Graphene nanoribbons present diverse electronic properties ranging from semiconducting to half-metallic, depending on their geometry, dimensions and chemical composition. Here we present a route to control these properties via externally applied mechanical deformations. Using state-of-the-art density functional theory calculations combined with classical elasticity theory considerations, we find a remarkable Young's modulus value of ~7 TPa for ultra-narrow graphene strips and a pronounced electromechanical response towards bending and torsional deformations. Given the current advances in the synthesis of nanoscale graphene derivatives, our predictions can be experimentally verified opening the way to the design and fabrication of miniature electromechanical sensors and devices based on ultra-narrow graphene nanoribbons.
We have fabricated suspended few layer (1-3 layers) graphene nanoribbon field effect transistors from unzipped multiwall carbon nanotubes. Electrical transport measurements show that current-annealing effectively removes the impurities on the suspended graphene nanoribbons, uncovering the intrinsic ambipolar transfer characteristic of graphene. Further increasing the annealing current creates a narrow constriction in the ribbon, leading to the formation of a large band-gap and subsequent high on/off ratio (which can exceed 104). Such fabricated devices are thermally and mechanically stable: re…
We report electrical transport measurements on a suspended ultra-low-disorder graphene nanoribbon(GNR) with nearly atomically smooth edges that reveal a high mobility exceeding 3000 cm2 V-1 s-1 and an intrinsic band gap. The experimentally derived bandgap is in quantitative agreement with the results of our electronic-structure calculations on chiral GNRs with comparable width taking into account the electron-electron interactions, indicating that the origin of the bandgap in non-armchair GNRs is partially due to the magnetic zigzag edges.
We have theoretically investigated electromechanical properties of freely suspended carbon nanotubes when a current is injected into the tubes using a scanning tunneling microscope. We show that a shuttle-like electromechanical instability can occur if the bias voltage exceeds a dissipation-dependent threshold value. An instability results in large amplitude vibrations of the carbon nanotube bending mode, which modify the current-voltage characteristics of the system.
Morphology mediates the interplay between the structure and electronic transport in atomically thin nanoribbons such as graphene as the relaxation of edge stresses occurs preferentially via out-of-plane deflections. In the case of end-supported suspended nanoribbons that we study here, past experiments and computations have identified a range of equilibrium morphologies, in particular for graphene flakes, yet a unified understanding of their relative stability remains elusive. Here, we employ atomic-scale simulations and a composite framework based on isotropic elastic plate theory to chart ou…
Monolayer graphene exhibits exceptional electronic and mechanical properties, making it a very promising material for nanoelectromechanical (NEMS) devices. Here, we conclusively demonstrate the piezoresistive effect in graphene in a nano-electromechanical membrane configuration that provides direct electrical readout of pressure to strain transduction. This makes it highly relevant for an important class of nano-electromechanical system (NEMS) transducers. This demonstration is consistent with our simulations and previously reported gauge factors and simulation values. The membrane in our expe…
Suspended graphene nano-ribbons formed during current annealing of suspended graphene flakes have been investigated experimentally. Transport measurements show the opening of a transport gap around charge neutrality due to the formation of "Coulomb islands", coexisting with quantum Hall conductance plateaus appearing at moderate values of magnetic field $B$. Upon increasing $B$, the transport gap is rapidly suppressed, and is taken over by a much larger energy gap due to electronic correlations. Our observations show that suspended nano-ribbons allow the investigation of phenomena that could n…
We investigate the electromechanical response of doubly clamped graphene nanoribbons to a transverse gate voltage. An analytical model is developed to predict the field-induced deformation of graphene nanoribbons as a function of field intensity and graphene geometry. This model is validated thought atomistic simulations using the combination of a constitutive charge-dipole model and a pseudo-chemical many-body potential. As a newly observed effect of electric polarization, this field-induced deflection allows the graphene to oscillate at its natural frequency, which is found to decrease drama…
We present numerical simulations of high field transport in both suspended and deposited armchair graphene nanoribbon (A-GNR) on HfO2 substrate. Drift velocity in suspended GNR does not saturate at high electric field (F), but rather decreases, showing a maximum for F=10 kV/cm. Deposition on HfO2 strongly degrades the drift velocity by up to a factor of 10 with respect to suspended GNRs in the low-field regime, whereas at high fields drift velocity approaches the intrinsic value expected in suspended GNRs. Even in the assumption of perfect edges, the obtained mobility is far behind what expect…
The electrical response of two-dimensional electron gas to vibrations of a nanomechanical cantilever containing it is studied. Vibrations of perpendicularly oriented cantilevers are experimentally shown to change oppositely the conductivity near their bases. This indicates the piezoelectric nature of electromechanical coupling. A physical model is developed, which quantitatively explains the experiment. It shows that the main origin of the conductivity change is a rapid change in the mechanical stress on the boundary between suspended and non-suspended areas, rather than the stress itself.
