The interaction of high-energy electrons and X-ray photons with soft semiconductors such as halide perovskites is essential for the characterisation and understanding of these optoelectronic materials. Using nano-probe diffraction techniques, which can investigate physical properties on the nanoscale, we perform studies of the interaction of electron and X-ray radiation with state-of-the-art (FA$_{0.79}$MA$_{0.16}$Cs$_{0.05}$)Pb(I$_{0.83}$Br$_{0.17}$)$_3$ hybrid halide perovskite films (FA, formamidinium; MA, methylammonium). We track the changes in the local crystal structure as a function of fluence using scanning electron diffraction and synchrotron nano X-ray diffraction techniques. We identify perovskite grains from which additional reflections, corresponding to PbBr$_2$, appear as a crystalline degradation phase after fluences of ~200 e$^-$Å$^{-2}$. These changes are concomitant with the formation of small PbI$_2$ crystallites at the adjacent high-angle grain boundaries, with the formation of pinholes, and with a phase transition from tetragonal to cubic. A similar degradation pathway is caused by photon irradiation in nano-X-ray diffraction, suggesting common underlying mechanisms. Our approach explores the radiation limits of these materials and provides a description of the degradation pathways on the nanoscale. Addressing high-angle grain boundaries will be critical for the further improvement of halide polycrystalline film stability, especially for applications vulnerable to high-energy radiation such as space photovoltaics.
One of the most significant features of lead-halide perovskites are their ability to have comparably slow recombination despite the fact that these materials are mostly processed from solution at room temperature. The slow recombination allows achieving high open-circuit voltages when the lead-halide perovskite layers are used in solar cells. This perspective discusses the state of the art of our understanding and of experimental data with regard to recombination and open-circuit voltages in lead-halide perovskites. A special focus is put onto open questions that the community has to tackle to…
Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance catio…
Ni et al. report minimum bulk trap densities of 10^11 cm-3 and 1-4 orders change in interfacial trap densities derived from drive-level capacitance profiling of lead halide perovskites. From basic electrostatic arguments, we show that such bulk trap densities cannot be resolved for a p-i-n perovskite solar cell for the reported layer thicknesses, while the apparent interfacial charge densities are a consequence of the geometrical capacitance and of charge injection into the perovskite layer.
Halide perovskites are promising materials for light-emitting and light-harvesting applications. In this context, two-dimensional perovskites such as nanoplatelets or Ruddlesden-Popper and Dion-Jacobson layered structures are important because of their structural flexibility, electronic confinement, and better stability. This review article brings forth an extensive overview of the recent developments of two-dimensional halide perovskites both in the colloidal and non-colloidal forms. We outline the strategy to synthesize and control the shape and discuss different crystalline phases and optoe…
Perovskite solar cells (PSCs) are attracting great attention as the most promising candidate for the next generation solar cells. This is due to their low cost and high power conversion efficiency in spite of their relatively short period of development. Key components of PSCs are a variety of halide perovskites with ABX3 stoichiometry used as a photoabsorber, which brought the factual breakthrough in the field of photovoltaic (PV) technology with their outstanding optoelectronic properties. To commercialize PSCs in the near future, however, these materials need to be further improved for a be…
Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. However, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where…
Metal-halide perovskites are a versatile material platform for light-harvesting and light-emitting applications as their variable chemical composition allows the optoelectronic properties to be tailored to specific applications. Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites across wide spectral ranges. However, halide mixing has commonly been observed to result in phase segregation, which reduces excited-state transport and limits device performance. While the current emphasis lies on the development of strategies to prevent phase …
In spite of intensive studies on the chalcogenides as conventional thermoelectrics, it remains a challenge to find a proper material with high electrical but low thermal conductivities. In this work, we introduced a new class of thermoelectrics, Ge-based inorganic halide perovskites \ce{CsGeX3} (X = I, Br, Cl), which were already known as a promising candidate for photovoltaic applications. By performing the lattice-dynamics calculations and solving the Boltzmann transport equation, we revealed that these perovskites have ultralow thermal conductivities below 0.18 W m$^{-1}$ K$^{-1}$ while ver…
Metal halide perovskite-based materials have emerged over the past few decades as remarkable solution-processable opto-electronic materials with many intriguing properties and potential applications. These emerging materials have recently been considered for their promise in low-energy memory and information processing applications. In particular, their large optical cross-sections, high photoconductance contrast, large carrier diffusion lengths, and mixed electronic/ionic transport mechanisms are attractive for enabling memory elements and neuromorphic devices that are written and/or read in …
Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using soft-lithography has been used to reproduce nanostructures with enhanced functionalities. A non-invasive optical technique based on Raman and photolumines-cence (PL) spectroscopy is employed to investigate the interactive effect of the thermal and optical behaviour in surface-patterned hybrid organic-inorganic halide perovskite thin films. The thermophys-ical pr…
