Extraction of the Proton Beam from the 70 GeV IHEP Accelerator
A. G. Afonin, V. T. Baranov, V. M. Biryukov, I. M. Ivanov, A. A. Kardash, V. I. Kotov, V. A. Maisheev, V. I. Terekhov, E. F. Troyanov, Yu. S. Fedotov, V. N. Che… 展开作者
A. G. Afonin, V. T. Baranov, V. M. Biryukov, I. M. Ivanov, A. A. Kardash, V. I. Kotov, V. A. Maisheev, V. I. Terekhov, E. F. Troyanov, Yu. S. Fedotov, V. N. Chepegin, Yu. A. Chesnokov
备注：
Presented at CARE-HHH-APD Mini-Workshop on Crystal Collimation in Hadron Storage Rings (CC-2005), Geneva, Switzerland, 7-8 Mar 2005
This paper presents the physical background for particle extraction from IHEP accelerator using short bent silicon crystals, analyses the results of the studies, considers in detail the regime of simultaneous work of crystal extraction and several internal targets. It is experimentally shown that the use of short crystals allows the extraction of beams with intensity of 10e12 proton/cycle with efficiency of 85%.
IHEP Protvino has pioneered the wide practical use of bent crystals as optical elements in high-energy beams for beam extraction and deflection on permanent basis since 1989. In the course of IHEP experiments, crystal channeling has been developed into efficient instrument for particle steering at accelerators, working in predictable, reliable manner with beams of very high intensity over years. Crystal systems extract 70 GeV protons from IHEP main ring with efficiency of 85% at intensity of 1.E12, basing on multi-pass mechanism of channeling proposed theoretically and realised experimentally …
This report overviews studies accomplished in the U70 proton synchrotron of IHEP-Protvino during the recent two decades. Major attention is paid to a routine application of bent crystals for beam extraction from the machine. It has been confirmed experimentally that efficiency of beam extraction with a crystal deflector of around 85% is well feasible for a proton beam with intensity up to 1012 protons per cycle. Another trend is to use bent crystals for halo collimation in a high energy collider. New promising options emerge for, say, LHC and ILC based on the "volume reflection" effect, which …
The article presents an overview of the results obtained at U-70 accelerator of IHEP to use bent crystals for beam control of high energy protons. Considerable attention is paid to practical application of crystals to create new modes of beam extraction from the accelerator to ensure experiments on high energy physics. It was shown that with the crystal deflectors the efficiency reached ~ 90% with intensity up to 10^12 protons per cycle of U-70. The results of experiments on the use of crystals to enhance the effectiveness of the absorption of the unused beam, as well as the use of crystals fo…
Helium Purification System is an important sub-system in the Accelerator Driven Subcritical System of the Institute of High Energy Physics(IHEP ADS). The purifier is designed to work at the temperature of 77K. The purifier will work in a flow rate of 5g/s at 20MPa in continuous operation of 12 hours. The oil and moisture are removed by coalescing filters and a dryer, while nitrogen and oxygen are condensed by a phase separator and then adsorbed in several activated carbon adsorption cylinders. After purification, the purified helium has an impurity content of less than 5ppm.
The design and parameters of the polarized-beam facility at U-70 proton synchrotron of NRC Kurchatov Institute - IHEP are presented. The new beamline 24A will provide the polarized proton and antiproton beams for carrying out the rich physics program of the SPASCHARM experiment for comprehensive studies of spin phenomena in a wide spectrum of hadronic reactions in the energy range of 10-45 GeV.
