We studied the effect of quantum confinement on the size of the band gap in single layer epitaxial graphene. Samples with different graphene terrace sizes are studied by using low energy electron microscopy (LEEM) and angle-resolved photoemission spectroscopy (ARPES). The direct correlation between the terrace size extracted from LEEM and the gap size extracted from ARPES shows that quantum confinement alone cannot account for the large gap observed in epitaxial graphene samples.
Quantum systems in confined geometries are host to novel physical phenomena. Examples include quantum Hall systems in semiconductors and Dirac electrons in graphene. Interest in such systems has also been intensified by the recent discovery of a large enhancement in photoluminescence quantum efficiency and a potential route to valleytronics in atomically thin layers of transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se, Te), which are closely related to the indirect to direct bandgap transition in monolayers. Here, we report the first direct observation of the transition from indirect…
The pi bands of epitaxially grown graphene are studied by using high resolution angle resolved photoemission spectroscopy. Clear deviations from the conical dispersion expected for massless Dirac fermions and an anomalous increase of the scattering rate are observed in the vicinity of the Dirac point energy. Possible explanations for such anomalies are discussed in terms of many-body interactions and the opening of a gap. We present detailed experimental evidences in support of the gap scenario. This finding reveals a fundamental intrinsic property of epitaxial graphene and demonstrates the po…
Stanene, a single atomic layer of Sn in a honeycomb lattice, is predicted a candidate wide bandgap two-dimensional (2D) topological insulator and can host intriguing topological states of matter such as quantum anomalous Hall effect and topological superconductivity with different surface modifications. Despite intensive research efforts, one still cannot obtain bulk-insulating stanene samples-a prerequisite for any transport studies and applications of stanene. Here we show the experimental realization of an epitaxial stanene with an insulating bulk bandgap by using PbTe(111) substrates. With…
In this Letter, we demonstrate that it is possible to form a two-dimensional (2D) silicene-like Si$_5$Ge compound by replacing the Si atoms occupying on-top sites in the planar-like structure of epitaxial silicene on ZrB$_2$(0001) by deposited Ge atoms. For coverages below 1/6 ML, the Ge deposition gives rise to a Si$_{6-x}$Ge$_{x}$ alloy (with $x$ between 0 and 1) in which the on-top sites are randomly occupied by Si or Ge atoms. The progressive increase of the valence band maximum with $x$ observed experimentally originates from a selective charge transfer from Ge atoms to Si atoms. These ac…
The capability to control the type and amount of charge carriers in a material and, in the extreme case, the transition from metal to insulator is one of the key challenges of modern electronics. By employing angle resolved photoemission spectroscopy (ARPES) we find that a reversible metal to insulator transition and a fine tuning of the charge carriers from electrons to holes can be achieved in epitaxial bilayer and single layer graphene by molecular doping. The effects of electron screening and disorder are also discussed. These results demonstrate that epitaxial graphene is suitable for ele…
Two-dimensional materials with layered structures, appropriate bandgap, and high carrier mobilities have gathered tremendous interests due to their potential applications in optoelectronic and photovoltaic devices. Here, we report the growth of BiI3 thin film with controllable atomic thickness on graphene-terminated 6H-SiC(0001) substrate by molecular beam epitaxy (MBE) method. The growth kinetic processes and crystalline properties of the BiI3 film are studied by scanning tunneling microscopy (STM). The scanning tunneling spectroscopy (STS) reveals a bandgap of 2.8 eV for monolayer BiI3 with …
We investigate the ultrafast relaxation dynamics of hot Dirac fermionic quasiparticles in multilayer epitaxial graphene using ultrafast optical differential transmission spectroscopy. We observe DT spectra which are well described by interband transitions with no electron-hole interaction. Following the initial thermalization and emission of high-energy phonons, the electron cooling is determined by electron-acoustic phonon scattering, found to occur on the time scale of 1 ps for highly doped layers, and 4-11 ps in undoped layers. The spectra also provide strong evidence for the multilayer stu…
Graphene was deposited on a transparent and flexible substrate and tensile strain up to ~0.8% was loaded by stretching the substrate in one direction. Raman spectra of strained graphene show significant redshifts of 2D and G band (-27.8 cm^-1 and -14.2 cm^-1per 1% strain, respectively), because of the elongation of the carbon-carbon bonds. This indicates that uniaxial strain has been successfully applied on graphene. We also proposed that by applying uniaxial strain on graphene, tunable bandgap at K point can be realized. First principle calculations predicted a bandgap opening of ~300 meV for…
