Efficiently generating grasp poses tailored to specific regions of an object is vital for various robotic manipulation tasks, especially in a dual-arm setup. This scenario presents a significant challenge due to the complex geometries involved, requiring a deep understanding of the local geometry to generate grasps efficiently on the specified constrained regions. Existing methods only explore settings involving table-top/small objects and require augmented datasets to train, limiting their performance on complex objects. We propose CGDF: Constrained Grasp Diffusion Fields, a diffusion-based grasp generative model that generalizes to objects with arbitrary geometries, as well as generates dense grasps on the target regions. CGDF uses a part-guided diffusion approach that enables it to get high sample efficiency in constrained grasping without explicitly training on massive constraint-augmented datasets. We provide qualitative and quantitative comparisons using analytical metrics and in simulation, in both unconstrained and constrained settings to show that our method can generalize to generate stable grasps on complex objects, especially useful for dual-arm manipulation settings, while existing methods struggle to do so.
NVIDIA（英伟达）；German Aerospace Center (DLR)（德国航空航天中心）；Technical University of Munich (TUM)（慕尼黑工业大学）；University of Washington（华盛顿大学）
Grasping unseen objects in unconstrained, cluttered environments is an essential skill for autonomous robotic manipulation. Despite recent progress in full 6-DoF grasp learning, existing approaches often consist of complex sequential pipelines that possess several potential failure points and run-times unsuitable for closed-loop grasping. Therefore, we propose an end-to-end network that efficiently generates a distribution of 6-DoF parallel-jaw grasps directly from a depth recording of a scene. Our novel grasp representation treats 3D points of the recorded point cloud as potential grasp conta…
Generalizing 6-DoF Grasp Detection via Domain Prior Knowledge
State Key Laboratory of Software Development Environment, Beihang University（北京航空航天大学软件开发环境国家重点实验室）；School of Computer Science and Engineering, Beihang University（北京航空航天大学计算机科学与工程学院）；School of Computer Science and Technology, Harbin Institute of Technology（哈尔滨工业大学计算机科学与技术学院）
MG-Grasp: Metric-Scale Geometric 6-DoF Grasping Framework with Sparse RGB Observations
The Department of Electronic Engineering, Tsinghua University, Beijing 100084, China（清华大学电子工程系，北京100084，中国）；The Department of Electronic and Computer Engineering, The Hong Kong University of Science and Technology, Hong Kong, China（香港科学与技术大学电子与计算机工程系，香港，中国）
University of California, Berkeley（加州大学伯克利分校）；FANUC America Corporation（发那科美国公司）
Proposing grasp poses for novel objects is an essential component for any robot manipulation task. Planning six degrees of freedom (DoF) grasps with a single camera, however, is challenging due to the complex object shape, incomplete object information, and sensor noise. In this paper, we present a 6-DoF contrastive grasp proposal network (CGPN) to infer 6-DoF grasps from a single-view depth image. First, an image encoder is used to extract the feature map from the input depth image, after which 3-DoF grasp regions are proposed from the feature map with a rotated region proposal network. Featu…
Technical University of Munich（慕尼黑工业大学）；Google（谷歌）；Johns Hopkins University（约翰斯·霍普金斯大学）
6-DoF robotic grasping is a long-lasting but unsolved problem. Recent methods utilize strong 3D networks to extract geometric grasping representations from depth sensors, demonstrating superior accuracy on common objects but perform unsatisfactorily on photometrically challenging objects, e.g., objects in transparent or reflective materials. The bottleneck lies in that the surface of these objects can not reflect back accurate depth due to the absorption or refraction of light. In this paper, in contrast to exploiting the inaccurate depth data, we propose the first RGB-only 6-DoF grasping pipe…
You Only Scan Once: A Dynamic Scene Reconstruction Pipeline for 6-DoF Robotic Grasping of Novel Objects
Advanced Robotics Centre, National University of Singapore（新加坡国立大学先进机器人中心）；Integrative Sciences and Engineering Programme, National University of Singapore Graduate School（新加坡国立大学研究生院整合科学与工程项目）
General robot grasping in clutter requires the ability to synthesize grasps that work for previously unseen objects and that are also robust to physical interactions, such as collisions with other objects in the scene. In this work, we design and train a network that predicts 6 DOF grasps from 3D scene information gathered from an on-board sensor such as a wrist-mounted depth camera. Our proposed Volumetric Grasping Network (VGN) accepts a Truncated Signed Distance Function (TSDF) representation of the scene and directly outputs the predicted grasp quality and the associated gripper orientatio…
PCF-Grasp: Converting Point Completion to Geometry Feature to Enhance 6-DoF Grasp
State Key Laboratory of Robotics and System at Harbin Institute of Technology（哈尔滨工业大学机器人系统国家重点实验室）；Lanzhou University of Technology（兰州理工大学）；Department of Computer Science（计算机科学系）；University of Liverpool（利物浦大学）
Huazhong University of Science and Technology（华中科技大学）；South East University（东南大学）
