Graphene nanoribbons (GNRs) based T junctions were designed and studied in this paper. These junctions were made up of shoulders (zigzag GNRs) joined with stems (armchair GNRs). We demonstrated the intrinsic transport properties and effective boron (or nitrogen) doping of the junctions by using first principles quantum transport simulation. Several interesting results were found: i) The I-V characteristics of the pure-carbon T junctions were shown to obey Ohm law and the electrical conductivity of the junction depends on the height of the stem sensitively. ii) boron (or nitrogen) doping on the stems doesnt change the Ohm law of the T junctions, but the result is opposite when doping process occurs at the shoulders. This feature could make such quasi-2D T junction a possible candidate for nanoscale junction devices in a 2D network of nanoelectronic devices in which conducting pathways can be controlled.
Using the ab initio pseudopotential density functional method, we investigate the functionalization of halogen molecules into graphene-based nanostructures with zigzag and armchair edges. We find that halogen molecules adsorb through chemisorption on the zigzag edge carbon atoms with a binding energy of ~1-5 eV and their adsorption on a perfect zigzag edge is preferred, in sharp contrast to physisorption on the armchair edge and elsewhere where they adsorb with a binding energy of ~0.07 eV. We suggest that our findings would be utilized for an approach to the separation of zigzag graphene nano…
We investigated the vibrational properties of graphene nanoribbons by means of first-principles calculations on the basis of density functional theory. We confirm that the phonon modes of graphene nanoribbons with armchair and zigzag type edges can be interpreted as fundamental oscillations and their overtones. These show a characteristic dependence on the nanoribbon width. Furthermore, we demonstrate that a mapping of the calculated Gamma-point phonon frequencies of nanoribbons onto the phonon dispersion of graphene corresponds to an "unfolding" of nanoribbons' Brillouin zone onto that of gra…
We have studied the adsorption of Li atoms at the hollow sites of graphene nanoribbons (zigzag and armchair), graphene, and fullerenes by means of density functional theory calculations including local and semilocal functionals. The binding energy of a Li atom on armchair nanoribbons (of about 1.70 eV for LSDA and 1.20 eV for PBE) is comparable to the corresponding value in graphene (1.55 and 1.04 eV for LSDA and PBE, respectively). Notably, the interaction between Li and zigzag nanoribbons is much stronger. The binding energy of Li at the edges of zigzag nanoribbons is about 50% stronger than…
Novel route for the establishing of magnetism in realistic oxidized graphene nanoribbons is proposed. Modelling of the migration of hydroxyl groups from central part to the zig-zag edges of graphene nanoribbons passivated by oxygen are performed with using density functional theory. The presence of hydroxyl groups near the edges leads formation of dangling bonds there instead saturated due to oxidation and repairs of magnetism diminished by edges oxidation. The route of manufacturing and stability of new type of magnetic graphene nanoribbons are also discussed.
Armchair graphene nanoribbons with different proportions of edge oxygen atoms are investigated by using crystal orbital method based on density functional theory. All the nanoribbons are energetically favorable, although buckled edges are present. Isolated edge oxygen atoms cause semiconductor-metal transition via introducing edge states, while adjacent edge oxygen atoms not. For the graphene nanoribbons with all oxygen atoms on the edges, both band gap and carrier mobility alternate with respect to the ribbon width. The carrier mobilities are as 18%-65% large as those of the graphene nanoribb…
As a possible way of modifying the intrinsic properties of graphene we study the doping of graphene by embedded boron clusters with density functional theory. Cluster doping is technologically relevant as the cluster implantation technique can be readily applied to graphene. We find that B7 clusters embedded into graphene and graphene nanoribbons are structurally stable and locally metallize the system. This is done both by the reduction of the Fermi energy and by the introduction of boron states near the Fermi level. A linear chain of boron clusters forms a metallic "wire" inside the graphene…
Growing graphene nanoribbons from small organic molecules encapsulated in carbon nanotubes can result in products with uniform width and chirality. We propose a method based on encapsulation of 1,2,4-trichlorobenzene from the liquid phase and subsequent annealing. This procedure results in graphene nanoribbons several tens of nanometers long. The presence of nanoribbons was proven by Raman spectra both on macroscopic samples and on the nanoscale by tip-enhanced Raman scattering and high-resolution transmission electron microscopic images.
