Halide perovskites have attracted increasing research attention regarding their outstanding optoelectronic applications. Owing to its low activation energy, ion migration is implicated in the long-term stability and many unusual transport behaviors of halide perovskite devices. However, precise control of the ionic transport in halide perovskite crystals remains challenging. Here we visualized and quantified the electric-field-induced halide ion migration in an axial CsPbBr$_3$-CsPbCl$_3$ nanowire heterostructure and demonstrated a solid-state ionic rectification, which is due to the non-uniform distribution of the ionic vacancies in the nanowire that results from a competition between electrical screening and their creation and destruction at the electrode interface. The asymmetric heterostructure characteristics add an additional knob to the ion-movement manipulation in the design of advanced ionic circuits with halide perovskites as building blocks.
Recently Cui et al. reported on the fabrication a p-n homojunction perovskite solar cell (PSC) using stoichiometric control of sequentially-deposited perovskite layers. The authors propose that the junction leads to an enhanced electric field in the perovskite absorber resulting in improved charge separation. In this response to Cui et al. 2019 we show that the experimental data presented in the paper does not directly support this claim. Furthermore, Cui et al.'s thesis is not compatible with the large body of existing literature showing that mobile ionic defects present in methyl-ammonium le…
Nanopores that exhibit ionic current rectification (ICR) behave like diodes, such that they transport ions more efficiently in one direction than the other. Conical nanopores have been shown to rectify ionic current, but only those with at least 500 nm in length exhibit significant ICR. Here, through the finite element method, we show how ICR of conical nanopores with length below 200 nm can be tuned by controlling individual charged surfaces i.e. inner pore surface (surface_inner), and exterior pore surfaces on the tip and base side (surface_tip and surface_base). The charged surface_inner an…
Mobile ions in hybrid perovskite semiconductors introduce a new degree of freedom to electronic devices suggesting applications beyond photovoltaics. An intuitive device model describing the interplay between ionic and electronic charge transfer is needed to unlock the full potential of the technology. We describe the perovskite-contact interfaces as transistors which couple ionic charge redistribution to energetic barriers controlling electronic injection and recombination. This reveals an amplification factor between the out of phase electronic current and the ionic current. Our findings sug…
Perovskite light emitting devices have drawn considerable attention for their favorable optoelectronic properties. High carrier mobilities make perovskites excellent candidates as host materials in electroluminescent devices. To achieve high performance in a simple single layer device, we employed a CsPbBr3 perovskite host and a novel ionic iridium complex guest along with a polyelectrolyte to demonstrate efficient light emitting electrochemical cells (PeLECs). For an optimal guest/host blend, 10600 cd/m2 luminance at 11.6 cd/A and 9.04 Lm/W are achieved at 4.1 V. These devices showed voltage-…
Nanopores in solid state membranes are a tool able to probe nanofluidic phenomena or can act as a single molecular sensor. They also have diverse applications in filtration, desalination or osmotic power generation. Many of these applications involve chemical, or hydrostatic pressure differences, which act on both the supporting membrane and the ion transport through the pore. By using pressure differences between the sides of the membrane, and an alternating current approach to probe ion transport, we investigate two distinct physical phenomena: the elastic deformation of the membrane through…
Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduced by fractionally changing the precursor stoichiometry. Our results highlight the profound influence of defects on the electronic landscape, exemplified by their impact on the device built-in potentia…
Organometallic lead halide perovskites are highly efficient materials for solar cells and other optoelectronic applications due to their high quantum efficiency and exceptional semiconducting properties. A peculiarity of these perovskites is the substantial ionic motion under external forces. Here, we reveal that electric field-and light-induced ionic motion in MAPbX3 crystals (X=Cl, Br, I and MA=CH3NH3) leads to unexpected piezoelectric-like response, an order of magnitude larger than in ferroelectric perovskite oxides. The nominal macroscopic symmetry of the crystals is broken by redistribut…
