We report on the structural and magnetic characterization of (110) and (001) La2/3Ca1/3MnO3 (LCMO) epitaxial thin films simultaneously grown on (110) and (001)SrTiO3 substrates, with thicknesses t varying between 8 nm and 150 nm. It is found that while the in-plane interplanar distances of the (001) films are strongly clamped to those of the substrate and the films remain strained up to well above t=100 nm, the (110) films relax much earlier. Accurate determination of the in-plane and out-of-plane interplanar distances has allowed concluding that in all cases the unit cell volume of the manganite reduces gradually when increasing thickness, approaching the bulk value. It is observed that the magnetic properties (Curie temperature and saturation magnetization) of the (110) films are significantly improved compared to those of (001) films. These observations, combined with 55Mn-nuclear magnetic resonance data and X-ray photoemission spectroscopy, signal that the depression of the magnetic properties of the more strained (001)LCMO films is not caused by an elastic deformation of the perovskite lattice but rather due to the electronic and chemical phase separation caused by the substrate-induced strain. On the contrary, the thickness dependence of the magnetic properties of the less strained (110)LCMO films are simply described by the elastic deformation of the manganite lattice. We will argue that the different behavior of (001) and (110)LCMO films is a consequence of the dissimilar electronic structure of these interfaces.
An incommensurate phase refers to a solid state in which the period of a superstructure is incommensurable with the primitive unit cell. Recently the incommensurate phase is induced by applying an in-plane strain to hexagonal manganites, which demonstrates single chiral modulation of six domain variants. Here we employ Landau theory in combination with the phase-field method to investigate the incommensurate phase in hexagonal manganites. It is shown that the equilibrium wave length of the incommensurate phase is determined by temperature and the magnitude of the applied strain, and a temperat…
The single phase polycrystalline Ba1/4Sr3/4MnO3 layered perovskite manganite has been synthesized by combustion method having various crystallite sizes. The room temperature X-ray diffraction patterns reveal that Ba1/4Sr3/4MnO3 crystallizes into hexagonal crystal structure with space group P63/mmc as confirmed by Rietveld refinement. The scanning electron micrographs of Ba1/4Sr3/4MnO3 reveal uniform crystallite size of the samples. Effect of crystallite size on lattice strain and crystal structure has been studied using Rietveld refinement and Williamson-Hall plot, respectively. The structural…
The magnetic and magnetotransport properties of single crystalline La1-x-yPryCaxMnO3 (x=0.42, y=0.40) thin films (~140 nm) deposited on (110) oriented LaAlO3 and SrTiO3 substrates exhibit a crossover from the high temperature antiferromagnetic-charge ordered insulator (AFM-COI) phase (T>TN) to strain glass (T<Tg). At intermediate temperatures (Tg<T<TN) dynamical liquid having prominent thermal-magneto-resistive hysteresis dominates in the cooling cycle, while in the warming cycle it is preceded by ferromagnetic metal (FMM) phase. Magnetic field required to drive AFM-COI to FMM phase transition…
Using first-principles calculations, we show that the (001) surface of the ferromagnet La$_{1-x}$Sr$_{x}$MnO$_{3}$ under epitaxial compression favors antiferromagnetic ordering in the first few surface layers, coexisting with ferromagnetic bulk order. The change in magnetic order is accompanied by a marked surface-related spectral pseudogap, signaling a metal-insulator near-transition at the surface. All surfaces exhibit huge outward relaxations an rumpling of the MnO$_{2}$ and LaO surface planes, causing a distinct shift in work function. The AF phase is an extreme surface-assisted case of th…
We show that applying strain on half-doped manganites makes it possible to tune the system to the proximity of a metal-insulator transition and thereby generate a colossal magnetoresistance (CMR) response. This phase competition not only allows control of CMR in ferromagnetic metallic manganites but can be used to generate CMR response in otherwise robust insulators at half-doping. Further, from our realistic microscopic model of strain and magnetotransport calculations within the Kubo formalism, we demonstrate a striking result of strain engineering that, under tensile strain, a ferromagnetic…
