We define for each g>=2 and k>=0 a set M_{g,k} of orientable hyperbolic 3-manifolds with $k$ toric cusps and a connected totally geodesic boundary of genus g. Manifolds in M_{g,k} have Matveev complexity g+k and Heegaard genus g+1, and their homology, volume, and Turaev-Viro invariants depend only on g and k. In addition, they do not contain closed essential surfaces. The cardinality of M_{g,k} for a fixed k has growth type g^g. We completely describe the non-hyperbolic Dehn fillings of each M in M_{g,k}, showing that, on any cusp of any hyperbolic manifold obtained by partially filling M, there are precisely 6 non-hyperbolic Dehn fillings: three contain essential discs, and the other three contain essential annuli. This gives an infinite class of large hyperbolic manifolds (in the sense of Wu) with boundary-reducible and annular Dehn fillings having distance 2, and allows us to prove that the corresponding upper bound found by Wu is sharp. If M has one cusp only, the three boundary-reducible fillings are handlebodies.
We classify all the non-hyperbolic Dehn fillings of the complement of the chain-link with 3 components, conjectured to be the smallest hyperbolic 3-manifold with 3 cusps. We deduce the classification of all non-hyperbolic Dehn fillings of infinitely many 1-cusped and 2-cusped hyperbolic manifolds, including most of those with smallest known volume. Among other consequences of this classification, we mention the following: - for every integer n we can prove that there are infinitely many hyperbolic knots in the 3-sphere having exceptional surgeries n, n+1, n+2, n+3, with n+1, n+2 giving small S…
We show that there are at most finitely many one cusped orientable hyperbolic 3-manifolds which have more than eight non-hyperbolic Dehn fillings. Moreover, we show that determining these finitely many manifolds is decidable.
This paper describes the complete list of all 205,822 exceptional Dehn fillings on the 1-cusped hyperbolic 3-manifolds that have ideal triangulations with at most 9 ideal tetrahedra. The data is consistent with the standard conjectures about Dehn filling and suggests some new ones.
Previous work of the authors with Bus Jaco determined a lower bound on the complexity of cusped hyperbolic 3-manifolds and showed that it is attained by the monodromy ideal triangulations of once-punctured torus bundles. This paper exhibits an infinite family of minimal ideal triangulations of Dehn fillings on the link $8^3_9$ that also attain this lower bound on complexity.
In order to obtain a closed orientable convex projective four-manifold with small positive Euler characteristic, we build an explicit example of convex projective Dehn filling of a cusped hyperbolic four-manifold through a continuous path of projective cone-manifolds.
If a simple 3-manifold M admits a reducible and a toroidal Dehn filling, the distance between the filling slopes is known to be bounded by three. In this paper, we classify all manifolds which admit a reducible Dehn filling and a toroidal Dehn filling with distance 3.
This paper is the second in a series whose goal is to understand the structure of low-volume complete orientable hyperbolic 3-manifolds. Using Mom technology, we prove that any one-cusped hyperbolic 3-manifold with volume <= 2.848 can be obtained by a Dehn filling on one of 21 cusped hyperbolic 3-manifolds. We also show how this result can be used to construct a complete list of all one-cusped hyperbolic three-manifolds with volume <= 2.848 and all closed hyperbolic three-manifolds with volume <= 0.943. In particular, the Weeks manifold is the unique smallest volume closed orientable hyperboli…
To a hyperbolic manifold one can associate a canonical projective structure and ask whether it can be deformed or not. In a cusped manifold, one can ask about the existence of deformations that are trivial on the boundary. We prove that if the canonical projective structure of a cusped manifold is infinitesimally projectively rigid relative to the boundary, then infinitely many Dehn fillings are projectively rigid. We analyze in more detail the figure eight knot and the Withehead link exteriors, for which we can give explicit infinite families of slopes with projectively rigid Dehn fillings.