We theoretically investigate the thermoelectric properties of zigzag graphene nanoribbons in the presence of extended line defects, substrate impurities and edge roughness along the nanoribbon's length. A nearest-neighbor tight-binding model for the electronic structure and a fourth nearest- neighbor force constant model for the phonon bandstructure are used. For transport we employ quantum mechanical non-equilibrium Green's function simulations. Starting from the pristine zigzag nanoribbon structure that exhibits very poor thermoelectric performance, we demonstrate how after a series of engin…
We propose a natural way to create quantum-confined regions in graphene in a system that allows large-scale device integration. We show, using first-principles calculations, that a single graphene layer on a trenched region of $[000\bar{1}]$ $SiC$ mimics i)the energy bands around the Fermi level and ii) the magnetic properties of free-standing graphene nanoribbons. Depending on the trench direction, either zigzag or armchair nanoribbons are mimicked. This behavior occurs because a single graphene layer over a $SiC$ surface loses the graphene-like properties, which are restored solely over the …
A theory is developed for interband tunneling in semiconducting carbon nanotube and graphene nanoribbon p-n junction diodes. Characteristic length and energy scales that dictate the tunneling probabilities and currents are evaluated. By comparing the Zener tunneling processes in these structures to traditional group IV and III-V semiconductors, it is proved that for identical bandgaps, carbon based 1D structures have higher tunneling probabilities. The high tunneling current magnitudes for 1D carbon structures suggest the distinct feasibility of high-performance tunneling-based field-effect tr…
The transport properties of carriers in semiconducting graphene nanoribbons are studied by comparing the effects of phonon, impurity, and line-edge roughness scattering. It is found that scattering from impurities located at the surface of nanoribbons, and from acoustic phonons are as important as line edge roughness scattering. The relative importance of these scattering mechanisms varies with the temperature, Fermi level location, and the width of the ribbons. Based on the analysis, strategies for improvement of low-field mobility are described.
We show that the ground state of zigzag bilayer graphene nanoribbons is non-magnetic. It also possesses a finite gap, which has a non-monotonic dependence with the width as a consequence of the competition between bulk and strongly attractive edge interactions. All results were obtained using {ab initio} total energy density functional theory calculations with the inclusion of parametrized van der Waals interactions.
Graphene nanoribbons have attracted attention for their novel electronic and spin transport properties1-6, and because nanoribbons less than 10 nm wide have a band gap that can be used to make field effect transistors. However, producing nanoribbons of very high quality, or in high volumes, remains a challenge. Here, we show that pristine few-layer nanoribbons can be produced by unzipping mildly gas-phase oxidized multiwalled carbon nanotube using mechanical sonication in an organic solvent. The nanoribbons exhibit very high quality, with smooth edges (as seen by high-resolution transmission e…
Vibrational properties of graphene nanoribbons are examined with density functional based tight-binding method and non-resonant bond polarization theory. We show that the recently discovered reconstructed zigzag edge can be identified from the emergence of high-energy vibrational mode due to strong triple bonds at the edges. This mode is visible also in the Raman spectrum. Total vibrational density of states of the reconstructed zigzag edge is observed to resemble the vibrational density of states of armchair, rather than zigzag, graphene nanoribbon. Edge-related vibrational states increase in…
Today graphene nanoribbons and other graphene-based nanostructures can be synthesized with atomic precision. But while investigations have concentrated on straight graphene ribbons of fixed crystal orientation, ribbons with intrinsic curvature have remained mainly unexplored. Here, we investigate electronic transport in intrinsically curved graphene nanoribbons coupled to straight leads, using two computational approaches. Stationary approach shows that while the straight leads govern the conductance gap, the presence of curvature blurs the gap and reduces on-off ratio. An advanced time-depend…
Graphene nanoribbons are prepared inside boron nitride nanotubes by liquid phase encapsulation and subsequent annealing of 1,2,4-trichlorobenzene. The product is imaged with high resolution transmission electron microscopy, and characterized by optical absorption and Raman spectroscopy. Carbon-containing material is detected inside the boron nitride nanotubes with energy-dispersive x-ray spectroscopy (EDS) and scanning transmission electron microscopy (STEM). The observed structures twist under the electron beam and the characteristic features of nanoribbons appear in the Raman spectra.