The highly anisotropic resistivities in strained manganites are theoretically studied using the two-orbital double-exchange model. At the nanoscale, the anisotropic double-exchange and Jahn-Teller distortions are found to be responsible for the robust anisotropic resistivities observed here via Monte Carlo simulations. An unbalanced in the population of orbitals caused by strain is responsible for these effects. In contrast, the anisotropic superexchange is found to be irrelevant to explain our results. Our model study suggests that highly anisotropic resistivities could be present in a wide r…
We present a detailed study of a model for strain-induced metal-insulator phase coexistence in perovskite manganites. Both nanoscale and mesoscale inhomogeneities are self-consistently described using atomic scale modes and their associated constraint equations. We also examine the stability of domain configurations against uniform and nonuniform modifications of domain walls. Our results show that the long range interactions between strain fields and the complex energy landscape with multiple metastable states play essential roles in stabilizing metal-insulator phase coexistence, as observed …
To understand the near-interface magnetism in manganites, uniform, ultra-thin films of La_{0.67}Sr_{0.33}MnO_3 were grown epitaxially on single crystal (001) LaAlO_3 and (110) NdGaO_3 substrates. The temperature and magnetic field dependent film resistance is used to probe the film's structural and magnetic properties. A surface and/or interface related dead-layer is inferred from the thickness dependent resistance and magnetoresistance. The total thickness of the dead layer is estimated to be $\sim 30 Å$ for films on NdGaO_3 and $\sim 50 Å$ for films on LaAlO_3.
In a manganite film without quenched disorder, we show texturing in the form of insulating and metallic stripes above and below Curie temperature (Tc), respectively, by high resolution scanning tunneling microscopy/spectroscopy (STM/STS). The formation of these stripes involves competing orbital and charge orders, and are an outcome of overlapping electron wave-functions mediated by long-range lattice strain. Contrary to popular perception, electronically homogeneous stripe phase underlines the efficacy of the lattice strain in bringing about charge density modulation and in impeding the cross…
Insertion of layers displaying field-induced metal-to-insulator (M/I) transition in ferroelectric tunnel junctions (FTJs) has received attention as a potentially useful way to enlarge junction tunnel electroresistance (TER). Half-doped manganites being at the verge of metal-insulator character are thus good candidates to be slave layers in FTJs. However, the phase diagram of these oxides is extremely sensitive to strain and thus can be radically different when integrated in epitaxial FTJs. Here we report a systematic study of large-area (A = 4 to 100 um2) Pt/La0.5Sr0.5MnO3/BaTiO3/La0.7Sr0.3MnO…
Fundamental understanding of interfacial magnetic properties in ferromagnetic heterostructures is essential to utilize ferromagnetic materials for spintronic device applications. In this paper, we investigate the interfacial magnetic and electronic structures of epitaxial single-crystalline LaAlO$_3$ (LAO)/La$_{0.6}$Sr$_{0.4}$MnO$_3$ (LSMO)/Nb:SrTiO$_3$ (Nb:STO) heterostructures with varying LSMO-layer thickness, in which the magnetic anisotropy strongly changes depending on the LSMO thickness due to the delicate balance between the strains originating from both the Nb:STO and LAO layers, usin…
Exchange bias has been studied in a series of La2/3Ca1/3MnO3 / La1/3Ca2/3MnO3 bilayers grown on (001) SrTiO3 substrates by ozone-assisted molecular beam epitaxy. The high crystalline quality of the samples and interfaces has been verified using high-resolution X-ray diffractometry and Z-contrast scanning transmission electron microscopy with electron energy loss spectroscopy. The dependence of exchange bias on the thickness of the antiferromagnetic layer has been investigated. A critical value for the onset of the hysteresis loop shift has been determined. An antiferromagnetic anisotropy const…
Thickness dependence and strain effects in films of $La_{1-x}A_xMnO_3$ perovskites are analyzed in the colossal magnetoresistance regime. The calculations are based on a generalization of a variational approach previously proposed for the study of manganite bulk. It is found that a reduction in the thickness of the film causes a decrease of critical temperature and magnetization, and an increase of resistivity at low temperatures. The strain is introduced through the modifications of in-plane and out-of-plane electron hopping amplitudes due to substrate-induced distortions of the film unit cel…
Complex many-body interaction in perovskite manganites gives rise to a strong competition between ferromagnetic metallic and charge ordered phases with nanoscale electronic inhomogeneity and glassy behaviors. Investigating this glassy state requires high resolution imaging techniques with sufficient sensitivity and stability. Here, we present the results of a near-field microwave microscope imaging on the strain driven glassy state in a manganite film. The high contrast between the two electrically distinct phases allows direct visualization of the phase separation. The low temperature microsc…
