducting transition temperature ($T_c$) of an FeSe monolayer on SrTiO$_3$(001) substrate has attracted extensive attention in recent years. Here, based on first-principles electronic structure calculations, we propose another candidate substrate LaO(001) for the epitaxial growth of FeSe monolayer to realize superconductivity. Our calculations show that for the optimal adsorption structure of FeSe monolayer on LaO(001), the stripe antiferromagnetic state and the dimer antiferromagnetic state are almost energetically degenerate, indicating the existence of stron…
We have studied the structural and superconducting properties of tetragonal FeSe under pressures up to 26GPa using synchrotron radiation and diamond anvil cells. The bulk modulus of the tetragonal phase is 28.5(3)GPa, much smaller than the rest of Fe based superconductors. At 12GPa we observe a phase transition from the tetragonal to an orthorhombic symmetry. The high pressure orthorhombic phase has a higher Tc reaching 34K at 22GPa.
A polycrystalline sample of FeSe, which adopts the tetragonal PbO-type structure (P4/nmm) at room temperature, has been prepared using solid state reaction. We have investigated pressure-induced structural changes in tetragonal FeSe at varying hydrostatic pressures up to 0.6 GPa in the orthorhombic (T = 50 K) and tetragonal (T = 190 K) phases using high resolution neutron powder diffraction. We report that the structure is quite compressible with a Bulk modulus around 31 GPa to 33 GPa and that the pressure response is anisotropic with a larger compressibility along the c-axis. Key bond angles …
The discovery of superconductivity in alkali-ammonia co-intercalated FeSe has generated intensive interest because of their highest Tc (~ 45 K) among iron-chalcogenide superconductors with bulk form. Here, we report the phase diagrams of two series of Li/Na-ammonia co-intercalated FeSe1-zTez. When superconductivity is suppressed by Te doping, the magnetic ordering states are emergent. Moreover, a novel phase Lix(NH3)yFe2-δTe2 with possible antiferromagnetism is discovered. This strongly indicates the intimate relation between superconductivity and magnetism in these materials, like in other ir…
Here we establish a combined electronic phase diagram of isoelectronic FeSe1-xSx (0.19 > x > 0.0) and FeSe1-yTey (0.04 < y < 1.0) single crystals. The FeSe1-yTey crystals with y = 0.04 - 0.30 are grown by a hydrothermal ion-deintercalation (HID) method. Based on combined experiments of the specific heat, electrical transport, and angle-resolved photoemission spectroscopy, no signature of the tetragonal-symmetry-broken transition to orthorhombic (nematic) phase is observed in the HID FeSe1-yTey samples, as compared with the FeSe1-xSx samples showing this transition at Ts. A ubiquitous dip-like …
FeSe has a unique ground state in which superconductivity coexists with a nematic order without long-range magnetic ordering at ambient pressure. Here, to study how the pairing interaction evolves with nematicity, we measured the thermal conductivity and specific heat of FeSe$_{1-x}$S$_x$, where the nematicity is suppressed by isoelectronic sulfur substitution. We find that in the whole nematic ($0\leq x \leq 0.17$) and tetragonal ($x=0.20$) regimes, the application of small magnetic field causes a steep increase of both quantities. This indicates the existence of deep minima or line nodes in …
Exploration of new superconductors has always been one of the research directions in condensed matter physics. We report here a new layered heterostructure of [(Fe,Al)(OH)2][FeSe]1.2, which is synthesized by the hydrothermal ion-exchange technique. The structure is suggested by a combination of X-ray powder diffraction and the electron diffraction (ED). [(Fe,Al)(OH)2][FeSe]1.2 is composed of the alternating stacking of tetragonal FeSe layer and hexagonal (Fe,Al)(OH)2 layer. In [(Fe,Al)(OH)2][FeSe]1.2, there exists mismatch between the FeSe sub-layer and (Fe,Al)(OH)2 sub-layer, and the lattice …
The films of FeSe on substrates have attracted attention because of their unusually high-temperature (Tc) superconducting properties whose origins continue to be debated. To disentangle the competing effects of the substrate and interlayer and intralayer processes, we present here results of density functional theory (DFT)-based analysis of the electronic structure of unsupported FeSe films consisting of 1 to 5 layers (1L-5L). Furthermore, by solving the Bardeen-Schrieffer-Cooper (BCS) equation with spin-wave exchange attraction derived from the Hubbard model, we find the superconducting criti…
