Metal halide perovskites (MHPs) combine extraordinary optoelectronic properties with chemical and mechanical properties not found in their semiconductor counterparts. For instance, they exhibit optoelectronic properties on par with single-crystalline gallium arsenide yet exhibit near-zero formation energies. The small lattice energy of MHPs means they undergo a rich diversity of polymorphism near standard conditions similar to organic materials. MHPs also demonstrate ionic transport as high as state-of-the-art battery electrodes. The most widespread applications for metal halide perovskites (e.g. photovoltaics and solid-state lighting) typically view low formation energies, polymorphism, and high ion transport as a nuisance that should be eliminated. Here, we put these properties into perspective by comparing them to other technologically relevant semiconductors in order to highlight how unique this combination of properties is for semiconductors and to illustrate ways to leverage these properties in emerging applications.
One of the most significant features of lead-halide perovskites are their ability to have comparably slow recombination despite the fact that these materials are mostly processed from solution at room temperature. The slow recombination allows achieving high open-circuit voltages when the lead-halide perovskite layers are used in solar cells. This perspective discusses the state of the art of our understanding and of experimental data with regard to recombination and open-circuit voltages in lead-halide perovskites. A special focus is put onto open questions that the community has to tackle to…
Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance catio…
Ni et al. report minimum bulk trap densities of 10^11 cm-3 and 1-4 orders change in interfacial trap densities derived from drive-level capacitance profiling of lead halide perovskites. From basic electrostatic arguments, we show that such bulk trap densities cannot be resolved for a p-i-n perovskite solar cell for the reported layer thicknesses, while the apparent interfacial charge densities are a consequence of the geometrical capacitance and of charge injection into the perovskite layer.
Halide perovskites are promising materials for light-emitting and light-harvesting applications. In this context, two-dimensional perovskites such as nanoplatelets or Ruddlesden-Popper and Dion-Jacobson layered structures are important because of their structural flexibility, electronic confinement, and better stability. This review article brings forth an extensive overview of the recent developments of two-dimensional halide perovskites both in the colloidal and non-colloidal forms. We outline the strategy to synthesize and control the shape and discuss different crystalline phases and optoe…
Perovskite solar cells (PSCs) are attracting great attention as the most promising candidate for the next generation solar cells. This is due to their low cost and high power conversion efficiency in spite of their relatively short period of development. Key components of PSCs are a variety of halide perovskites with ABX3 stoichiometry used as a photoabsorber, which brought the factual breakthrough in the field of photovoltaic (PV) technology with their outstanding optoelectronic properties. To commercialize PSCs in the near future, however, these materials need to be further improved for a be…
Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. However, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where…
Metal-halide perovskites are a versatile material platform for light-harvesting and light-emitting applications as their variable chemical composition allows the optoelectronic properties to be tailored to specific applications. Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites across wide spectral ranges. However, halide mixing has commonly been observed to result in phase segregation, which reduces excited-state transport and limits device performance. While the current emphasis lies on the development of strategies to prevent phase …
In spite of intensive studies on the chalcogenides as conventional thermoelectrics, it remains a challenge to find a proper material with high electrical but low thermal conductivities. In this work, we introduced a new class of thermoelectrics, Ge-based inorganic halide perovskites \ce{CsGeX3} (X = I, Br, Cl), which were already known as a promising candidate for photovoltaic applications. By performing the lattice-dynamics calculations and solving the Boltzmann transport equation, we revealed that these perovskites have ultralow thermal conductivities below 0.18 W m$^{-1}$ K$^{-1}$ while ver…
Metal halide perovskite-based materials have emerged over the past few decades as remarkable solution-processable opto-electronic materials with many intriguing properties and potential applications. These emerging materials have recently been considered for their promise in low-energy memory and information processing applications. In particular, their large optical cross-sections, high photoconductance contrast, large carrier diffusion lengths, and mixed electronic/ionic transport mechanisms are attractive for enabling memory elements and neuromorphic devices that are written and/or read in …
Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using soft-lithography has been used to reproduce nanostructures with enhanced functionalities. A non-invasive optical technique based on Raman and photolumines-cence (PL) spectroscopy is employed to investigate the interactive effect of the thermal and optical behaviour in surface-patterned hybrid organic-inorganic halide perovskite thin films. The thermophys-ical pr…