We show the manifolds at infinity of the complex hyperbolic triangle groups $Δ_{3,4,4;\infty}$ and $Δ_{3,4,6;\infty}$,are one-cusped hyperbolic 3-manifolds $m038$ and $s090$ in the Snappy Census respectively.That is,these two manifolds admit spherical CR uniformizations. Moreover, these two hyperbolic 3-manifolds above can be obtained by Dehn surgeries on the first cusp of the two-cusped hyperbolic 3-manifold $m295$ in the Snappy Census with slopes $2$ and $4$ respectively. In general,the main result in this paper allow us to conjecture that the manifold at infinity of the complex hyperbolic t…
An L-space is a rational homology 3-sphere with minimal Heegaard Floer homology. We give the first examples of hyperbolic L-spaces with no symmetries. In particular, unlike all previously known L-spaces, these manifolds are not double branched covers of links in S^3. We prove the existence of infinitely many such examples (in several distinct families) using a mix of hyperbolic geometry, Floer theory, and verified computer calculations. Of independent interest is our technique for using interval arithmetic to certify symmetry groups and non-existence of isometries of cusped hyperbolic 3-manifo…
We give three infinite families of examples of nonhyperbolic Dehn fillings on hyperbolic manifolds. A manifold in the first family admits two Dehn fillings of distance two apart, one of which is toroidal and annular, and the other is reducible and $\partial$-reducible. A manifold in the second family has boundary consisting of two tori, and admits two reducible Dehn fillings. A manifold in the third family admits a toroidal filling and a reducible filling with distance 3 apart. These examples establish the virtual bounds for distances between certain types of nonhyperbolic Dehn fillings.
If a hyperbolic 3-manifold M admits a reducible and a finite Dehn filling, the distance between the filling slopes is known to be 1. This has been proved recently by Boyer, Gordon and Zhang. The first example of a manifold with two such fillings was given by Boyer and Zhang. In this paper, we give examples of hyperbolic manifolds admitting a reducible Dehn filling and a finite Dehn filling of every type: cyclic, dihedral, tetrahedral, octahedral and icosahedral.
We prove results showing that the existence of essential maps of surfaces in a manifold M' obtained from a 3-manifold M by Dehn filling implies the existence of essential maps of surfaces in M.
We show that Dehn filling on the manifold $v2503$ results in a non-orderable space for all rational slopes in the interval $(-\infty , -1)$. This is consistent with the L-space conjecture, which predicts that all fillings will result in a non-orderable space for this manifold.
We prove that any knot or link in any 3-manifold can be nicely decomposed (splitted) by a filling Dehn sphere. This has interesting consequences in the study of branched coverings over knots and links. We give an algorithm for computing Johansson diagrams of filling Dehn surfaces out from coverings of 3-manifolds branched over knots or links.
We study the situation where we have two exceptional Dehn fillings on a given hyperbolic 3-manifold. We consider two cases that one filling creates a projective plane, and the other creates an essential torus or a Klein bottle, and give the best possible upper bound on the distance between two fillings for each case.
Let $M$ be a simple 3-manifold with a toral boundary component. It is known that if two Dehn fillings on $M$ along the boundary produce a reducible manifold and a toroidal manifold, then the distance between the filling slopes is at most three. This paper gives a remarkably short proof of this result.
Every cusped, finite-volume hyperbolic three-manifold has a canonical decomposition into ideal polyhedra. We study the canonical decomposition of the hyperbolic manifold obtained by filling some (but not all) of the cusps with solid tori: in a broad range of cases, generic in an appropriate sense, this decomposition can be predicted from that of the unfilled manifold. As an example, we treat all hyperbolic fillings on one cusp of the Whitehead link complement.
We prove that, for a hyperbolic two bridge knot, infinitely many Dehn fillings are rigid in $SO_0(4,1)$. Here rigidity means that any discrete and faithful representation in $SO_0(4,1)$ is conjugate to the holonomy representation in $SO_0(3,1)$. We also show local rigidity for almost all Dehn fillings.