Due to the simple layered structure, isostructural FeSe and FeSe0.5Te0.5 are clue compounds for understanding the principal mechanisms of superconductivity in the family of Fe-based superconductors. High-pressure magnetic, structural and Mössbauer studies have been performed on single-crystalline samples of superconducting FeSe0.5Te0.5 with Tc = 13.5 K. Susceptibility data have revealed a strong increase of Tc up to 19.5 K for pressures up to 1.3 GPa, followed by a plateau in the Tc(p) dependence up to 5.0 GPa. Further pressure increase leads to a disappearance of the superconducting state aro…
The observation of substantially enhanced superconductivity of single-layer FeSe films on SrTiO3 has stimulated intensive research interest. At present, conclusive experimental data on the corresponding electron-boson interaction is still missing. Here we use inelastic electron scattering spectroscopy and angle resolved photoemission spectroscopy to show that the electrons in these systems are dressed by the strongly polarized lattice distortions of the SrTiO3, and the indispensable non-adiabatic nature of such a coupling leads to the formation of dynamic interfacial polarons. Furthermore, the…
We report flux free growth of superconducting FeSe single crystals by an easy and versatile high temperature melt and slow cooling method for first time. The room temperature XRD on the surface of the piece of such obtained crystals showed single 101 plane of Beta-FeSe tetragonal phase. The bulk powder XRD, being obtained by crushing the part of crystal chunk showed majority tetragonal and minority FeSe hexagonal crystalline phases. Detailed HRTEM images along with SAED (selected area electron diffraction) showed the abundance of both majority and minority FeSe phases. Both transport (RT) and …
In paired Fermi systems, strong many-body effects exhibit in the crossover regime between the Bardeen-Cooper-Schrieffer (BCS) and the Bose-Einstein condensation (BEC) limits. The concept of the BCS-BEC crossover, which is studied intensively in the research field of cold atoms, has been extended to condensed matters. Here, by analyzing the typical superconductors within the BCS-BEC phase diagram, we find that FeSe-based superconductors are prone to shift their positions in the BCS-BEC crossover regime by charge doping or substrate substitution, since their Fermi energies and the superconductin…
We have studied the effect of tensile strain on the superconductivity in FeSe films. 50 nm, 100 nm, and 200 nm FeSe films were grown on MgO, SrTiO$_3$, and LaAlO$_3$ substrates by using a pulsed laser deposition technique. X-ray diffraction analysis showed that the tetragonal phase is dominant in all of our FeSe films. The 50 nm FeSe films on MgO and SrTiO$_3$ are under tensile strain, while the 50 nm FeSe film on LaAlO$_3$ and the other thick FeSe films are unstrained. Superconducting transitions have been observed in unstrained FeSe films with T$_{onset}$ $\approx$ 8 K, which is close to the…
There is an ongoing debate about the relative importance of structural change versus doping charge carriers on the mechanism of superconductivity in Fe-based materials. Elucidating this issue is a major challenge since it would require a large number of samples where structure properties or the carrier density is systematically varied. FeSe, with its structural simplicity, is an ideal platform for addressing this question. It has been demonstrated that the superconductivity in this material can be controlled through crystal lattice tuning, as well as electronic structure manipulation. Here, we…
We report on the observation of high-temperature ($T_\textrm{c}$) superconductivity and magnetic vortices in single-unit-cell FeSe films on anatase TiO$_2$(001) substrate by using scanning tunneling microscopy. A systematic study and engineering of interfacial properties has clarified the essential roles of substrate in realizing the high-$T_\textrm{c}$ superconductivity, probably via interface-induced electron-phonon coupling enhancement and charge transfer. By visualizing and tuning the oxygen vacancies at the interface, we find their very limited effect on the superconductivity, which exclu…
