Synthesis of monolayer FeSe on SrTiO3, with greatly enhanced superconductivity compared to bulk FeSe, remains difficult. Lengthy annealing within a certain temperature window is always required to achieve superconducting samples as reported by different groups around the world, but the mechanism of annealing in inducing superconductivity has not been elucidated. We grow FeSe films on SrTiO3 by molecular beam epitaxy and adjust the stoichiometry by depositing additional small amounts of Fe atoms. The monolayer films become superconducting after the Fe deposition without any annealing, and show similar superconducting transition temperatures as those of the annealed films in transport measurements. We also demonstrate on the 5-unit-cell films that the FeSe multilayer can be reversibly tuned between the non-superconducting $\sqrt{5} \times \sqrt{5}$ phase with Fe-vacancies and superconducting $1 \times 1$ phase. Our results reveal that the traditional anneal process in essence removes Fe vacancies and the additional Fe deposition serves as a more efficient way to achieve superconductivity. This work highlights the significance of stoichiometry in the superconductivity of FeSe thin films and provides an easy path for superconducting samples.
Tetragonal iron selenide, FeSe, the layered parent compound of the recently discovered superconducting arsenide family, has previously been shown to be non magnetic and superconducting with a critical temperature near 8 K. There has, however, been a lack of consensus as to whether selenium vacancies present due to large deviations from ideal stoichiometry are required to give rise to the superconductivity. Here we describe the results of experiments that demonstrate simply that superconducting iron selenide can only be synthesized as a pure material when near stoichiometric (i.e. FeSe). Signif…
Cryogenic scanning tunneling microscopy is employed to investigate the stoichiometry and defects of epitaxial FeSe thin films on SrTiO3(001) substrates under various post-growth annealing conditions. Low-temperature annealing with an excess supply of Se leads to formation of Fe vacancies and superstructures, accompanied by a superconductivity (metal)-to-insulator transition in FeSe films. By contrast, high-temperature annealing could eliminate the Fe vacancies and superstructures, and thus recover the high-temperature superconducting phase of monolayer FeSe films. We also observe multilayer Fe…
Synthesis, electrical and magnetic characterization of superconducting FeSe0.85 compound is reported. An anomaly in the magnetization against temperature around 90K is observed. Magnetic characterization of a commercial compound with nominal FeSe stoichiometry is also presented. The overall magnetic behaviors as well as the magnetic anomaly in both compounds are discussed in terms of magnetic impurities and secondary phases. Keyword: A. Superconductors
The recently discovered iron arsenide superconductors, which display superconducting transition temperatures as high as 55 K, appear to share a number of general features with high-Tc cuprates, including proximity to a magnetically ordered state and robustness of the superconductivity in the presence of disorder. Here we show that superconductivity in Fe1+dSe, the parent compound of the superconducting arsenide family, is destroyed by very small changes in stoichiometry. Further, we show that non-superconducting Fe1+dSe is not magnetically ordered down to low temperatures. These results sugges…
The strong fascination exerted by the binary compound of FeSe demands reliable engineering protocols and more effective approaches towards inducing superconductivity in FeSe thin films. Our study addresses the peculiarities in pulsed laser deposition which determine FeSe thin film growth and focuses on the film/substrate interface, the tendency for domain matching epitaxial growth but also the disadvantage of chemical heterogeneity. We propose that homogenization of the substrate surface improves the control of stoichiometry, texture, and nanostrain in a way that favors superconductivity even …
We have carried out a detailed study to investigate the existence of an insulating parent phase for FeSe superconductor. The insulating Fe4Se5 with specific Fe-vacancy order shows a 3D-Mott variable range hopping behavior with a Verwey-like electronic correlation at around 45 K. The application of the RTA process at 450 celcius degree results in the destruction of Fe-vacancy order and induces more electron carriers by increasing the Fe3+ valence state. Superconductivity emerges with Tc ~ 8K without changing the chemical stoichiometry of the sample after the RTA process by resulting in the addi…
Understanding the interplay of structural and electronic symmetry breaking in Fe-based high temperature superconductors remains of high interest. In this work we grow strain-patterned multilayer FeSe thin films in a range of thicknesses using molecular beam epitaxy. We study the formation of electronic nematic domains and spatially-varying strain using scanning tunneling microscopy and spectroscopy. We directly visualize the formation of edge dislocations that give rise to a two-dimensional edge dislocation network in the films. Interestingly, we observe a 45 degree in-plane rotation of the di…
We report on the emergence of two disconnected superconducting domes in alkali-metal potassium (K)-doped FeSe ultra-thin films grown on graphitized SiC(0001). The superconductivity exhibits hypersensitivity to K dosage in the lower-Tc dome, whereas in the heavily electron-doped higher-Tc dome it becomes spatially homogeneous and robust against disorder, supportive of a conventional Cooper-pairing mechanism. Furthermore, the heavily K-doped multilayer FeSe films all reveal a large superconducting gap of ~ 14 meV, irrespective of film thickness, verifying the higher-Tc superconductivity only in …