We fabricate a microscale electromechanical system, in which a suspended superconducting membrane, treated as a mechanical oscillator, capacitively couples to a superconducting microwave resonator. As the microwave driving power increases, nonmonotonic dependence of the resonance frequency of the mechanical oscillator on the driving power has been observed. We also demonstrate the optical switching of the resonance frequency of the mechanical oscillator. Theoretical models for qualitative understanding of our experimental observations are presented. Our experiment may pave the way for the appl…
We investigate the role that nonlinearity in the interatomic potential has on the thermal conductance of a suspended nanoribbon when it is subjected to a longitudinal strain. To focus on the first cubic and quartic nonlinear terms of a general potential, we propose an atomic system based on an $α$-$β$ Fermi-Pasta-Ulam nearest neighbor interaction. We perform classical molecular dynamics simulations to investigate the contribution of longitudinal, transversal and flexural modes to the thermal conductance as a function of the $α$-$β$ parameters and the applied strain. We compare the cases where …
Single-electron transistors embedded in a suspended nanobeam or carbon nanotube may exhibit effects originating from the coupling of the electronic degrees of freedom to the mechanical oscillations of the suspended structure. Here, we investigate theoretically the consequences of a capacitive electromechanical interaction when the supporting beam is brought close to the Euler buckling instability by a lateral compressive strain. Our central result is that the low-bias current blockade, originating from the electromechanical coupling for the classical resonator, is strongly enhanced near the Eu…
Here, we present a micro-electromechanical system (MEMS) for the investigation of the electromechanical coupling in graphene and potentially related 2D materials. Key innovations of our technique include: (1) the integration of graphene into silicon-MEMS technology; (2) full control over induced strain fields and doping levels within the graphene membrane and their characterization via spatially resolved confocal Raman spectroscopy; and (3) the ability to detect the mechanical coupling of the graphene sheet to the MEMS device with via their mechanical resonator eigenfrequencies.