The materials science of graphene grown epitaxially on the hexagonal basal planes of SiC crystals is reviewed. We show that the growth of epitaxial graphene on Si-terminated SiC(0001) is much different than growth on the C-terminated SiC(000 -1) surface, and discuss the physical structure of these graphenes. The unique electronic structure and transport properties of each type of epitaxial graphene is described, as well as progress toward the development of epitaxial graphene devices. This materials system is rich in subtleties, and graphene grown on the two polar faces differs in important wa…
Graphene oxide (GO) flakes have been deposited to bridge the gap between two epitaxial graphene electrodes to produce all-graphene devices. Electrical measurements indicate the presence of Schottky barriers (SB) at the graphene/graphene oxide junctions, as a consequence of the band-gap in GO. The barrier height is found to be about 0.7 eV, and is reduced after annealing at 180 $^\circ$C, implying that the gap can be tuned by changing the degree of oxidation. A lower limit of the GO mobility was found to be 850 cm$^2$/Vs, rivaling silicon. {\it In situ} local oxidation of patterned epitaxial gr…
A new model for graphene, epitaxially grown on silicon carbide is proposed. Density functional theory modelling of epitaxial graphene functionalization by hydrogen, fluorine and phenyl groups has been performed with hydrogen and fluorine showing a high probability of cluster formation in high adatom concentration. It has also been shown that the clusterization of fluorine adatoms provides midgap states in formation due to significant flat distortion of graphene. The functionalization of epitaxial graphene using larger species (methyl and phenyl groups) renders cluster formation impossible, due…
Graphene is a promising contender to succeed the throne of silicon in electronics. To this goal, large-scale epitaxial growth of graphene on substrates should be developed. Among various methods along this line, epitaxial growth of graphene on SiC substrates by thermal decomposition of surface layers has proved itself quite satisfactory both in quality and in process reliability. Even modulation of structural and hence electronic properties of graphene is possible by tuning the graphene/SiC interface structure. The challenges for this graphene-on-SiC technology, however, are the abdication of …
We report results from two-dimensional Raman spectroscopy studies of large-area epitaxial graphene grown on SiC. Our work reveals unexpectedly large variation in Raman peak position across the sample resulting from inhomogeneity in the strain of the graphene film, which we show to be correlated with physical topography by coupling Raman spectroscopy with atomic force microscopy. We report that essentially strain free graphene is possible even for epitaxial graphene.
High-performance graphene field-effect transistors have been fabricated on epitaxial graphene synthesized on a two-inch SiC wafer, achieving a cutoff frequency of 100 GHz for a gate length of 240 nm. The high-frequency performance of these epitaxial graphene transistors not only shows the highest speed for any graphene devices up to date, but it also exceeds that of Si MOSFETs at the same gate length. The result confirms the high potential of graphene for advanced electronics applications, marking an important milestone for carbon electronics.
We have studied the electronic and magnetic properties of graphene and their modification due to the adsorption of water and other gas molecules. Water and gas molecules adsorbed on nanoscale graphene were found to play the role of defects which facilitate the tunability of the bandgap and allow us to control the magnetic ordering of localized states at the edges. The adsorbed molecules push the wavefunctions corresponding to $α$-spin (up) and $β$-spin (down) states of graphene to the opposite (zigzag) edges. This breaks the sublattice and molecular point group symmetry that results in opening…
Ultra-wide bandgap semiconductors are ushering in the next generation of high power electronics. The correct crystal orientation can make or break successful epitaxy of such semiconductors. Here it is discovered that single-crystalline layers of $α$-(AlGa)$_2$O$_3$ alloys spanning bandgaps of 5.4 - 8.6 eV can be grown by molecular beam epitaxy. The key step is found to be the use of m-plane sapphire crystal. The phase transition of the epitaxial layers from the $α$- to the narrower bandgap $β$-phase is catalyzed by the c-plane of the crystal. Because the c-plane is orthogonal to the growth fro…
Quasi-free standing epitaxial graphene is obtained on SiC(0001) by hydrogen intercalation. The hydrogen moves between the 6root3 reconstructed initial carbon layer and the SiC substrate. The topmost Si atoms which for epitaxial graphene are covalently bound to this buffer layer, are now saturated by hydrogen bonds. The buffer layer is turned into a quasi-free standing graphene monolayer with its typical linear pi-bands. Similarly, epitaxial monolayer graphene turns into a decoupled bilayer. The intercalation is stable in air and can be reversed by annealing to around 900 degrees Celsius.