To realize a robust robotic grasping system for unknown objects in an unstructured environment, large amounts of grasp data and 3D model data for the object are required, the sizes of which directly affect the rate of successful grasps. To reduce the time cost of data acquisition and labeling and increase the rate of successful grasps, we developed a self-supervised learning mechanism to control grasp tasks performed by manipulators. First, a manipulator automatically collects the point cloud for the objects from multiple perspectives to increase the efficiency of data acquisition. The complet…
Robotic grasping aims to detect graspable points and their corresponding gripper configurations in a particular scene, and is fundamental for robot manipulation. Existing research works have demonstrated the potential of using a transformer model for robotic grasping, which can efficiently learn both global and local features. However, such methods are still limited in grasp detection on a 2D plane. In this paper, we extend a transformer model for 6-Degree-of-Freedom (6-DoF) robotic grasping, which makes it more flexible and suitable for tasks that concern safety. The key designs of our method…
South China University of Technology（华南理工大学）；Samsung, USA（三星美国）
Learning robotic grasps from visual observations is a promising yet challenging task. Recent research shows its great potential by preparing and learning from large-scale synthetic datasets. For the popular, 6 degree-of-freedom (6-DOF) grasp setting of parallel-jaw gripper, most of existing methods take the strategy of heuristically sampling grasp candidates and then evaluating them using learned scoring functions. This strategy is limited in terms of the conflict between sampling efficiency and coverage of optimal grasps. To this end, we propose in this work a novel, end-to-end \emph{Grasp Pr…
Grasping a novel target object in constrained environments (e.g., walls, bins, and shelves) requires intensive reasoning about grasp pose reachability to avoid collisions with the surrounding structures. Typical 6-DoF robotic grasping systems rely on the prior knowledge about the environment and intensive planning computation, which is ungeneralizable and inefficient. In contrast, we propose a novel Collision-Aware Reachability Predictor (CARP) for 6-DoF grasping systems. The CARP learns to estimate the collision-free probabilities for grasp poses and significantly improves grasping in challen…
École Polytechnique Fédérale de Lausanne (EPFL)（洛桑联邦理工学院）
Humans coordinate the abundant degrees of freedom (DoFs) of hands to dexterously perform tasks in everyday life. We imitate human strategies to advance the dexterity of multi-DoF robotic hands. Specifically, we enable a robot hand to grasp multiple objects by exploiting its kinematic redundancy, referring to all its controllable DoFs. We propose a human-like grasp synthesis algorithm to generate grasps using pairwise contacts on arbitrary opposing hand surface regions, no longer limited to fingertips or hand inner surface. To model the available space of the hand for grasp, we construct a reac…
Rochester Institute of Technology（罗切斯特理工学院）；OSARO Inc.（OSARO公司）
In this paper, we present a modular robotic system to tackle the problem of generating and performing antipodal robotic grasps for unknown objects from n-channel image of the scene. We propose a novel Generative Residual Convolutional Neural Network (GR-ConvNet) model that can generate robust antipodal grasps from n-channel input at real-time speeds (~20ms). We evaluate the proposed model architecture on standard datasets and a diverse set of household objects. We achieved state-of-the-art accuracy of 97.7% and 94.6% on Cornell and Jacquard grasping datasets respectively. We also demonstrate a…
Istituto Italiano di Tecnologia（意大利理工学院）；Università di Genova（热那亚大学）
The use of benchmarks is a widespread and scientifically meaningful practice to validate performance of different approaches to the same task. In the context of robot grasping the use of common object sets has emerged in recent years, however no dominant protocols and metrics to test grasping pipelines have taken root yet. In this paper, we present version 1.0 of GRASPA, a benchmark to test effectiveness of grasping pipelines on physical robot setups. This approach tackles the complexity of such pipelines by proposing different metrics that account for the features and limits of the test platf…
Harbin Institute of Technology, Shenzhen（哈尔滨工业大学（深圳））；The Chinese University of Hong Kong（香港中文大学）
In industry assembly lines, parts feeding machines are widely employed as the prologue of the whole procedure. They play the role of sorting the parts randomly placed in bins to the state with specified pose. With the help of the parts feeding machines, the subsequent assembly processes by robot arm can always start from the same condition. Thus it is expected that function of parting feeding machine and the robotic assembly can be integrated with one robot arm. This scheme can provide great flexibility and can also contribute to reduce the cost. The difficulties involved in this scheme lie in…