Among the recently discovered iron-based superconductors, ultrathin films of FeSe grown on SrTiO3 substrates have uniquely evolved into a high superconducting-transition-temperature (TC) material. The mechanisms for the high-TC superconductivity are ongoing debate mainly with the superconducting gap characterized with in-situ analysis for FeSe films grown by bottom-up molecular-beam epitaxy. Here, we demonstrate the alternative access to investigate the high-TC superconductivity in ultrathin FeSe with top-down electrochemical etching technique in three-terminal transistor configuration. In add…
Bulk FeSe is superconducting with a critical temperature $T_c$ $\cong$ 8 K and SrTiO$_3$ is insulating in nature, yet high-temperature superconductivity has been reported at the interface between a single-layer FeSe and SrTiO$_3$. Angle resolved photoemission spectroscopy and scanning tunneling microscopy measurements observe a gap opening at the Fermi surface below $\approx$ 60 K. Elucidating the microscopic properties and understanding the pairing mechanism of single-layer FeSe is of utmost importance as it is a basic building block of iron-based superconductors. Here, we use the low-energy …
The single-layer FeSe/SrTiO3 (FeSe/STO) films have attracted much attention because of their simple crystal structure, distinct electronic structure and record high superconducting transition temperature (Tc). The origin of the dramatic Tc enhancement in single-layer FeSe/STO films and the dichotomy of superconductivity between single-layer and multiple-layer FeSe/STO films are still under debate. Here we report a comprehensive high resolution angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy measurements on the electronic structure evolution with doping …
The FeSe superconductor and its related systems have attracted much attention in the iron-based superconductors owing to their simple crystal structure and peculiar electronic and physical properties. The bulk FeSe superconductor has a superconducting transition temperature (Tc) of ~8 K; it can be dramatically enhanced to 37 K at high pressure. On the other hand, its cousin system, FeTe, possesses a unique antiferromagnetic ground state but is non-superconducting. Substitution of Se by Te in the FeSe superconductor results in an enhancement of Tc up to 14.5 K and superconductivity can persist …
Single-layer FeSe films grown on the SrTiO3 substrate (FeSe/STO) have attracted much attention because of their possible record-high superconducting critical temperature Tc and distinct electronic structures in iron-based superconductors. However, it has been under debate on how high its Tc can really reach due to the inconsistency of the results obtained from the transport, magnetic and spectroscopic measurements. Here we report spectroscopic evidence of superconductivity pairing at 83 K in single-layer FeSe/STO films. By preparing high-quality single-layer FeSe/STO films, we observe for the …
Simultaneous high pressure x-ray diffraction and electrical resistance measurements have been carried out on a PbO type α-FeSe0.92 compound to a pressure of 44 GPa and temperatures down to 4 K using designer diamond anvils at synchrotron source. At ambient temperature, a structural phase transition from a tetragonal (P4/nmm) phase to an orthorhombic (Pbnm) phase is observed at 11 GPa and the Pbnm phase persists up to 74 GPa. The superconducting transition temperature (TC) increases rapidly with pressure reaching a maximum of ~28 K at ~ 6 GPa and decreases at higher pressures, disappearing comp…
The coupling between superconductivity and othorhombic distortion is studied in vapor-grown FeSe single crystals using high-resolution thermal-expansion measurements. In contrast to the Ba122-based (Ba122) superconductors, we find that superconductivity does not reduce the orthorhombicity below Tc. Instead we find that superconductivity couples strongly to the in-plane area, which explains the large hydrostatic pressure effects. We discuss our results in light of the spinnematic scenario and argue that FeSe has many features quite different from the typical Fe-based superconductors.