Multiferroic rare earth manganites attracted recent attention because of the coexistence of different types of magnetic and ferroelectric orders resulting in complex phase diagrams and a wealth of physical phenomena. The coupling and mutual interference of the different orders and the large magnetoelectric effect observed in several compounds are of fundamental interest and bear the potential for future applications in which the dielectric (magnetic) properties can be modified by the onset of a magnetic (dielectric) transition or the application of a magnetic (electric) field. The physical mec…
Thin films of orthorhombic TbMnO3, as well as other orthorhombic manganites, epitaxially grown on cubic SrTiO3 substrates display an induced magnetic moment that is absent in the bulk (antiferromagnetic) counterpart. Here we show that there is a clear correlation between the domain microstructure and the induced magnetic moment in TbMnO3 films on SrTiO3. In addition, the distinct dependence of the magnetization with the film thickness is not consistent with domain magnetism and indicates that the domain walls, rather than the domains, are the origin of the net magnetic moment. Since the orient…
Strong correlated manganites are still under intense research owing to their complex phase diagrams in terms of the Sr-doping and their sensitivity to intrinsic and extrinsic structural deformations. Here, we performed x-ray absorption spectroscopy measurements of manganites bilayers to explore the effects that a local Sr-doping gradient produce on the charge and antiferromagnetic anisotropies. In order to gradually tune the Sr-doping level along the axis perpendicular to the samples we have grown a series of bilayers with different thicknesses of low-doped manganites (from 0 nm to 6 nm) depos…
We present a model artificial multiferroic system consisting of a (011)-oriented ferroelectric Pb(Mg,Nb,Ti)O$_3$ substrate intimately coupled to a ferromagnetic (La,Sr)MnO$_3$ film through epitaxial strain and converse piezoelectric effects. Electric field pulse sequences of less than 6 kV/cm were shown to induce large reversible and bistable remanent strains in the manganite film. Magnetic hysteresis loops demonstrate that the changes in strain states result in significant changes in magnetic anisotropy from a highly anisotropic two-fold magnetic symmetry to a more isotropic one. Such changes…
Structural features of ferroic domains are fundamentally important for the understanding of microstructure and physical properties of ferroic materials, and they are also of technological significance for information storage and electronic switches. There are three well-known forms of ferroic orders in correlation with the spontaneous magnetization, electric polarization, and spontaneous strain, respectively. Ferroelectricity often accompanies ferroelastic strain, so ferroelectric domains tend to form in simple elongated configurations. However, due to strong boundary conditions, ferroelectric…
A major challenge in condensed matter physics is active control of quantum phases. Dynamic control with pulsed electromagnetic fields can overcome energetic barriers enabling access to transient or metastable states that are not thermally accessible. Here we demonstrate strain-engineered tuning of La2/3Ca1/3MnO3 into an emergent charge-ordered insulating phase with extreme photo-susceptibility where even a single optical pulse can initiate a transition to a long-lived metastable hidden metallic phase. Comprehensive single-shot pulsed excitation measurements demonstrate that the transition is c…
Interface-dominated materials such as nanocrystalline thin films have emerged as an enthralling class of materials able to engineer functional properties of transition metal oxides widely used in energy and information technologies. In particular, it has been proved that strain-induced defects in grain boundaries of manganites deeply impact their functional properties by boosting their oxygen mass transport while abating their electronic and magnetic order. In this work, the origin of these dramatic changes is correlated for the first time with strong modifications of the anionic and cationic …
Recent atomic pair distribution function results from our group from manganites and cuprate systems are reviewed in light of the presence of multi-scale structures. These structures have a profound effect on the material properties
