The demand for safe, high-energy-density batteries has spotlighted halide solid-state electrolytes, which offer the potential for enhanced ionic mobility, electrochemical stability, and interfacial deformability. Accelerating their discovery requires extensive molecular dynamics, which has been increasingly enabled by universal machine learning interatomic potentials trained on foundational datasets. However, the dynamic softness of halides poses a stringent test of whether general-purpose models can reliably replace first-principles calculations under the highly distorted, elevated-temperature regimes necessary to probe ion transport. Here, we present AQVolt26, a dataset of 322,656 r$^2$SCAN single-point calculations for lithium halides, generated via high-temperature configurational sampling across $\sim$5K structures. We demonstrate that foundational datasets provide a strong baseline for stable halide chemistries and transfer local forces well, however absolute energy predictions degrade in distorted higher-temperature regimes. Co-training with AQVolt26 resolves this blind spot. Furthermore, incorporating Materials Project relaxation data improves near-equilibrium performance but degrades extreme-strain robustness without enhancing high-temperature force accuracy. These results demonstrate that domain-specific configurational sampling is essential for the reliable dynamic screening of halide electrolytes. Furthermore, our findings suggest that while foundational models provide a robust base, they are most effective for dynamically soft solid-state chemistries when augmented with targeted, high-temperature data. Finally, we show that near-equilibrium relaxation data serves as a task-specific complement rather than a universally beneficial addition.
Predicting Crystal Structures and Ionic Conductivities in Li$_{3}$YCl$_{6-x}$Br$_{x}$ Halide Solid Electrolytes Using a Fine-Tuned Machine Learning Interatomic Potential
Université de Bordeaux, CNRS, Bordeaux INP, ICMCB(波尔多大学,法国国家科学研究中心,波尔多国立高等电子、计算机、电信与无线电通信学院,材料化学与分子物理研究所);Réseau sur le Stockage Electrochimique de l’Energie (RS2E), CNRS FR 3459(电化学储能网络(RS2E),法国国家科学研究中心)
A Fibrous Solid Electrolyte for Lithium-ion Batteries
在这项工作中提出的新方法使用氧化物细丝/纤维代替致密的薄膜电解质,从而允许:(i)直接制造而不使用昂贵的薄膜生产技术,(ii)现有锂离子电池生产线的微小变化,以及(iii)更好的机械稳定性和电化学性能。采用静电纺丝技术制备了Li 7 La 3 Zr 2 O 12(LLZO)纤维作为电解质。利用X射线衍射(XRD)和扫描电镜(SEM)对产物的物相和形貌进行了表征。结果表明,所制备的电解液在电池安全性和性能方面是电动汽车用全固态电池的良好替代品。
Exploring the nanoscale origin of performance enhancement in Li$_{1.1}$Ni$_{0.35}$Mn$_{0.55}$O$_2$ batteries due to chemical doping
尽管由于它们的每单位成本的高能量密度和降低的环境和道德问题的组合而具有作为用于电动车辆的能量存储材料的显著潜力,但是基于层状Mn氧化物的无Co锂离子电池目前缺乏其含Co对应物的寿命和稳定性。在此,我们证明了通过化学掺杂减小该性能差距,其中Li $_{1.1}$ Ni $_{0.35}$ Mn $_{0.55}$ O $_2$在C/3倍率下实现了159 mAhg $^{-1}$的初始放电容量,并且在150次循环后实现了94.3%的相应容量保持率。随后,我们通过先进的衍射,光谱和电子显微镜技术的组合探索这种改进的纳米级起源,发现优化的掺杂分布导致表征层状Mn氧化物系统的两个组成子相之间的结构和化学相容性得到改善,从而在它们之间形成无障碍的锂离子通道。我们还直接观察到的主体化合物的结构稳定效果的表面附近,使用像差校正扫描透射电子显微镜和集成微分相衬成像。
Synergistic effects of ferromagnetic elements and LAGP solid electrolyte in suppressing and trapping polysulfide shuttle transfers in lithium-sulfur batteries
Nuclear Physics Institute (NPI) of the Czech Academy of Sciences(捷克科学院核物理研究所)
Turning Insulators into Accelerators: Deciphering the Interfacial Conductivity Boost in ZrO2-Li2ZrCl6 Composites through Machine Learning Molecular Dynamics Simulations
Recycling of beta-Li3PS4-based all-solid-state Li-ion batteries: Interactions of electrode materials and electrolyte in a dissolution-based separation process
CsCl seed layer homogenizes co-evaporated perovskite growth for high-efficiency fully textured perovskite-silicon tandem solar cells
Helmholtz-Zentrum Berlin für Materialien und Energie(亥姆霍兹柏林材料与能源中心);Department of Chemistry, Humboldt-Universität zu Berlin(柏林洪堡大学化学系);Department of Interface Science, Fritz Haber Institute of the Max Planck Society(马克斯·普朗克学会弗里茨·哈伯研究所界面科学部);Faculty of Electrical Engineering and Computer Science, Technical University Berlin(柏林工业大学电气与计算机工程学院)
Strain-Dependent Ionic Transport in Li3YCl6 Solid Electrolytes
William A. Brookshire Department of Chemical and Biomolecular Engineering, University of Houston(休斯顿大学威廉·A·布鲁克夏尔化学与生物分子工程系);Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China(电子科技大学前沿科学与工程学院)
Asymmetric Lattice Disorder Induced at Oxide Interfaces
有序-无序相变的控制是材料科学的基本挑战,支撑能量存储技术的发展,例如固体氧化物燃料电池和电池、超高温陶瓷和持久的核废料形式。目前,有前途的复合氧化物,这些应用的发展受到阻碍的界面如何影响晶格无序过程和缺陷输运的理解不足。在这里,我们探讨了局部无序的演变,在离子辐照的La $_2$ Ti $_2$ O $_7$ / SrTiO $_3$薄膜异质结使用高分辨率扫描透射电子显微镜(STEM),位置平均会聚束电子衍射(PACBED),电子能量损失谱(STEM-EELS)的组合,和\textit{ab initio}理论计算。我们观察到高度不均匀的晶格无序驱动的不对称的氧空位形成整个界面。我们的计算表明,这种不对称性的结果从两个界面组件的多面体连接和空位形成能的差异,提出了操纵功能氧化物异质结构中的晶格无序的方法。
Chalcogenide perovskite BaZrS3 thin-film electronic and optoelectronic devices by low temperature processing
由于其优异的可见光吸收和高化学稳定性,硫属钙钛矿钡锆硫化物在过去几年中作为用于光电子学的混合卤化物钙钛矿的潜在替代物而引起了显著关注。然而,BaZrS 3薄膜在1000 ℃以上的高加工温度严重限制了它们在器件应用中的潜力。在此,我们报告的BaZrS 3薄膜的合成温度低至500 ℃,通过改变化学反应途径。X射线衍射和拉曼光谱证实了BaZrS 3薄膜为单相结构。原子力显微镜和扫描电子显微镜表明,晶体尺寸和表面粗糙度一致降低退火温度。较低的温度进一步消除了与高温处理相关的硫空位和碳污染。在较低温度下合成硫属化物钙钛矿薄膜的能力消除了其器件制造的主要障碍。光电探测器表现出快速响应和80的开/关比。所制造的场效应晶体管显示出双极行为,电子和空穴迁移率分别为16.8 cm 2/Vs和2.6 cm 2/Vs。
Understanding the electrochemical performance and diffusion kinetics of HC$||$Na$_3$V$_2$(PO$_4$)$_3$/C full cell battery for energy storage applications