Organic-inorganic lead halide perovskites containing a mixture of iodide and bromide anions consistently perform better in donor-acceptor heterojunction solar cells than the standard methylammonium lead triiodide material. This observation is counterintuitive, as it is generally expected for photovoltaic materials that heterogeneities and compositional disorder cause reduced carrier diffusion length and conversion efficiency. Here, we combine ultrafast photoinduced electroabsorption and broadband fluorescence up-conversion spectroscopy measurements to scrutinize the carrier dynamics in mixed-c…
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science b…
Mixed-halide based hybrid perovskite semiconductors have attracted tremendous attention as a promising candidate for high efficient photovoltaic and light-emitting devices. However, these advanced perovskite materials may undergo phase segregation under light illumination due to halide ion migration, affecting their optoelectronic properties. Here, we report photo-excitation induced phase segregation in triple-cation mixed-halide perovskite films that yields to red-shift in photoluminescence response. We demonstrate that photo-excitation induced halide ion migration leads to the formation of s…
Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduced by fractionally changing the precursor stoichiometry. Our results highlight the profound influence of defects on the electronic landscape, exemplified by their impact on the device built-in potentia…
Hybrid lead halide perovskites with 2D stacking structures have recently emerged as promising materials for optoelectronic applications. We report a method for growing 2D nanosheets of hybrid lead halide perovskites (I, Br and Cl), with tunable lateral sizes ranging from 0.05 to 8 microns, and a structure consisting of n stacked monolayers separated by long alkylamines, tunable from bulk down to n=1. The key to obtaining such a wide range of perovskite properties hinged on utilizing the respective lead halide nanosheets as precursors in a hot-injection synthesis that afforded careful control o…
2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n' on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental …
Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS2), molybdenum-diselenide (MoSe2), tungsten-disulphide (WS2), tungsten-diselenide (WSe2), boron- nitiride (BN) and graphene monolayers on band-gap and energy stability of organic-inorganic halide perovskites. We found that MAPbI3ML deposited on BN-ML shows room temperature stability (-25 meV~300K) with an optimal bandgap …
Lead halide perovskites (MAPbX3) are known to have high refractive index and controllable bandgap, making them attractive for all-dielectric and tunable metasurfaces. Till now, perovskite metasurfaces have only been used in structural colors. More interesting meta-devices with 2π phase control are still absent. Here we experimentally demonstrate the MAPbX3 perovskite based metasurfaces with a complete control of phase shift in a reflection mode. By utilizing MAPbBr3 cut-wires as meta-atoms on a ground metal film, we find that the MAPbBr3 perovskite metasurface can produce full phase control fr…
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. Fr…
Organometallic lead halide perovskites are highly efficient materials for solar cells and other optoelectronic applications due to their high quantum efficiency and exceptional semiconducting properties. A peculiarity of these perovskites is the substantial ionic motion under external forces. Here, we reveal that electric field-and light-induced ionic motion in MAPbX3 crystals (X=Cl, Br, I and MA=CH3NH3) leads to unexpected piezoelectric-like response, an order of magnitude larger than in ferroelectric perovskite oxides. The nominal macroscopic symmetry of the crystals is broken by redistribut…
Antisolvent crystallization methods are frequently used to fabricate high-quality perovskite thin films, to produce sizable single crystals, and to synthesize nanoparticles at room temperature. However, a systematic exploration of the effect of specific antisolvents on the intrinsic stability of multicomponent metal halide perovskites has yet to be demonstrated. Here, we develop a high-throughput experimental workflow that incorporates chemical robotic synthesis, automated characterization, and machine learning techniques to explore how the choice of antisolvent affects the intrinsic stability…
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photoluminescence ring. Upon removing the illumination, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, which may be…
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in t…
We show that adding ethylenediamine (EDA) to perovskite precursor solution improves the photovoltaic device performance and material stability of high-bromide-content, methylammonium-free, formamidinium cesium lead halide perovskites FA1-xCsxPb(I1-yBry)3 which are currently of interest for perovskite-on-Si tandem solar cells. Using spectroscopy and hyperspectral microscopy, we show that the additive improves film homogeneity and suppresses the phase instability that is ubiquitous in high-Br perovskite formulations, producing films that remain stable for over 100 days in ambient conditions. Wit…
The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhance the lifetime and stability. Using pressure-dependent transient absorption spectroscopy, we find that the formation rates of both iodide- and bromide-rich phases in MAPb(BrxI1-x)3 reduce by two orde…