We show using scanning tunneling microscopy, spectroscopy, and ab initio calculations that several intercalation structures exist for Na in epitaxial graphene on SiC(0001). Intercalation takes place at room temperature and Na electron-dopes the graphene. It intercalates in-between single-layer graphene and the carbon-rich interfacial layer. It also penetrates beneath the interfacial layer and decouples it to form a second graphene layer. This decoupling is accelerated by annealing and is verified by direct Na deposition onto the interface layer. Our observations show that intercalation in grap…
Bilayer graphene (BLG) possesses a finite bandgap when a potential difference is introduced between the two graphene layers. The potential difference is known to be introduced by surface charge transfer. Thus, it is expected that a finite bandgap exists at the metal contacts. The bandgap at the metal-BLG interface can be detected by the superlinear current-voltage characteristics in back-gate field-effect transistors, caused by carriers tunneling through the bandgap. The superlinearity was higher in the positively gated region, attributed to hole doping from the Cr/Au electrodes. The control e…
We have measured the electrical response to NO$_2$, N$_2$, NH$_3$ and CO for epitaxial graphene and quasi freestanding epitaxial graphene on 6H-SiC substrates. Quasi freestanding epitaxial graphene shows a 6 fold increase in NO2 sensitivity compared to epitaxial graphene. Both samples show a sensitivity better than the experimentally limited 1 ppb. The strong increase in sensitivity of quasi freestanding epitaxial graphene can be explained by a Fermi-energy close to the Dirac Point leading to a strongly surface doping dependent sample resistance. Both sensors show a negligible sensitivity to N…
The Diels-Alder surface modified top epitaxial graphene layer, with newly created pair of sp3 carbon centres, results in abrupt minimization of interlayer van der Waals interactions between two stacked graphene planes, and escapes the wafer during post-reaction manipulation stage, leaving the layer under it almost pristine-like. Above picture shows Diels-Alder functionalized sp2/sp3 graphene adduct leaves the parent wafer. In this communication we systematically address several fundamental questions in graphene surface chemistry, which are of extreme importance for device fabrication, and in s…
Raman spectra were measured for mono-, bi- and trilayer graphene grown on SiC by solid state graphitization, whereby the number of layers was pre-assigned by angle-resolved ultraviolet photoemission spectroscopy. It was found that the only unambiguous fingerprint in Raman spectroscopy to identify the number of layers for graphene on SiC(0001) is the linewidth of the 2D (or D*) peak. The Raman spectra of epitaxial graphene show significant differences as compared to micromechanically cleaved graphene obtained from highly oriented pyrolytic graphite crystals. The G peak is found to be blue-shift…
The epitaxial growth of technically-important $β$-Ga$_2$O$_3$ semiconductor thin films have not been realized on flexible substrates due to limitations by the high-temperature crystallization conditions and the lattice-matching requirements. In this report, for the first time single crystal $β$-Ga$_2$O$_3$(-201) thin films is epitaxially grown on the flexible CeO2 (001)-buffered hastelloy tape. The results indicate that CeO$_2$ (001) has a small bi-axial lattice mismatch with $β$-Ga$_2$O$_3$ (-201), thus inducing a simultaneous double-domain epitaxial growth. Flexible photodetectors are fabric…
We investigated the electroluminescent properties of the epitaxial graphene/SiC junction. The temperature and current dependence of electroluminescence from the epitaxial graphene/SiC is measured within a temperature range of 50-300 K. The result of electroluminescence at 300~K is compared with the electroluminescent spectra from aluminium/SiC junction. The difference between the spectra is explained by the different band bending, which could lead to the tunable LED due to the semi-metal character of the graphene. We observed the electroluminescence at both bias polarities and we described the…
We investigate the effects of Na adsorption on the electronic structure of bare and Ir cluster superlattice covered epitaxial graphene on Ir(111) using angle-resolved photoemission spectroscopy and scanning tunneling microscopy. At Na saturation coverage a massive charge migration from sodium atoms to graphene raises the graphene Fermi level by about 1.4 eV relative to its neutrality point. We find that Na is adsorbed on top of the graphene layer and when coadsorbed onto an Ir cluster superlattice it results in the opening of a large bandgap of Δ = 740 meV comparable to the one of Ge and with …