The flexoelectric and electronic properties of zig-zag graphene nanoribbons are explored under mechanical bending using state of the art first principles calculations. A linear dependence of the bending induced out of plane polarization on the applied strain gradient is found. The inferior flexoelectric properties of graphene nanoribbons can be improved by more than two orders of magnitude by hydrogen and fluorine functionalization (CH and CF nanoribbons). A large out of plane flexoelectric effect is predicted for CF nanoribbons. The origin of this enhancement lies in the electro-negativity di…
We investigate from first principles the electronic and optical properties of edge-modulated armchair graphene nanoribbons, including both quasi-particle corrections and excitonic effects. Exploiting the oscillating behavior of the ribbon energy gap, we show that minimal width modulations are sufficient to obtain confinement of both electrons and holes, thus forming optically active quantum dots with unique properties, such as cohexistence of dot-like and extended excitations and fine tunability of optical spectra, with great potential for optoelectronic applications.
Using the density functional theory, we have demonstrated the chemical functionalization of semiconducting graphene nanoribbons (GNRs) with Stone-Wales (SW) defects by carboxyl (COOH) groups. It is found that the geometrical structures and electronic properties of the GNRs changed significantly, and the electrical conductivity of the system could be considerably enhanced by mono-adsorption and double-adsorption of COOH, which sensitively depends upon the axial concentration of SW defects COOH pairs (SWDCPs). With the increase of the axial concentration of SWDCPs, the system would transform fro…
We investigate from first principles the optoelectronic properties of nanometer-sized armchair graphene nanoribbons (GNRs). We show that many-body effects are essential to correctly describe both energy gaps and optical response. As a signature of the confined geometry, we observe strongly bound excitons dominating the optical spectra, with a clear family dependent binding energy. Our results demonstrate that GNRs constitute 1D nanostructures whose absorption and luminescence performance can be controlled by changing both family and edge termination.
Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show drain-current modulation of approximately 10 at 300 K, increasing to nearly 106 at 4 K. The strong temperature dependence of the minimum current indicates the opening of a bandgap for CVD-grown GNR-FETs. The extracted bandgap is estimated to be around 0.1 eV by differential conductance methods. This work highlights the development of CVD-grown large-area graphene …
We study electronic properties of graphene derivatives which have closed edges. They are finite-length graphene nanoribbons and graphene nanodisks. No metallic states are found in finite-length zigzag nanoribbons though all infinite-length zigzag nanoribbons are metallic. We also study hexagonal, parallelogrammic and trigonal nanodisks with zigzag or armchair edges. No metallic states are found in these nanodisks either except trigonal zigzag nanodisks. It is interesting that we can design the degeneracy of the metallic states arbitrarily in trigonal zigzag nanodisks by changing the size.
The Dirac electrons of graphene, an intrinsic zero gap semiconductor, uniquely carry spin and pseudospin that give rise to many fascinating electronic and transport properties. While isolated zigzag graphene nanoribbons are antiferromagnetic semiconductors, we show by means of first-principles and tight-binding calculations that zigzag graphene nanoribbons supported on graphene are half-metallic as a result of spin- and pseudospin-symmetry breaking. In particular, half-metallic Dirac cones are formed at K (K') near the Fermi level. The present results demonstrate that the unique combination of…
We investigate theoretically resonant tunneling through double-bended graphene nanoribbon structures, i.e., armchair-edged graphene nanoribbons (AGNRs) in between two semi-infinite zigzag graphene nanoribbon (ZGNR) leads. Our numerical results demonstrate that the resonant tunneling can be tuned dramatically by the Fermi energy and the length and/or widths of the AGNR for both the metallic and semiconductor-like AGNRs. The structure can also be use to control the valley polarization of the tunneling currents and could be useful for potential application in valleytronics devices.