In this paper we have created a strain driven single crystal like ferromagnetic insulating (FMI) state in a PLD grown thin film of low doped LCMO(X = 0.15)on NGO(100) substrate and make a thorough study of strain effects on the electric and magnetic transport of this film. We have studied and compared the FMI state, ferromagnetic transition temperature (TC), ferromagnetic insulating temperature (TFMI) and the resistivity of the film in details with bulk single crystals of X=0.18 to 0.22 doping region. We have found that TFMI and the localisation length of the carriers are increased and there i…
Transport and magnetic properties of LSMO manganite thin films and bicrystal junctions were investigated. Manganite films were epitaxially grown on STO, LAO, NGO and LSAT substrates and their magnetic anisotropy were determined by two techniques of magnetic resonance spectroscopy. Compare with cubic substrates a small (about 0.3 persentage), the anisotropy of the orthorhombic NGO substrate leads to a uniaxial anisotropy of the magnetic properties of the films in the plane of the substrate. Samples with different tilt of crystallographic basal planes of manganite as well as bicrystal junctions …
We report a modulation of the in-plane magnetotransport in artificial manganite superlattice (SL) [(NdMnO3)n /(SrMnO3)n /(LaMnO3)n]m by varying the layer thickness n while keeping the total thickness of the structure constant. Charge transport in these heterostructures is confined to the interfaces and occurs via variable range hopping (VRH). Upon increasing n, the interfacial separation rises, leading to a suppression of the electrostatic screening between carriers of neighboring interfaces and the opening of a Coulomb gap at the Fermi level (EF). The high-field magnetoresistance (MR) is univ…
The coupling between the electrical transport properties of La2/3Sr1/3MnO3 (LSMO) thin films and structural phase transitions of SrTiO3 (STO) substrates at Ts = 105 K has been investigated. We found that the electrical resistivity of LSMO films exhibit a cusp at Ts, which is greatly amplified by tuning films to the verge of metallic and insulating phases, i.e., to the boundary of two delicate competing electronic states. Our results demonstrate that small amounts of strain can tip the subtle balance of competing interactions and tune the electronic properties in correlated electron materials.
We investigate MCA of CoFe(011) thin films as a function of strength of strain and film thickness has been studied. It is elucidated that perpendicular magnetocystalline anisotropy (MCA) energy (EMCA) is getting stronger with compressed xy-plane lattice constant while in-plane MCA is become an easy-axis by tensile strain on xy-plane. The reason of the EMCA behaviors can be explained by features of electronic structures.
We present the temperature- and thickness-dependent structural and morphological evolution of strain induced transformations in highly-strained epitaxial BiFeO3 films deposited on LaAlO3 (001) substrates. Using high-resolution X-ray diffraction and temperature-dependent scanning-probe-based studies we observe a complex temperature- and thickness-dependent evolution of phases in this system. A thickness-dependent transformation from a single monoclinically distorted tetragonal-like phase to a complex mixed-phase structure in films with thicknesses up to ~200 nm is the consequence of a strain-in…
We have used oxygen ions irradiation to generate controlled structural disorder in thin manganite films. Conductive atomic force microscopy CAFM), transport and magnetic measurements were performed to analyze the influence of the implantation process in the physical properties of the films. CAFM images show regions with different conductivity values, probably due to the random distribution of point defect or inhomogeneous changes of the local Mn3+/4+ ratio to reduce lattice strains of the irradiated areas. The transport and magnetic properties of these systems are interpreted in this context. …
A detailed nanoscale structural characterization was performed on high-quality La0.66Sr0.33MnO3 (LSMO) thin films of different thicknesses and deposited by pulsed laser deposition onto buffered Si (100) substrates. A multilayered structure built of Y0.13Zr0.87O2 (YSZ) and CeO2 layers was used as buffer in order to optimize the manganite films growth. The stacking of the different layers, their morpholohy, composition and strains were analysed using different experimental techniques. In-situ characterization of the films, performed with reflection high-energy electron diffraction, revealed thei…
Magneto-optic Kerr effect can probe the process of magnetization reversal in ferromagnetic thin films and thus be used as an alternative to magnetometry. Kerr effect is wavelength-dependent and the Kerr rotation can reverse sign, vanishing at particular wavelengths. We investigate epitaxial heterostructures of ferromagnetic manganite, La$_{0.7}$Sr$_{0.3}$Mn$_{0.9}$Ru$_{0.1}$O$_3$, by polar Kerr effect and magnetometry. The manganite layers are separated by or interfaced with a layer of nickelate, NdNiO$_3$. Kerr rotation hysteresis loops of trilayers, with two manganite layers of different thi…