The latest discovery of possible high temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate, together with the observation of its unique electronic structure and nodeless superconducting gap, has generated much attention. Initial work also found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer FeSe/SrTiO3 film shows an insulating behavior. Such a dramatic difference between the single-layer and double-layer FeSe/SrTiO3 films is surprising and the underlying origin remains unclear. Here we report ou…
Tetragonal beta-FeSe obtained by hydrothermal reaction is not superconducting and transforms to a triclinic structure at 60 K unlike superconducting FeSe from solid state synthesis, which becomes orthorhombic at 90 K. In contrast, tetragonal iron sulphide FeS from hydrothermal synthesis is superconducting at 4.8 K but undergoes no structural transition. Our results suggest that the absence of superconductivity in hydrothermally synthesized FeSe may be associated to the low-temperature structure with zigzag chains of iron atoms, which is different from the known orthorhombic Cmme structure of s…
Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By carefully controlling the depositions on twelve kinds of substrates using pulsed laser deposition technique, high quality single crystalline FeSe samples were fabricated with full width of half maximum 0.515? in the rocking curve and clear four-fold symmetry in phi-scan from x-ray diractions. The films have a maximum Tc 15 K on the CaF2 substrate and do not show…
Charge transfer and electron-phonon coupling (EPC) are proposed to be two important constituents associated with enhanced superconductivity in the single unit cell FeSe films on oxide surfaces. Using high-resolution electron energy loss spectroscopy combined with first-principles calculations, we have explored the lattice dynamics of ultrathin FeSe films grown on SrTiO3. We show that, despite the significant effect from the substrate on the electronic structure and superconductivity of the system, the FeSe phonons in the films are unaffected. The energy dispersion and linewidth associated with…
We report on the structural phase transitions in the S doped FeSe superconductor by powder synchrotron X ray diffraction at high pressures up to 18.5 GPa under compression and decompression modes. In order to create high quasi hydrostatic pressures, diamond anvil cells filled with helium as a pressure transmitting medium were used. It was found that at ambient pressure and room temperature, S doped FeSe has a tetragonal structure. Under compression, in the region of 10 GPa, a phase transition from the tetragonal into the orthorhombic structure is observed, which persists up to 18.5 GPa. Our re…
We report on the emergence of two disconnected superconducting domes in alkali-metal potassium (K)-doped FeSe ultra-thin films grown on graphitized SiC(0001). The superconductivity exhibits hypersensitivity to K dosage in the lower-Tc dome, whereas in the heavily electron-doped higher-Tc dome it becomes spatially homogeneous and robust against disorder, supportive of a conventional Cooper-pairing mechanism. Furthermore, the heavily K-doped multilayer FeSe films all reveal a large superconducting gap of ~ 14 meV, irrespective of film thickness, verifying the higher-Tc superconductivity only in …
The mechanism of high temperature superconductivity in the iron-based superconductors remains an outstanding issue in condensed matter physics. The electronic structure, in particular the Fermi surface topology, is considered to play an essential role in dictating the superconductivity. Recent revelation of distinct electronic structure and possible high temperature superconductivity with a transition temperature Tc above 65 K in the single-layer FeSe films grown on the SrTiO3 substrate provides key information on the roles of Fermi surface topology and interface in inducing or enhancing super…
FeSe is a unique superconductor that can be manipulated to enhance its superconductivity using different routes while its monolayer form grown on different substrates reaches a record high temperature for a two-dimensional system. In order to understand the role played by the substrate and the reduced dimensionality on superconductivity, we examine the superconducting properties of exfoliated FeSe thin flakes by reducing the thickness from bulk down towards 9 nm. Magnetotransport measurements performed in magnetic fields up to 16T and temperatures down to 2K help to build up complete supercond…