We report the experimental observation of conductance quantization in graphene nanoribbons, where 1D transport subbands are formed due to the lateral quantum confinement. We show that this quantization in graphene nanoribbons can be observed at temperatures as high as 80 K and channel lengths as long as 1.7 $μ$m. The observed quantization is in agreement with that predicted by theoretical calculations.
We show that the assumption of a nontrivial zero band gap for a graphene sheet within an effective relativistic field theoretical model description of interacting Dirac electrons on the surface of graphene describes the experimental band gap of graphene nanoribbons for a wide range of widths. The graphene band gap is dynamically generated, corresponding to a nontrivial gapless solution, found in the limit of an infinitely wide graphene ribbon. The nanoribbon band gap is determined by the experimental graphene work function.
In this paper, we develop an analytical approach to predict the field-induced alignment of cantilevered graphene nanoribbons. This approach is validated through molecular simulations using a constitutive atomic electrostatic model. Our results reveal that graphene's field-oriented bending angle is roughly proportional to the square of field strength or the graphene length for small deformations, while is roughly independent of graphene width. The effective bending stiffness and the longitudinal polarizability are also found to be approximately proportional to the square of graphene length. Com…
In contrast to the well recognized transverse-electric-field-induced half-metallicity in zigzag graphene nanoribbons, here we demonstrate by first-principles calculations that zigzag graphene nanoribbons sandwiched between hexagonal boron nitride nanoribbons or sheets can be tuned into half-metal simply by a bias voltage or a moderate compressive strain. The half-metallicity is attributed to an enhanced coupling effect of spontaneous polarization and asymmetrical exchange correlation along the ribbon width. The findings should open a viable route for efficient spin-resolved band engineering in…
The fabrication of atomically precise structures with designer electronic properties is one of the emerging topics in condensed matter physics. The required level of structural control can either be reached through atomic manipulation using the tip of a scanning tunneling microscope (STM) or by bottom-up chemical synthesis. In this review, we focus on recent progress in constructing novel, atomically precise artificial materials: artificial lattices built through atom manipulation and graphene nanoribbons (GNRs) realized by on-surface synthesis. We summarize the required theoretical background…
The atomic structure, stacking sequences and electronic structure of folded graphene nanoribbons (FGNRs) are investigated by first-principles calculations. It reveals that the common configurations of all FGNRs are racket-like structures including a nanotube-like edge and two flat nanoribbons. Interestingly, the two flat nanoribbons can form new stacking styles instead of the most stable AB-stacking sequences for bilayer nanoribbons. The stability of the FGNRs are associated with several factors of initial structures, such as interlayer distance of two nanoribbons, stacking sequences, edge sty…
A simple one-stage solution-based method was developed to produce graphene nanoribbons by sonicating graphite powder in organic solutions with polymer surfactant. The graphene nanoribbons were deposited on silicon substrate, and characterized by Raman spectroscopy and atomic force microscopy. Single-layer and few-layer graphene nanoribbons with a width ranging from sub-10 nm to tens of nm and length ranging from hundreds of nm to 1 μm were routinely observed. Electrical transport properties of individual graphene nanoribbons were measured in both the back-gate and polymer-electrolyte top-gate …
We report a first-principles based study of mesoscopic quantum transport in chemically doped graphene nanoribbons with a width up to 10 nm. The occurrence of quasibound states related to boron impurities results in mobility gaps as large as 1 eV, driven by strong electron-hole asymmetrical backscattering phenomena. This phenomenon opens new ways to overcome current limitations of graphene-based devices through the fabrication of chemically-doped graphene nanoribbons with sizes within the reach of conventional lithography.
We derive analytical expressions for the Young's modulus and the Poisson's ratio of the graphene nanoribbon, in which free edges are warped by the compressive edge stress. Our analytical formulas explicitly illustrate the reduction of the Young's modulus by the warped free edges, leading to the obvious width dependence for the Young's modulus of the graphene nanoribbon. The Poisson's ratio is also reduced by the warped free edges, and negative Poisson's ratio can be achieved in the graphene nanoribbon with an ultra-narrow width. These results are comparable with previous theoretical works.