Crystal lattice can trap and channel particle beams along major crystallographic directions. In a bent crystal, the channelled particles follow the bend. This makes a basis for an elegant technique of beam steering by means of bent channelling crystals, experimentally demonstrated from 3 MeV to 1 TeV. This technique was strongly developed in recent studies at CERN, FNAL, IHEP, and BNL, and can lead to interesting applications also at the LHC, such as crystal collimation making a collider cleaner by an order of magnitude. We review recent developments in the field and show outlook for the futur…
While particle beam steering (and in particular, "scraping") in accelerators by bent channeling crystals is an established technique extensively tested at IHEP Protvino and other major high-energy labs, an interesting question is how one could improve channeling capabilities by applying modern nanotechnology. Theoretical research of nanotube channeling was in progress over recent years. In this work, we assess potential benefits from nanotube channeling for real accelerator systems. We report simulation studies of channeling in nanostructured material (carbon SWNT and MWNT) tested for possible…
We are considering a two-beam accelerator (TBA) scheme with ion or proton beam as a driver. By comparison of the proposed scheme and the one with electron driver, we concluded, that TBA with ion/proton driver beam looks preferable. Existence of big proton accelerators in a few laboratories gives a boost for reconsideration of the baseline for post-LHC era. These Labs are FERMILAB, BNL, CERN and IHEP at Protvino, Moscow region. Protvino could emerge as one advantageous location and get stimulus for recovering the 600GeV-proton synchrotron in the existing~20km-long tunnel. This synchrotron was p…
Particle channeling in a bent crystal lattice has led to an efficient instrument for beam steering at accelerators, demonstrated from MeV to TeV energies. In particular, crystal focusing of high energy protons to micron size has been demonstrated at IHEP with the results well in match with Lindhard (critical angle) prediction. Channeling in crystal microstructures has been proposed as a unique source of a microbeam of high-energy particles. Channeling in nanostructures (single-wall and multi-wall nanotubes) offers the opportunities to produce ion beams on nanoscale. Particles channeled in a na…
In this paper, a novel concept combining a fixed field alternating gradient accelerator with time-varying quadrupoles is presented which solves some of the major problems of conventional fixed field accelerators. This concept combines a stable racetrack fixed field configuration with dispersion free straight sections to enable continuous variable energy extraction. In the long straight sections, a time-varying synchrotron-like alternating gradient focusing structure makes it possible for the first time to correct the beam optics of an FFA accelerator in order to heuristically maximize the beam…
A series of Silicon crystal undulator samples were produced based on the approach presented in PRL 90 (2003) 034801, with the periods of undulation from 0.1 mm to 1 mm, and the number of periods on the order of 10. The samples were characterized by X-rays, revealing the sine-like shape of the crystal lattice in the bulk. Next step in the characterization has been the channeling tests done with 70 GeV protons, where good channeling properties of the undulated Silicon lattice have been observed. The photon radiation tests of crystal undulators with high energy positrons are in progress on severa…
It has been shown that the use of a bent crystal with a variable curvature radius makes it possible to reduce the fraction of dechanneled particles by an order of magnitude. This effect enables the strong reduction of the particle density at the edge of a collimator or the partition of a septum upon the multiturn extraction of a beam from a ring accelerator. In particular, the beam extraction efficiency at the U-70 synchrotron and Large Hadron Collider can be increased to 95 and 99.65%, respectively.
The performance of high beam power accelerators is strongly dependent on appropriate injection, acceleration and extraction system designs as well as on the way interactions of the beam with machine components are handled. The experience of the previous ICFA High -Brightness Beam workshops has proven that it is quite beneficial to combine analyses and discussion of these issues in one group. A broad range of topics was presented and discussed at the Working Group C sessions at the HB2012 Workshop. Highlights from the talks, outstanding issues along with plans and proposals for future work are …
The recently developed frequency extraction algorithm [G.R. Werner and J.R. Cary, J. Comp. Phys. 227, 5200 (2008)] that enables a simple FDTD algorithm to be transformed into an efficient eigenmode solver is applied to a realistic accelerator cavity modeled with embedded boundaries and Richardson extrapolation. Previously, the frequency extraction method was shown to be capable of distinguishing M degenerate modes by running M different simulations and to permit mode extraction with minimal post-processing effort that only requires solving a small eigenvalue problem. Realistic calculations for…
The efficiency of the beam extraction and collimation systems in circular accelerators with the use of the channeling effect in a bent crystal is determined. The dependences of the extraction efficiency on the geometrical parameters of the crystal (its length, thickness, and bending angle), the azimuthal location of the system components, and the offset of the septum or scraper are presented. The influence of crystal imperfections (amorphous layers, misorientation, and torsion) on the efficiency of the systems is considered, and their tolerances are proposed. It is shown that an extraction eff…
Performance of the Gamma-ray Transient Monitor at the IHEP Electron-Beam Facility
Institute of High Energy Physics, Chinese Academy of Sciences（中国科学院高能物理研究所）；Guangxi University（广西大学）；Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences（中国科学院空间应用工程与技术中心）
New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It is shown, that new devices can effectively steer a beam in a wide energy range. For protons with energy 50 GeV efficiency of extraction and collimation about 90 % has been achieved which is record for this method. Reduction of particle losses in 2-3 times was observed also in accelerator at application of different crystals in comparison with the usual one-…
This paper gives an overview of the beam injection and extraction principles for accelerators. After a brief general introduction, it explains different methods of injecting the beam for hadron and lepton machines. It describes single- and multi-turn hadron injection, charge-exchange H- injection, then betatron and synchrotron injection for leptons. For extraction, it presents single- and multi-turn extraction, as well as resonant extraction methods. Finally, the requirements for linking several accelerators by a transfer line are presented.