Organic-inorganic lead halide perovskites containing a mixture of iodide and bromide anions consistently perform better in donor-acceptor heterojunction solar cells than the standard methylammonium lead triiodide material. This observation is counterintuitive, as it is generally expected for photovoltaic materials that heterogeneities and compositional disorder cause reduced carrier diffusion length and conversion efficiency. Here, we combine ultrafast photoinduced electroabsorption and broadband fluorescence up-conversion spectroscopy measurements to scrutinize the carrier dynamics in mixed-c…
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science b…
Mixed-halide based hybrid perovskite semiconductors have attracted tremendous attention as a promising candidate for high efficient photovoltaic and light-emitting devices. However, these advanced perovskite materials may undergo phase segregation under light illumination due to halide ion migration, affecting their optoelectronic properties. Here, we report photo-excitation induced phase segregation in triple-cation mixed-halide perovskite films that yields to red-shift in photoluminescence response. We demonstrate that photo-excitation induced halide ion migration leads to the formation of s…
Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduced by fractionally changing the precursor stoichiometry. Our results highlight the profound influence of defects on the electronic landscape, exemplified by their impact on the device built-in potentia…
Hybrid lead halide perovskites with 2D stacking structures have recently emerged as promising materials for optoelectronic applications. We report a method for growing 2D nanosheets of hybrid lead halide perovskites (I, Br and Cl), with tunable lateral sizes ranging from 0.05 to 8 microns, and a structure consisting of n stacked monolayers separated by long alkylamines, tunable from bulk down to n=1. The key to obtaining such a wide range of perovskite properties hinged on utilizing the respective lead halide nanosheets as precursors in a hot-injection synthesis that afforded careful control o…
2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n' on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental …
Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS2), molybdenum-diselenide (MoSe2), tungsten-disulphide (WS2), tungsten-diselenide (WSe2), boron- nitiride (BN) and graphene monolayers on band-gap and energy stability of organic-inorganic halide perovskites. We found that MAPbI3ML deposited on BN-ML shows room temperature stability (-25 meV~300K) with an optimal bandgap …
Lead halide perovskites (MAPbX3) are known to have high refractive index and controllable bandgap, making them attractive for all-dielectric and tunable metasurfaces. Till now, perovskite metasurfaces have only been used in structural colors. More interesting meta-devices with 2π phase control are still absent. Here we experimentally demonstrate the MAPbX3 perovskite based metasurfaces with a complete control of phase shift in a reflection mode. By utilizing MAPbBr3 cut-wires as meta-atoms on a ground metal film, we find that the MAPbBr3 perovskite metasurface can produce full phase control fr…
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. Fr…
Organometallic lead halide perovskites are highly efficient materials for solar cells and other optoelectronic applications due to their high quantum efficiency and exceptional semiconducting properties. A peculiarity of these perovskites is the substantial ionic motion under external forces. Here, we reveal that electric field-and light-induced ionic motion in MAPbX3 crystals (X=Cl, Br, I and MA=CH3NH3) leads to unexpected piezoelectric-like response, an order of magnitude larger than in ferroelectric perovskite oxides. The nominal macroscopic symmetry of the crystals is broken by redistribut…
Antisolvent crystallization methods are frequently used to fabricate high-quality perovskite thin films, to produce sizable single crystals, and to synthesize nanoparticles at room temperature. However, a systematic exploration of the effect of specific antisolvents on the intrinsic stability of multicomponent metal halide perovskites has yet to be demonstrated. Here, we develop a high-throughput experimental workflow that incorporates chemical robotic synthesis, automated characterization, and machine learning techniques to explore how the choice of antisolvent affects the intrinsic stability…
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photoluminescence ring. Upon removing the illumination, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, which may be…
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in t…
We show that adding ethylenediamine (EDA) to perovskite precursor solution improves the photovoltaic device performance and material stability of high-bromide-content, methylammonium-free, formamidinium cesium lead halide perovskites FA1-xCsxPb(I1-yBry)3 which are currently of interest for perovskite-on-Si tandem solar cells. Using spectroscopy and hyperspectral microscopy, we show that the additive improves film homogeneity and suppresses the phase instability that is ubiquitous in high-Br perovskite formulations, producing films that remain stable for over 100 days in ambient conditions. Wit…
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission measurements, we determine with high accuracy the exciton binding energy and reduced mass of fully inorganic CsPbX$_3$ perovskites (X=I, Br, and an alloy of these). The well behaved (continuous) evolutio…
Epitaxial III-V semiconductor heterostructures are key components in modern microelectronics, electro-optics and optoelectronics. With superior semiconducting properties, halide perovskite materials are rising as promising candidates for coherent heterostructure devices. In this report, spinodal decomposition is proposed and experimentally implemented to produce epitaxial double heterostructures in halide perovskite system. Pristine epitaxial mixed halide perovskites rods and films were synthesized via Van der Waals epitaxy by chemical vapor deposition method. At room temperature, photon was a…