Graphene nanoribbons are quasi-one-dimensional meterials with finite width. Characterizing a wide class of nanoribbons by edge shape and width, we make a systematic analysis of their electronic properties. The band gap structure of nanoribbons is shown to exhibit a valley structure with stream-like sequences of metallic or almost metallic nanoribbons. Among them, all zigzag nanoribbons are metallic, and armchair nanoribbons are metallic by period of 3. We find that these stream-like sequences correspond to equi-width curves, and that the band gap of chiral and armchair nanoribbons oscillate as…
The universality of $k$-dependent electron-photon and electron-phonon matrix elements is discussed for graphene nanoribbons and carbon nanotubes. An electron undergoes a change in wavevector in the direction of broken translational symmetry, depending on the light polarization direction. We suggest that this phenomenon originates from a microscopic feature of chirality.
Graphene nanoribbons are widely regarded as promising building blocks for next-generation carbon-based devices. A critical issue to their prospective applications is whether and to what degree their electronic structure can be externally controlled. Here, we combine simple model Hamiltonians with extensive first-principles calculations to investigate the response of armchair graphene nanoribbons to transverse electric fields. Such fields can be achieved either upon laterally gating the nanoribbon or incorporating ambipolar chemical co-dopants along the edges. We reveal that the field induces a…
Graphene nanoribbons present diverse electronic properties ranging from semiconducting to half-metallic, depending on their geometry, dimensions and chemical composition. Here we present a route to control these properties via externally applied mechanical deformations. Using state-of-the-art density functional theory calculations combined with classical elasticity theory considerations, we find a remarkable Young's modulus value of ~7 TPa for ultra-narrow graphene strips and a pronounced electromechanical response towards bending and torsional deformations. Given the current advances in the s…
We report energy estimated to dissociate a C-C bond of a graphene sheet to form nanoribbons of armchair and zigzag configurations using first principles calculations. For the ground state energy calculations, the configurations considered are with spin, and without spin polarization. It is observed that the energy required to dissociate a C-C bond of a graphene sheet to form zigzag configuration is higher than that of armchair configuration for both spin polarized state, as well as non-spin polarized state. Therefore, formation of smooth edged graphene nanoribbons along the crystallographic di…
The successful fabrication of single layer graphene has greatly stimulated the progress of the research on graphene. In this article, focusing on the basic electronic and transport properties of graphene nanoribbons (GNRs), we review the recent progress of experimental fabrication of GNRs, and the theoretical and experimental investigations of physical properties and device applications of GNRs. We also briefly discuss the research efforts on the spin polarization of GNRs in relation to the edge states.
We theoretically study current dynamics of graphene nanoribbons subject to bias dc and ac driven fields. We showed that graphene nanoribbons exhibit negative high-harmonic differential conductivity. Negative differential conductivity appears when bias electric filed is in the neighborhood of applied ac filed amplitude. We also observe both even and odd high-harmonic negative differential conductivity at wave mixing of two commensurate frequencies. The even harmonics are more pronounced than the odd harmonics. A possible use of the present method for generating terahertz frequencies at even har…
Using a continuum Dirac theory, we study the density and spin response of zigzag edge terminated graphene ribbons subjected to edge potentials and Zeeman fields. Our analytical calculations of the density and spin responses of the closed system (fixed particle number) to the static edge fields, show a highly nonlinear Weber-Fechner type behavior where the response depends logarithmically on the edge potential. The dependence of the response on the size of the system (e.g. width of a nanoribbon) is also uncovered. Zigzag edge graphene nanoribbons, therefore, provide a realization of response of…
We investigate electron and phonon transport through edge disordered zigzag graphene nanoribbons based on the same methodological tool of nonequilibrium Green functions. We show that edge disorder dramatically reduces phonon thermal transport while being only weakly detrimental to electronic conduction. The behavior of the electronic and phononic elastic mean free paths points to the possibility of realizing an electron-crystal coexisting with a phonon-glass. The calculated thermoelectric figure of merit (ZT) values qualify zigzag graphene nanoribbons as a very promising material for thermoele…
Chiral graphene nanoribbons are extremely interesting structures due to their low bandgaps and potential development of spin-polarized edge states. Here, we study their band structure on low work function silver surfaces and assess the effect of charge transfer on their properties.