Using graphene resonator, we perform electromechanical measurements in quantum Hall regime to probe the coupling between a quantum Hall (QH) system and its mechanical motion. Mechanically perturbing the QH state through resonance modifies the DC resistance of the system and results in a Fano-lineshape due to electronic interference. Magnetization of the system modifies the resonator's equilibrium position and effective stiffness leading to changes in resonant frequency. Our experiments show that there is an intimate coupling between the quantum Hall state and mechanics - electron transport is …
The tuning of electrical circuit resonance with a variable capacitor, or varactor, finds wide application with the most important being wireless telecommunication. We demonstrate an electromechanical graphene varactor, a variable capacitor wherein the capacitance is tuned by voltage controlled deflection of a dense array of suspended graphene membranes. The low flexural rigidity of graphene monolayers is exploited to achieve low actuation voltage in an ultra-thin structure. Large arrays comprising thousands of suspensions were fabricated to give a tunable capacitance of over 10 pF/mm$^2$, high…
Narrow gaps are formed in suspended single to few layer graphene devices using a pulsed electrical breakdown technique. The conductance of the resulting devices can be programmed by the application of voltage pulses, with a voltage of 2.5V~4.5V corresponding to an ON pulse and voltages ~8V corresponding to OFF pulses. Electron microscope imaging of the devices shows that the graphene sheets typically remain suspended and that the device conductance tends to zero when the observed gap is large. The switching rate is strongly temperature dependent, which rules out a purely electromechanical swit…
This study of elastic and plastic deformation of graphene, silicene, and boron nitride (BN) honeycomb nanoribbons under uniaxial tension determines their elastic constants and reveals interesting features. In the course of stretching in the elastic range, the electronic and magnetic properties can be strongly modified. In particular, it is shown that the band gap of a specific armchair nanoribbon is closed under strain and highest valance and lowest conduction bands are linearized. This way, the massless Dirac fermion behavior can be attained even in a semiconducting nanoribbon. Under plastic …
A suspended, doubly clamped single wall carbon nanotube is characterized as driven nano-electromechanical resonator at cryogenic temperatures. Electronically, the carbon nanotube displays small bandgap behaviour with Coulomb blockade oscillations in electron conduction and transparent contacts in hole conduction. We observe the driven mechanical resonance in dc-transport, including multiple higher harmonic responses. The data shows a distinct negative frequency tuning at finite applied gate voltage, enabling us to electrostatically decrease the resonance frequency to 75% of its maximum value. …
Electrostatic gating offers elegant ways to simultaneously strain and dope atomically thin membranes. Here, we report on a detailed \textit{in situ} Raman scattering study on graphene, suspended over a Si/SiO$_2$ substrate. In such a layered structure, the intensity of the Raman G- and 2D-mode features of graphene are strongly modulated by optical interference effects and allow an accurate determination of the electrostatically-induced membrane deflection, up to irreversible collapse. The membrane deflection is successfully described by an electromechanical model, which we also use to provide …
Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the first thermal switch based on a flexible, collapsible graphene membrane, with low operating voltage, < 2 V. We also employ active-mode scanning thermal microscopy (SThM) to measure the device behavior an…
Nanoelectromechanical systems (NEMS) constitute a class of devices lying at the interface between fundamental research and technological applications. Integrating novel materials such as graphene into NEMS allows studying their mechanical and electromechanical characteristics at the nanoscale and addressing fundamental questions such as electron-phonon interaction and bandgap engineering. In this work, we integrate single and bilayer graphene into NEMS and probe the interplay between their mechanical and electrical properties. We show that the deflection of monolayer graphene nanoribbons resul…
We report on the observation of periodic conductance oscillations near quantum Hall plateaus in suspended graphene nanoribbons. They are attributed to single quantum dots that form in the narrowest part of the ribbon, in the valleys and hills of a disorder potential. In a wide flake with two gates, a double-dot system's signature has been observed. Electrostatic confinement is enabled in single-layer graphene due to the gaps that form between Landau levels, suggesting a way to create gate-defined quantum dots that can be accessed with quantum Hall edge states.
We report a method for probing electromechanical properties of multiwalled carbon nanotubes(CNTs). This method is based on AFM measurements on a doubly clamped suspended CNT electrostatically deflected by a gate electrode. We measure the maximum deflection as a function of the applied gate voltage. Data from different CNTs scale into an universal curve within the experimental accuracy, in agreement with a continuum model prediction. This method and the general validity of the scaling law constitute a very useful tool for designing actuators and in general conducting nanowire-based NEMS.