It is reported that [Z. Huang et al., Phys. Rev. Lett. 109, 204801 (2012)], high-gain free-electron laser (FEL) can be generated by transverse-dispersed electron beams from laser-plasma accelerators (LPAs) using transverse-gradient undulator (TGU) assuming an ideal constant dispersion function without focusing optics. The constant dispersion function keeps electrons beyond the resonant energy bandwidth still being on resonant with the FEL radiation. Instead, in this paper, the case with focusing optics in an LPA-driven FEL using TGU is numerically studied, in which the dispersion function shou…
In this paper we introduce, from basic principles, the main concepts of beam focusing and transport of space charge dominated beams in high brightness accelerators using the beam envelope equation as a convenient mathematical tool. Matching conditions suitable for preserving beam quality are derived from the model for significant beam dynamics regimes. The specific case of the plasma accelerator module is also addressed.
Luminosity-driven channeling extraction has been observed for the first time in a 900 GeV study at the Fermilab Tevatron. This experiment, Fermilab E853, demonstrated that useful TeV level beams can be extracted from a superconducting accelerator during high luminosity collider operations without unduly affecting the background at the collider detectors. Multi-turn extraction was found to increase significantly the efficiency of the process. The beam extraction efficiency was about 25%. Studies of time dependent effects found that the turn-to-turn structure was governed mainly by accelerator b…
In this lecture we introduce from basic principles the main concepts of beam focusing and transport in modern accelerators using the beam envelope equationas a convenient mathematical tool. Matching conditions suitable for preserving beam quality are derived from the model for significant beam dynamics regimes. An extension of the model to the case of plasma accelerators is introduced. The understanding of similarities and differences with respect to traditionalaccelerators is also emphasized.
An accelerator has limited dynamic range: a chain of accelerators is required to reach high energy. A combination of septa and kicker magnets is frequently used to inject and extract beam from each stage. The kicker magnets typically produce rectangular field pulses with fast rise- and/or fall-times, however the field strength is relatively low. To compensate for their relatively low field strength, the kicker magnets are generally combined with electromagnetic septa. The septa provide relatively strong field strength but are either DC or slow pulsed. This paper discusses injection and extract…
The design and performance of a novel crystal deflector for proton beams are reported. A silicon crystal was used to channel and extract 70 GeV protons from the U-70 accelerator in Protvino with an efficiency of 85%, as measured for a beam of ~1e12 protons directed towards crystals of ~2 mm length in spills of ~2 s duration. Experimental data agree with the theoretically predicted Monte Carlo results for channeling. The technique allows one to manufacture a very short deflector along the beam direction (2 mm). Consequently, multiple encounters of circulating particles with the crystal are poss…
There will be a review of the history of polarized proton beams, and a discussion of the unexpected and still unexplained large transverse spin effects found in several high energy proton-proton spin experiments at the ZGS, AGS and Fermilab. Next, there will be a discussion of present and possible future experiments on the violent elastic collisions of polarized protons at the 70 GeV U-70 accelerator at IHEP-Protvino in Russia and the new high intensity 50 GeV J-PARC facility being built at Tokai in Japan.
