We study the dispersion and leakage properties for the recently reported low-loss photonic band-gap fiber by Smith et al. [Nature 424, 657 (2003)]. We find that surface modes have a significant impact on both the dispersion and leakage properties of the fundamental mode. Our dispersion results are in qualitative agreement with the dispersion profile reported recently by Ouzounov et al. [Science 301, 1702 (2003)] though our results suggest that the observed long-wavelength anomalous dispersion is due to an avoided crossing (with surface modes) rather than band-bending caused by the photonic band-gap boundary of the cladding.
Optical waveguide segments based on geometrically unbound photonic crystal fibers (PCF) designs could be exploited as building blocks to realize miniaturized complex devices which implement advanced photonic operations. Here, we show how to fabricate optical waveguide segments with PCF designs by direct high-resolution 3D printing and how the combination of these segments can realise complex photonic devices. We demonstrate the unprecedented precision and flexibility of our method by fabricating the first-ever fiber polarising beam splitter based on PCFs. The device was directly printed in one…
We present a formal analogy between the eigenvalue problem for guided scalar modes in a low-contrast photonic bandgap fiber and quasi-stationary TM modes of a two-dimensional (2D) photonic structure. Using this analogy, we numerically study the confinement losses of disordered microstructured fibers through the leakage rate of an open 2D system with high refractive index inclusions. Our results show that for large values of the disorder, the confinement losses increase. However, they also suggest that losses might be improved in strongly disordered fibers by exploring ranges of physical parame…
Photonic crystal fibers represent one of the most active research fields in modern fiber optics. The recent advancements of topological photonics have inspired new fiber concepts and designs. Here, we demonstrate a new type of topological photonic crystal fibers based on second order photonic corner modes from the Su-Schrieffer-Heeger model. Different from previous works where the in-plane properties at $k_z=0$ have been mainly studied, we find that in the fiber configuration of $k_z>0$, a topological bandgap only exists when the propagation constant $k_z$ along the fiber axis is larger than a…
We report generation of broadband low divergent supercontinuum over the entire wavelength window of 1.5 to 3.5 μm from a 2.25 meter long effective single moded photonic bandgap fiber with mode area of 1100 μm2.
We demonstrate a simple and rapid epoxy-based method for transferring photonic crystal cavities to the facets of optical fibers. Passive Si cavities were measured via fiber taper coupling as well as direct transmission from the fiber facet. Active quantum dot containing GaAs cavities showed photoluminescence that was collected both in free space and back through the original fiber. Cavities maintain a high quality factor (2000-4000) in both material systems. This new design architecture provides a practical mechanically stable platform for the integration of photonic crystal cavities with macr…
Results from the calculation of the basic characteristics of the photonic crystal fiber with two rings of holes are presented by the approach which takes into account the exact distribution of the refractive index over the cross section of the photonic crystal fiber. Formulae are theoretically derived for the calculation of holes with arbitrary shapes by dividing the material within them into rotated at different angles rectangles. Keywords: photonic crystal fibre, Galerkin method, a set of sine functions, local coordinate systems.
In the paper, we propose the new technology for mass production of the photonic crystal devices and all-optical integrated circuits. We carry out the brief analysis of positive and negative sides paying attention to recent advances in silicon fibers fabrication which is crucial moment in the proposed technology.
For the first time, we demonstrated that a hyper-broadband from 2μm to 10μm can be generated with a high spectral flatness by using a ~4 um pump and an As2Se3 photonic crystal fiber. The broad and flat dispersion profile and the low guiding loss of the endlessly single-mode As2Se3 photonic crystal fibers combining with the high nonlinearity and wide mid-infrared transparent window of As2Se3 chalcogenide glass are essential for this high performance mid-infrared laser source.
