Bulk heterojunction (BHJ) organic solar cells have made remarkable inroads towards 20% efficiency, yet nonradiative recombination losses (ΔVnr) remain high compared to silicon and perovskite photovoltaics. Interfaces buried within BHJ blends hold the key to recombination losses but access to their energetic landscape underpinning charge transfer (CT) states and their disorder remain elusive. Here, we reveal the energetic landscape and CT state manifold of modern BHJs with both spatial and energetic resolutions and link the offset between singlet (ES1) and CT energy (ES1-CT) and interfacial energetic disorder with ΔVnr. We do so by locally mapping the energy distributions of modern PM6-based BHJs with IT4F, Y6 and PC71BM acceptors and combine it, for the first time, with sensitive EQE measurements, to visualize and quantify donor (D) and acceptor (A) energetics at interfaces and associated them with CT states within a modified Marcus framework. A key new ability is the identification of the specific BHJ interfaces associated with the CT manifold, including where the lowest energy CT states reside. Moreover, we quantify energy levels and electronic disorders directly at these and other interfaces and connect these contributions to the energy losses. We delineate the influences of S1-CT offset and interfacial energetic disorder on ΔVnr across morphologically varied BHJs. Our results show both factors influencing energy losses in different ways. We demonstrate that PM6:Y6 can achieve low ΔVnr by forming a nominally sharp D/A interface with exceptionally low interfacial disorder via judicious processing combined with a low S1 to CT offset. This provides a design rule to minimize ΔVnr for modern NFAs: sharp D/A interfaces with low S1 to CT offset exhibiting minimal interfacial disorder.
Charge-transfer interfaces between metal and redox arylamine molecular films: As probed with anode interfacial engineering approach in single-layer organic diodes
CTRAMER: An open source software package for correlating interfacial charge transfer rate constants with donor acceptor geometries in organic photovoltaic materials
Achieving balanced open circuit voltage and short circuit current by tuning the interfacial energetics in organic bulk heterojunction solar cells: A drift-diffusion simulation
Interfacial Coupling Controls Molecular Epitaxy of HMTP on Graphene/SiC
Masaryk University(马萨里克大学);Brno University of Technology(布尔诺理工大学);Charles University(查理大学);Institute of Physical Engineering, Brno University of Technology(布尔诺理工大学物理工程学院)
Hybrid Interface States and Spin Polarization at Ferromagnetic Metal-Organic Heterojunctions: Interface Engineering for Efficient Spin Injection in Organic Spintronics
Triboelectrification of a dense metal-organic framework for resilient mechanical energy harvesters
Multifunctional Materials & Composites (MMC) Laboratory, Department of Engineering Science, University of Oxford, United Kingdom(牛津大学工程科学系多功能材料与复合材料实验室)