Pulse-to-pulse orbit jitter, if not controlled, can drastically degrade the luminosity in future linear colliders. The second goal of the ATF2 project at the KEK accelerator test facility is to stabilise the vertical beam position down to approximately 5% of the nominal rms vertical beam size at the virtual Interaction Point (IP). This will require control of the orbit to better than 1 micrometre at the entrance of the ATF2 final focus system. In this report simulation studies are presented for vertical jitter propagation through the ATF2 extraction line and final focus system, and the jitter …
We report on the development of multi-beam RF linear ion accelerators that are formed from stacks of low cost wafers and describe the status of beam power scale-up using an array of 120 beams. The total argon ion current extracted from the 120-beamlet extraction column was 0.5 mA. The measured energy gain in each RF gap reached as high as 7.25 keV. We present a path of using this technology to achieve ion currents >1 mA and ion energies >100 keV for applications in materials processing.
The study of beam transport is of central importance to the design and performance assessment of modern particle accelerators. In this paper, we benchmark two contemporary codes, DIMAD and BDSIM, the latter being a relatively new tracking code built within the framework of GEANT4. We consider both the 20 mrad and 2 mrad extraction lines of the 500 GeV International Linear Collider (ILC) and we perform particle tracking studies of heavily disrupted post-collision electron beams. We find that the two codes give an almost equivalent description of the beam transport.
Recently it was proposed to apply a bent single crystal with decreasing curvature instead of uniform bending for improvement of extraction and collimation of a circulating beam in particle accelerators. In the given paper created crystal devices with a variable curvature, realizing this idea are described. Results of measurement of curvature along a crystal plate are informed. It is shown, that with the help of the developed devices it is possible to carry out also high energy beam focusing. The mathematical description of this process is proposed.
The study of beam transport is of central importance to the design and performance assessment of modern particle accelerators. In this work, we benchmark two contemporary codes - DIMAD and BDSIM, the latter being a relatively new tracking code built within the framework of GEANT4. We consider both the 20 mrad and 2 mrad extraction lines of the International Linear Collider (ILC) and we perform tracking studies of heavily disrupted post-collision electron beams. We find that the two codes mostly give an equivalent description of the beam transport.
Electron cloud effects have become one of the main performance limitations for circular particle accelerators operating with positively-charged beams. Among other machines worldwide, the CERN Super Proton Synchrotron (SPS), as well as the Large Hadron Collider (LHC) are affected by these phenomena. Intense efforts have been devoted in recent years to improve the understanding of electron cloud (EC) generation with the aim of finding efficient mitigation measures. In a different domain of accelerator physics, non-linear resonances in the transverse phase space have been proposed as novel means …
The current design of beam preparation for a proposed mu->e conversion experiment at Fermilab is based on slow resonant extraction of protons from the Debuncher. The Debuncher ring will have to operate with beam intensities of 3 x 10**12 particles, approximately four orders of magnitude larger than its current value. The most challenging requirements on the beam quality are the spill uniformity and low losses in the presence of large space charge and momentum spread. We present results from simulations of third integer resonance extraction assisted by RF knock-out (RFKO), a technique developed…
Controlling non-linear effects in the transverse dynamics of charged particle beams in circular accelerators opens new possibilities for controlling some of the beam properties. Beam splitting by crossing a stable 1D non-linear resonance is part of the routine operation of the CERN Proton Synchrotron. The beam undergoes trapping and transport inside stable islands created in the horizontal plane to allow multi-turn extraction towards the Super Proton Synchrotron, where the beam is used for fixed-target experiments. This process acts only on the horizontal beam emittance, inducing a reduction o…
We consider the use of a dielectric-loaded structure to extract rf energy from a high current electron drive beam as a power source for a high energy two-beam accelerator. This represents an alternative technique which we show to have some significant advantages over the use of the currently proposed corrugated metal structures as power extraction devices. We discuss a particular design that will extract high power rf (0.1 -- 1 GW) from a high current drive beam. Rf generation and transport in this class of devices have already been demonstrated at lower frequencies. We discuss the design para…
Slow extraction of bunched beams is widely used for mitigating the formation of micro structures due to ripples of the accelerator magnets power supplies on the extracted beam which is also referred to as spill. That helps, in particular, experiments with slow detectors or with low extraction rates. Furthermore, this technique is widely used for avoiding long gaps in the spill measured in ionisation chambers which in turn would trigger interlocks. On the other hand, the bunches create spill structures on time scales defined by the rf frequency. In addition, macroscopic spill structures of dura…