Instability of hybrid organic-inorganic halide perovskites hinders their development for photovoltaic applications. First-principle calculations are used for evaluation of a decomposition reaction enthalpy of hybrid halide perovskites, which is linked to experimentally observed degradation of device characteristics. However, simple criteria for predicting stability of halide perovskites are lacking since Goldschmidt's tolerance and octahedral geometrical factors do not fully capture formability of those perovskites. In this paper, we extend the Born-Haber cycle to partition the reaction enthal…
Using density-functional theory calculations, we analyze the optical absorption properties of lead (Pb)-free metal halide perovskites (AB$^{2+}$X$_3$) and double perovskites (AB$^+$B$^{3+}$X$_6$) (A = Cs or monovalent organic ion, B$^{2+}$ = non-Pb divalent metal, B$^+$ = monovalent metal, B$^{3+}$ = trivalent metal, X = halogen). We show that, if B$^{2+}$ is not Sn or Ge, Pb-free metal halide perovskites exhibit poor optical absorptions because of their indirect bandgap nature. Among the nine possible types of Pb-free metal halide double perovskites, six have direct bandgaps. Of these six typ…
With the rapid evolution of lead halide perovskite solar cells, there are considerable evidences that the mobile ions strongly impact their properties. However, except the activation energy, the other properties of ionic migration are mostly explored with first principle calculations. Here we investigate the migration of halide ion (vacancy) in lead bromide perovskite single crystalline microplates. In contrast to conventional studies with external bias voltages, we introduce built-in potentials into the microplates via low-energy electron beams and study the corresponding ionic migrations. By…
Understanding the intrinsic charge transport in organolead halide perovskites is essential for the development of high-efficiency photovoltaics and other optoelectronic devices. Despite the rapid advancement of the organolead halide perovskite in photovoltaic and optoelectronic applications, the intrinsic charge carrier transport in these materials remains elusive partly due to the difficulty of fabricating electrical devices and obtaining good electrical contact. Here, we report the fabrication of organolead halide perovskite microplates with monolayer graphene as low barrier electrical conta…
Perovskite stability is of the core importance and difficulty in current research and application of perovskite solar cells. Nevertheless, over the past century, the formability and stability of perovskite still relied on simplified factor based on human knowledge, such as the commonly used tolerance factor t. Combining machine learning (ML) with first-principles density functional calculations, we proposed a strategy to firstly calculate the decomposition energies, considered to be closely related to thermodynamic stability, of 354 kinds halide perovskites, establish the machine learning rela…
The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhance the lifetime and stability. Using pressure-dependent transient absorption spectroscopy, we find that the formation rates of both iodide- and bromide-rich phases in MAPb(BrxI1-x)3 reduce by two orde…
Due to their excellent optical and electrical properties as well as versatile growth and fabrication processes, lead halide perovskites have been widely considered as promising candidates for green energy and opto-electronic related applications. Here, we investigate their potential applications at infrared wavelengths by modeling the intersubband transitions in lead halide perovskite-based quantum well systems. Both single-well and double-well structures are studied and their energy levels as well as the corresponding wavefunctions and intersubband transition energies are calculated by solvin…
Organic-inorganic halide perovskite solar cells have recently attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. The reduction from three- to two-dimension (2D) promises an exciting opportunity to tune the electronic properties of organic-inorganic halide perovskites. Here, we propose first-principles density-functional theory based route to study the effect of reduced dimensionality, impurity doping, and heterostructure engineering on energy stability, band-gap and transport properties of 2D hybrid organic-inorganic halide perovskite…
Based on first-principles calculations, we show that chemically active metal ns2 lone pairs play an important role in exciton relaxation and dissociation in low-dimensional halide perovskites. We studied excited-state properties of several recently discovered luminescent all-inorganic and hybrid organic-inorganic zero-dimensional (0D) Sn and Pb halides. The results show that, despite the similarity in ground-state electronic structure between Sn and Pb halide perovskites, the chemically more active Sn2+ lone pair leads to stronger excited-state structural distortion and larger Stokes shift in …
In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trapping phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional perovskites, the nature of polaron excitations in technologically relevant 3D perovskites, and their influence on charge carrier transport, remain elusive. In this study, we used a combination of fir…
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The doping densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterparts, that are supposedly un-doped, the results raise three important questions: (i) Are the reported doping densities high enough to change the electrostatic potential distribution in the device from…