We propose a water-immersed nucleobase-functionalized suspended graphene nanoribbon as an intrinsically selective device for nucleotide detection. The proposed sensing method combines Watson-Crick selective base pairing with graphene's capacity for converting anisotropic lattice strain to changes in an electrical current at the nanoscale. Using detailed atomistic molecular dynamics simulations, we study sensor operation at ambient conditions. We combine simulated data with theoretical arguments to estimate the levels of measurable electrical signal variation in response to strains and determin…
We study the influence of ripple waves originating from the electromechanical effects on spin relaxation caused by electromagnetic fields in armchair and zigzag graphene nanoribbons (GNRs). By utilizing analytical expressions supported by numerical simulations, we show that it is possible to tune the spin flip behaviors ON and OFF due to ripple waves in GNRs for potential applications in straintronic devices. This finding is similar to recently made observations on the design of spintronic devices in III-V semiconductor quantum dots, where the sign change in the effective Land$\mathrm{\acute{e…
We present a fabrication process for graphene-based devices where a graphene monolayer is suspended above a local metallic gate placed in a trench. As an example we detail the fabrication steps of a graphene field-effect transistor. The devices are built on a bare high-resistivity silicon substrate. At temperatures of 77~K and below, we observe the field-effect modulation of the graphene resistivity by a voltage applied to the gate. This fabrication approach enables new experiments involving graphene-based superconducting qubits and nano-electromechanical resonators. The method is applicable t…
We investigate the electronic transport properties of a bilayer graphene flake contacted by two monolayer nanoribbons. Such a finite-size bilayer flake can be built by overlapping two semiinfinite ribbons or by depositing a monolayer flake onto an infinite nanoribbon. These two structures have a complementary behavior, that we study and analyze by means of a tight-binding method and a continuum Dirac model. We have found that for certain energy ranges and geometries, the conductance of these systems oscillates markedly between zero and the maximum value of the conductance, allowing for the des…
We study the effect of SiC substrate on thermal conductivity of epitaxial graphene nanoribbons (GNRs) using the nonequilibrium molecular dynamics method. We show that the substrate has strong interaction with single-layer GNRs during the thermal transport, which largely reduces the thermal conductivity. The thermal conductivity characteristics of suspended GNRs are well preserved in the second GNR layers of bilayer GNR, which has a weak van der Waals interaction with the underlying structures. The out-of-plane phonon mode is found to play a critical role on the thermal conductivity variation o…
Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to integrate them in an electronic-like circuit. Here we report on the electroluminescence of individual GNRs suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate, c…
We have investigated electronic and magnetic properties of graphene nanodisks (nanosize triangular graphene) as well as electromechanical properties of graphene nanojunctions. Nanodisks are nanomagnets made of graphene, which are robust against perturbation such as impurities and lattice defects, where the ferromagnetic order is assured by Lieb's theorem. We can generate a spin current by spin filter, and manipulate it by a spin valve, a spin switch and other spintronic devices made of graphene nanodisks. We have analyzed nanodisk arrays, which have multi-degenerate perfect flat bands and are …
We investigate the low-field phonon-limited mobility in armchair graphene nanoribbons (GNRs) using full-band electron and phonon dispersion relations. We show that lateral confinement suppresses the intrinsic mobility of GNRs to values typical of common bulk semiconductors, and very far from the impressive experiments on 2D graphene. Suspended GNRs with a width of 1 nm exhibit a mobility close to 500 cm^2/Vs at room temperature, whereas if the same GNRs are deposited on HfO2 mobility is further reduced to about 60 cm^2/Vs due to surface phonons. We also show the occurrence of polaron formation…
Inspired by recent experiments where electron transport was measured across graphene nanoribbons (GNR) suspended between a metal surface and the tip of a scanning tunneling microscope [Koch \textit{et al}., Nat. Nanotechnol. {\bf 7}, 713 (2012)], we present detailed first-principles simulations of inelastic electron tunneling spectroscopy (IETS) of long pristine and defected armchair and zigzag nanoribbons under a range of charge carrier conditions. For the armchair ribbons we find two robust IETS signals around 169 and 196 mV corresponding to the D- and G-modes of Raman spectroscopy as well a…