We report pair distribution function measurements of the iron-based superconductor FeSe above and below the structural transition temperature. Structural analysis reveals a local orthorhombic distortion with a correlation length of about 4 nm at temperatures where an average tetragonal symmetry is observed. The analysis further demonstrates that the local distortion is larger than the distortion at temperatures where the average observed symmetry is orthorhombic. Our results suggest that the low-temperature macroscopic nematic state in FeSe forms from an imperfect ordering of orbital-degenerac…
Understanding the superconductivity at the interface of FeSe/SrTiO3 is a problem of great contemporary interest due to the significant increase in critical temperature (Tc) compared to that of bulk FeSe, as well as the possibility of an unconventional pairing mechanism and topological superconductivity. We report a study of the influence of a capping layer on superconductivity in thin films of FeSe grown on SrTiO3 using molecular beam epitaxy. We used in vacuo four-probe electrical resistance measurements and ex situ magneto-transport measurements to examine the effect of three capping layers …
We report the superconductivity evolution of one unit cell (1-UC) and 2-UC FeSe films on SrTiO3(001) substrates with potassium (K) adsorption. By in situ scanning tunneling spectroscopy measurement, we find that the superconductivity in 1-UC FeSe films is continuously suppressed with increasing K coverage, whereas non-superconducting 2-UC FeSe films become superconducting with a gap of ~17 meV or ~11 meV depending on whether the underlying 1-UC films are superconducting or not. This work explicitly reveals that the interface electron-phonon coupling is strongly related to the charge transfer a…
We prepared single unit cell FeSe films on GaO$_{2-δ}$ terminated perovskite NdGaO$_{3}$(110) substrates and performed ex situ transport and scanning transmission electron microscopy measurements on the FeTe protected films. Our experimental measurements showed that the single unit cell FeSe films interfaced with GaO$_{2-δ}$ layer are electron doped via interface charge transfer. Most importantly, this type of heterostructure can host interface enhanced superconductivity with an onset temperature of about 28 K, which is much higher than the value of 8 K in bulk FeSe. Our work indicates that Fe…
The dream of room temperature superconductors has inspired intense research effort to find routes for enhancing the superconducting transition temperature (Tc). Therefore, single-layer FeSe on a SrTiO3 substrate, with its extraordinarily high Tc amongst all interfacial superconductors and iron based superconductors, is particularly interesting, but the mechanism underlying its high Tc has remained mysterious. Here we show through isotope effects that electrons in FeSe couple with the oxygen phonons in the substrate, and the superconductivity is enhanced linearly with the coupling strength atop…
Iron-based superconductors are well known for their complex interplay between structure, magnetism and superconductivity. FeSe offers a particularly fascinating example. This material has been intensely discussed because of its extended nematic phase, whose relationship with magnetism is not obvious. Superconductivity in FeSe is highly tunable, with the superconducting transition temperature, $T_\mathrm{c}$, ranging from 8 K in bulk single crystals at ambient pressure to almost 40 K under pressure or in intercalated systems, and to even higher temperatures in thin films. In this topical review…
Recently, interface has been employed to enhance superconductivity in the single-layer FeSe films grown on SrTiO3(001)(STO) with a possible Tc of ~ 80 K, which is nearly ten times of the Tc of bulk FeSe and is above the Tc record of 56 K for the bulk Fe-based superconductors. This work together with those on superconducting oxides interfaces revives the long-standing idea that electron pairing at a two-dimensional (2D) interface between two different materials is a potential path to high transition temperature (Tc) superconductivity. Subsequent angle-resolved photoemission spectroscopy (ARPES)…
The iron-based superconductor FeSe offers a unique possibility to study the interplay of superconductivity with purely nematic as well magnetic-nematic order by pressure (p) tuning. By measuring specific heat under p up to 2.36GPa, we study the multiple phases in FeSe using a thermodynamic probe. We conclude that superconductivity is bulk across the entire p range and competes with magnetism. Our analysis suggests that superconducting and magnetic fluctuations exist over a wide temperature range above the respective bulk transition temperatures, whenever magnetism is present. These observation…
