We study the significance and characteristics of interfacial dynamical charge transfer at metal-organic interfaces for the organic semiconductor model system 1,4,5,8-naphthalene-tetracarboxylic dianhydride (NTCDA) on Ag(111) quantitatively. We combine infrared absorption spectroscopy and dispersion-corrected density functional theory calculations to analyze dynamic dipole moments and electron-vibron coupling at the interface. We demonstrate that interfacial dynamical charge transfer is the dominant cause of infrared activity in these systems and that it correlates with results from partial charge and density of states analysis. Nuclear motion generates an additional dynamic dipole moment but represents a minor effect except for modes with significant out-of-plane amplitudes.
In organic photovoltaics, the mechanism by which free electrons and holes are generated overcoming the Coulomb attraction is a currently much debated topic. To elucidate this mechanism at a molecular level, we carried out a combined electronic structure and quantum dynamical analysis that captures the elementary events from the exciton dissociation to the free carrier generation at polymer/fullerene donor-acceptor heterojunctions. Our calculations show that experimentally observed efficient charge separations can be explained by a combination of two effects: First, the delocalization of charge…
Non-fullerene acceptor (NFA) materials have posed new paradigms for the design of organic solar cells (OSC), whereby efficient carrier generation is obtained with small driving forces, in order to maximize the open-circuit voltage. In this paper we use a coarse-grained mixed quantum-classical method, that combines Ehrenfest and Redfield theories, to shed light on charge generation process in small energy offset interfaces. We have investigated the influence of the energetic driving force as well as the vibronic effects on the charge generation and photovoltaic energy conversion. By analyzing t…
A novel quantum dynamical method to simulate vibronic reaction dynamics in molecules at metal surfaces is proposed. The method is based on the hierarchical quantum master equation approach and uses a discrete variable representation of the nuclear degrees of freedom in combination with complex absorbing potentials and an auxiliary source term. It provides numerically exact results for a range of models. By taking the coupling to the continuum of electronic states of the surface properly into account, nonadiabatic processes can be described and the effect of electronic friction is included in a…
We investigate the electronic dynamics of model organic photovoltaic (OPV) system consisting of polyphenylene vinylene (PPV) oligomers and [6,6]-phenyl C61-butyric acid methylester (PCBM) blend using a mixed molecular mechanics/quantum mechanics (MM/QM) approach. Using a heuristic model that connects energy gap fluctuations to the average electronic couplings and decoherence times, we provide an estimate of the state-to-state internal conversion rates within the manifold of the lowest few electronic excitations. We find that the lowest few excited states of a model interface are rapidly mixed …
Discotic liquid crystalline (DLC) charge transfer (CT) complexes combine visible light absorption and rapid charge transfer characteristics within the CT complex, being favorable properties for photovoltaic (PV) applications. We present a detailed study of the electronic and vibrational properties of the prototypic 1:1 mixture of discotic 2,3,6,7,10,11-hexakishexyloxytriphenylene (HAT6) and 2,4,7-trinitro-9-fluorenone (TNF). It is shown that intermolecular charge transfer occurs in the groundstate of the complex: a charge delocalization of about 10-2 electron from the HAT6 core to TNF is deduc…
Metal-organic frameworks (MOFs) can be exceptionally good catalytic materials thanks to the presence of active metal centres and a porous structure that is advantageous for molecular adsorption and confinement. We present here a first-principles investigation of the electronic structure of a family of MOFs based on porphyrins connected through phenyl-carboxyl ligands and AlOH species, in order to assess their suitability for the photocatalysis of fuel production reactions using sunlight.
2D organic-inorganic hybrid perovskites (2DHPs) consist of alternating anionic metal-halide and cationic organic layers. They have widely tunable structural and optical properties. We review the role of the organic cation in defining the structural and optical properties of 2DHPs through example lead iodide 2DHPs. Even though excitons reside in the metal halide layers, the organic and inorganic frameworks cannot be separated-they must be considered as a single unit to fully understand the photophysics of 2DHPs. We correlate cation-induced distortion and disorder in the inorganic lattice with t…
Organic and molecule-based magnets are not easily attainable, because to introduce stable paramagnetic centers to pure organic systems is challenging. Crystalline covalent organic frameworks (COFs) with high designability and chemical diversity constitute ideal platforms to access intriguing magnetic phenomena of organic materials. In this work, we proposed a general approach to attain unpaired electron spin and metal-free magnetism in narrow-band COFs by chemical doping. By using density functional theory calculations, we found that dopants with energy-matched frontier orbitals to COFs not on…
Separation of hydrocarbons is one of the most energy demanding processes. The need to develop materials for the selective adsorption of hydrocarbons, under reasonable conditions, is therefore of paramount importance. This work unveils unexpected hydrocarbon selectivity in a flexible Metal Organic Framework (MOF), based on differences in their gate opening pressure. We show selectivity dependence on both chain length and specific framework-gas interaction. Combining Raman spectroscopy and theoretical van der Waals Density Functional (vdW-DF) calculations, the separation mechanisms governing thi…
The fine structure and temperature evolution of infrared spectra have been intensively used to probe the nature of Jahn-Teller dynamics in correlated materials. At the same time, theoretical framework to adequately extract the information on the complicated vibronic dynamics from infrared spectra is still lacking. In this work, the first-principles theory of the infrared spectra of dynamical Jahn-Teller system is developed and applied to the Mott-insulating Cs$_3$C$_{60}$. With the calculated coupling parameters for Jahn-Teller and infrared active vibrational modes, the manifestation of the dy…