An analytical device model for a graphene nanoribbon phototransistor (GNR-PT) is presented. GNR-PT is based on an array of graphene nanoribbons with the side source and drain contacts, which is sandwiched between the highly conducting substrate and the top gate. Using the developed model, we derive the explicit analytical relationships for the source-drain current as a function of the intensity and frequency of the incident radiation and find the detector responsivity. It is shown that GNR-PTs can be rather effective photodetectors in infrared and terahertz ranges of spectrum.
The anchoring of benzene molecules on lithium adsorption sites at the surface of graphene and nanoribbons thereof are investigated. The effects of adsorbate densities, specific adsorption locations, and spin states on the structural stability and electronic properties of the underlying graphene derivatives are revealed. At sufficiently high densities, bare lithium adsorption turns armchair graphene nanoribbons metallic and their zigzag counterparts half-metallic due to charge transfer from the adatom to the π electronic system. Upon benzene adsorption, the lithium cation encounters two π syste…
It is known that there is a wide class of quasi-two-dimensional graphenelike nanomaterials which in many respects can outperform graphene. So, here in addition to graphene, the attention is directed to stanene (buckled honeycomb structure) and phosphorene (puckered honeycomb structure). It is shown that, depending on the doping, these materials can have magnetically ordered edges. Computed diagrams of magnetic phases illustrate that, on the one hand, n-type doped narrow zigzag nanoribbons of graphene and stanene have antiferromagnetically aligned magnetic moments between the edges. On the othe…
We analyze the relevance of finite-size effects to the electronic structure of long graphene nanoribbons using a divide and conquer density functional approach. We find that for hydrogen terminated graphene nanoribbons most of the physical features appearing in the density of states of an infinite graphene nanoribbon are recovered at a length of 40 nm. Nevertheless, even for the longest systems considered (72 nm long) pronounced edge effects appear in the vicinity of the Fermi energy. The weight of these edge states scales inversely with the length of the ribbon and they are expected to become…
We analyze the collective mode spectrum of graphene nanoribbons within the random phase approximation. In the undoped case, only metallic armchair nanoribbons support a propagating plasmon mode. Landau damping of this mode is shown to be suppressed through the chirality of the single particle wavefunctions. We argue that undoped zigzag nanoribbons should not support plasmon excitations because of a broad continuum of particle-hole excitations associated with surface states, into which collective modes may decay. Doped nanoribbons have properties similar to those of semiconductor nanowires, inc…
A theory of electron states for graphene nanoribbons with a smoothly varying width is developed. It is demonstrated that the standard adiabatic approximation allowing to neglect the mixing of different standing waves is more restrictive for the massless Dirac fermions in graphene than for the conventional electron gas. For the case of zigzag boundary conditions, one can expect a well-pronounced conductance quantization only for highly excited states. This difference is related to the relativistic Zitterbewegung effect in graphene.
A theoretical study of the transport properties of zigzag and armchair graphene nanoribbons with a magnetic barrier on top is presented. The magnetic barrier modifies the energy spectrum of the nanoribbons locally, which results in an energy shift of the conductance steps towards higher energies. The magnetic barrier also induces Fabry-Perot type oscillations, provided the edges of the barrier are sufficiently sharp. The lowest propagating state present in zigzag and metallic armchair nanoribbons prevent confinement of the charge carriers by the magnetic barrier. Disordered edges in nanoribbon…
We demonstrate anisotropic etching of single-layer graphene by thermally-activated nickel nanoparticles. Using this technique, we obtain sub-10nm nanoribbons and other graphene nanostructures with edges aligned along a single crystallographic direction. We observe a new catalytic channeling behavior, whereby etched cuts do not intersect, resulting in continuously connected geometries. Raman spectroscopy and electronic measurements show that the quality of the graphene is resilient under the etching conditions, indicating that this method may serve as a powerful technique to produce graphene na…
We report on the possibility for a spin valve effect driven by edge defect engineering of zigzag graphene nanoribbons. Based on a mean-field spin unrestricted Hubbard model, electronic band structures and conductance profiles are derived, using a self-consistent scheme to include gate-induced charge density. The use of an external gate is found to trigger a semiconductor-metal transition in clean zigzag graphene nanoribbons, whereas it yields a closure of the spin-split bandgap in the presence of Klein edge defects. These features could be exploited to make novel charge and spin based switches…
The hybrid graphene - hexagonal boron nitride (G-hBN) systems offer new routes in the design of nanoscale electronic devices. Using {\it ab initio} density functional theory calculations we investigate the dynamics of zig-zag nanoribbons a few interatomic distances wide. Several structures are analyzed, namely pristine graphene, hBN and G-hBN systems. By passivating the nanoribbon edges with hydrogen and different halogen atoms, one may tune the electronic and mechanical properties, like the band gap energies and the natural frequencies of vibration.