The structural and electronic properties of FeSe ultra-thin layers on Bi$_{2}$Se$_{3}$ have been investigated with a combination of scanning tunneling microscopy and spectroscopy and angle-resolved photoemission spectroscopy. The FeSe multi-layers, which are predominantly 3-5 monolayers (ML) thick, exhibit a hole pocket-like electron band at \barΓ and a dumbbell-like feature at \bar{M}, similar to multi-layers of FeSe on SrTiO$_{3}$. Moreover, the topological state of the Bi2Se3 is preserved beneath the FeSe layer, as indicated by a heavily \it{n}-doped Dirac cone. Low temperature STS does not…
To elucidate the mechanisms behind the enhanced $T_c$ in monolayer (1ML) FeSe on SrTiO$_3$ (STO), we grew highly strained 1ML FeSe on the rectangular (100) face of rutile TiO$_2$, and observed the coexistence of replica bands and superconductivity with a $T_c$ of 63 K. From the similar $T_c$ between this system and 1ML FeSe on STO (001), we conclude that strain and dielectric constant are likely unimportant to the enhanced $T_c$ in these systems. A systematic comparison of 1ML FeSe on TiO$_2$ with other systems in the FeSe family shows that while charge transfer alone can enhance $T_c$, it is …
Since the dramatic interface enhancement of superconducting transition temperature (Tc) was reported in one unit-cell FeSe film grown on SrTiO3 substrate (1-UC FeSe/STO) by molecular beam epitaxy (MBE), related research on this system has become a new frontier in condensed matter physics. In this paper, we present a brief review on this rapidly developing field, mainly focusing on the superconducting properties of 1-UC FeSe/STO. Experimental evidences for the high-temperature superconductivity in 1-UC FeSe/STO, including the direct evidences revealed by transport and diamagnetic measurements, …
Single crystals FeSe_x have been grown in evacuated sealed quartz tube using a NaCl/KCl flux. The products include two crystal structures of tetragon and hexagon. The electronic transport and magnetic properties measurements of FeSe_x single crystal exhibits a superconducting transition at about 10K.
Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe film on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. Here, by ex situ transport measurements, we report on the superconductivity in FeSe ultra-thin films with different thickness on STO substrate. We find that the onset superconducting transition temperature (Tc) decreases with increasing film thickness of FeSe, which is opposite to the behavior usually observed in traditional superconductor films. By systematic post-annealing of 5 UC FeSe film…
The effect of Co doping on supercoductivity of FeSe$_{0.4}$Te$_{0.6}$ single crystals is investigated. The superconducting transition temperature decreases linearly for Co doping with the rate -0.75 K/(Co %). On the other hand, the residual resistivity increase is less than 50 $/mu/Omega$cm for 4 % Co doping. These data are consistent with the sign changing interband scattering mechanism of superconductivity ($s_/pm$ symmetry).
Synthesis of monolayer FeSe on SrTiO3, with greatly enhanced superconductivity compared to bulk FeSe, remains difficult. Lengthy annealing within a certain temperature window is always required to achieve superconducting samples as reported by different groups around the world, but the mechanism of annealing in inducing superconductivity has not been elucidated. We grow FeSe films on SrTiO3 by molecular beam epitaxy and adjust the stoichiometry by depositing additional small amounts of Fe atoms. The monolayer films become superconducting after the Fe deposition without any annealing, and show …
We report protonation in several compounds by an ionic-liquid-gating method, with optimized gating conditions. This leads to single superconducting phases for several compounds. Non-volatility of protons allow post-gating magnetization and transport measurements. The superconducting transition temperature $T_C$ is enhanced to 43.5~K for FeSe$_{0.93}$S$_{0.07}$, and 41~K for FeSe after protonation. Superconductivity with $T_c$$\approx$15~K for ZrNCl, $\approx$7.2~K for 1$T$-TaS$_2$, and $\approx$3.8~K for Bi$_2$Se$_3$ are induced after protonation. Electric transport in protonated FeSe$_{0.93}$…