We build ring resonators to assess the potentialities of Kagome Hollow-Core Photonic Crystal Fibers for future applications to resonant rotation sensing. The large mode diameter of Kagome fibers permits to reduce the free space fiber-to-fiber coupling losses, leading to cavities with finesses of about 30 for a diameter equal to 15 cm. Resonance linewidths of 3.2~MHz with contrasts as large as 89\% are obtained. Comparison with 7-cell photonic band gap (PBG) fiber leads to better finesse and contrast with Kagome fiber. Resonators based on such fibers are compatible with the angular random walk …
Structured light have made deep impacts on modern biotechnology and clinical practice, with numerous optical systems and lasers currently being used in medicine to treat disease. We demonstrate a new concept of fiber-based optical hook scalpel. The subwavelength photonic hook is obtained in the vicinity of a shaped fiber tip with asymmetric radiation. A 1550 nm continuous-wave source, commonly used for medical imaging, has been required. Photonic hook with a lateral feature size less than the half-wavelength is achieved using a hemispherical shaped fiber tip with metallic mask. This breakthrou…
Optical fiber tapers are used to collect photoluminescence emission at ~1.5 um from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. Photoluminescence collection via fiber taper is enhanced 2.5 times relative to free space, with a total taper collection efficiency of 53%. By varying the fiber taper offset from the cavity, a broad tuning range of coupling strength is obtained. This material system combined with fiber taper collection is promising for building on-chip optical amplifiers.
Transient fully reconfigurable photonic circuits can be introduced at the optical fiber surface with subangstrom precision. A building block of these circuits, a 0.7 angstrom-precise nano-bottle resonator, is experimentally created by local heating, translated, and annihilated.
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality resonance filter.
In this paper we propose a new hypothesis of out of plane band gap formation in all solid photonic band gap (PBG) fibers. At first, one considers the process of the core modes formation as a result of excitation of continuous mode spectrum of single dielectric rod of the cladding. It is shown that the core modes can be considered as transverse resonance of a set of the radiation modes decoupled from the continuum provided that the phase matching condition for the propagation constants are fulfilled. An analogy between the core mode formation in all solid PBG fibers and formation of bound state…
We study photonic crystal fibers and ring resonators with topological features induced by Aubry- Andre-Harper modulations of the cladding. We find non trivial gaps and edge states at the interface between regions with different Chern numbers. We calculate the field profile and eigenvalue dispersion by an exact recursive approach. Compared with conventional circular resonators and fibers, the proposed structure features topological protection and hence robustness against symmetry-preserving local perturbations that do not close the gap. These topological photonic crystal fibers sustain strong f…
Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles.
We propose an optical trapping technique in which a fundamental soliton traps an ultrashort small amplitude radiation in a symmetric hollow-core photonic crystal fiber filled with a noble gas, preventing its dispersion. The system is Raman- and plasma-free. Trapping is due to the cross phase modulation effect between the two pulses. The trapped radiation inside the soliton-induced potential will oscillate periodically due to the shock effect, similar to the motion of a mechanical pendulum.
We demonstrate an amplitude-based micro-displacement sensor that uses a plastic photonic bandgap Bragg fiber with one end coated with a silver layer. The reflection intensity of the Bragg fiber is characterized in response to different displacements (or bending curvatures). We note that the Bragg reflector of the fiber acts as an efficient mode stripper for the wavelengths near the edge of the fiber bandgap, which makes the sensor extremely sensitive to bending or displacements at these wavelengths. Besides, by comparison of the Bragg fiber sensor to a sensor based on a regular multimode fiber…
We demonstrate analytically and numerically that a subwavelength-core dielectric photonic nanowire embedded in a properly designed photonic crystal fiber cladding shows evidence of a previously unknown kind of nonlinearity (the magnitude of which is strongly dependent on the waveguide parameters) which acts on solitons so as to considerably reduce their Raman self-frequency shift. An explanation of the phenomenon in terms of indirect pulse negative chirping and broadening is given by using the moment method. Our conclusions are supported by detailed numerical simulations.
We demonstrate experimentally an air-slot mode-gap photonic crystal cavity with quality factor of 15,000 and modal volume of 0.02 cubic wavelengths, based on the design of an air-slot in a width-modulated line-defect in a photonic crystal slab. The origin of the high Q air-slot cavity mode is the mode-gap effect from the slotted photonic crystal waveguide mode with negative dispersion. The high Q cavities with ultrasmall mode volume are important for applications such as cavity quantum electrodynamics, nonlinear optics and optical sensing.