Generalising robotic grasping to previously unseen objects is a key task in general robotic manipulation. The current method for training many antipodal generative grasping models rely on a binary ground truth grasp map generated from the centre thirds of correctly labelled grasp rectangles. However, these binary maps do not accurately reflect the positions in which a robotic arm can correctly grasp a given object. We propose a continuous Gaussian representation of annotated grasps to generate ground truth training data which achieves a higher success rate on a simulated robotic grasping bench…
This paper presents a novel robot vision architecture for perceiving generic 3D clothes configurations. Our architecture is hierarchically structured, starting from low-level curvatures, across mid-level geometric shapes \& topology descriptions; and finally approaching high-level semantic surface structure descriptions. We demonstrate our robot vision architecture in a customised dual-arm industrial robot with our self-designed, off-the-self stereo vision system, carrying out autonomous grasping and dual-arm flattening. It is worth noting that the proposed dual-arm flattening approach is uniq…
The ability to perform in-hand manipulation still remains an unsolved problem; having this capability would allow robots to perform sophisticated tasks requiring repositioning and reorienting of grasped objects. In this work, we present a novel non-anthropomorphic robot grasper with the ability to manipulate objects by means of active surfaces at the fingertips. Active surfaces are achieved by spherical rolling fingertips with two degrees of freedom (DoF) -- a pivoting motion for surface reorientation -- and a continuous rolling motion for moving the object. A further DoF is in the base of eac…
RGBGrasp: Image-based Object Grasping by Capturing Multiple Views during Robot Arm Movement with Neural Radiance Fields
Peking University（北京大学）；Imperial College London（伦敦帝国学院）；Oxford University（牛津大学）；Tianjin University of Technology（天津理工大学）；Beijing Academy of Artificial Intelligence（北京人工智能研究院）
KGN-Pro: Keypoint-Based Grasp Prediction through Probabilistic 2D-3D Correspondence Learning
Zhejiang University（浙江大学）；Technical University of Munich（慕尼黑技术大学）；Munich Center for Machine Learning（慕尼黑机器学习中心）；The State Key Laboratory of Industrial Control Technology（工业控制技术国家重点实验室）；China Research and Development Academy of Machinery Equipment（中国机械装备研究开发院）
We present a novel approach to robotic grasp planning using both a learned grasp proposal network and a learned 3D shape reconstruction network. Our system generates 6-DOF grasps from a single RGB-D image of the target object, which is provided as input to both networks. By using the geometric reconstruction to refine the the candidate grasp produced by the grasp proposal network, our system is able to accurately grasp both known and unknown objects, even when the grasp location on the object is not visible in the input image. This paper presents the network architectures, training procedures,…
Generating grasp poses is a crucial component for any robot object manipulation task. In this work, we formulate the problem of grasp generation as sampling a set of grasps using a variational autoencoder and assess and refine the sampled grasps using a grasp evaluator model. Both Grasp Sampler and Grasp Refinement networks take 3D point clouds observed by a depth camera as input. We evaluate our approach in simulation and real-world robot experiments. Our approach achieves 88\% success rate on various commonly used objects with diverse appearances, scales, and weights. Our model is trained pu…
Peking University（北京大学）；National University of Defense Technology（国防科技大学）；Beijing Academy of Artificial Intelligence（北京人工智能研究院）
In this work, we tackle 6-DoF grasp detection for transparent and specular objects, which is an important yet challenging problem in vision-based robotic systems, due to the failure of depth cameras in sensing their geometry. We, for the first time, propose a multiview RGB-based 6-DoF grasp detection network, GraspNeRF, that leverages the generalizable neural radiance field (NeRF) to achieve material-agnostic object grasping in clutter. Compared to the existing NeRF-based 3-DoF grasp detection methods that rely on densely captured input images and time-consuming per-scene optimization, our sys…
We propose an optimization-based approach to plan power grasps. Central to our method is a reformulation of grasp planning as an infinite program under complementary constraints (IPCC), which allows contacts to happen between arbitrary pairs of points on the object and the robot gripper. We show that IPCC can be reduced to a conventional finite-dimensional nonlinear program (NLP) using a kernel-integral relaxation. Moreover, the values and Jacobian matrices of the kernel-integral can be evaluated efficiently using a modified Fast Multipole Method (FMM). We further guarantee that the planned gr…
Using synthetic data for training deep neural networks for robotic manipulation holds the promise of an almost unlimited amount of pre-labeled training data, generated safely out of harm's way. One of the key challenges of synthetic data, to date, has been to bridge the so-called reality gap, so that networks trained on synthetic data operate correctly when exposed to real-world data. We explore the reality gap in the context of 6-DoF pose estimation of known objects from a single RGB image. We show that for this problem the reality gap can be successfully spanned by a simple combination of do…