Perovskites have proven to be a promising candidate for highly-efficient solar cells, light-emitting diodes, and X-ray detectors, overcoming limitations of inorganic semiconductors. However, they are notoriously unstable. The main reason for this instability is the migration of mobile ions through the device during operation, as they are mixed ionic-electronic conductors. Here we show how measuring the capacitance in both the frequency and the time domain can be used to study ionic dynamics within perovskite-based devices, quantifying activation energy, diffusion coefficient, sign of charge, c…
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photoluminescence ring. Upon removing the illumination, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, which may be…
Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive exhibit enhanced stability. At 0.5 wt% LiPF6, devices exhibit 100 h operation at high brightness in excess of 800 cd/m2 under constant current driving, achieving a maximum luminance of 3260 cd/m2 and p…
One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the current--voltage characteristics, shown to reduce device stability against degradation and act as recombination centers within the band gap of the active layer. In the literature one finds a broad spread of reported ionic defect parameters (e.g. activation energies) for seemingly similar perovskite materials, rendering the identification of the nature of these spe…
Methylammonium lead iodide (MAPI) is the archetype of the intensively researched class of perovskites for photovoltaics. Nonetheless, even equilibrium aspects are far from being fully understood. Here we discuss equilibrium space charge effects at the MAPI/TiO2 and MAPI/Al2O3 interfaces, which are of paramount significance for solar cells. Different from the photovoltaic literature in which such built-in potentials are considered as being generated solely by electronic charge carriers, we will apply a generalized picture that considers the equilibrium distribution of both ionic and electronic …
Organic-inorganic metal halide perovskite devices have generated significant interest for LED, photodetector, and solar cell applications due to their attractive optoelectronic properties and substrate-choice flexibility1-4. These devices exhibit slow time-scale response, which have been explained by point defect migration5-6. In this work, we report the discovery of a room temperature intrinsic amplification process in methylammonium lead iodide perovskite (MAPbI3) that can be triggered by few photons, down to a single photon. The electrical properties of the material, by way of photoresponse…
Organic-inorganic perovskite light-emitting devices have recently emerged as a reliable light source. Here, we developed a Single Layer Perovskite Light-Emitting Electrochemical Cells (SL-PeLEC) with laminated free-standing Carbon Nanotube Sheet (CNT) sheets as an effective charge electron injecting cathode electrode. The structure consists of bottom ITO-on-glass as a transparent electrode, the composite of CsPbBr3:PEO:LiPF6 with additive ionic salt as an emitting layer (EML) and 5 layers of CNT aerogel sheets as a top laminated cathode . Utilizing CNT free standing sheets laminated right on t…
Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produce PeLECs of improved brightness and efficiency. In particular, we found that a single layer PeLEC from CsPbBr3:PEO:LiPF6 with 0.5% wt. LiPF6 produced highly efficient (22 cd/A) and bright (~15000 cd/…
With excellent efficiencies being reported from multiple labs across the world, device stability and the degradation mechanisms have emerged as the key aspects that could determine the future prospects of perovskite solar cells. However, the related experimental efforts remain scattered due to the lack of any unifying theoretical framework. In this context, here we provide a comprehensive analysis of ion migration effects in perovskite solar cells. Specifically, we show, for the first time, that (a) the effect of ionic charges is almost indistinguishable from that of dopant ions, (b) ion migra…
We model and simulate a nanopore sensor that selectively binds analyte ions. This binding leads to the modulation of the local concentrations of the ions of the background electrolyte (KCl), and, thus, to the modulation of the ionic current flowing through the pore. The nanopore's wall carries a bipolar charge pattern with a larger positive buffer region determining the anions as the main charge carriers and the smaller negative binding region containing binding sites. This charge pattern proved to be an appropriate one as shown by a previous comparative study of varying charge patterns (Mádai…
The emergence of halide perovskites in photovoltaics has diversified the research on this material family and extended their application towards several fields in the optoelectronics, such as photo- and ionizing-radiation-detectors. One of the most basic characterization protocols consist on measuring the dark current-voltage (J-V) curve of symmetrically contacted samples for identifying the different regimes of space-charge-limited current (SCLC). Customarily, J=C*V^n curves indicate the Mott-Gurney law when n=2, or the Child-Langmuir ballistic regime of SCLC when n=3/2. The latter can be oft…
