The measurability by means of continuous measurements, of an observable $\A(t_0)$, at an instant, and of a time averaged observable, $\bar \A=1/T\int \A(t')dt'$, is examined for linear and in particular for non-linear quantum mechanical systems. We argue that only when the exact (non-perturbative) solution is known, an exact measurement may be possible. A perturbative approach is shown to fail in the non-linear case for measurements with accuracy $Δ\bar \A < Δ\bar \A_{min}(T)$, giving rise to a restriction on the accuracy. Thus, in order to prepare an initial pure state of a non-linear system, by means of a continuous measurement, the exact non-perturbative solution must be known.
The conceptual relation between the measurability of quantum mechanical observables and the computability of numerical functions is re-examined. A new formulation is given for the notion of measurability with finite precision in order to reconcile the conflict alleged by M. A. Nielsen [Phys. Rev. Lett. 79, 2915 (1997)] that the measurability of a certain observable contradicts the Church-Turing thesis. It is argued that any function computable by a quantum algorithm is a recursive function obeying the Church-Turing thesis, whereas any observable can be measured in principle.
We show how to construct loss-tolerant linear steering inequalities using a generic set of von Neumann measurements that are violated by $d$-dimensional states, and that rely only upon a simple property of the set of measurements used (the maximal overlap between measurement directions). Using these inequalities we show that the critical detection efficiency above which $n$ von Neumann measurements can demonstrate steering is $1/n$. We show furthermore that using our construction and high dimensional states allows for steering demonstrations which are also highly robust to depolarising noise a…
In this work, we investigate the joint measurability of quantum effects and connect it to the study of free spectrahedra. Free spectrahedra typically arise as matricial relaxations of linear matrix inequalities. An example of a free spectrahedron is the matrix diamond, which is a matricial relaxation of the $\ell_1$-ball. We find that joint measurability of binary POVMs is equivalent to the inclusion of the matrix diamond into the free spectrahedron defined by the effects under study. This connection allows us to use results about inclusion constants from free spectrahedra to quantify the degr…
Taking the view that computation is after all physical, we argue that physics, particularly quantum physics, could help extend the notion of computability. Here, we list the important and unique features of quantum mechanics and then outline a quantum mechanical "algorithm" for one of the insoluble problems of mathematics, the Hilbert's tenth and equivalently the Turing halting problem. The key element of this algorithm is the {\em computability} and {\em measurability} of both the values of physical observables and of the quantum-mechanical probability distributions for these values.
The question of quantifying the sharpness (or unsharpness) of a quantum mechanical effect is investigated. Apart from sharpness, another property, bias, is found to be relevant for the joint measurability or coexistence of two effects. Measures of bias will be defined and examples given.
Generalised dichotomic quantum measurements are fully characterised by two real parameters, dubbed as sharpness parameter and biasedness parameter. The trade-off between the degree of joint measurability, sharpness and biasedness of generalised measurements was known in the case of pairs of qubit observables. In the present work we generalise the notion of sharpness and biasedness measure of multi-outcome generalised measurements pertaining to multilevel systems. A trade-off between the amount of quantum mechanical (QM) violation of macrorealism (MR), sharpness and biasedness is established. S…
We demonstrate that quantum incompatibility can always be detected by means of a state discrimination task with partial intermediate information. This is done by showing that only incompatible measurements allow for an efficient use of premeasurement information in order to improve the probability of guessing the correct state. Thus, the gap between the guessing probabilities with pre- and postmeasurement information is a witness of the incompatibility of a given collection of measurements. We prove that all linear incompatibility witnesses can be implemented as some state discrimination proto…
The solution of the time-dependent Schrödinger equation is discussed for a particle confined in half-space $x>0$ with a linear potential $V(x)=Kx$ in the following situations: (a) sudden removal of the wall and switching on the linear potential $V(x)=Kx$ at $x \leq 0$, (b) sudden removal of the wall and the potential and (c) sudden removal of the potential. A brief discussion of the quantum statistic is presented.
The generation of entangled states that display negative values of the Wigner function in the quantum phase space is a challenging task, particularly elusive for massive, and possibly macroscopic, systems such as mechanical resonators. In this work, we propose two schemes based on reservoir engineering for generating Wigner-negative entangled states unconditionally. We consider two non-interacting mechanical resonators that are radiation-pressure coupled to either one or two common cavity fields; the optomechanical coupling with the field(s) features both a linear and quadratic part in the mec…
The ability to engineer both linear and non-linear coupling with a mechanical resonator is an important goal for the preparation and investigation of macroscopic mechanical quantum behavior. In this work, a measurement based scheme is presented where linear or square mechanical displacement coupling can be achieved using the optomechanical interaction linearly proportional to the mechanical position. The resulting square displacement measurement strength is compared to that attainable in the dispersive case using the direct interaction to the mechanical displacement squared. An experimental pr…
A number of new L$\acute{e}$vi-Leblond type equations admitting four component spinor solutions have been proposed. The pair of linearized equations thus obtained in each case lead to Hamiltonians with characteristic features like L-S coupling and supersymmetry. The relevant momentum operators have often been understood in terms of Clifford algebraic bases producing Schr$\ddot{o}$dinger Hamiltonians with L-S coupling. As for example Hamiltonians representing Rashba effect or three dimensional harmonic oscillator have been constructed. The supersymmetric nature of one dimensional oscillator has…
Precision measurement of non-linear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interactions and measurement, but observation of non-linear mechanical degrees-of-freedom remains outstanding. Here we report the observation of displacement-squared thermal motion of a micro-mechanical resona…
We provide a quantum analysis of a DC SQUID mechanical displacement detector within the sub-critical Josephson current regime. A segment of the SQUID loop forms the mechanical resonator and motion of the latter is transduced inductively through changes in the flux threading the loop. Expressions are derived for the detector signal response and noise, which are used to evaluate the position and force detection sensitivity. We also investigate cooling of the mechanical resonator due to back reaction noise from the detector.