Due to their excellent optical and electrical properties as well as versatile growth and fabrication processes, lead halide perovskites have been widely considered as promising candidates for green energy and opto-electronic related applications. Here, we investigate their potential applications at infrared wavelengths by modeling the intersubband transitions in lead halide perovskite-based quantum well systems. Both single-well and double-well structures are studied and their energy levels as well as the corresponding wavefunctions and intersubband transition energies are calculated by solvin…
In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trapping phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional perovskites, the nature of polaron excitations in technologically relevant 3D perovskites, and their influence on charge carrier transport, remain elusive. In this study, we used a combination of fir…
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The doping densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterparts, that are supposedly un-doped, the results raise three important questions: (i) Are the reported doping densities high enough to change the electrostatic potential distribution in the device from…
Halide perovskites have attracted increasing research attention regarding their outstanding optoelectronic applications. Owing to its low activation energy, ion migration is implicated in the long-term stability and many unusual transport behaviors of halide perovskite devices. However, precise control of the ionic transport in halide perovskite crystals remains challenging. Here we visualized and quantified the electric-field-induced halide ion migration in an axial CsPbBr$_3$-CsPbCl$_3$ nanowire heterostructure and demonstrated a solid-state ionic rectification, which is due to the non-unifo…
Mixed-cation Cesium-Methylammonium lead halide perovskite (CsxMA1-xPbI3-xBrx) thin-films have been used to demonstrate stable and efficient perovskite devices. However, a systematic study of the Cs incorporation on the properties of the perovskite films has not been reported. In this report, Impact of Cesium incorporation on the minority carrier recombination lifetime of Cesium-Methylammonium lead halide perovskite thin-films is studied. The lifetime for the as-deposited perovskite films decreases with increasing concentration of cesium. However, mixed cation perovskite film is more stable, sh…
We investigate the employment of carefully selected solvent additives in the processing of a commercial perovskite precursor ink and analyze their impact on the performance of organometal trihalide perovskite photovoltaic devices. We provide evidence that the use of benzaldehyde can be used as an effective method to preserve the stoichiometry of the perovskite precursors in solution. Benzaldehyde based additive engineering shows to improve perovskite solid state film morphology and device performance of trihalide perovskite based solar cells.
Recent observations indicated that the photoelectric conversion properties of perovskite materials are intimately related to the presence of superlattice structures and other unusual nanoscale features in them. The low dimensional or mixed dimensional halide perovskite family are found to be more efficient materials for device application compared to 3-dimensional halide perovskites. The emergence of perovskite solar cell has revolutionized the solar cell industry because of their flexible architecture and rapidly increased efficiency. Tuning the dielectric constant, charge separation are the …
Bulk CsEuBr$_3$ and CsEuCl$_3$ are experimentally shown to be magnetic semiconductors that order antiferromagnetically at Neel temperatures of 2.0 K and 1.0 K respectively. Given that nanoparticles and thin films of CsEuCl$_3$ have been reported to order ferromagnetically at a similar temperature, our observation of antiferromagnetic ordering in CsEuBr$_3$ and CsEuCl$_3$ expands the possible applications of halide perovskites to now include spintronic devices where both ferromagnetic and antiferromagnetic devices can be fabricated from a single material. The conclusion that CsEuCl$_3$ can be u…
The optoelectric applications, light emitters and photovoltaics, with organometallic halide perovskite materials have been decided by dynamics of charge carriers in grains on the polycrystalline thin films. Especially, polar solvent vapour recrystallizes perovskites and changes their grain sizes. In this paper, various polar solvents were evaluated with density functional theory calculation. And a stociometric treatment with these solvents which enhanced photoluminescence intensity was established. The properties of solvents which caused dramatic photoluminescence enhancement and quantum confi…
Metal-halide perovskites are rapidly emerging as solution-processable optical materials for light emitting applications. Here we adopt a plasmonic metamaterial approach to enhance photoluminescence emission and extraction of methylammonium lead iodide (MAPbI3) thin films, based on the Purcell effect. We show that hybridization of the active metal-halide film with resonant nanoscale sized slits carved into a gold film can yield more than one order of magnitude enhancement of luminescence intensity, and nearly threefold reduction of luminescence lifetime. This shows the effectiveness of resonant…