Metal halide perovskite-based materials have emerged over the past few decades as remarkable solution-processable opto-electronic materials with many intriguing properties and potential applications. These emerging materials have recently been considered for their promise in low-energy memory and information processing applications. In particular, their large optical cross-sections, high photoconductance contrast, large carrier diffusion lengths, and mixed electronic/ionic transport mechanisms are attractive for enabling memory elements and neuromorphic devices that are written and/or read in …
Investigation of the inherent field-driven charge transport behaviour of 3D lead halide perovskites has largely remained a challenging task, owing primarily to undesirable ionic migration effects near room temperature. In addition, the presence of methylammonium in many high performing 3D perovskite compositions introduces additional instabilities, which limit reliable room temperature optoelectronic device operation. Here, we address both these challenges and demonstrate that field-effect transistors (FETs) based on methylammonium-free, mixed-metal (Pb/Sn) perovskite compositions, that are wi…
Space-charge-limited current (SCLC) measurements are used to estimate charge carrier mobilities and electronic trap densities of semiconductors by analysing the current density-voltage (JV) relationship for unipolar devices predicted by the Mott-Gurney (MG) law. However, the interpretation of SCLC measurements for metal-halide perovskites is problematic due to mobile ionic defects which redistribute to screen electrostatic fields in devices during measurements. To overcome this, an SCLC measurement protocol was recently suggested that minimises ionic charge redistribution by probing the curren…
Ionic migration in organo-halide perovskites plays an important role in operation of perovskite based solar cells and light emitting diodes. Despite the ionic migration being a reversible process, it often leads to worsening of perovskite based device performance, hysteresis in current-voltage characteristics, and phase segregation in mixed halide perovskites being as the most harmful effect. The reason is in dynamical band structure changes, which controllable engineering would solve one of the biggest challenges for development of light-emitting solar cells. Here we demonstrate controllable …
Drift-diffusion models that account for the motion of both electronic and ionic charges are important tools for explaining the hysteretic behaviour and guiding the development of metal halide perovskite solar cells. Furnishing numerical solutions to such models for realistic operating conditions is challenging owing to the extreme values of some of the parameters. In particular, those characterising (i) the short Debye lengths (giving rise to rapid changes in the solutions across narrow layers), (ii) the relatively large potential differences across devices and (iii) the disparity in timescale…
Many optoelectronic properties have been reported for lead halide perovskite polycrystalline films. However, ambiguities in the evaluation of these properties remain, especially for long-range lateral charge transport, where ionic conduction can complicate interpretation of data. Here we demonstrate a new technique to measure the long-range charge carrier mobility in such materials. We combine quasi-steady-state photo-conductivity measurements (electrical probe) with photo-induced transmission and reflection measurements (optical probe) to simultaneously evaluate the conductivity and charge ca…
Light emission and detection are the two fundamental attributes of optoelectronic communication systems. Until now, both functions have been demonstrated using the p-n diode which is exploited across a wide range of applications. However, due to the competing dynamics of carrier injection and photocarrier collection, with this device light emission and detection are realized separately by switching the direction of the applied electrical bias. Here we use mobile ions in halide perovskites to demonstrate light-emitting photodetection in either condition of applied electrical bias. Our device co…
Recent advances in colloidal synthesis methods have led to increased research focus on halide perovskites. Due to highly ionic crystal structure of perovskite materials, stability issue pops up especially against polar solvents such as water. In this study, we investigate water-driven structural evolution of CsPbBr3 by performing experiments and state-of-the-art first-principles calculations. It is seen that while optical image shows the gradual degradation of yellowish-colored CsPbBr3 structure under daylight, UV illumination reveals that the degradation of crystals takes place in two steps; …
Effect of trap states, ion migration and interfaces on carrier transport in single crystal, polycrystalline and thick film devices of halide perovskites CH$_3$NH$_3$PbX$_3$ (X= I, Br, Cl)