We study nanoelectromechanical resonators fabricated from suspended flakes of NbSe$_2$ (thickness$\sim$30-50 nm) to probe charge density wave (CDW) physics at nanoscale. Variation of elastic and electronic properties accompanying the CDW phase transition (around 30 K) are investigated simultaneously using the devices as self-sensing heterodyne mixers. Elastic modulus is observed to change by 10 per cent, an amount significantly larger than what had been reported earlier in the case of bulk crystals. We also study the modulation of conductance by electric field effect, and examine its relation …
We analyze the thermal fluctuations of a narrow graphene nanoribbon. Using a continuum, membrane-like model we study the height-height correlation functions and the destabilization modes corresponding to two different boundaries conditions: ribbons which are fixed or free on the edges. For the first situation, the thermal spectrum has a gap and the correlations along the ribbon decay exponentially. Thermal fluctuations produce only local perturbations of the flat situation. However, the long range crystalline order is not distorted. For free edges, the situation changes as thermal excitations …
The interplay between uniaxial strain and charging effects in zigzag graphene nanoribbons (ZGNR) is investigated by using non-equilibrium Green's function formalism. The I-V characteristic curves and especially negative differential resistance (NDR) induced by some quantum selection rules are affected by the type, strength and also direction of the applied strain. For the oblique strain, the parity conservation fails while it conserves at the longitudinal and transverse strains. Therefore, in the oblique strain, on-off current ratio drastically decreases in compared to the un-strained case. Fo…
For the first time, intermodulation distortion of micro-electromechanical capacitive switches in the actuated state was analyzed both theoretically and experimentally. The distortion, although higher than that of switches in the suspended state, was found to decrease with increasing bias voltage but to depend weakly on modulation frequencies between 55 kHz and 1.1 MHz. This dependence could be explained by the orders-of-magnitude increase of the spring constant when the switches were actuated. Additionally, the analysis suggested that increasing the spring constant and decreasing the contact r…
Mechanical properties of a nanomechanical resonator have a significant impact on the performance of a resonant Nano-electromechanical system (NEMS) device. Here we study the mechanical properties of suspended membranes fabricated out of low-pressure chemical vapor deposited silicon nitride thin films. Doubly-clamped membranes of silicon nitride with thickness less than 50 nm and length varying from 5 um to 60 um were fabricated. The elastic modulus and stress in the suspended membranes were measured using Atomic Force Microscope (AFM)-based nanomechanical spectroscopy. The elastic modulus of t…
As the thinnest conductive and elastic material, graphene is expected to play a crucial role in post-Moore era. Besides applications on electronic devices, graphene has shown great potential for nano-electromechanical systems. While interlayer interactions play a key role in modifying the electronic structures of layered materials, no attention has been given to their impact on electromechanical properties. Here we report the positive piezoconductive effect observed in suspended bi- and multi-layer graphene. The effect is highly layer number dependent and shows the most pronounced response for…
Quantum confined devices that manipulate single electrons in graphene are emerging as attractive candidates for nanoelectronics applications. Previous experiments have employed etched graphene nanostructures, but edge and substrate disorder severely limit device functionality. Here we present a technique that builds quantum confined structures in suspended bilayer graphene with tunnel barriers defined by external electric fields that break layer inversion symmetry, thereby eliminating both edge and substrate disorder. We report clean quantum dot formation in two regimes: at zero magnetic field…
Length-independent quantum transport through topological band states of graphene nanoribbons
Université de Strasbourg（斯特拉斯堡大学）；CNRS（法国国家科学研究中心）；Empa - Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科技与工程研究所）；Max Planck Institute for Polymer Research（马克斯·普朗克聚合物研究所）；Johannes Gutenberg University Mainz（美因茨约翰内斯·古腾堡大学）；University of Bern（伯尔尼大学）；Donostia International Physics Center (DIPC) – UPV/EHU（圣塞巴斯蒂安国际物理中心（巴斯克国立大学））；IKERBASQUE, Basque Foundation for Science（伊克尔巴斯基克，巴斯克科学基金会）；Materials Genome Institute, Shanghai University（上海大学材料基因组研究院）；Department of Materials, University of Oxford（牛津大学材料系）