Halide perovskites is a family of semiconductor materials demonstrating prospective properties for optical cooling owing to efficient luminescence at room temperature and strong electron-phonon interaction. On the other hand, perovskite based nanophotonic designs would allow for efficient optical cooling at nanoscale. Here we propose a novel strategy for enhancement of optical cooling at nanoscale based on optical resonances engineering in halide perovskite nanoparticles. Namely, photoluminescence up-conversion efficiency in a nanoparticle is optimized via excitation of Mie-resonances both at …
Meta-optics based on optically-resonant dielectric nanostructures is a rapidly developing research field with many potential applications. Halide perovskite metasurfaces emerged recently as a novel platform for meta-optics, and they offer unique opportunities for control of light in optoelectronic devices. Here we employ the generalized Kerker conditions to overlap electric and magnetic Mie resonances in each meta-atom of MAPbBr3 perovskite metasurface and demonstrate broadband suppression of reflection down to 4%. We reveal also that metasurface nanostructuring is also beneficial for the enha…
Organic-inorganic halide perovskites recently have emerged as a promising material for highly effective light-emitting diodes (LEDs) and solar cells (SCs). Despite efficiencies of both perovskite SCs and LEDs are already among the best, the development of a perovskite dual functional device that is capable of working in these two regimes with high efficiencies is still challenging. Here we demonstrate that the dual functional device based on mixed halide perovskite CH3NH3PbBr2I can be switched from SC to LED with low threshold voltage Vth < 2 V by exposing to Sun at open circuit Voc or at smal…
Halide perovskites have emerged recently as promising materials for many applications in photovoltaics and optoelectronics. Recent studies of their optical properties suggest many novel opportunities for a design of advanced nanophotonic devices due to low-cost fabrication, high values of the refractive index, existence of excitons at room temperatures, broadband bandgap tunability, high optical gain and nonlinear response, as well as simplicity of their integration with other types of structures. This paper provides an overview of the recent progress in the study of optical effects originatin…
Lead halide-based perovskite thin films have attracted great attention due to the explosive increase in perovskite solar cell efficiencies. The same optoelectronic properties that make perovskites ideal absorber materials in solar cells are also beneficial in other light-harvesting applications and make them prime candidates as triplet sensitizers in upconversion via triplet-triplet annihilation in rubrene. In this contribution, we take advantage of long carrier lifetimes and carrier diffusion lengths in perovskite thin films, their high absorption cross sections throughout the visible spectru…
Halide perovskites are a promising optical gain media with high tunability and simple solution synthesis. In this study, two gain regimes, namely amplified spontaneous emission and random lasing, are demonstrated in same MAPbBr$_3$ halide perovskite single crystal. For this, photoluminescence is measured at a temperature of 4 K with pulsed femtosecond pumping by UV light with a 80 MHz repetition rate. Random lasing is observed in areas of the sample where a random resonator was formed due to cracks and crystal imperfections. In more homogeneous regions of the sample, the dominant regime is amp…
Meta-optics based on optically resonant all-dielectric structures is a rapidly developing research area driven by its potential applications for low-loss efficient metadevices. Active, light-emitting subwavelengh nanostructures and metasurfaces are of a particular interest for meta-optics, as they offer unique opportunities for novel types of compact light sources and nanolasers. Recently, the study of halide perovskites has attracted an enormous attention due to their exceptional optical and electrical properties. As a result, this family of materials can provide a prospective platform for mo…
Implementation of resonant colloidal nanoparticles for improving performance of organometal halide perovskites solar cells is highly prospective approach, because it is compatible with the solution processing techniques used for any organic materials. Previously, resonant metallic nanoparticles have been incorporated into perovskite solar cells for better light absorption and charge separation. However, high inherent optical losses and high reactivity of noble metals with halides in perovskites are main limiting factors for this approach. In turn, low-loss and chemically inert resonant silicon…
Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers, and have come to rival inorganic III-V group semiconductors as the material candidate for chip-scale lasers. Although electrically pumped lasing at room temperature is the ultimate goal, optically pumped continuous-wave lasing at room temperature,a prerequisite for a laser diode,has not been achieved so far. Here, we report lasing action in a surface emitting distributed feedback methylammonium lead iodide (MAPbI3) perovskite laser on silicon substrate, a…
This paper proposes a novel conceptual system of optical wireless power transfer between objects, whether stationary or in-motion. Different from the currently existing optical wireless power transfer systems, where the optical transmitter and receiver are two distinct devices, the proposed system in this paper employs a single device - an optical transceiver, which is capable of working as both light absorption and emission. This optical transceiver is fabricated from a metal halide perovskite which yields superior features such as low costs, capability of flexibly attached on curved surfaces…