Let M be a simple 3-manifold with a toral boundary component partial_0 M. If Dehn filling M along partial_0 M one way produces a toroidal manifold and Dehn filling M along partial_0 M another way produces a boundary-reducible manifold, then we show that the absolute value of the intersection number on partial_0 M of the two filling slopes is at most two. In the special case that the boundary-reducing filling is actually a solid torus and the intersection number between the filling slopes is two, more is said to describe the toroidal filling.
We show that if a simple 3-manifold $M$ has two Dehn fillings at distance $Δ\geq 4$, each of which contains an essential annulus, then $M$ is one of three specific 2-component link exteriors in $S^3$. One of these has such a pair of annular fillings with $Δ= 5$, and the other two have pairs with $Δ= 4$.
We give a summary of known results on the maximal distances between Dehn fillings on a hyperbolic 3-manifold that yield 3-manifolds containing a surface of non-negative Euler characteristic that is either essential or Heegaard.
In this paper we investigate the distances between Dehn fillings on a hyperbolic 3-manifold that yield 3-manifolds containing essential small surfaces including non-orientable surfaces. Especially we study the situations where one filling creates an essential sphere or projective plane, and the other creates an essential sphere, projective plane, annulus, Moebius band, torus or Klein bottle,all 11 pairs of such non-hyperbolic manifolds.
We use Heegaard splittings to give a criterion for a tunnel number one knot manifold to be non-fibered and to have large cyclic covers. We also show that such a knot manifold (satisfying the criterion) admits infinitely many virtually Haken Dehn fillings. Using a computer, we apply this criterion to the 2 generator, non-fibered knot manifolds in the cusped Snappea census. For each such manifold M, we compute a number c(M), such that, for any n>c(M), the n-fold cyclic cover of M is large.
Any one-cusped hyperbolic manifold M with an unknotting tunnel tau is obtained by Dehn filling a cusp of a two-cusped hyperbolic manifold. In the case where M is obtained by "generic" Dehn filling, we prove that tau is isotopic to a geodesic, and characterize whether tau is isotopic to an edge in the canonical decomposition of M. We also give explicit estimates (with additive error only) on the length of tau relative to a maximal cusp. These results give generic answers to three long-standing questions posed by Adams, Sakuma, and Weeks. We also construct an explicit sequence of one-tunnel knot…
We show that after generic filling along a torus boundary component of a 3-manifold, no two closed, 2-sided, essential surfaces become isotopic, and no closed, 2-sided, essential surface becomes inessential. That is, the set of essential surfaces (considered up to isotopy) survives unchanged in all suitably generic Dehn fillings. Furthermore, for all but finitely many non-generic fillings, we show that two essential surfaces can only become isotopic in a constrained way.
For a hyperbolic 3-manifold M with a torus boundary component, all but finitely many Dehn fillings on the torus component yield hyperbolic 3-manifolds. In this paper, we will focus on the situation where M has two exceptional Dehn fillings, both of which yield toroidal manifolds. For such situation, Gordon gave an upper bound for the distance between two slopes of Dehn fillings. In particular, if M is large, then the distance is at most 5. We show that this upper bound can be improved by 1 for a broad class of large manifolds.
We give a complete proof of Thurston's celebrated hyperbolic Dehn filling theorem, following the ideal triangulation approach of Thurston and Neumann-Zagier. We avoid to assume that a genuine ideal triangulation always exists, using only a partially flat one, obtained by subdividing an Epstein-Penner decomposition. This forces us to deal with negatively oriented tetrahedra. Our analysis of the set of hyperbolic Dehn filling coefficients is elementary and self-contained. In particular, it does not assume smoothness of the complete point in the variety of deformations.
We show that if a hyperbolic 3-manifold $M$ with a single torus boundary admits two Dehn fillings at distance 5, each of which contains an essential torus, then $M$ is a rational homology solid torus, which is not large in the sense of Wu. Moreover, one of the surgered manifold contains an essential torus which meets the core of the attached solid torus minimally in at most two points. This completes the determination of best possible upper bounds for the distance between two exceptional Dehn fillings yielding essential small surfaces in all ten cases for large hyperbolic 3-manifolds.