We investigate the influence of a well-defined reversible biaxial strain <=0.12 % on the magnetization (M) of epitaxial ferromagnetic manganite films. M has been recorded depending on temperature, strain and magnetic field in 20 - 50 nm thick films. This is accomplished by reversibly compressing the isotropic in-plane lattice parameter of the rhombohedral piezoelectric 0.72PMN-0.28PT (001) substrates by application of an electric field E <= 12 kV cm-1. The magnitude of the total variable in-plane strain has been derived. Strain-induced shifts of the ferromagnetic Curie temperature (Tc) of up t…
We report about La0.67Sr0.33MnO3 single crystal manganite thin films in interaction with a gold capping layer. With respect to uncoated manganite layers of the same thickness, Au-capped 4 nm-thick manganite films reveal a dramatic reduction (about 185 K) of the Curie temperature TC and a lower saturation low-temperature magnetization M0. A sizeable TC reduction (about 60 K) is observed even when an inert SrTiO3 layer is inserted between the gold film and the 4 nm-thick manganite layer, suggesting that this effect might have an electrostatic origin.
The effect of 3-dimensional strain state on the magnetocaloric properties of epitaxial La0.8Ca0.2MnO3 (LCMO) thin films grown on two types of substrates, SrTiO3 (001) (STO) and LaAlO3 (001) (LAO) has been studied as a function of film thickness within the range of 25 to 300 nm. The STO substrate imposes an in-plane tensile biaxial strain while LAO substrate imposes an in-plane compressive biaxial strain. The in-plane biaxial strain on LCMO by STO substrate gets relaxed more rapidly than that by LAO substrate but both LCMO/STO and LCMO/LAO show a maximum entropy change of 12.1 J/Kg-K and 3.2 J/…
The structural stability, electronic structure, and thermal transport properties of one to six quintuple layers (QLs) of Bi2Se3 are investigated by van der Waals density functional theory and semi-classical Boltzmann theory. The bandgap amounts to 0.41 eV for a single QL and reduces to 0.23 eV when the number of QLs increases to six. A single QL has a significantly higher thermoelectric figure of merit (0.27) than the bulk material (0.10), which can be further enhanced to 0.30 by introducing 2.5% compressive strain. Positive phonon frequencies under strain indicate that the structural stabilit…
X-ray analysis of ferroelectric thin layers of Ba1/2Sr1/2TiO3 with different thickness reveals the presence of internal strain gradients across the film thickness and allows us to propose a functional form for the internal strain profile. We use this to calculate the direct influence of strain gradient, through flexoelectric coupling, on the degradation of the ferroelectric properties of thin films with decreasing thickness, in excellent agreement with the observed behaviour. This work highlights the link between strain relaxation and strain gradients in epitaxial films, and shows the pressing…
The discovery of ferroelectric polarization in HfO2-based ultrathin films has spawned a lot of interest due to their potential applications in data storage. Recently, a new R3m rhombohedral phase was proposed to be responsible for the emergence of ferroelectricity in the [111]-oriented Hf0.5Zr0.5O2 thin films, but the fundamental mechanism of ferroelectric polarization in such films remains poorly understood. In this paper, we employ density-functional-theory calculations to investigate structural and polarization properties of the R3m HfO2 phase. We find that the film thickness and in-plane c…
The ferromagnetic properties of epitaxial La$_{0.5}$Sr$_{0.5}$CoO$_3$ thin films have been studied. The magnetic transition is affected by both strain and finite thickness. We have used a series of films of different thickness and on different substrates in order to quantitatively determine the change in Curie temperature contributed by each effect. The phase diagram of T$_C$ versus in-plane strain suggests that the ferromagnetic transition temperature is suppressed by tensile strain and enhanced by compressive strain. The general method of separating strain and finite thickness effects should…
We measured the magnetization depth profile of a (La1-xPrx)1-yCayMnO3 (x = 0.60\pm0.04, y = 0.20\pm0.03) film as a function of applied bending stress using polarized neutron reflectometry. From these measurements we obtained a coupling coefficient relating strain to the depth dependent magnetization. We found application of compressive (tensile) bending stress along the magnetic easy axis increases (decreases) the magnetization of the film.