Planar tunneling junctions of the presumably unconventional superconductor FeSe were prepared and investigated. The junctions consisted of FeSe/AlOx/Ag multilayers patterned lithographically into mesa structures. Bias voltage dependent differential conductivities dI/dV(V) of junctions in the tunneling, intermediate barrier strength, and metallic regimes were investigated. Depending on the barrier type between two and four features of the conductivity were obtained, which are discussed in the framework of multiple superconducting energy gaps. Specifically we reproduced with all barrier types an…
Superconductivity is significantly enhanced in monolayer FeSe grown on SrTiO3, but not for multilayer films, in which large strength of nematicity develops. However, the link between the high-transition temperature superconductivity in monolayer and the correlation related nematicity in multilayer FeSe films is not well understood. Here, we use low-temperature scanning tunneling microscopy to study few-layer FeSe thin films grown by molecular beam epitaxy. We observe an incommensurate long-range smectic phase, which solely appears in bilayer FeSe films. The smectic order still locally exists a…
We report on a comparative study of the crystal structure and the magnetic properties of FeSe1-x (x= 0.00 - 0.15) superconducting samples by neutron powder diffraction and magnetization measurements. The samples were synthesized by two different methods: a 'low-temperature' one using powders as a starting material at T =700 C and a "high-temperature' method using solid pieces of Fe and Se at T= 1070 C. The effect of a starting (nominal) stoichiometry on the phase purity of the obtained samples, the superconducting transition temperature Tc, as well as the chemical instability of FeSe1-x at amb…
We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples with different superconducting transition temperatures Tc of 4 K, 9 K and 14 K reveal electronic difference in their Fermi surface and band structure. Indication of the nematic phase transition is observed from temperature-dependent measurements of these samples; the nematic transition temperature is 140-160 K, much higher than 90 K for the bulk FeSe. Potassi…
Mono- and multilayer FeSe thin films grown on SrTiO$_\mathrm{3}$ and BiTiO$_\mathrm{3}$ substrates exhibit a greatly enhanced superconductivity over that found in bulk FeSe. A number of proposals have been advanced for the mechanism of this enhancement. One possibility is the introduction of a cross-interface electron-phonon ($e$-$ph$) interaction between the FeSe electrons and oxygen phonons in the substrates that is peaked in the forward scattering (small ${\bf q}$) direction due to the two-dimensional nature of the interface system. Motivated by this, we explore the consequences of such an …
Thin film growth of iron chalcogenides by pulsed laser deposition (PLD) is still a delicate issue in terms of simultaneous control of stoichiometry, texture, substrate/film interface properties, and superconducting properties. The high volatility of the constituents sharply limits optimal deposition temperatures to a narrow window and mainly challenges reproducibility for vacuum based methods. In this work we demonstrate the beneficial introduction of a semiconducting FeSe$_{1\text{--}x}$Te$_x$ seed layer for subsequent homoepitaxial growth of superconducting FeSe$_{1\text{--}x}$Te$_x$ thin fi…
Iron-chalcogenide single crystals with the nominal composition FeSe$_{0.5}$Te$_{0.5}$ and a transition temperature of $T_{c}\simeq14.6$ K were synthesized by the Bridgman method. The structural and anisotropic superconducting properties of those crystals were investigated by means of single crystal X-ray and neutron powder diffraction, SQUID and torque magnetometry, and muon-spin rotation. Room temperature neutron powder diffraction reveals that 95% of the crystal volume is of the same tetragonal structure as PbO. The structure refinement yields a stoichiometry of Fe_1.045Se_0.406Te_0.594. Add…
Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By carefully controlling the depositions on twelve kinds of substrates using pulsed laser deposition technique, high quality single crystalline FeSe samples were fabricated with full width of half maximum 0.515? in the rocking curve and clear four-fold symmetry in phi-scan from x-ray diractions. The films have a maximum Tc 15 K on the CaF2 substrate and do not show…
The intriguing role of nematicity in iron-based superconductors, defined as broken rotational symmetry below a characteristic temperature, is an intensely investigated contemporary subject. Nematicity is closely connected to the structural transition, however, it is highly doubtful that the lattice degree of freedom is responsible for its formation, given the accumulating evidence for the observed large anisotropy. Here we combine molecular beam epitaxy, angle-resolved photoemission spectroscopy and scanning tunneling microscopy together to study the nematicity in multilayer FeSe films on SrTi…
The discovery of high-temperature (Tc) superconductivity in monolayer FeSe on SrTiO3 raised a fundamental question whether high Tc is commonly realized in monolayer iron-based superconductors. Tetragonal FeS is a key material to resolve this issue because bulk FeS is a superconductor with Tc comparable to that of isostructural FeSe. However, difficulty in synthesizing tetragonal monolayer FeS due to its metastable nature has hindered further investigations. Here we report elucidation of band structure of monolayer FeS on SrTiO3, enabled by a unique combination of in-situ topotactic reaction an…
Nematic state, where the system is translationally invariant but breaks the rotational symmetry, has drawn great attentions recently due to experimental observations of such a state in both cuprates and iron-based superconductors. The mechanism of nematicity that is likely tied to the pairing mechanism of high-Tc, however, still remains controversial. Here, we studied the electronic structure of multilayer FeSe film by angle-resolved photoemission spectroscopy (ARPES). We found that the FeSe film enters the nematic state around 125 K, while the electronic signature of long range magnetic order…