Proof-of-principle experiment of a novel beam extraction over millions of turns using stable resonance islands and bent crystal
CERN（欧洲核子研究中心）；Goethe University（歌德大学）；John Adams Institute at Royal Holloway, University of London（伦敦大学皇家霍洛威学院约翰亚当斯研究所）；Université Libre de Bruxelles（布鲁塞尔自由大学）；GSI Helmholtzzentrum für Schwerionenforschung GmbH（德国重离子研究中心）
Crossing a horizontal nonlinear resonance is the approach that can be used to split a beam in several beamlets with the goal to perform multi-turn extraction from a circular particle accelerator. Such an approach has been successfully implemented in the CERN Proton Synchrotron and is used routinely for the production of high-intensity proton beams for fixed-target physics at the Super Proton Synchrotron. Recently, thanks to the deployment of diamond detectors, originally installed to monitor the beam losses at extraction, it has been possible to measure the horizontal beam emittance of the spl…
This paper introduces the protection of circular particle accelerators from accidental beam losses. Already the energy stored in the beams for accelerators such as the TEVATRON at Fermilab and Super Proton Synchrotron (SPS) at CERN could cause serious damage in case of uncontrolled beam loss. With the CERN Large Hadron Collider (LHC), the energy stored in particle beams has reached a value two orders of magnitude above previous accelerators and poses new threats with respect to hazards from the energy stored in the particle beams. A single accident damaging vital parts of the accelerator could…
Crossing the transition energy is always a delicate process, representing a potential source of strong perturbations of the dynamics of charged particle beams in a hadron circular accelerator. Since the first generation of multi-GeV rings, intense studies have been devoted to understanding the possible harmful mechanisms involved in transition crossing and to devise mitigation measures. Nowadays, several circular particle accelerators are successfully operating across transition and this process is well mastered. In a completely different context, stable resonances of the traverse phase space …
A microwave ion source is used as an ion source of 100-MeV proton accelerator at Korea Multipurpose Accelerator Complex (KOMAC). The specifications of the ion source are 50 keV in energy and 20 mA in peak current. The plasma is operated in CW mode using magnetron and the pulse beam is extracted using semiconductor switch located in the extraction power supply. The beam characteristics were measured based on the pulse voltage and current. A test stand was also installed to study the beam characteristics of the ion source in off-line. In this paper, the pulse beam characteristics of the ion sour…
The Isotope mass Separator On-Line DEvice (ISOLDE) facility located at CERN, produces and transports Radioactive Ion Beams (RIBs) at low or high energy through the REX/HIE-ISOLDE linear accelerator, for nuclear physics, astrophysics, solid-state physics and applied-physics purposes. Increasing the charge state of the ions is a prerequisite for efficient acceleration and is accomplished by an Electron Beam Ion Source (REXEBIS). For more effective event discrimination at the experimental detectors, such as the MINIBALL spectrometer, it is advantageous to increase the pulse width of extracted ion…
The possibility of extracting highly energetic particles from the Super Proton Synchrotron (SPS) by means of silicon bent crystals has been explored since the 1990's. The channelling effect of a bent crystal can be used to strongly deflect primary protons and eject them from the synchrotron. Many studies and experiments have been carried out to investigate crystal channelling effects. The extraction of 120 and 270 GeV proton beams has already been demonstrated in the SPS with dedicated experiments located in the ring. Presently in the SPS, the UA9 experiment is performing studies to evaluate t…
Internal continuous discharge can rapidly damage high-current ion sources and their extraction systems composed of several electrodes at high voltage. To prevent this continuous discharge inside the extraction system, a rapid prototype using an Experimental Physics and Industrial Control System (EPICS) software system for data acquisition has been implemented. During commissioning of the 140 mA deuterium electron cyclotron resonance ion source of the Linear IFMIF Prototype Accelerator (LIPAc), discharges were often observed during plasma tuning of the ion source and beam optics tuning of the e…
Simon van der Meer was a brilliant scientist and a true giant in the field of accelerators. His seminal contributions to accelerator science are essential to this day in our quest to satisfy the demands of modern particle physics. Whether we are talking of long-baseline neutrino physics or antiproton-proton physics at CERN and Fermilab, or proton-proton physics at the LHC, his techniques and inventions have been a vital and necessary part of modern-day successes. Simon van der Meer and Carlo Rubbia were the first CERN scientists to become Nobel laureates in Physics in 1984. His less well-known…
Beam transfer, such as injection into or extraction from an accelerator, is one of the most critical moments in terms of machine protection in a high-intensity machine. Special equipment is used and machine protection aspects have to be taken into account in the design of the beam transfer concepts. A brief introduction of the principles of beam transfer and the equipment involved will be given in this lecture. The main concepts of machine protection for injection and extraction will be presented, with examples from the CERN SPS and LHC.