In strongly correlated electronic systems, such as manganites, the global transport behavior depends sensitively on the spin ordering, whose alteration often requires a large external magnetic field. Here we show that the spin ordering in manganites can be easily controlled by exchange field across the interface between a ferromagnet and a manganite. By depositing isolated ferromagnetic nanodots on a manganite thin film, we find that it is possible to overcome dimensionality and strain effects to raise the metal-insulator transition (MIT) temperature by over 200 K and increase the magnetoresis…
We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator Tm3Fe5O12 films grown with pulsed laser deposition on substituted-Gd3Ga5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room temperature. When a thin Cu layer is inserted between Pt and TIG, the Hall hysteresis magnitude decays but stays finite as the thickness of Cu increases up to 5 nm. However, if the Cu layer is placed atop …
We report on the dielectric properties of epitaxial [001] and [100]-textured thin films of antiferromagnetic orthorhombic YMnO3 and their variation under compressive epitaxial strain. It is found that weakly strained YMnO3 films are ferroelectric with a polarization along c-axis switchable by 90 degrees by an external magnetic field. When reducing film thickness and increasing epitaxial strain, the ferroelectric order is progressively suppressed. Analysis of structural, dielectric and magnetic data indicates that suppression of ferroelectricity when reducing thickness is accompanied by an enla…
In this work we are investigating the effect of strain in ultrathin Mn-Ga thin films on the magnetic properties at room temperature. Two different Mn-Ga compositions of which one is furthermore doped with Co were grown on Cr buffered MgO (001) substrates. Films with a thickness below 12nm are highly strained and it was observed that the ratio c/a vs. thickness is depending on composition. Using c/a as an order parameter the PMA is shown to be drastically reduced with increasing strain. These findings should be considered when generalizing and downscaling results obtained from films >20nm. Furt…
We report a high-pressure study of orthorhombic rare-earth manganites AMnO3 using Raman scattering (for A = Pr, Nd, Sm, Eu, Tb and Dy) and synchrotron X-ray diffraction (for A = Pr, Sm, Eu, and Dy). In all cases, a structural and insulator-to-metal transition was evidenced, with a critical pressure that depends on the A-cation size. We analyze the compression mechanisms at work in the different manganites via the pressure dependence of the lattice parameters, the shear strain in the a-c plane, and the Raman bands associated with out-of-phase MnO6 rotations and in-plane O2 symmetric stretching …
We carried out matched experiments and molecular dynamics simulations of the compression of nanopillars prepared from Cu$\vert$Au nanolaminates with 25 nm layer thickness. The stress-strain behavior obtained from both techniques are in excellent agreement. Variation of the layer thickness in simulations reveals an increase of the strength with decreasing layer thickness. Pillars fail through the formation of shear bands whose nucleation we trace back to the existence of surface flaws. Our combined approach demonstrates the crucial role of contact geometry in controlling the deformation mode an…
We investigate the electronic reconstruction at the interface between ferromagnetic metallic (FM) and antiferromagnetic insulating (AFI) manganites in superlattices using a two-orbital double-exchange model including superexchange interactions, Jahn-Teller lattice distortions, and long range Coulomb interactions. The magnetic and the transport properties critically depend on the thickness of the AFI layers. We focus on superlattices where the constituent parent manganites have the same electron density n = 0.6. The induced ferromagnetic moment in the AFI layers decreases monotonically with inc…
In addition to mechanisms already proposed to account for the formation in manganites of a small-polaron superlattice above the Curie temperature Tc and to a metallic-like sea of large polarons below Tc, we now consider other observed colossal-resistance inducing fields, such as magnetic, electric, photon, or strain fields. We attribute the charge-ordered phase formation to the occurrence of strong dipolar binding of vibronic small polarons arising from the phonon coupling of highly polarizable two-level orbital systems. These species having associated inherent electric and magnetic off-center…