It is known that placing a mechanical oscillator in a superposition of coherent states allows, in theory, a measurement of a linear force whose sensitivity increases with the amplitude of the mechanical oscillations, a uniquely quantum effect. Further, entangled versions of these states across a network of $n$ mechanical oscillators enables a measurement whose sensitivity increases linearly with $n$, thus improving over the classical scaling by $\sqrt{n}$. One of the key challenges in exploiting this effect is processing the signal so that it can be readily measured; linear processing is insuf…
We investigate theoretically in detail the non-linear effects in the response of an optical/microwave cavity coupled to a Duffing mechanical resonator. The cavity is driven by a laser at a red or blue mechanical subband, and a probe laser measures the reflection close to the cavity resonance. Under these conditions, we find that the cavity exhibits optomechanically induced reflection (OMIR) or absorption (OMIA) and investigate the optomechanical response in the limit of non-linear driving of the mechanics. Similar to linear mechanical drive, an overcoupled cavity the red-sideband drive may lea…
We discuss the form of the wave-function of a state subjected to a scalar linear potential, paying special attention to quantum tunneling. We analyze the phases acquired by the evolved state and show that some of them have a pure quantum mechanical origin. In order to measure one of these phases, we propose a simple experimental scenario. We finally apply the evolution equations to re-analyze the Stern\&Gerlach experiment and to show how to manipulate spin by employing constant electric fields.
We consider an optomechanical system that is composed of a mechanical and an optical mode interacting through a linear and quadratic optomechanical dispersive couplings. The system is operated in an unresolved side band limit with a high quality factor mechanical resonator. Such a system then acts as parametrically driven oscillator, giving access to an intensity assisted tunability of the spring constant. This enables the operation of optomechanical system in its 'soft mode' wherein the mechanical spring softens and responds with a lower resonance frequency. We show that this soft mode can be…
We investigate the behaviour of two non-linearly coupled flexural modes of a doubly-clamped suspended beam (nanomechanical resonator). One of the modes is externally driven. We demonstrate that classically, the behavior of the non-driven mode is reminiscent of that of a parametrically driven linear oscillator: It exhibits a threshold behavior, with the amplitude of this mode below the threshold being exactly zero. Quantum-mechanically, we were able to access the dynamics of this mode below the classical parametric threshold. We show that whereas the mean displacement of this mode is still zero…
In this letter we establish the impossibility of existence of self replicating machine in the quantum world. We establish this result by three different but consistent approaches of linearity of quantum mechanics, no signalling condition and conservation of entanglement under local unitary operations.
We demonstrate a technique to estimate the strength of non-linearities present in the trapping potential of an optically levitated nanoparticle. By applying a brief pulsed reduction in trapping laser power of the system such as to squeeze the phase space distribution and then matching the time evolution of the shape of the phase space distribution to that of numerical simulations, one can estimate the strength of the non-linearity present in the system. We apply this technique to estimate the strength of the Duffing non-linearity present in the optical trapping potential.
In the quantum mechanical Hilbert space formalism, the probabilistic interpretation is a later ad-hoc add-on, more or less enforced by the experimental evidence, but not motivated by the mathematical model itself. A model involving a clear probabilistic interpretation from the very beginning is provided by the quantum logics with unique conditional probabilities. It includes the projection lattices in von Neumann algebras and here probability conditionalization becomes identical with the state transition of the Lueders - von Neumann measurement process. This motivates the definition of a hiera…
Cavity optomechanical systems are one of the leading experimental platforms for controlling mechanical motion in the quantum regime. We exemplify that the control over cavity optomechanical systems greatly increases by coupling the cavity also to a two-level system, thereby creating a hybrid optomechanical system. If the two-level system can be driven largely independently of the cavity, we show that the non-linearity thus introduced enables us to steer the extended system to non-classical target states of the mechanical oscillator with Wigner functions exhibiting significant negative regions.…
We consider a general symplectic transformation (also known as linear canonical transformation) of quantum-mechanical observables in a quantized version of a finite-dimensional system with configuration space isomorphic to $ \mathbb{R}^{q} $. Using the formalism of rigged Hilbert spaces, we define eigenstates for all the observables. Then we work out the explicit form of the corresponding transformation of these eigenstates. A few examples are included at the end of the paper.