Bottom-up realization of a type-II organic-TMD heterointerface: Pentacene on monolayer WS2
TU Dortmund University(多特蒙德工业大学);Institute of Physics, NAWI Graz, University of Graz(格拉茨大学NAWI格拉茨物理研究所);Institute of Solid State Physics, Friedrich Schiller University Jena(耶拿弗里德里希·席勒大学固体物理研究所);Universidad Autónoma de Madrid and IFIMAC(马德里自治大学及IFIMAC)
Enhancement of photovoltaic efficiency by insertion of a polyoxometalate layer at the anode of an organic solar cell
在这篇文章中,Wells-Dawson聚氧乙烯醚K6[P2 W 18 O 62]生长作为铟锡氧化物和聚(3-己基噻吩)(P3 HT)和[6,6]-苯基-C61-丁酸甲酯(PCBM)的体异质结之间的界面层。POM层的结构取决于厚度,并显示出高度各向异性的表面组织。薄膜的特征在于原子力显微镜和X射线光电子能谱学(XPS),以深入了解其宏观组织,更好地了解其电子性能。然后,将它们放置在P3 HT:PCBM有机太阳能电池的阳极界面上,并在光学工作台上进行表征。讨论了在有机光电池的阳极界面处的聚氧乙烯酸盐的益处方面的光伏效率。
Band Renormalization in a Metal-Organic Framework/Au(111) Triple-Lattice Heterostructure
Fudan University(复旦大学);Westlake University(西湖大学);Westlake Institute for Advanced Study(西湖高等研究院);Songshan Lake Materials Laboratory(松山湖材料实验室);Central South University(中南大学);Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences(中国科学院上海高等研究院上海同步辐射光源)
Bottom Contact Metal Oxide Interface Modification Improving the Efficiency of Organic Light Emitting Diodes
溶液处理的有机发光二极管(OLED)的性能通常受到非均匀接触的限制。在这项工作中,我们引入含镍的溶液处理的金属氧化物(MO)的界面层插入铟锡氧化物(ITO)和聚(3,4-乙撑二氧噻吩):聚(苯乙烯磺酸盐)(PEDOT:PSS),以改善底部电极接触的有机发光二极管使用聚(对苯乙炔)(PPV)衍生物超级黄色(SY)作为发光层。对于ITO/含Ni的MO/PEDOT:PSS底部电极结构,我们显示出增强的润湿性能,从而提高OLED器件的效率。使用Cu-Li共掺杂的尖晶石镍钴酸盐[(Cu-Li):NiCo 2 O 4]实现了最佳性能,其中SY OLED的电流效率和发光效率分别比ITO和PEDOT:PSS之间没有含Ni的MO界面改性的标准器件获得的值增加了12%和11%。结果表明,优化后的ITO/(Cu-Li):NiCo 2 O 4/PEDOT:PSS电极的空穴注入能力明显提高,而PEDOT:PSS电极的空穴注入能力明显增强。
Enhanced Tantalum Superconducting Resonator Performance via All-Surface Organic Monolayer Passivation
Technical University of Munich(慕尼黑工业大学);Indian Institute of Technology Roorkee(罗克基印度理工学院);Fraunhofer Institute for Electronic Microsystems and Solid State Technologies (EMFT)(弗劳恩霍夫电子微系统和固态技术研究所)
Atomic-resolution imaging of gold species at organic liquid-solid interfaces
University of Manchester(曼彻斯特大学);National Graphene Institute, University of Manchester(曼彻斯特大学国家石墨烯研究所);Diamond Light Source(英国钻石光源实验室);Max Planck−Cardiff Centre on the Fundamentals of Heterogeneous Catalysis FUNCAT, Cardiff Catalysis Institute, School of Chemistry, Cardiff University(卡迪夫大学化学学院卡迪夫催化研究所马克斯·普朗克-卡迪夫异相催化基础中心);Cardiff Catalysis Institute, School of Chemistry, Cardiff University(卡迪夫大学化学学院卡迪夫催化研究所);School of Mathematical and Physical Sciences, University of Sheffield(谢菲尔德大学数理科学学院);University of Oxford(牛津大学);Henry Royce Institute for Advanced Materials, University of Manchester(曼彻斯特大学亨利·罗伊先进材料研究所)
A Molecular Approach for Engineering Interfacial Interactions in Magnetic-Topological Insulator Heterostructures
控制磁性/拓扑绝缘体异质结构中的界面相互作用是出现新的自旋相关电子现象的主要挑战。对于任何依赖邻近效应的异质结构的合理设计,理想情况下应该保留每个组件的整体属性,同时调整界面处的相互作用。然而,在大多数无机界面相互作用太强,因此扰动,甚至淬火,在界面的每一侧的磁矩和拓扑表面状态。在这里,我们表明,这些属性可以通过使用配体化学来调整磁性离子与表面状态的相互作用来保持。通过在Bi $_2$ Te $_3$薄膜的表面上沉积Co基卟啉和酞菁单层,形成了稳健的界面,其保留了未掺杂的拓扑表面状态以及二价Co离子的原始磁矩。所选择的配体允许我们在该弱相互作用范围内调节界面杂化。这些结果,这是在与Co酞菁的相互作用诱导的Bi $_2$ Se $_3$的第一个五重层的表面状态的观察到的抑制形成鲜明对比,证明了平面金属有机分子的能力,跨越从强到弱的限制的相互作用。