In this article, we study the Euler class of taut foliations on the Dehn fillings of a $\mathbb{Q}$-homology solid torus. We give a necessary and sufficient condition for the Euler class of a foliation transverse to the core of the filling solid torus to vanish. We apply this condition to taut foliations on Dehn fillings of hyperbolic fibered manifolds and obtain many new left-orderable Dehn filling slopes on these manifolds. For instance, we show that when $X$ is the exterior of a pretzel knot $P(-2,3,2r+1)$, $r\geq 3$, $π_1(X(α_n))$ is left-orderable for a sequence of positive slopes $α_n$ w…
Let $K= K(w,b,t)$ be a 1-bridge braid in a solid torus $V$, and let $γ$ be a $(p,q)$ curve on the torus $T = \partial V$ of the exterior $M_K$ of $K$. It will be shown that Dehn filling on $T$ along $γ$ produces a solid torus if and only if $p$ and $q$ satisfy one of four conditions determined by the parameters $(w,b,t)$ of the knot $K$. This solves the classification problem raised by Menasco and Zhang for such Dehn fillings.
We provide a calculus for the presentation of closed 3-manifolds via nullhomotopic filling Dehn spheres and we use it to define an invariant of closed 3-manifolds by applying the state-sum machinery. As a potential application of this invariant, we show how to get lower bounds for the Matveev complexity of P2-irreducible closed 3-manifolds. We also describe an easy algorithm for constructing a nullhomotopic filling Dehn sphere of each closed 3-manifold from any of its one-vertex triangulations.
In this paper, we study the Riley polynomial of double twist knots with higher genus. Using the root of the Riley polynomial, we compute the range of rational slope $r$ such that $r$-filling of the knot complement has left-orderable fundamental group. Further more, we make a conjecture about left-orderable surgery slopes of two-bridge knots.
In this paper, we develop a method for constructing left-orders on the fundamental groups of rational homology 3-spheres. We begin by constructing the holonomy extension locus of a rational homology solid torus $M$, which encodes the information about peripherally hyperbolic $\widetilde{\text{PSL}_2\mathbb{R}}$ representations of $π_1(M)$. Plots of the holonomy extension loci of many rational homology solid tori are shown, and the relation to left-orderability is hinted. Using holonomy extension loci, we study rational homology 3-spheres coming from Dehn filling on rational homology solid tori…
Let M be a 1-cusped hyperbolic 3-manifold whose cusp shape is quadratic. We show that there exists c=c(M) such that the number of hyperbolic Dehn fillings of M with any given volume v is uniformly bounded by c.
It has been observed that most manifolds in the Callahan-Hildebrand-Weeks census of cusped hyperbolic $3$-manifolds are obtained by surgery on the minimally twisted 5-chain link. A full classification of the exceptional surgeries on the 5-chain link has recently been completed. In this article, we provide a complete classification of the sets of exceptional slopes and fillings for all cusped hyperbolic surgeries on the minimally twisted 5-chain link, thereby describing the sets of exceptional slopes and fillings for most hyperbolic manifolds of small complexity. The classification produces the…
In our previous paper, we discussed the hyperbolization of the configuration space of n(> 4) marked points with weights in the projective line up to projective transformations. A variation of the weights induces a deformation. It was shown that this correspondence of the set of the weights to the Teichmüller space when n = 5 and to the Dehn filling space when n= 6 is locally one-to-one near the equal weight. In this paper, we establish its global injectivity.
Suppose $M$ is a hyperbolic 3-manifold which admits two Dehn fillings $M(r_1)$ and $M(r_2)$ such that $M(r_1)$ contains an essential torus and $M(r_2)$ contains an essential annulus. It is known that $Δ= Δ(r_1, r_2) \leq 5$. We will show that if $Δ= 5$ then $M$ is the Whitehead sister link exterior, and if $Δ= 4$ then $M$ is the exterior of either the Whitehead link or the 2-bridge link associated to the rational number $3/10$. There are infinitely many examples with $Δ= 3$.