We proposed an end-to-end grasp detection network, Grasp Detection Network (GDN), cooperated with a novel coarse-to-fine (C2F) grasp representation design to detect diverse and accurate 6-DoF grasps based on point clouds. Compared to previous two-stage approaches which sample and evaluate multiple grasp candidates, our architecture is at least 20 times faster. It is also 8% and 40% more accurate in terms of the success rate in single object scenes and the complete rate in clutter scenes, respectively. Our method shows superior results among settings with different number of views and input poi…
General robotic grippers are challenging to control because of their rich nonsmooth contact dynamics and the many sources of uncertainties due to the environment or sensor noise. In this work, we demonstrate how to compute 6-DoF grasp poses using simulation-based Bayesian inference through the full stochastic forward simulation of the robot in its environment while robustly accounting for many of the uncertainties in the system. A Riemannian manifold optimization procedure preserving the nonlinearity of the rotation space is used to compute the maximum a posteriori grasp pose. Simulation and p…
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；School of Artificial Intelligence, University of Chinese Academy of Sciences（中国科学院大学人工智能学院）；CAS Center for Excellence in Brain Science and Intelligence Technology, Chinese Academy of Sciences（中国科学院脑科学与智能技术卓越创新中心）
Object grasping in cluttered scenes is a widely investigated field of robot manipulation. Most of the current works focus on estimating grasp pose from point clouds based on an efficient single-shot grasp detection network. However, due to the lack of geometry awareness of the local grasping area, it may cause severe collisions and unstable grasp configurations. In this paper, we propose a two-stage grasp pose refinement network which detects grasps globally while fine-tuning low-quality grasps and filtering noisy grasps locally. Furthermore, we extend the 6-DoF grasp with an extra dimension a…
NVIDIA（英伟达）；The Robotics Institute, CMU（卡内基梅隆大学机器人研究所）；University of Washington（华盛顿大学）
Grasping in cluttered environments is a fundamental but challenging robotic skill. It requires both reasoning about unseen object parts and potential collisions with the manipulator. Most existing data-driven approaches avoid this problem by limiting themselves to top-down planar grasps which is insufficient for many real-world scenarios and greatly limits possible grasps. We present a method that plans 6-DOF grasps for any desired object in a cluttered scene from partial point cloud observations. Our method achieves a grasp success of 80.3%, outperforming baseline approaches by 17.6% and clea…
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；School of Artificial Intelligence, University of Chinese Academy of Sciences（中国科学院大学人工智能学院）；Bytedance AI Lab（字节跳动人工智能实验室）；The Chinese University of Hong Kong（香港中文大学）
Grasping in cluttered scenes has always been a great challenge for robots, due to the requirement of the ability to well understand the scene and object information. Previous works usually assume that the geometry information of the objects is available, or utilize a step-wise, multi-stage strategy to predict the feasible 6-DoF grasp poses. In this work, we propose to formalize the 6-DoF grasp pose estimation as a simultaneous multi-task learning problem. In a unified framework, we jointly predict the feasible 6-DoF grasp poses, instance semantic segmentation, and collision information. The wh…
Qing Yuan Research Institute（庆元研究院）；MoE Key Lab of Artificial Intelligence（教育部人工智能重点实验室）；AI Institute（人工智能研究院）；Shanghai Jiao Tong University（上海交通大学）
General object grasping is an important yet unsolved problem in the field of robotics. Most of the current methods either generate grasp poses with few DoF that fail to cover most of the success grasps, or only take the unstable depth image or point cloud as input which may lead to poor results in some cases. In this paper, we propose RGBD-Grasp, a pipeline that solves this problem by decoupling 7-DoF grasp detection into two sub-tasks where RGB and depth information are processed separately. In the first stage, an encoder-decoder like convolutional neural network Angle-View Net(AVN) is propos…
Hamilton Institute（汉密尔顿研究所）；Maynooth University（梅努斯大学）
We present the Versatile Grasp Quality Convolutional Neural Network (VGQ-CNN), a grasp quality prediction network for 6-DOF grasps. VGQ-CNN can be used when evaluating grasps for objects seen from a wide range of camera poses or mobile robots without the need to retrain the network. By defining the grasp orientation explicitly as an input to the network, VGQ-CNN can evaluate 6-DOF grasp poses, moving beyond the 4-DOF grasps used in most image-based grasp evaluation methods like GQ-CNN. To train VGQ-CNN, we generate the new Versatile Grasp dataset (VG-dset) containing 6-DOF grasps observed from…