We use suspended graphene electromechanical resonators to study the variation of resonant frequency as a function of temperature. Measuring the change in frequency resulting from a change in tension, from 300 K to 30 K, allows us to extract information about the thermal expansion of monolayer graphene as a function of temperature, which is critical for strain engineering applications. We find that thermal expansion of graphene is negative for all temperatures between 300K and 30K. We also study the dispersion, the variation of resonant frequency with DC gate voltage, of the electromechanical m…
Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated to localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their …
Spin-hosting graphene nanostructures are promising metal-free systems for elementary quantum spintronic devices. Conventionally, spins are protected from quenching by electronic bandgaps, which also hinder electronic access to their quantum state. Here, we present a narrow graphene nanoribbon substitutionally doped with boron heteroatoms that combines a metallic character with the presence of localized spin 1/2 states in its interior. The ribbon was fabricated by on-surface synthesis on a Au(111) substrate. Transport measurements through ribbons suspended between the tip and the sample of a sc…
The development of nanoscale solid-state devices exploiting the promising topological surface states of topological insulator materials requires careful device engineering and improved materials quality. For instance, the introduction of a substrate, device contact or the formation of oxide layers can cause unintentional doping of the material, spoiling the sought-after properties. In support of this, nanoscale imaging tools can provide useful materials information without the need for complex device fabrication. Here we study Bi$_2$Se$_3$ nanoribbons suspended across multiple material stacks …
The ultrastrong coupling of single-electron tunneling and nanomechanical motion opens exciting opportunities to explore fundamental questions and develop new platforms for quantum technologies. We have measured and modeled this electromechanical coupling in a fully-suspended carbon nanotube device and report a ratio of $g_\mathrm{m}/ω_\mathrm{m} = 2.72 \pm 0.14$, where $g_\mathrm{m}/2π= 0.80\pm 0.04$ GHz is the coupling strength and $ω_\mathrm{m}/2π=294.5$ MHz is the mechanical resonance frequency. This is well within the ultrastrong coupling regime and the highest among all other electromecha…
Imaging the vibrations of nanomechanical resonators means measuring their flexural mode shapes from the dependence of their frequency response on in-plane position. Applied to two-dimensional resonators, this technique provides a wealth of information on the mechanical properties of atomically-thin membranes. We present a simple and robust system to image the vibrations of few layer graphene (FLG) resonators at room temperature and in vacuum with an in-plane displacement precision of $\approx0.20$ $μ$m. It consists of a sturdy vacuum enclosure mounted on a three-axis micropositioning stage and…
A yet unexplored area in graphene electronics is the field of quantum ballistic transport through graphene nanostructures. Recent developments in the preparation of high mobility graphene are expected to lead to the experimental verification and/or discovery of many new quantum mechanical effects in this field. Examples are effects due to specific graphene edges, such as spin polarization at zigzag edges of a graphene nanoribbon and the use of the valley degree of freedom in the field of graphene valleytronics8. As a first step in this direction we present the observation of quantized conducta…
Graphene-based electromechanical resonators have attracted much interest recently because of the outstanding mechanical and electrical properties of graphene and their various applications. However, the coupling between mechanical motion and charge transport has not been explored in graphene. Here, we studied the mechanical properties of a suspended 50-nm-wide graphene nanoribbon, which also acts as a single-electron transistor (SET) at low temperature. Using the SET as a sensitive detector, we found that the resonance frequency could be tuned from 82 MHz to 100 MHz and the quality factor exce…
Using atomistic simulations we investigate the morphological properties of graphene deposited on top of a nanostructured substrate. Sinusoidally corrugated surfaces, steps, elongated trenches, one dimensional and cubic barriers, spherical bubbles, Gaussian bump and Gaussian depression are considered as support structures for graphene. The graphene-substrate interaction is governed by van der Waals forces and the profile of the graphene layer is determined by minimizing the energy using molecular dynamics simulations. Based on the obtained optimum configurations, we found that: (i) for graphene…