We consider in this paper the minimally twisted chain link with 5 components in the 3-sphere, and we analyze the Dehn surgeries on it, namely the Dehn fillings on its exterior M5. The 3-manifold M5 is a nicely symmetric hyperbolic one, filling which one gets a wealth of hyperbolic 3-manifolds having 4 or fewer (including 0) cusps. In view of Thurston's hyperbolic Dehn filling theorem it is then natural to face the problem of classifying all the exceptional fillings on M5, namely those yielding non-hyperbolic 3-manifolds. Here we completely solve this problem, also showing that, thanks to the s…
This paper gives a quantitative version of Thurston's hyperbolic Dehn surgery theorem. Applications include the first universal bounds on the number of non-hyperbolic Dehn fillings on a cusped hyperbolic 3-manifold, and estimates on the changes in volume and core geodesic length during hyperbolic Dehn filling. The proofs involve the construction of a family of hyperbolic cone-manifold structures, using infinitesimal harmonic deformations and analysis of geometric limits.
In this paper we define a new invariant of the incomplete hyperbolic structures on a 1-cusped finite volume hyperbolic 3-manifold M, called the ortholength invariant. We show that away from a (possibly empty) subvariety of excluded values this invariant both locally parameterises equivalence classes of hyperbolic structures and is a complete invariant of the Dehn fillings of M which admit a hyperbolic structure. We also give an explicit formula for the ortholength invariant in terms of the traces of the holonomies of certain loops in M. Conjecturally this new invariant is intimately related to…
We propose a new algorithm for Dehn surgery problem, finding exceptional Dehn filling slopes for a given hyperbolic 3-manifold with a torus boundary, using a quantum invariant called "3D index". The invariant is defined using an ideal triangulation of the cusped 3-manifold. We test the algorithm for many examples.
We give new bounds for the distance between two exceptional filling slopes for a 1-cusped hyperbolic 3-manifold in several different situations. The distance between a reducible slope and a slope that produces a manifold with finite fundamental group is at most 2. The distance between a reducible slope and one that produces a very small manifold is also at most 2. The distance between a reducible slope and one which produces a manifold with a pi_1 injective torus is at most 4. The methods used involve both characteristic submanifold theory and the theory of the PSL(2,C) character variety.
A manifold M is simple if it contains no essential disk, sphere, annulus or torus. If M is simple and two Dehn fillings M(r_1), M(r_2) are nonsimple, then there is an upper bound on Δ(r_1,r_2), the geometric intersection number between r_1 and r_2. There are 10 possibilities, depending on the types of M(r_i). In this paper it will be shown that if M(r_1) contains an essential disk and M(r_2) contains an essential annulus, then Δ(r_1,r_2) is at most two. This completes the determination of the best possible upper bounds on Δ(r_1, r_2) for all ten cases.
The exceptional Dehn filling conjecture of the second author concerning the relationship between exceptional slopes $α, β$ on the boundary of a hyperbolic knot manifold $M$ has been verified in all cases other than small Seifert filling slopes. In this paper we verify it when $α$ is a small Seifert filling slope and $β$ is a toroidal filling slope in the generic case where $M$ admits no punctured-torus fibre or semi-fibre, and there is no incompressible torus in $M(β)$ which intersects $\partial M$ in one or two components. Under these hypotheses we show that $Δ(α, β) \leq 5$. Our proof is bas…
This paper concerns the Dehn surgery construction, especially those Dehn surgeries leaving the manifold unchanged. In particular, we describe an oriented 1-cusped hyperbolic 3-manifold X with a pair of slopes r_1, r_2 such that the Dehn filled manifolds X(r_1), X(r_2) are oppositely oriented copies of the lens space L(49,18), and there is no homeomorphism h of X such that h(r_1)=h(r_2).