The observation of the anomalous quantum Hall effect in exfoliated graphene flakes triggered an explosion of interest in graphene. It was however not observed in high quality epitaxial graphene multilayers grown on silicon carbide substrates. The quantum Hall effect is shown on epitaxial graphene monolayers that were deliberately grown over substrate steps and subjected to harsh processing procedures, demonstrating the robustness of the epitaxial graphene monolayers and the immunity of their transport properties to temperature, contamination and substrate imperfections. The mobility of the mon…
In general, there are two major factors affecting bandgaps in nanostructures: (i) the enhanced electron-electron interactions due to confinement and (ii) the modified self-energy of electrons due to the dielectric screening. While recent theoretical studies on graphene nanoribbons (GNRs) report on the first effect, the effect of dielectric screening from the surrounding materials such as substrates has not been thoroughly investigated. Using large-scale electronic structure calculations based on the GW approach, we show that when GNRs are deposited on substrates, bandgaps get strongly suppress…
We demonstrate hydrogen assisted growth of high quality epitaxial graphene on the C-face of 4H-SiC. Compared with the conventional thermal decomposition technique, the size of the growth domain by this method is substantially increased and the thickness variation is reduced. Based on the morphology of epitaxial graphene, the role of hydrogen is revealed. It is found that hydrogen acts as a carbon etchant. It suppresses the defect formation and nucleation of graphene. It also improves the kinetics of carbon atoms via hydrocarbon species. These effects lead to increase of the domain size and the…
Hydrogen adsorption on graphene in commensurate periodic arrangements leads to bandgap opening at the Dirac point and the emergence of dispersionless midgap bands. We study these bandgap effects and their dependence on periodicity for a single hydrogen adsorbate on periodic graphene supercells using spin-polarized density-functional theory calculations. Our results show that for certain periodicities, marked by a scale factor of three, the bandgap is suppressed to a great extent, and has a special level structure around the neutrality point. We present explanations for the origin of the change…
The recent discovery of the ability to perform direct epitaxial growth of graphene layers on semiconductor Ge surfaces led to the huge interest to this topic. One of the reasons for this interest is the chance to overcome several present-day drawbacks on the way of the graphene integration in the modern semiconductor technology. The other one is connected with the fundamental studies of the new graphene-semiconductor interfaces, that might help with the deeper understanding of mechanisms, which governs graphene growth on different substrates as well as shed light on the interaction of graphene…
The development of graphene electronics requires the integration of graphene devices with Si-CMOS technology. Most strategies involve the transfer of graphene sheets onto silicon, with the inherent difficulties of clean transfer and subsequent graphene nano-patterning that degrades considerably the electronic mobility of nanopatterned graphene. Epitaxial graphene (EG) by contrast is grown on an essentially perfect crystalline (semi-insulating) surface, and graphene nanostructures with exceptional properties have been realized by a selective growth process on tailored SiC surface that requires …
We have measured optical absorption in mid-infrared spectral range on hydrogen intercalated epitaxial graphene grown on silicon face of SiC. We have used attenuated total reflection geometry to enhance absorption related to the surface and SiC/graphene interface. The samples of epitaxial graphene have been intercalated in the temperature range of 790 to 1250$^\circ$C and compared to the reference samples of hydrogen etched SiC. We have found that although the Si-H bonds form at as low temperatures as 790$^\circ$C, the well developed bond order has been reached only for epitaxial graphene inter…
The formation of graphene on any desirable substrate is extremely essential for the successful replacement of Si with graphene in all technological applications in the beyond-CMOS era. Recently, we observed that a Ti layer formed on epitaxial graphene by electron-beam evaporation has the sufficiently large area of contact with the surface of epitaxial graphene for the exfoliation process to take place. We also observed that the exfoliated FLG on the Ti layer can be easily transferred onto a SiO2/Si substrate. In this paper, we have proposed a new technique for transferring graphene having a la…
The interaction of graphene with metallic substrates reveals phenomena and properties of great relevance for applications in nanotechnology. In this review, the vibrational characterization by means of various inelastic scattering spectroscopies are surveyed for graphene epitaxially grown on metals and transition carbides. In particular, the manifestations of electron-phonon interaction, such as Kohn anomalies, the evaluation of elastic properties and the nanoscale control of phonon modes are presented and discussed.