We have investigated the interaction between a strong soliton and a weak probe with certain configurations that allow optical trapping in gas-filled hollow-core photonic crystal fibers in the presence of the shock effect. We have shown theoretically and numerically that the shock term can lead to an unbroken parity-time $ \left(\mathcal{PT}\right) $ symmetry potential in these kinds of fibers. Reciprocity breaking, a remarkable feature of the $ \mathcal{PT} $ symmetry, is also demonstrated numerically. Our results will open different configurations and avenues for observing $ \mathcal{PT} $-sy…
We show that point defects in two-dimensional photonic crystals can support bound states in the continuum (BICs). The mechanism of confinement is a symmetry mismatch between the defect mode and the Bloch modes of the photonic crystal. These BICs occur in the absence of bandgaps and therefore provide an alternative mechanism to confine light. Furthermore, we show that such BICs can propagate in a fiber geometry and exhibit arbitrarily small group velocity which could serve as a platform for enhancing non-linear effects and light-matter interactions in structured fibers.
We experimentally and theoretically study self-phase modulation by Kerr effect in a liquid filled hollow core photonic crystal fiber. We perform a complete characterization of the linear optical properties of the hollow core photonic band gap fiber filled with deuterated acetone to determine all the characteristics of the propagation mode. The nonlinear coefficient of the fiber is determined by fitting the output spectra broadened by self-phase modulation with a new analytical expression giving the spectra of a secant hyperbolic pulse transmitted through a Kerr media. The experiment allows a p…
We present the use of linearly down-tapered gas-filled hollow-core photonic crystal fiber in a single-stage, pumped with pulses from a compact infrared laser source, to generate a supercontinuum carrying significant spectral power in the deep ultraviolet (200 - 300 nm). The generated supercontinuum extends from the near infrared down to around 213 nm with up to 0.83 mW/nm in the deep ultraviolet.
We found the self-similar solitary solutions of a recently proposed model for propagation of pulses in gas filled hollow-core photonic crystal fibers that includes a plasma induced nonlinearity. As anticipated for a simpler model and using a perturbation analysis, there are indeed stationary solitary waves that accelerate and self-shift to higher frequencies. However, if the plasma nonlinearity strength is large or the pulse amplitudes are small, the solutions have distinguished long tails and decay as they propagate.
We report the generation of a purely vibrational Raman comb, extending from the vacuum ultraviolet (184 nm) to the visible (478 nm), in hydrogen-filled kagomé-style photonic crystal fiber pumped at 266 nm. Stimulated Raman scattering and molecular modulation processes are enhanced by higher Raman gain in the ultraviolet. Owing to the pressure-tunable normal dispersion landscape of the fiber-gas system in the ultraviolet, higher-order anti-Stokes bands are generated preferentially in higher-order fiber modes. The results pave the way towards tunable fiber-based sources of deep- and vacuum ultra…
We show how to apply tiling and pattern theory in the design of hollow-core photonic crystal fibers and guide light in multiple bandgaps. By combining two different glass apexes in a single [$3^6$;$3^2$.$4.3.4$] 2-uniform tiling, transmission regions with fundamental, second and third harmonic wavelengths are supported. This cladding design may also be an excellent candidate for high power beam delivery of Er/Yb, Nd:YAG and Ti:Sapphire laser sources.
A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a pre-polymer/LC solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG are discussed. Experimental data here presented, demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal…
We study coherent anti-Stokes Raman spectroscopy in air-filled anti-resonance hollow-core photonic crystal fiber, otherwise known as 'revolver' fiber. We compare the vibrational coherent anti-Stokes Raman signal of N$_2$, at 2331 cm$^{-1}$, generated in ambient air (no fiber present), with the one generated in a 2.96 cm of a revolver fiber. We show a 170 times enhancement for the signal produced in the fiber, due to an increased interaction path. Remarkably, the N$_2$ signal obtained in the revolver fiber shows near-zero non-resonant background, due to near-zero overlap between the laser field…
Based on the interplay between photoionization and Raman effect in gas-filled photonic crystal fibers, we propose a new optical device to control frequency-conversion of ultrashort pulses. By tuning the input-pulse energy, the output spectrum can be either down-converted, up-converted, or even frequency-shift compensated. For low input energies, Raman effect is dominant and leads to a redshift that increases linearly during propagation. For larger pulse energies, photoionization starts to take over the frequency conversion process, and induces a strong blueshift. We have found also that the fi…