We propose a technique to couple the position operator of a nano mechanical resonator to a SQUID device by modulating its magnetic flux bias. By tuning the magnetic field properly, either linear or quadratic couplings can be realized, with a discretely adjustable coupling strength. This provides a way to realize coherent nonlinear effects in a nano mechanical resonator by coupling it to a Josephson quantum circuit. As an example, we show how squeezing of the nano mechanical resonator state can be realized with this technique. We also propose a simple method to measure the uncertainty in the po…
$p$-Mechanics is a consistent physical theory which describes both classical and quantum mechanics simultaneously through the representation theory of the Heisenberg group. In this paper we describe how non-linear canonical transformations affect $p$-mechanical observables and states. Using this we show how canonical transformations change a quantum mechanical system. We seek an operator on the set of $p$-mechanical observables which corresponds to the classical canonical transformation. In order to do this we derive a set of integral equations which when solved will give us the coherent state…
We derive a standard quantum limit for probing mechanical energy quantization in a class of systems with mechanical modes parametrically coupled to external degrees of freedom. To resolve a single mechanical quantum, it requires a strong-coupling regime -- the decay rate of external degrees of freedom is smaller than the parametric coupling rate. In the case for cavity-assisted optomechanical systems, e.g. the one proposed by Thompson et al., zero-point motion of the mechanical oscillator needs to be comparable to linear dynamical range of the optical system which is characterized by the optic…
Typical optomechanical systems involving optical cavities and mechanical oscillators rely on a coupling that varies linearly with the oscillator displacement. However, recently a coupling varying instead as the square of the mechanical displacement has been realized, presenting new possibilities for non-demolition measurements and mechanical squeezing. In this article we present a quantum mechanical study of a generic quadratic-coupling optomechanical Hamiltonian. First, neglecting dissipation, we provide analytical results for the dressed states, spectrum, phonon statistics and entanglement. …
Hybrid spin-mechanical setups offer a versatile platform for quantum science and technology, but improving the spin-phonon as well as the spin-spin couplings of such systems remains a crucial challenge. Here, we propose and analyze an experimentally feasible and simple method for exponentially enhancing the spin-phonon, and the phonon-mediated spin-spin interactions in a hybrid spin-mechanical setup, using only \emph{ linear resources}. Through modulating the spring constant of the mechanical cantilever with a time-dependent pump, we can acquire a tunable and nonlinear (two-phonon) drive to th…
In this paper, without any priori assumption about the post-measurement state of system, we will examine how this state is restricted by assuming each of these following assumptions. First, by using this reasonable assumption that two successive measurements should be describable as one measurement. Second, by assuming the impossibility of faster than light signaling, "No-signaling condition". However, only by using these assumptions it is not possible to obtain the usual projection postulate. Instead, by means of a simple lemma, we will show that the density operator of system after a measure…
An exact solution of the energy shift in each quantum mechanical energy levels in a one dimensional symmetrical linear harmonic oscillator has been investigated. The solution we have used here is firstly derived by manipulating Schrodinger differential equation to be confluent hypergeometric differential equation. The final exact numerical results of the energy shifts are then found by calculating the final analytical solution of the confluent hypergeometric equation with the use of a software (Mathcad Plus 6.0) or a program programmed by using Turbo Pascal 7.0. We find that the results of the…
We propose a realistic system with separated optical and mechanical degrees of freedom, in which a high-mechanical-quality silicon nitride membrane is placed upon a high-optical-quality whispering gallery microcavity. The strongly enhanced linear optomechanical coupling, together with simultaneously low optical and mechanical losses in the present system, results in a remarkable single-photon cooperativity exceeding 300. This unprecedented cooperativity in the optomechanical system enables optical nonlinearity at low light intensities and holds great potential in generating, storing, and imple…
In recent years, the field of microwave optomechanics has emerged as leading platform for achieving quantum control of macroscopic mechanical objects. Implementations of microwave optomechanics to date have coupled microwave photons to mechanical resonators using a moving capacitance. While simple and effective, the capacitive scheme suffers from inherent and practical limitations on the maximum achievable coupling strength. Here, we experimentally implement a fundamentally different approach: flux-mediated optomechanical coupling. In this scheme, mechanical displacements modulate the flux in …
In this paper, we provide a rigorous quantum mechanical derivation for the coherent photon transport characteristics of a two-level atom coupled to a waveguide without linearizing the coupling coefficient between the light and the atom. We propose a novel single frequency sampling method utilizing a UV-cutoff that allows us to treat the singularities in real space scattering potential despite the non-convergence property. We also study the conditions under which the linearization of the coupling coefficient is an accurate assumption and find the resulting spontaneous emission and transport cha…
Mechanical systems are ideal candidates for studying quantumbehavior of macroscopic objects. To this end, a mechanical resonator has to be cooled to its ground state and its position has to be measured with great accuracy. Currently, various routes to reach these goals are being explored. In this review, we discuss different techniques for sensitive position detection and we give an overview of the cooling techniques that are being employed. The latter include sideband cooling and active feedback cooling. The basic concepts that are important when measuring on mechanical systems with high accu…