Graphene has shown great application potentials as the host material for next generation electronic devices. However, despite its intriguing properties, one of the biggest hurdles for graphene to be useful as an electronic material is its lacking of an energy gap in the electronic spectra. This, for example, prevents the use of graphene in making transistors. Although several proposals have been made to open a gap in graphene's electronic spectra, they all require complex engineering of the graphene layer. Here we show that when graphene is epitaxially grown on the SiC substrate, a gap of ~ 0.…
Graphene grown epitaxially on SiC has been proposed as a material for carbon-based electronics. Understanding the interface between graphene and the SiC substrate will be important for future applications. We report the ability to image the interface structure beneath single-layer graphene using scanning tunneling microscopy. Such imaging is possible because the graphene appears transparent at energies of 1 eV above or below the Fermi energy. Our analysis of calculations based on density functional theory shows how this transparency arises from the electronic structure of a graphene layer on a…
The application of graphene in electronic devices requires large scale epitaxial growth. The presence of the substrate, however, usually reduces the charge carrier mobility considerably. We show that it is possible to decouple the partially sp3-hybridized first graphitic layer formed on the Si-terminated face of silicon carbide from the substrate by gold intercalation, leading to a completely sp2-hybridized graphene layer with improved electronic properties.
The light-like dispersion of graphene monolayer results in many novel electronic properties in it1, however, this gapless feature also limits the applications of graphene monolayer in digital electronics2. A rare working solution to generate a moderate bandgap in graphene monolayer is to cut it into one-dimensional (1D) nanometre-wide ribbons3-13. Here we show that a wide bandgap can be created in a unique 1D strained structure, i.e., graphene-nanoribbon-like (GNR-like) structure, of a continuous graphene sheet via strong interaction between graphene and the metal substrate, instead of cutting…
Three types of first generation epitaxial graphene field effect transistors (FET) are presented and their relative merits are discussed. Graphene is epitaxially grown on both the carbon and silicon faces of hexagonal silicon carbide and patterned with electron beam lithography. The channels have a Hall bar geometry to facilitate magnetoresistance measurements. FETs patterned on the Si-face exhibit off-to-on channel resistance ratios that exceed 30. C-face FETs have lower off-to-on resistance ratios, but their mobilities (up to 5000 cm2/Vs) are much larger than that for Si-face transistors. Ini…
We review progress in developing epitaxial graphene as a material for carbon electronics. In particular, improvements in epitaxial graphene growth, interface control and the understanding of multilayer epitaxial graphene's electronic properties are discussed. Although graphene grown on both polar faces of SiC is addressed, our discussions will focus on graphene grown on the (000-1) C-face of SiC. The unique properties of C-face multilayer epitaxial graphene have become apparent. These films behave electronically like a stack of nearly independent graphene sheets rather than a thin Bernal-stack…
Pyrochlore oxides $A_2B_2$O$_7$ have been a fruitful playground for condensed matter physics because of the unique geometry in the crystal structure. Especially focusing on the $A$-site tetrahedral sub-lattice, in particular, pyrochlore oxides $A_2B_2$O$_7$ ($A$ = Sn, Pb and $B$ = Nb, Ta), recent theoretical studies predict the emergence of the "quasi-flat band" structure as a result of the strong hybridization between filled $A$-n$s$ and O-2$p$ orbitals. In this work, we have established the growth conditions of Sn$_2$Nb$_2$O$_7$, Sn$_2$Ta$_2$O$_7$, Pb$_2$Nb$_2$O$_7$, and Pb$_2$Ta$_2$O$_7$ fi…
We study the charge transfer between a quasi-free-standing monolayer graphene, produced by hydrogen intercalation, and surface acceptor states. We consider two models of acceptor density of states to explain the high hole densities observed in graphene and find the density responsivity to the gate voltage. By studying magneto-oscillations of the carrier density we provide an experimental way to determine the relevant model.
