Halide perovskites are a promising optical gain media with high tunability and simple solution synthesis. In this study, two gain regimes, namely amplified spontaneous emission and random lasing, are demonstrated in same MAPbBr$_3$ halide perovskite single crystal. For this, photoluminescence is measured at a temperature of 4 K with pulsed femtosecond pumping by UV light with a 80 MHz repetition rate. Random lasing is observed in areas of the sample where a random resonator was formed due to cracks and crystal imperfections. In more homogeneous regions of the sample, the dominant regime is amplified spontaneous emission. These two regimes are reliably distinguished by the line width, the mode structure, the growth of the intensity after the threshold, and the degree of polarization of the radiation. The spectral localization of the stimulated emission well below the bound exciton resonance raises a question concerning the origin of the emission in halide perovskite lasers.
It is well known that the DX center is a kind of defect that limits the n-type doping in some tetrahedral coordinated semiconductors. It is a deep negatively charged defect complex converted from a nominal shallow donor defect, which can serve as a trap center of electrons, thus is detrimental to the performance of optoelectronic devices. Similar to the DX center, we find that a donor-yielded complex center (DY center) also exists in six-fold coordinated semiconducting materials. For example, Bi is commonly expected as a shallow n-type dopant in perovskite APbX3. However, our first-principles …
Owing to the increasing popularity of lead-based hybrid perovskites for photovoltaic (PV) applications, it is crucial to understand their defect physics and its influence on their optoelectronic properties. In this work, we simulate various point defects in pseudo-cubic structures of mixed iodide-bromide and bromide-chloride methylammonium lead perovskites with the general formula MAPbI_{3-y}Br_{y} or MAPbBr_{3-y}Cl_{y} (where y is between 0 and 3), and use first principles based density functional theory computations to study their relative formation energies and charge transition levels. We …
Lead halide perovskites (MAPbX3) are known to have high refractive index and controllable bandgap, making them attractive for all-dielectric and tunable metasurfaces. Till now, perovskite metasurfaces have only been used in structural colors. More interesting meta-devices with 2π phase control are still absent. Here we experimentally demonstrate the MAPbX3 perovskite based metasurfaces with a complete control of phase shift in a reflection mode. By utilizing MAPbBr3 cut-wires as meta-atoms on a ground metal film, we find that the MAPbBr3 perovskite metasurface can produce full phase control fr…
The dynamical and static Rashba effects in hybrid methylammonium (MA) lead halide perovskites have recently been theoretically predicted. However, only the static effect was experimentally confirmed so far. Here we report on the dynamical Rashba effect observed using snapshot transient absorption spectral imaging with 400 nm pumping for a fully encapsulated film of 20-nm-sized 3D MAPbBr3 nanocrystals. The effect causes a 240 meV splitting of the lowest-energy absorption bleaching band, initially appearing over sub-ps timescale and progressively stabilizing to 60 meV during 500 ps. The integrat…
Meta-optics based on optically-resonant dielectric nanostructures is a rapidly developing research field with many potential applications. Halide perovskite metasurfaces emerged recently as a novel platform for meta-optics, and they offer unique opportunities for control of light in optoelectronic devices. Here we employ the generalized Kerker conditions to overlap electric and magnetic Mie resonances in each meta-atom of MAPbBr3 perovskite metasurface and demonstrate broadband suppression of reflection down to 4%. We reveal also that metasurface nanostructuring is also beneficial for the enha…
Ionic migration in organo-halide perovskites plays an important role in operation of perovskite based solar cells and light emitting diodes. Despite the ionic migration being a reversible process, it often leads to worsening of perovskite based device performance, hysteresis in current-voltage characteristics, and phase segregation in mixed halide perovskites being as the most harmful effect. The reason is in dynamical band structure changes, which controllable engineering would solve one of the biggest challenges for development of light-emitting solar cells. Here we demonstrate controllable …
Recently, halide perovskites have gained significant attention from the perspective of efficient spintronics owing to Rashba effect. This effect occurs as a consequence of strong spin-orbit coupling under noncentrosymmetric environment, which can be dynamic and/or static. However, there exist intense debates on the origin of broken inversion symmetry since the halide perovskites typically crystallize into a centrosymmetric structure. In order to clarify the issue, we examine both dynamic and static effects in the all-inorganic CsPbBr3 and organic-inorganic CH3NH3PbBr3 (MAPbBr3) perovskite sing…
Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers, and have come to rival inorganic III-V group semiconductors as the material candidate for chip-scale lasers. Although electrically pumped lasing at room temperature is the ultimate goal, optically pumped continuous-wave lasing at room temperature,a prerequisite for a laser diode,has not been achieved so far. Here, we report lasing action in a surface emitting distributed feedback methylammonium lead iodide (MAPbI3) perovskite laser on silicon substrate, a…
Halide perovskites have outstanding photovoltaic properties which have been optimized through interfacial engineering. However, as these materials approach the limits imposed by the physics of semiconductor junctions, it is urgent to explore alternatives, such as the bulk photovoltaic effect, whose physical origin is different and not bound by the same limits. In this context, we focus on the flexo-photovoltaic effect, a type of bulk photovoltaic effect that was recently observed in oxides under strain gradients. We have measured the flexo-photovoltaic effect of MAPbBr3 and MAPbI3 crystals und…
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. Fr…
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufacturing, MHPs-based solar cells have become the fastest-advancing photovoltaic technology. In this regard, much of the recent work has been dominated by absorber materials based on methylammonium MHPs, …
Antisolvent crystallization methods are frequently used to fabricate high-quality perovskite thin films, to produce sizable single crystals, and to synthesize nanoparticles at room temperature. However, a systematic exploration of the effect of specific antisolvents on the intrinsic stability of multicomponent metal halide perovskites has yet to be demonstrated. Here, we develop a high-throughput experimental workflow that incorporates chemical robotic synthesis, automated characterization, and machine learning techniques to explore how the choice of antisolvent affects the intrinsic stability…
Lead-halide perovskites are highly promising for various optoelectronic applications including laser devices. However, fundamental photophysics describing the lasing behaviour in this material family have not been investigated systematically, and thus the detailed lasing mechanism remains veiled. Here, we demonstrate that an all-inorganic perovskite shows a lasing emission based on a novel principle. A series of photoluminescence experiment results reveals that the excited state of CsPbBr3 single crystal exhibits free carrier nature. In a form of microcavity, on the other hand, the CsPbBr3 sin…
Owing to their exceptional semiconducting properties, hybrid inorganic-organic perovskites show great promise as photovoltaic absorbers. In these materials, long-range diffusion of charge carriers allows for most of the photogenerated carriers to contribute to the photovoltaic efficiency. Here, time-resolved photoluminescence (PL) microscopy is used to directly probe ambipolar carrier diffusion and recombination kinetics in hybrid perovskites. This technique is applied to thin films of methylammonium lead tri-iodide MAPbI$_3$ obtained with two different fabrication routes, methylammonium lead …
Metal halide perovskites (MHPs) have become a promising candidate in a myriad of applications, such as light-emitting diodes, solar cells, lasing, photodetectors, photocatalysis, transistors, etc. This is related to the synergy of their excellent features, including high photoluminescence quantum yields, narrow and tunable emission, long charge carrier lifetimes, broad absorption spectrum along with high extinction absorptions coefficients, among others. However, the main bottleneck is the poor stability of the MHPs under ambient conditions. This is imposing severe restrictions with respect to…
Metal-halide perovskites are promising lasing materials for realization of monolithically integrated laser sources, the key components of silicon photonic integrated circuits (PICs). Perovskites can be deposited from solution and require only low temperature processing leading to significant cost reduction and enabling new PIC architectures compared to state-of-the-art lasers realized through costly and inefficient hybrid integration of III-V semiconductors. Until now however, due to the chemical sensitivity of perovskites, no microfabrication process based on optical lithography and therefore…
All-dielectric subwavelength structures utilizing Mie resonances provide a novel paradigm in nanophotonics for controlling and manipulating light. So far, only spontaneous emission enhancement was demonstrated with single dielectric nanoantennas, whereas stimulated emission was achieved only in large lattices supporting collective modes. Here, we demonstrate the first single-particle all-dielectric monolithic nanolaser driven by Mie resonances in visible and near-IR frequency range. We employ halide perovskite CsPbBr$_3$ as both gain and resonator material that provides high optical gain (up t…