Coordination chemistry relies on harnessing active metal sites within organic matrices. Polynuclear complexes - consisting of organic ligands binding to clusters of several metal atoms are of particular interest, owing to their electronic/magnetic properties and potential for functional reactivity pathways. However, their synthesis remains challenging; only a limited number of geometries and configurations have been achieved. Here, we synthesise - via supramolecular chemistry on a noble metal surface - one-dimensional metal-organic nanostructures composed of terpyridine (tpy)-based molecules c…
Hybrid materials are crucial in photovoltaics where the overall efficiency of the heterostructure is closely related to the level of charge transfer at the interface. Here, using various metal / poly(3-hexylthiophene)(P3HT) heterostructure models, we reveal that the level of spontaneous charge transfer and electronic coupling at these interfaces depend on the conformational regularity of the organic polymer deposited on the metal substrate. Using ab-initio quantum chemical calculations based on density functional theory (DFT) and heterodyne vibrational sum frequency generation (HD-VSFG) measur…
Organic semiconductors have the remarkable property that their optical excitation not only generates charge-neutral electron-hole pairs (excitons) but also charge-separated polaron pairs with high yield. The microscopic mechanisms underlying this charge separation have been debated for many years. Here we use ultrafast two-dimensional electronic spectroscopy to study the dynamics of polaron pair formation in a prototypical polymer thin film on a sub-20-fs time scale. We observe multi-period peak oscillations persisting for up to about 1 ps as distinct signatures of vibronic quantum coherence a…
Adsorption of organic molecules on well-oriented single crystal coinage metal surfaces fundamentally affects the energy distribution curve of ultra-violet photoelectron spectroscopy spectra. New features not present in the spectrum of the pristine metal can be assigned as "interface states" having some degree of molecule-substrate hybridization. Here it is shown that interface states having molecular orbital character can easily be identified at low binding energy as isolated features above the featureless substrate sp-plateau. On the other hand much care must be taken in assigning adsorbate-i…
Diamine-appended metal{organic frameworks (MOFs) of the form Mg2(dobpdc)(diamine)2 adsorb CO2 in a cooperative fashion, exhibiting an abrupt change in CO2 occupancy with pressure or temperature. This change is accompanied by hysteresis. While hysteresis is suggestive of a firstorder phase transition, we show that hysteretic temperature-occupancy curves associated with this material are qualitatively unlike the curves seen in the presence of a phase transition; they are instead consistent with CO2 chain polymerization, within one-dimensional channels in the MOF, in the absence of a phase transi…
Metal-organic frameworks (MOFs) are an attractive substrate for catalytic reactions due to the high area density of reaction sites and the ability to tailor an array of material attributes. This study focuses on a thermally stable crystalline UiO-66(Zr) MOF structure and the modulation of the electronic structure using two strategies to improve the catalytic conversion and selectivity of benzene alcohol to benzedehyate. Those two strategies include the functionalization of the organic struts with branched ligands and manually creating structural defects with unsaturated organic linkers. A comb…
In this introductory review, we give an overview of the computational chemistry methods commonly used in the field of metal-organic frameworks (MOFs), to describe or predict the structures themselves and characterize their various properties, either at the quantum chemical level or through classical molecular simulation. We discuss the methods for the prediction of crystal structures, geometrical properties and large-scale screening of hypothetical MOFs, as well as their thermal and mechanical properties. A separate section deals with the simulation of adsorption of fluids and fluid mixtures i…
Metal organic frameworks are porous materials composed of metal ions or clusters coordinated by organic molecules. As a response to applied uniaxial pressure, molecules of straight shape in the framework start to buckle. Under sufficiently low temperatures, this buckling is of quantum nature, described by a superposition of degenerate buckling states. Buckling states of adjacent molecules couple in a transverse Ising type behavior. On the example of the metal organic framework topology MOF-5 we derive the phase diagram under applied strain, showing a normal, a parabuckling, and a ferrobuckling…
Exploration of metal clusters (MCs) adaptive to both aqueous and oil phases without disturbing their size is promising for a broad scope of applications. The state-of-the-art approach via ligand-binding may perturb MC size due to varied metal-ligand binding strength when shuttling between solvents of different polarity. Herein, we applied physical confinement of a series of small noble MCs (less than 1 nm) inside ionic organic cages (I-Cages), which by means of anion exchange enables reversible transfer of MCs between aqueous and hydrophobic solutions without varying their ultrasmall size. Mor…
Using a break junction technique, we find a clear signature for the formation of conducting hybrid junctions composed of a single organic molecule (benzene, naphthalene or anthracene) connected to chains of platinum atoms. The hybrid junctions exhibit metallic-like conductance (~0.1-1G0), which is rather insensitive to further elongation by additional atoms. At low bias voltage the hybrid junctions can be elongated significantly beyond the length of the bare atomic chains. Ab initio calculations reveal that benzene based hybrid junctions have a significant binding energy and high structural fl…
Chains of Na atoms and dicyanovinyl-quinquethiophene (DCV5T-Me2) molecules with ionic bonds form a superlattice on Au(111). Through a detailed analysis of the interchain distances obtained from scanning tunneling microscopy images at various molecular coverages, we found that the chain arrangement substantially deviates from a random distribution of noninteracting chains. Instead, the distribution of chain spacings provides evidence for the existence of an interchain long-range repulsive potential. Furthermore, the experimental results can be modeled by a repulsive potential with a 1/d distanc…