Mixed-valence perovskite manganites (Re$_{1-x}$A$_{x}$MnO$_{3}$ where Re=rare earth, A=alkaline earth) provide a unique opportunity to study the relationships between the structure and the magnetotransport properties due to an interplay among charge carriers, magnetic coupling, orbital ordering and structural distortion. This makes these compounds very exciting from both the basic research and from the technological view point. As the technology pursued with these materials requires film growth, extensive studies have been made on materials synthesis, structural and physical characterization a…
Transport characterizations of epitaxial La0.7Sr0.3MnO3 thin films in the thickness range 5-40 nm and 25-410 K temperature interval have been accurately collected. We show that taking into account polaronic effects allows to achieve the best ever fitting of the transport curves in the whole temperature range. The Current Carriers Density Collapse picture accurately accounts for the properties variation across the metal-insulator-transition. The electron-phonon coupling parameter estimations are in a good agreement with theoretical predictions. The results promote a clear and straightforward qu…
We report a strong thickness dependence of the complex frequency-dependent optical dielectric function in epitaxial CaMnO3(001) thin films on SrTiO3(001), LaAlO3(001), and SrLaAlO4(001) substrates. A doubling of the peak value of the imaginary part of the dielectric function and spectral shifts of 0.5 eV for a given magnitude of absorption are observed. On the basis of the experimental data and first-principles density functional theory calculations of the dielectric function, its evolution with thickness from 4 to 63 nm has several regimes. In the thinnest, strain-coherent films, the response…
Recently, hexagonal boron nitride (hBN) layers have generated a lot of interest as ideal substrates for 2D stacked devices. Sapphire-supported thin hBN films of different thicknesses are grown using metalorganic vapour phase epitaxy technique by following a flow modulation scheme. Though these films of relatively large size are potential candidates to be employed in designing real devices, they exhibit wrinkling. The formation of wrinkles is a key signature of strain distribution in a film. Raman imaging has been utilized to study the residual strain distribution in these wrinkled hBN films. A…
We propose a physical model which explains the existence of finite thickness wetting layers in epitaxially strained films. The finite wetting layer is shown to be stable due to the variation of the non-linear elastic free energy with film thickness. We show that anisotropic surface tension gives rise to a metastable enlarged wetting layer. The perturbation amplitude needed to destabilize this wetting layer decreases with increasing lattice mismatch. We observe the development of faceted islands in unstable films.
The control of magnetization via the application of an electric field, known as magnetoelectric coupling, is among the most fascinating and active research areas today. In addition to fundamental scientific interest, magnetoelectric effects may lead to new device concepts for data storage and processing. There are several known mechanisms for magnetoelectric coupling that include intrinsic effects in single-phase materials, strain induced coupling in two-phase composites, and electronically-driven effects at interfaces. Here we explore a different type of magnetoelectric effect at a ferromagne…
Using first principle calculations we showed that the Curie temperature of manganites thin films can be increased by far more than an order of magnitude by applying appropriate strains. Our main breakthrough is that the control of the orbital ordering responsible for the spectacular $T_C$ increase cannot be imposed by the substrate only. Indeed, the strains, first applied by the substrate, need to be maintained over the growth direction by the alternation of the manganite layers with another appropriate material. Following these theoretical findings, we synthesized such super-lattices and veri…
Electrical manipulation of lattice, charge, and spin has been realized respectively by the piezoelectric effect, field-effect transistor, and electric field control of ferromagnetism, bringing about dramatic promotions both in fundamental research and industrial production. However, it is generally accepted that the orbital of materials are impossible to be altered once they have been made. Here we use electric-field to dynamically tune the electronic phase transition in (La,Sr)MnO3 films with different Mn^4+/(Mn^3+ + Mn^4+) ratios. The orbital occupancy and corresponding magnetic anisotropy o…