We have experimentally demonstrated the first non-intrusive 1-GeV proton beam extraction for the generation of muons with a temporal structure optimized for Muon Spin Relaxation/Rotation/Resonance (MuSR) applications. The proton pulses are extracted based on the laser neutralization of 1 GeV hydrogen ion (H-) beam in the high energy beam transport of the Spallation Neutron Source (SNS) accelerator. The maximum flux of the extracted proton beam accounts for only 0.2% of the total proton beam used for neutron production, a marked difference from the 20% reduction at other co-located muon and neu…
Cancer therapy using protons and heavier ions such as carbon has demonstrated advantages over other radiotherapy treatments. To bring about the next generation of clinical facilities, the requirements are likely to reduce the footprint, obtain beam intensities above 1E10 particles per spill, and achieve faster extraction for more rapid, flexible treatment. This review follows the technical development of ion therapy, discussing how machine parameters have evolved, as well as trends emerging in technologies for novel treatments such as FLASH. To conclude, the future prospects of ion therapy acc…
The bent crystals are applied on large accelerators to deflect particle beams in process of extraction and collimation. Recently the proposals of fixed target researches in the LHC are formulated. For realization of this program not only deflection but also focusing the LHC beam by bent crystals can be used. In the given work experimental results on 50 GeV proton beam focusing with the help of novel crystal device are reported. The positive property of this device is opportunity to work near the circulating beam of an accelerator, including the LHC.
For the future intensity increase of the fixed-target beams in the CERN accelerator complex, a barrier-bucket scheme has been developed to reduce the beam loss during the 5-turn extraction from the PS towards the SPS, the so-called Multi-Turn Extraction. The low-level RF system must synchronise the barrier phase with the PS extraction and SPS injection kickers to minimise the number of particles lost during the rise times of their fields. As the RF voltage of the wide-band cavity generating the barrier bucket would be too low for a conventional synchronisation, a combination of a feedforward c…
Influence of volume capture on a process of volume reflection of ultrarelativistic particles moving in bent single crystals was considered analytically. Relations describing various distributions of particles involving in the process, the probability of volume capture and behavior of channeling and dechanneling fractions of a beam were obtained. Results of study will be useful at creation of multicrystal devices for collimation and extraction of beams on modern and future accelerators.
This report sums up in two volumes the first 50 years of operation of the CERN Proton Synchrotron. After an introduction on the genesis of the machine, and a description of its magnet and powering systems, the first volume focuses on some of the many innovations in accelerator physics and instrumentation that it has pioneered, such as transition crossing, RF gymnastics, extractions, phase space tomography, or transverse emittance measurement by wire scanners. The second volume describes the other machines in the PS complex: the proton linear accelerators, the PS Booster, the LEP pre-injector, …
Basing on experiments at SLAC, MAMI, CERN, and on Monte Carlo simulations, we assess the physical limits on efficiency and reachable angles of electron deflection in bent crystals in the energy range from sub-GeV to sub-TeV. We find that applications of electron channeling for beam deflection are possible, limited by maximal deflection angle of 2-3 mrad at sub-GeV, 1-2 mrad at multi-GeV, and 0.5-1 mrad at sub-TeV energy. This opens opportunities for crystal-assisted electron beam extraction from accelerator rings.