We analyse doping of graphene grown on SiC in two models which differ by the source of charge transfered to graphene, namely, from SiC surface and from bulk donors. For each of the two models, we find the maximum electron density induced in monolayer and bilayer graphene, which is determined by the difference between the work function for electrons in pristine graphene and donor states on/in SiC, and analyse the responsivity of graphene to the density variation by means of electrostatic gates.
We report the synthesis and evidence of graphene fluoride, a two-dimensional wide bandgap semiconductor derived from graphene. Graphene fluoride exhibits hexagonal crystalline order and strongly insulating behavior with resistance exceeding 10 G$Ω$ at room temperature. Electron transport in graphene fluoride is well described by variable-range hopping in two dimensions due to the presence of localized states in the band gap. Graphene obtained through the reduction of graphene fluoride is highly conductive, exhibiting a resistivity of less than 100 k$Ω$ at room temperature. Our approach provide…
Using First-principle calculations, substrate effect of O-terminated (rt3 x rt3) MgO (111) on graphene was investigated for spintronics application. Surprisingly, the graphene can be turned into a spin-polarized semiconductor, which implies that the totally spin-polarized current can be generated and its on/off switching can be also controlled. The origin of the spin-polarized band structure is spin-ordering due to alternative sp2-sp3 covalent bondings induced by the MgO (111) substrate. The results indicate that the tailored pattern of the chemisorption can be highly efficient or introducing …
Van der Waals heterostructures formed by assembling different two-dimensional atomic crystals into stacks can lead to many new phenomena and device functionalities. In particular, graphene/boron-nitride heterostructures have emerged as a very promising system for band engineering of graphene. However, the intrinsic value and origin of the bandgap in such heterostructures remain unresolved. Here we report the observation of an intrinsic bandgap in epitaxial graphene/boron-nitride heterostructures with zero crystallographic alignment angle. Magneto-optical spectroscopy provides a direct probe of…
In this work, using self-consistent tight-binding calculations, for the first time, we show that a direct to indirect bandgap transition is possible in an armchair graphene nanoribbon by the application of an external bias along the width of the ribbon, opening up the possibility of new device applications. With the help of Dirac equation, we qualitatively explain this bandgap transition using the asymmetry in the spatial distribution of the perturbation potential produced inside the nanoribbon by the external bias. This is followed by the verification of the bandgap trends with a numerical te…
Graphene is attractive for spintronics due to its long spin life time and high mobility. So far only thick and polycrystalline slabs have been used as ferromagnetic electrodes. We report the growth of flat, epitaxial ultrathin Co films on graphene. These display perpendicular magnetic anisotropy in the thickness range 0.5-1nm, which is confirmed by theory. PMA, epitaxy and ultrathin thickness bring new perspectives for graphene-based spintronic devices such as the zero-field control of an arbitrary magnetization direction, band matching between electrodes and graphene, and interface effects su…
We report electrical transport measurements on a suspended ultra-low-disorder graphene nanoribbon(GNR) with nearly atomically smooth edges that reveal a high mobility exceeding 3000 cm2 V-1 s-1 and an intrinsic band gap. The experimentally derived bandgap is in quantitative agreement with the results of our electronic-structure calculations on chiral GNRs with comparable width taking into account the electron-electron interactions, indicating that the origin of the bandgap in non-armchair GNRs is partially due to the magnetic zigzag edges.