Halide perovskites have attracted increasing research attention regarding their outstanding optoelectronic applications. Owing to its low activation energy, ion migration is implicated in the long-term stability and many unusual transport behaviors of halide perovskite devices. However, precise control of the ionic transport in halide perovskite crystals remains challenging. Here we visualized and quantified the electric-field-induced halide ion migration in an axial CsPbBr$_3$-CsPbCl$_3$ nanowire heterostructure and demonstrated a solid-state ionic rectification, which is due to the non-unifo…
Using first principles calculations we show that several alkali lead halides potentially present collective ferroelectric polarization. This should occur at least at the nanoscale; it could be detected macroscopically provided it is not concealed by lattice vibrations in the temperature range of stability of the cubic perovskite phase. For potassium lead halides and for alkali lead fluorides, remarkably, the ferroelectric behavior turns hyper-ferroelectric, suggesting a more robust ferroelectric polarization in spite of depolarization potentials induced by charge accumulation on surfaces or in…
Halide perovskites are semiconductors that exhibit sharp optical absorption edges and small Urbach energies allowing for efficient collection of sunlight in thin-film photovoltaic devices. However, halide perovskites also exhibit large nuclear anharmonic effects and disorder, which is unusual for efficient optoelectronic materials and difficult to rationalize in view of the small Urbach energies that indicate a low amount of disorder. To address this important issue, the disorder potential induced for electronic states by the nuclear dynamics in various paradigmatic halide perovskites is studi…
We develop techniques to study the temperature dependent localization, thermalization, and the effects of phonon scattering on the excitons in halide perovskites from the analysis of the emission spectra. The excitonic Urbach edge, when inferred from the low energy tails of the temperature dependent luminescence spectra, is shown to be sensitive to the electron distribution and thermalization. A method to observe the Urbach focus is devised for halide perovskites where the temperature dependence of the excitonic gap is anomalous. The value of the zero-point bandgap renormalization is inferred …
Halide perovskites exhibit slow rates of non-radiative electron-hole recombination upon illumination. Chu et al. [Sci. Adv. 6 7, eaaw7453 (2020)] use the results of first-principles simulations to argue that this arises from the nature of the crystal vibrations and leads to a breakdown of Shockley-Read-Hall theory. We highlight flaws in their methodology and analysis of carrier capture by point defects in crystalline semiconductors.
The discovery of double perovskites A2B(I)B(III)X6 (A=monovalent cation; B(I)/B(III) = metal cation; X = halogen) as Pb(II)-free alternatives has attracted widespread attention, making it possible to introduce d-block metal cations (e.g., d0 and d10) into halide perovskites. However, at present, there are quite limited insights into the underlying bonding orbitals for d-block metal cation-based halide perovskites. Here, we present an orbital engineering strategy to construct two-dimensional (2D) electronic structures in three-dimensional (3D) halide perovskites by rationally controlling the d …
Despite their puzzling vibrational characteristics that include strong signatures of anharmonicity and thermal disorder already around room temperature, halide perovskites exhibit favorable optoelectronic properties for applications in photovoltaics and beyond. Whether these vibrational properties are advantageous or detrimental to their optoelectronic properties remains, however, an important open question. Here, this issue is addressed by investigation of the {finite-temperature optoelectronic properties} in the prototypical cubic CsPbBr$_3$, using first-principles molecular dynamics based o…
Here we develop a microscopic approach aimed at the description of a suite of physical effects related to carrier transport in, and the optical properties of, halide perovskites. Our theory is based on the description of the nuclear dynamics to all orders and goes beyond the common assumption of linear electron-phonon coupling in describing the carrier dynamics and band gap characteristics. When combined with first-principles calculations and applied to the prototypical MAPbI$_{3}$ system, our theory explains seemingly disparate experimental findings associated with both the charge-carrier mob…
Bulk quantum materials based on zero-dimensional (0D) lead-free organic tin halide perovskites have been developed for the first time, which give broadband Gaussian-shaped and strongly Stokes shifted emissions with quantum efficiencies of up to near-unity at room temperature due to excited state structural reorganization.
The low ionization energy of an $A$ site molecule is a very important factor, which determines the thermodynamical stability of $A$PbI$_3$ hybrid halide perovskites, while the size of the molecule governs the stable phase at room temperature and, eventually, the bandgap. It is challenging to achieve both a low ionization energy and the reasonable size for the PbI$_3$ cage to circumvent the stability issue inherent to hybrid halide perovskites. Here we propose a new three-membered charged ring radical, which demonstrates a low ionization energy that renders a good stability for its correspondin…
The electronic structure evolution of deficient halide perovskites with a general formula $(A,A')_{1+x}M_{1-x}X_{3-x}$ was investigated using the density functional theory. The focus is placed on characterization of changes in the band gap, band alignment, effective mass, and optical properties of deficient perovskites at various concentrations of defects. We uncover unusual electronic properties of the defect corresponding to a $M\!-\!X$ vacancy filled with an $A'$ cation. This defect "repels" electrons and holes producing no trap states and, in moderate quantities ($x\le0.1$), does not hinde…