Using a tight binding model, we theoretically study the electronic properties of zigzag boron-carbon-nitride (BCN) nanoribbons where the outermost C atoms of zigzag graphene nanoribbons are replaced with B and N atoms. We show that the flat bands and edge states appear at the Fermi level when the number of B and N atoms are equal except the case of six times supercell. To investigate the origin of the edge states in BCN nanoribbons, we consider the semi-infinite graphene sheet with zigzag edge where outermost C atoms are replaced with B and N atoms. We analytically demonstrate the presence of …
Based on atomistic simulations, the nonlinear elastic properties of monolayer graphene nanoribbons under quasistatic uniaxial tension are predicted, emphasizing the effect of edge structures (armchair and zigzag, without and with hydrogen passivation). The results of atomistic simulations are interpreted within a theoretical framework of thermodynamics, which enables determination of the nonlinear functions for the strain-dependent edge energy and the hydrogen adsorption energy, for both zigzag and armchair edges. Due to the edge effects, the initial Young's modulus of graphene nanoribbons und…
We used a complete tight-binding band structure of graphene nanoribbon to obtain, for the first time, analytical techniques for observing photon assisted transport, and dynamic localization of electrons in the graphene nanoribbons. When the ribbons are subject to a multi-frequency dc-ac field, photon assisted replicas show up at rather strong drive force. The strong dependence of the photon peaks on ac amplitudes allow for high-harmonic dynamic oscillations at these amplitudes. We identified regions of positive differential conductivity where a nanoelectronic graphene device may be operated as…
We characterize the transport properties of functionalized graphene nanoribbons using extensive first-principles calculations based on density functional theory (DFT) that encompass both monovalent and divalent ligands, hydrogenated defects and vacancies. We find that the edge metallic states are preserved under a variety of chemical environments, while bulk conducting channels can be easily destroyed by either hydrogenation or ion or electron beams, resulting in devices that can exhibit spin conductance polarization close to unity.
Although carbon nanotubes consist of honeycomb carbon, they have never been fabricated from graphene directly. Here, it is shown by quantum molecular-dynamics simulations and classical continuum-elasticity modeling, that graphene nanoribbons can, indeed, be transformed into carbon nanotubes by means of twisting. The chiralities of the tubes thus fabricated can be not only predicted but also externally controlled. This twisting route is an opportunity for nanofabrication, and is easily generalizable to ribbons made of other planar nanomaterials.
Graphene nanoribbons with perfect edges are predicted to exhibit interesting electronic and spintronic properties, notably quantum-confined bandgaps and magnetic edge states. However, graphene nanoribbons produced by lithography have, to date, exhibited rough edges and low-temperature transport characteristics dominated by defects, mainly variable range hopping between localized states in a transport gap near the Dirac point. Here, we report that one- and two-layer nanoribbons quantum dots made by unzipping carbon nanotubes10 exhibit well-defined quantum transport phenomena, including Coulomb …
Spin-dependent electronic transport properties of Fe-terminated zig-zag graphene nanoribbons (zGNR) have been studied using first-principles transport simulations. The spin configuration of proposed zGNR junction can be controlled with external magnetic field, and the tunneling junction show MR>1000 at small bias and is a perfect spin-filter by applying uniform external magnetic filed at small bias.