Epitaxial graphene on SiC possesses, quite remarkably, an electron spectrum similar to that of freestanding samples. Yet, the coupling to the substrate, albeit small, affects the quasiparticle properties. Combining \emph{ab initio} calculations with symmetry analysis, we derive a modified Dirac-Weyl Hamiltonian for graphene epilayers. While for the epilayer on the C-face the Dirac cone remains almost intact, for epilayers on the Si-face the band splitting is about 30\,meV. At certain energies, the Dirac bands are significantly distorted by the resonant interaction with interface states, which …
In recent years, graphene growth optimization has been one of the key routes towards large-scale, high-quality graphene production. We have measured in-situ residual gas content during epitaxial graphene growth on silicon carbide (SiC) to find detrimental factors of epitaxial graphene growth. The growth conditions in high vacuum and purified argon are compared. The grown epitaxial graphene is studied by Raman scattering mapping and mechanical strain, charge density, number of graphene layers and graphene grain size are evaluated. Charge density and carrier mobility has been studied by Hall eff…
The thermal decomposition of SiC surface provides, perhaps, the most promising method for the epitaxial growth of graphene on a material useful in the electronics platform. Currently, efforts are focused on a reliable method for the growth of large-area, low-strain epitaxial graphene that is still lacking. We report here a novel method for the fast, single-step epitaxial growth of large-area homogeneous graphene film on the surface of SiC(0001) using an infrared CO2 laser (10.6 μm) as the heating source. Apart from enabling extreme heating and cooling rates, which can control the stacking orde…
The maximum oscillation frequency (fmax) quantifies the practical upper bound for useful circuit operation. We report here an fmax of 70 GHz in transistors using epitaxial graphene grown on the C-face of SiC. This is a significant improvement over Si-face epitaxial graphene used in the prior high frequency transistor studies, exemplifying the superior electronics potential of C-face epitaxial graphene. Careful transistor design using a high κ dielectric T-gate and self-aligned contacts, further contributed to the record-breaking fmax.
We present a new fabrication method for epitaxial graphene on SiC which enables the growth of ultra-smooth defect- and bilayer-free graphene sheets with an unprecedented reproducibility, a necessary prerequisite for wafer-scale fabrication of high quality graphene-based electronic devices. The inherent but unfavorable formation of high SiC surface terrace steps during high temperature sublimation growth is suppressed by rapid formation of the graphene buffer layer which stabilizes the SiC surface. The enhanced nucleation is enforced by decomposition of polymer adsorbates which act as a carbon …
The growth of graphene by catalytic decomposition of ethylene on Cu(111) in an ultra-high vacuum system was investigated with low energy electron diffraction, low energy electron microscopy, and atomic force microscopy. Attempts to form a graphene overlayer using ethylene at pressures as high as 10 mTorr and substrate temperatures as high as 900 $^\circ$C resulted in almost no graphene growth. By using an argon overpressure, the growth of epitaxial graphene on Cu(111) was achieved. The suppression of graphene growth without the use of an argon overpressure is attributed to Cu sublimation at el…
We study the broadband optical conductivity and ultrafast carrier dynamics of epitaxial graphene in the few-layer limit. Equilibrium spectra of nominally buffer, monolayer, and multilayer graphene exhibit significant terahertz and near-infrared absorption, consistent with a model of intra- and interband transitions in a dense Dirac electron plasma. Non-equilibrium terahertz transmission changes after photoexcitation are shown to be dominated by excess hole carriers, with a 1.2-ps mono-exponential decay that reflects the minority-carrier recombination time.
Combining scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we demonstrate how to tune the doping of epitaxial graphene from p to n by exploiting the structural changes that occur spontaneously on the Ge surface upon thermal annealing. Furthermore, using first principle calculations we build a model that successfully reproduces the experimental observations. Since the ability to modify graphene electronic properties is of fundamental importance when it comes to applications, our results provide an important contribution towards the integration of graphene with conven…
